* [PATCH] clocksource: select CLKSRC_MMIO where needed
@ 2016-01-25 16:02 ` Arnd Bergmann
0 siblings, 0 replies; 5+ messages in thread
From: Arnd Bergmann @ 2016-01-25 16:02 UTC (permalink / raw)
To: linux-arm-kernel
The Tegra clocksource implementation uses the clocksource_mmio helper
functions, but currently can be configured without them, which fails:
drivers/clocksource/built-in.o: In function `tegra20_init_timer':
:(.init.text+0xac): undefined reference to `clocksource_mmio_init'
:(.init.text+0x140): undefined reference to `clocksource_mmio_readl_up'
The same problem exists for Digicolor:
drivers/clocksource/built-in.o: In function `digicolor_timer_init':
:(.init.text+0xfa): undefined reference to `clocksource_mmio_init'
:(.init.text+0x14c): undefined reference to `clocksource_mmio_readl_down'
I've inspected the Kconfig file to look for other cases that I have not
yet run into, and added an explicit 'select' to each one to ensure we
can successfully link the drivers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/clocksource/Kconfig | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 56777f04d2d9..f70b4f3b4857 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -30,6 +30,7 @@ config CLKSRC_MMIO
config DIGICOLOR_TIMER
bool "Digicolor timer driver" if COMPILE_TEST
depends on GENERIC_CLOCKEVENTS
+ select CLKSRC_MMIO
help
Enables the support for the digicolor timer driver.
@@ -55,6 +56,7 @@ config ARMADA_370_XP_TIMER
bool "Armada 370 and XP timer driver" if COMPILE_TEST
depends on ARM
select CLKSRC_OF
+ select CLKSRC_MMIO
help
Enables the support for the Armada 370 and XP timer driver.
@@ -89,6 +91,7 @@ config SUN5I_HSTIMER
config TEGRA_TIMER
bool "Tegra timer driver" if COMPILE_TEST
+ select CLKSRC_MMIO
depends on ARM
help
Enables support for the Tegra driver.
@@ -263,6 +266,7 @@ config FSL_FTM_TIMER
config VF_PIT_TIMER
bool
+ select CLKSRC_MMIO
help
Support for Period Interrupt Timer on Freescale Vybrid Family SoCs.
@@ -394,6 +398,7 @@ config CLKSRC_ST_LPC
bool "Low power clocksource found in the LPC" if COMPILE_TEST
select CLKSRC_OF if OF
depends on HAS_IOMEM
+ select CLKSRC_MMIO
help
Enable this option to use the Low Power controller timer
as clocksource.
--
2.7.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH] clocksource: select CLKSRC_MMIO where needed
@ 2016-01-25 16:02 ` Arnd Bergmann
0 siblings, 0 replies; 5+ messages in thread
From: Arnd Bergmann @ 2016-01-25 16:02 UTC (permalink / raw)
To: Daniel Lezcano
Cc: linux-arm-kernel, Arnd Bergmann, Thomas Gleixner, linux-kernel
The Tegra clocksource implementation uses the clocksource_mmio helper
functions, but currently can be configured without them, which fails:
drivers/clocksource/built-in.o: In function `tegra20_init_timer':
:(.init.text+0xac): undefined reference to `clocksource_mmio_init'
:(.init.text+0x140): undefined reference to `clocksource_mmio_readl_up'
The same problem exists for Digicolor:
drivers/clocksource/built-in.o: In function `digicolor_timer_init':
:(.init.text+0xfa): undefined reference to `clocksource_mmio_init'
:(.init.text+0x14c): undefined reference to `clocksource_mmio_readl_down'
I've inspected the Kconfig file to look for other cases that I have not
yet run into, and added an explicit 'select' to each one to ensure we
can successfully link the drivers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
---
drivers/clocksource/Kconfig | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 56777f04d2d9..f70b4f3b4857 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -30,6 +30,7 @@ config CLKSRC_MMIO
config DIGICOLOR_TIMER
bool "Digicolor timer driver" if COMPILE_TEST
depends on GENERIC_CLOCKEVENTS
+ select CLKSRC_MMIO
help
Enables the support for the digicolor timer driver.
@@ -55,6 +56,7 @@ config ARMADA_370_XP_TIMER
bool "Armada 370 and XP timer driver" if COMPILE_TEST
depends on ARM
select CLKSRC_OF
+ select CLKSRC_MMIO
help
Enables the support for the Armada 370 and XP timer driver.
@@ -89,6 +91,7 @@ config SUN5I_HSTIMER
config TEGRA_TIMER
bool "Tegra timer driver" if COMPILE_TEST
+ select CLKSRC_MMIO
depends on ARM
help
Enables support for the Tegra driver.
@@ -263,6 +266,7 @@ config FSL_FTM_TIMER
config VF_PIT_TIMER
bool
+ select CLKSRC_MMIO
help
Support for Period Interrupt Timer on Freescale Vybrid Family SoCs.
@@ -394,6 +398,7 @@ config CLKSRC_ST_LPC
bool "Low power clocksource found in the LPC" if COMPILE_TEST
select CLKSRC_OF if OF
depends on HAS_IOMEM
+ select CLKSRC_MMIO
help
Enable this option to use the Low Power controller timer
as clocksource.
--
2.7.0
^ permalink raw reply related [flat|nested] 5+ messages in thread
* [PATCH] clocksource: select CLKSRC_MMIO where needed
2016-01-25 16:02 ` Arnd Bergmann
@ 2016-01-25 19:09 ` Baruch Siach
-1 siblings, 0 replies; 5+ messages in thread
From: Baruch Siach @ 2016-01-25 19:09 UTC (permalink / raw)
To: linux-arm-kernel
Hi Arnd,
On Mon, Jan 25, 2016 at 05:02:49PM +0100, Arnd Bergmann wrote:
> The Tegra clocksource implementation uses the clocksource_mmio helper
> functions, but currently can be configured without them, which fails:
>
> drivers/clocksource/built-in.o: In function `tegra20_init_timer':
> :(.init.text+0xac): undefined reference to `clocksource_mmio_init'
> :(.init.text+0x140): undefined reference to `clocksource_mmio_readl_up'
>
> The same problem exists for Digicolor:
>
> drivers/clocksource/built-in.o: In function `digicolor_timer_init':
> :(.init.text+0xfa): undefined reference to `clocksource_mmio_init'
> :(.init.text+0x14c): undefined reference to `clocksource_mmio_readl_down'
>
> I've inspected the Kconfig file to look for other cases that I have not
> yet run into, and added an explicit 'select' to each one to ensure we
> can successfully link the drivers.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
For Digicolor:
Acked-by: Baruch Siach <baruch@tkos.co.il>
Thanks,
baruch
--
http://baruch.siach.name/blog/ ~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- baruch at tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -
^ permalink raw reply [flat|nested] 5+ messages in thread* Re: [PATCH] clocksource: select CLKSRC_MMIO where needed
@ 2016-01-25 19:09 ` Baruch Siach
0 siblings, 0 replies; 5+ messages in thread
From: Baruch Siach @ 2016-01-25 19:09 UTC (permalink / raw)
To: Arnd Bergmann
Cc: Daniel Lezcano, Thomas Gleixner, linux-arm-kernel, linux-kernel
Hi Arnd,
On Mon, Jan 25, 2016 at 05:02:49PM +0100, Arnd Bergmann wrote:
> The Tegra clocksource implementation uses the clocksource_mmio helper
> functions, but currently can be configured without them, which fails:
>
> drivers/clocksource/built-in.o: In function `tegra20_init_timer':
> :(.init.text+0xac): undefined reference to `clocksource_mmio_init'
> :(.init.text+0x140): undefined reference to `clocksource_mmio_readl_up'
>
> The same problem exists for Digicolor:
>
> drivers/clocksource/built-in.o: In function `digicolor_timer_init':
> :(.init.text+0xfa): undefined reference to `clocksource_mmio_init'
> :(.init.text+0x14c): undefined reference to `clocksource_mmio_readl_down'
>
> I've inspected the Kconfig file to look for other cases that I have not
> yet run into, and added an explicit 'select' to each one to ensure we
> can successfully link the drivers.
>
> Signed-off-by: Arnd Bergmann <arnd@arndb.de>
For Digicolor:
Acked-by: Baruch Siach <baruch@tkos.co.il>
Thanks,
baruch
--
http://baruch.siach.name/blog/ ~. .~ Tk Open Systems
=}------------------------------------------------ooO--U--Ooo------------{=
- baruch@tkos.co.il - tel: +972.2.679.5364, http://www.tkos.co.il -
^ permalink raw reply [flat|nested] 5+ messages in thread
* [tip:timers/urgent] clocksource: Select CLKSRC_MMIO where needed
2016-01-25 16:02 ` Arnd Bergmann
(?)
(?)
@ 2016-01-26 15:40 ` tip-bot for Arnd Bergmann
-1 siblings, 0 replies; 5+ messages in thread
From: tip-bot for Arnd Bergmann @ 2016-01-26 15:40 UTC (permalink / raw)
To: linux-tip-commits; +Cc: arnd, mingo, linux-kernel, hpa, daniel.lezcano, tglx
Commit-ID: 2be6d9bfef53d185975b44fd808aece36595e83e
Gitweb: http://git.kernel.org/tip/2be6d9bfef53d185975b44fd808aece36595e83e
Author: Arnd Bergmann <arnd@arndb.de>
AuthorDate: Mon, 25 Jan 2016 17:02:49 +0100
Committer: Thomas Gleixner <tglx@linutronix.de>
CommitDate: Tue, 26 Jan 2016 16:26:07 +0100
clocksource: Select CLKSRC_MMIO where needed
The Tegra clocksource implementation uses the clocksource_mmio helper
functions, but currently can be configured without them, which fails:
drivers/clocksource/built-in.o: In function `tegra20_init_timer':
:(.init.text+0xac): undefined reference to `clocksource_mmio_init'
:(.init.text+0x140): undefined reference to `clocksource_mmio_readl_up'
The same problem exists for Digicolor:
drivers/clocksource/built-in.o: In function `digicolor_timer_init':
:(.init.text+0xfa): undefined reference to `clocksource_mmio_init'
:(.init.text+0x14c): undefined reference to `clocksource_mmio_readl_down'
I've inspected the Kconfig file to look for other cases that I have not
yet run into, and added an explicit 'select' to each one to ensure we
can successfully link the drivers.
Signed-off-by: Arnd Bergmann <arnd@arndb.de>
Cc: linux-arm-kernel@lists.infradead.org
Cc: Daniel Lezcano <daniel.lezcano@linaro.org>
Link: http://lkml.kernel.org/r/1453737776-1960372-1-git-send-email-arnd@arndb.de
Signed-off-by: Thomas Gleixner <tglx@linutronix.de>
---
drivers/clocksource/Kconfig | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/drivers/clocksource/Kconfig b/drivers/clocksource/Kconfig
index 56777f0..f70b4f3 100644
--- a/drivers/clocksource/Kconfig
+++ b/drivers/clocksource/Kconfig
@@ -30,6 +30,7 @@ config CLKSRC_MMIO
config DIGICOLOR_TIMER
bool "Digicolor timer driver" if COMPILE_TEST
depends on GENERIC_CLOCKEVENTS
+ select CLKSRC_MMIO
help
Enables the support for the digicolor timer driver.
@@ -55,6 +56,7 @@ config ARMADA_370_XP_TIMER
bool "Armada 370 and XP timer driver" if COMPILE_TEST
depends on ARM
select CLKSRC_OF
+ select CLKSRC_MMIO
help
Enables the support for the Armada 370 and XP timer driver.
@@ -89,6 +91,7 @@ config SUN5I_HSTIMER
config TEGRA_TIMER
bool "Tegra timer driver" if COMPILE_TEST
+ select CLKSRC_MMIO
depends on ARM
help
Enables support for the Tegra driver.
@@ -263,6 +266,7 @@ config FSL_FTM_TIMER
config VF_PIT_TIMER
bool
+ select CLKSRC_MMIO
help
Support for Period Interrupt Timer on Freescale Vybrid Family SoCs.
@@ -394,6 +398,7 @@ config CLKSRC_ST_LPC
bool "Low power clocksource found in the LPC" if COMPILE_TEST
select CLKSRC_OF if OF
depends on HAS_IOMEM
+ select CLKSRC_MMIO
help
Enable this option to use the Low Power controller timer
as clocksource.
^ permalink raw reply related [flat|nested] 5+ messages in thread
end of thread, other threads:[~2016-01-26 15:40 UTC | newest]
Thread overview: 5+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2016-01-25 16:02 [PATCH] clocksource: select CLKSRC_MMIO where needed Arnd Bergmann
2016-01-25 16:02 ` Arnd Bergmann
2016-01-25 19:09 ` Baruch Siach
2016-01-25 19:09 ` Baruch Siach
2016-01-26 15:40 ` [tip:timers/urgent] clocksource: Select " tip-bot for Arnd Bergmann
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.