* [PATCH v4 0/3] Add ZTE ZX296718 support
@ 2016-09-06 6:04 Jun Nie
2016-09-06 6:04 ` [PATCH v4 1/3] arm64: add ZTE ZX SoC family Jun Nie
` (2 more replies)
0 siblings, 3 replies; 9+ messages in thread
From: Jun Nie @ 2016-09-06 6:04 UTC (permalink / raw)
To: linux-arm-kernel
Changes in version4:
- Change dts file name to align with compatible name.
- Reorder dts nodes with reg address sequence.
- Move nodes out of soc, which do not have soc simple
bus address or share soc interrupt.
- Change some nodes name to align with convention.
Changes in version3:
- Remove unnecessary flag of gic in dts.
Changes in version2:
- Use more precise cpu and pmu compatible name in dts.
- fix minor coding style issue.
Jun Nie (3):
arm64: add ZTE ZX SoC family
arm64: dts: Add ZTE ZX296718 SoC dts and Makefile
arm64: defconfig: enable ZTE ZX related config
Documentation/devicetree/bindings/arm/zte.txt | 24 +++
arch/arm64/Kconfig.platforms | 5 +
arch/arm64/boot/dts/Makefile | 1 +
arch/arm64/boot/dts/zte/Makefile | 5 +
arch/arm64/boot/dts/zte/zx296718-evb.dts | 25 +++
arch/arm64/boot/dts/zte/zx296718.dtsi | 254 ++++++++++++++++++++++++++
arch/arm64/configs/defconfig | 1 +
7 files changed, 315 insertions(+)
create mode 100644 arch/arm64/boot/dts/zte/Makefile
create mode 100644 arch/arm64/boot/dts/zte/zx296718-evb.dts
create mode 100644 arch/arm64/boot/dts/zte/zx296718.dtsi
--
1.9.1
^ permalink raw reply [flat|nested] 9+ messages in thread* [PATCH v4 1/3] arm64: add ZTE ZX SoC family 2016-09-06 6:04 [PATCH v4 0/3] Add ZTE ZX296718 support Jun Nie @ 2016-09-06 6:04 ` Jun Nie 2016-09-06 6:04 ` [PATCH v4 2/3] arm64: dts: Add ZTE ZX296718 SoC dts and Makefile Jun Nie 2016-09-06 6:04 ` [PATCH v4 3/3] arm64: defconfig: enable ZTE ZX related config Jun Nie 2 siblings, 0 replies; 9+ messages in thread From: Jun Nie @ 2016-09-06 6:04 UTC (permalink / raw) To: linux-arm-kernel This patch introduces ARCH_ZX to add the support of the ZTE ZX SoC family for the arm64 architecture. Signed-off-by: Jun Nie <jun.nie@linaro.org> --- arch/arm64/Kconfig.platforms | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/arch/arm64/Kconfig.platforms b/arch/arm64/Kconfig.platforms index be5d824..bc75fd2 100644 --- a/arch/arm64/Kconfig.platforms +++ b/arch/arm64/Kconfig.platforms @@ -204,6 +204,11 @@ config ARCH_XGENE help This enables support for AppliedMicro X-Gene SOC Family +config ARCH_ZX + bool "ZTE ZX SoC Family" + help + This enables support for ZTE ZX SoC Family + config ARCH_ZYNQMP bool "Xilinx ZynqMP Family" help -- 1.9.1 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v4 2/3] arm64: dts: Add ZTE ZX296718 SoC dts and Makefile 2016-09-06 6:04 [PATCH v4 0/3] Add ZTE ZX296718 support Jun Nie 2016-09-06 6:04 ` [PATCH v4 1/3] arm64: add ZTE ZX SoC family Jun Nie @ 2016-09-06 6:04 ` Jun Nie 2016-09-08 9:11 ` Shawn Guo 2016-09-09 11:53 ` Shawn Guo 2016-09-06 6:04 ` [PATCH v4 3/3] arm64: defconfig: enable ZTE ZX related config Jun Nie 2 siblings, 2 replies; 9+ messages in thread From: Jun Nie @ 2016-09-06 6:04 UTC (permalink / raw) To: linux-arm-kernel Add device tree support for ZX296718 SoC and evaluation board based on it. Also document new values. Signed-off-by: Jun Nie <jun.nie@linaro.org> --- Documentation/devicetree/bindings/arm/zte.txt | 24 +++ arch/arm64/boot/dts/Makefile | 1 + arch/arm64/boot/dts/zte/Makefile | 5 + arch/arm64/boot/dts/zte/zx296718-evb.dts | 25 +++ arch/arm64/boot/dts/zte/zx296718.dtsi | 254 ++++++++++++++++++++++++++ 5 files changed, 309 insertions(+) create mode 100644 arch/arm64/boot/dts/zte/Makefile create mode 100644 arch/arm64/boot/dts/zte/zx296718-evb.dts create mode 100644 arch/arm64/boot/dts/zte/zx296718.dtsi diff --git a/Documentation/devicetree/bindings/arm/zte.txt b/Documentation/devicetree/bindings/arm/zte.txt index 3ff5c9e..8336978 100644 --- a/Documentation/devicetree/bindings/arm/zte.txt +++ b/Documentation/devicetree/bindings/arm/zte.txt @@ -13,3 +13,27 @@ Low power management required properties: Bus matrix required properties: - compatible = "zte,zx-bus-matrix" + + +--------------------------------------- +- ZX296718 SoC: + Required root node properties: + - compatible = "zte,zx296718" + +ZX296718 EVB board: + - "zte,zx296718-evb" + +System management required properties: + - compatible = "zte,zx296718-aon-sysctrl" + - compatible = "zte,zx296718-sysctrl" + +Example: +aon_sysctrl: aon-sysctrl at 116000 { + compatible = "zte,zx296718-aon-sysctrl", "syscon"; + reg = <0x116000 0x1000>; +}; + +sysctrl: sysctrl at 1463000 { + compatible = "zte,zx296718-sysctrl", "syscon"; + reg = <0x1463000 0x1000>; +}; diff --git a/arch/arm64/boot/dts/Makefile b/arch/arm64/boot/dts/Makefile index 6e199c9..6684f97 100644 --- a/arch/arm64/boot/dts/Makefile +++ b/arch/arm64/boot/dts/Makefile @@ -19,6 +19,7 @@ dts-dirs += socionext dts-dirs += sprd dts-dirs += xilinx dts-dirs += lg +dts-dirs += zte subdir-y := $(dts-dirs) diff --git a/arch/arm64/boot/dts/zte/Makefile b/arch/arm64/boot/dts/zte/Makefile new file mode 100644 index 0000000..6678066 --- /dev/null +++ b/arch/arm64/boot/dts/zte/Makefile @@ -0,0 +1,5 @@ +dtb-$(CONFIG_ARCH_ZX) += zx296718-evb.dtb + +always := $(dtb-y) +subdir-y := $(dts-dirs) +clean-files := *.dtb diff --git a/arch/arm64/boot/dts/zte/zx296718-evb.dts b/arch/arm64/boot/dts/zte/zx296718-evb.dts new file mode 100644 index 0000000..d7cefb4 --- /dev/null +++ b/arch/arm64/boot/dts/zte/zx296718-evb.dts @@ -0,0 +1,25 @@ +/* + * ZTE Ltd. zx296718 Plaform + * + */ +/dts-v1/; +#include "zx296718.dtsi" + +/ { + model = "ZTE zx296718 evaluation board"; + compatible = "zte,zx296718-evb", "zte,zx296718"; + + chosen { + stdout-path = "serial0:115200n8"; + }; + + memory at 40000000 { + device_type = "memory"; + reg = <0x40000000 0x40000000>; + }; + +}; + +&uart0 { + status = "okay"; +}; diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi new file mode 100644 index 0000000..c75a819 --- /dev/null +++ b/arch/arm64/boot/dts/zte/zx296718.dtsi @@ -0,0 +1,254 @@ +/* + * DTS File for ZTE ZX296718 Plaform + * + * Copyright (c) 2016 ZTE Semiconductor Co., Ltd. + */ +#include <dt-bindings/input/input.h> +#include <dt-bindings/interrupt-controller/arm-gic.h> +#include <dt-bindings/gpio/gpio.h> + +/ { + compatible = "zte,zx296718"; + #address-cells = <1>; + #size-cells = <1>; + + aliases { + serial0 = &uart0; + }; + + cpus { + #address-cells = <2>; + #size-cells = <0>; + + cpu-map { + cluster0 { + core0 { + cpu = <&cpu0>; + }; + core1 { + cpu = <&cpu1>; + }; + core2 { + cpu = <&cpu2>; + }; + core3 { + cpu = <&cpu3>; + }; + }; + }; + + cpu0: cpu at 0 { + device_type = "cpu"; + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x0>; + enable-method = "psci"; + }; + + cpu1: cpu at 1 { + device_type = "cpu"; + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x1>; + enable-method = "psci"; + }; + + cpu2: cpu at 2 { + device_type = "cpu"; + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x2>; + enable-method = "psci"; + }; + + cpu3: cpu at 3 { + device_type = "cpu"; + compatible = "arm,cortex-a53","arm,armv8"; + reg = <0x0 0x3>; + enable-method = "psci"; + }; + }; + + osc12m: osc12m-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <12000000>; + clock-output-names = "osc12m"; + }; + + osc24m: osc24m-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000000>; + clock-output-names = "osc24m"; + }; + + osc25m: osc25m-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + clock-output-names = "osc25m"; + }; + + clk24k: clk-24k { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <24000>; + clock-output-names = "rtcclk"; + }; + + osc32k: osc32k-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <32000>; + clock-output-names = "osc32k"; + }; + + osc60m: osc60m-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <60000000>; + clock-output-names = "osc60m"; + }; + + osc99m: osc99m-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <99000000>; + clock-output-names = "osc99m"; + }; + + osc125m: osc125m-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <125000000>; + clock-output-names = "osc125m"; + }; + + osc198m: osc198m-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <198000000>; + clock-output-names = "osc198m"; + }; + + pll_vga: pll-1073m-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1073000000>; + clock-output-names = "pll_vga"; + }; + + pll_ddr: pll-932m-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <932000000>; + clock-output-names = "pll_ddr"; + }; + + pll_mac: pll-1000m-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1000000000>; + clock-output-names = "pll_mac"; + }; + + pll_mm0: pll-1188m-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1188000000>; + clock-output-names = "pll_mm0"; + }; + + pll_mm1: pll-1296m-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <1296000000>; + clock-output-names = "pll_mm1"; + }; + + pll_audio: pll-884m-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <884000000>; + clock-output-names = "pll_audio"; + }; + + pll_hsic: pll-960m-clk { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <960000000>; + clock-output-names = "pll_hsic"; + }; + + psci { + compatible = "arm,psci-1.0"; + method = "smc"; + }; + + soc { + #address-cells = <1>; + #size-cells = <1>; + compatible = "simple-bus"; + interrupt-parent = <&gic>; + ranges; + + timer { + compatible = "arm,armv8-timer"; + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; + }; + + pmu { + compatible = "arm,cortex-a53-pmu"; + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; + }; + + aon_sysctrl: aon-sysctrl at 116000 { + compatible = "zte,zx296718-aon-sysctrl", "syscon"; + reg = <0x116000 0x1000>; + }; + + uart0: uart at 11f000 { + compatible = "arm,pl011", "arm,primecell"; + arm,primecell-periphid = <0x001feffe>; + reg = <0x11f000 0x1000>; + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24m>; + clock-names = "apb_pclk"; + status = "disabled"; + }; + + dma: dma-controller at 1460000 { + compatible = "zte,zx296702-dma"; + reg = <0x01460000 0x1000>; + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; + clocks = <&osc24m>; + clock-names = "dmaclk"; + #dma-cells = <1>; + dma-channels = <32>; + dma-requests = <32>; + }; + + sysctrl: sysctrl at 1463000 { + compatible = "zte,zx296718-sysctrl", "syscon"; + reg = <0x1463000 0x1000>; + }; + + gic: interrupt-controller at 2a00000 { + compatible = "arm,gic-v3"; + #interrupt-cells = <3>; + #address-cells = <0>; + #redistributor-regions = <6>; + redistributor-stride = <0x0 0x40000>; + interrupt-controller; + reg = <0x02a00000 0x10000>, + <0x02b00000 0x20000>, + <0x02b20000 0x20000>, + <0x02b40000 0x20000>, + <0x02b60000 0x20000>, + <0x02b80000 0x20000>, + <0x02ba0000 0x20000>; + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; + }; + }; +}; -- 1.9.1 ^ permalink raw reply related [flat|nested] 9+ messages in thread
* [PATCH v4 2/3] arm64: dts: Add ZTE ZX296718 SoC dts and Makefile 2016-09-06 6:04 ` [PATCH v4 2/3] arm64: dts: Add ZTE ZX296718 SoC dts and Makefile Jun Nie @ 2016-09-08 9:11 ` Shawn Guo 2016-09-12 7:13 ` Jun Nie 2016-09-09 11:53 ` Shawn Guo 1 sibling, 1 reply; 9+ messages in thread From: Shawn Guo @ 2016-09-08 9:11 UTC (permalink / raw) To: linux-arm-kernel This version looks pretty good to me. Some nit-picks below though ... On Tue, Sep 06, 2016 at 02:04:20PM +0800, Jun Nie wrote: > Add device tree support for ZX296718 SoC and evaluation board based on it. Please wrap the commit log around column 70. > Also document new values. > > Signed-off-by: Jun Nie <jun.nie@linaro.org> > --- > Documentation/devicetree/bindings/arm/zte.txt | 24 +++ > arch/arm64/boot/dts/Makefile | 1 + > arch/arm64/boot/dts/zte/Makefile | 5 + > arch/arm64/boot/dts/zte/zx296718-evb.dts | 25 +++ > arch/arm64/boot/dts/zte/zx296718.dtsi | 254 ++++++++++++++++++++++++++ > 5 files changed, 309 insertions(+) > create mode 100644 arch/arm64/boot/dts/zte/Makefile > create mode 100644 arch/arm64/boot/dts/zte/zx296718-evb.dts > create mode 100644 arch/arm64/boot/dts/zte/zx296718.dtsi <snip> > diff --git a/arch/arm64/boot/dts/zte/Makefile b/arch/arm64/boot/dts/zte/Makefile > new file mode 100644 > index 0000000..6678066 > --- /dev/null > +++ b/arch/arm64/boot/dts/zte/Makefile > @@ -0,0 +1,5 @@ > +dtb-$(CONFIG_ARCH_ZX) += zx296718-evb.dtb > + > +always := $(dtb-y) > +subdir-y := $(dts-dirs) > +clean-files := *.dtb > diff --git a/arch/arm64/boot/dts/zte/zx296718-evb.dts b/arch/arm64/boot/dts/zte/zx296718-evb.dts > new file mode 100644 > index 0000000..d7cefb4 > --- /dev/null > +++ b/arch/arm64/boot/dts/zte/zx296718-evb.dts > @@ -0,0 +1,25 @@ > +/* > + * ZTE Ltd. zx296718 Plaform > + * > + */ We should probably consider to add a proper licence. GPL/X11 dual is mostly used and recommended, and there are quite a lot examples in the DTS folder. > +/dts-v1/; > +#include "zx296718.dtsi" > + > +/ { > + model = "ZTE zx296718 evaluation board"; > + compatible = "zte,zx296718-evb", "zte,zx296718"; > + > + chosen { > + stdout-path = "serial0:115200n8"; > + }; > + > + memory at 40000000 { > + device_type = "memory"; > + reg = <0x40000000 0x40000000>; > + }; > + > +}; > + > +&uart0 { > + status = "okay"; > +}; > diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi > new file mode 100644 > index 0000000..c75a819 > --- /dev/null > +++ b/arch/arm64/boot/dts/zte/zx296718.dtsi > @@ -0,0 +1,254 @@ > +/* > + * DTS File for ZTE ZX296718 Plaform > + * > + * Copyright (c) 2016 ZTE Semiconductor Co., Ltd. > + */ Ditto > +#include <dt-bindings/input/input.h> > +#include <dt-bindings/interrupt-controller/arm-gic.h> > +#include <dt-bindings/gpio/gpio.h> > + > +/ { > + compatible = "zte,zx296718"; > + #address-cells = <1>; > + #size-cells = <1>; > + > + aliases { > + serial0 = &uart0; > + }; > + > + cpus { > + #address-cells = <2>; > + #size-cells = <0>; > + > + cpu-map { > + cluster0 { > + core0 { > + cpu = <&cpu0>; > + }; > + core1 { > + cpu = <&cpu1>; > + }; > + core2 { > + cpu = <&cpu2>; > + }; > + core3 { > + cpu = <&cpu3>; > + }; > + }; > + }; > + > + cpu0: cpu at 0 { > + device_type = "cpu"; > + compatible = "arm,cortex-a53","arm,armv8"; > + reg = <0x0 0x0>; > + enable-method = "psci"; > + }; > + > + cpu1: cpu at 1 { > + device_type = "cpu"; > + compatible = "arm,cortex-a53","arm,armv8"; > + reg = <0x0 0x1>; > + enable-method = "psci"; > + }; > + > + cpu2: cpu at 2 { > + device_type = "cpu"; > + compatible = "arm,cortex-a53","arm,armv8"; > + reg = <0x0 0x2>; > + enable-method = "psci"; > + }; > + > + cpu3: cpu at 3 { > + device_type = "cpu"; > + compatible = "arm,cortex-a53","arm,armv8"; > + reg = <0x0 0x3>; > + enable-method = "psci"; > + }; > + }; > + > + osc12m: osc12m-clk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <12000000>; > + clock-output-names = "osc12m"; > + }; > + > + osc24m: osc24m-clk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <24000000>; > + clock-output-names = "osc24m"; > + }; > + > + osc25m: osc25m-clk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <25000000>; > + clock-output-names = "osc25m"; > + }; > + > + clk24k: clk-24k { I would suggest we name node of fixed rate clock in an unified way like clock-xxx. > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <24000>; > + clock-output-names = "rtcclk"; > + }; > + > + osc32k: osc32k-clk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <32000>; > + clock-output-names = "osc32k"; > + }; > + > + osc60m: osc60m-clk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <60000000>; > + clock-output-names = "osc60m"; > + }; > + > + osc99m: osc99m-clk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <99000000>; > + clock-output-names = "osc99m"; > + }; > + > + osc125m: osc125m-clk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <125000000>; > + clock-output-names = "osc125m"; > + }; > + > + osc198m: osc198m-clk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <198000000>; > + clock-output-names = "osc198m"; > + }; > + > + pll_vga: pll-1073m-clk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <1073000000>; > + clock-output-names = "pll_vga"; > + }; > + > + pll_ddr: pll-932m-clk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <932000000>; > + clock-output-names = "pll_ddr"; > + }; > + > + pll_mac: pll-1000m-clk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <1000000000>; > + clock-output-names = "pll_mac"; > + }; > + > + pll_mm0: pll-1188m-clk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <1188000000>; > + clock-output-names = "pll_mm0"; > + }; > + > + pll_mm1: pll-1296m-clk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <1296000000>; > + clock-output-names = "pll_mm1"; > + }; > + > + pll_audio: pll-884m-clk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <884000000>; > + clock-output-names = "pll_audio"; > + }; > + > + pll_hsic: pll-960m-clk { > + compatible = "fixed-clock"; > + #clock-cells = <0>; > + clock-frequency = <960000000>; > + clock-output-names = "pll_hsic"; > + }; Do we really have so many uncontrolled clocks with fixed rate in the SoC? Shawn ^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v4 2/3] arm64: dts: Add ZTE ZX296718 SoC dts and Makefile 2016-09-08 9:11 ` Shawn Guo @ 2016-09-12 7:13 ` Jun Nie 2016-09-12 12:14 ` Shawn Guo 0 siblings, 1 reply; 9+ messages in thread From: Jun Nie @ 2016-09-12 7:13 UTC (permalink / raw) To: linux-arm-kernel 2016-09-08 17:11 GMT+08:00 Shawn Guo <shawnguo@kernel.org>: > This version looks pretty good to me. Some nit-picks below though ... > > On Tue, Sep 06, 2016 at 02:04:20PM +0800, Jun Nie wrote: >> Add device tree support for ZX296718 SoC and evaluation board based on it. > > Please wrap the commit log around column 70. > >> Also document new values. >> >> Signed-off-by: Jun Nie <jun.nie@linaro.org> >> --- >> Documentation/devicetree/bindings/arm/zte.txt | 24 +++ >> arch/arm64/boot/dts/Makefile | 1 + >> arch/arm64/boot/dts/zte/Makefile | 5 + >> arch/arm64/boot/dts/zte/zx296718-evb.dts | 25 +++ >> arch/arm64/boot/dts/zte/zx296718.dtsi | 254 ++++++++++++++++++++++++++ >> 5 files changed, 309 insertions(+) >> create mode 100644 arch/arm64/boot/dts/zte/Makefile >> create mode 100644 arch/arm64/boot/dts/zte/zx296718-evb.dts >> create mode 100644 arch/arm64/boot/dts/zte/zx296718.dtsi > > <snip> > >> diff --git a/arch/arm64/boot/dts/zte/Makefile b/arch/arm64/boot/dts/zte/Makefile >> new file mode 100644 >> index 0000000..6678066 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/zte/Makefile >> @@ -0,0 +1,5 @@ >> +dtb-$(CONFIG_ARCH_ZX) += zx296718-evb.dtb >> + >> +always := $(dtb-y) >> +subdir-y := $(dts-dirs) >> +clean-files := *.dtb >> diff --git a/arch/arm64/boot/dts/zte/zx296718-evb.dts b/arch/arm64/boot/dts/zte/zx296718-evb.dts >> new file mode 100644 >> index 0000000..d7cefb4 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/zte/zx296718-evb.dts >> @@ -0,0 +1,25 @@ >> +/* >> + * ZTE Ltd. zx296718 Plaform >> + * >> + */ > > We should probably consider to add a proper licence. GPL/X11 dual is > mostly used and recommended, and there are quite a lot examples in the > DTS folder. > Will do. >> +/dts-v1/; >> +#include "zx296718.dtsi" >> + >> +/ { >> + model = "ZTE zx296718 evaluation board"; >> + compatible = "zte,zx296718-evb", "zte,zx296718"; >> + >> + chosen { >> + stdout-path = "serial0:115200n8"; >> + }; >> + >> + memory at 40000000 { >> + device_type = "memory"; >> + reg = <0x40000000 0x40000000>; >> + }; >> + >> +}; >> + >> +&uart0 { >> + status = "okay"; >> +}; >> diff --git a/arch/arm64/boot/dts/zte/zx296718.dtsi b/arch/arm64/boot/dts/zte/zx296718.dtsi >> new file mode 100644 >> index 0000000..c75a819 >> --- /dev/null >> +++ b/arch/arm64/boot/dts/zte/zx296718.dtsi >> @@ -0,0 +1,254 @@ >> +/* >> + * DTS File for ZTE ZX296718 Plaform >> + * >> + * Copyright (c) 2016 ZTE Semiconductor Co., Ltd. >> + */ > > Ditto Will do. > >> +#include <dt-bindings/input/input.h> >> +#include <dt-bindings/interrupt-controller/arm-gic.h> >> +#include <dt-bindings/gpio/gpio.h> >> + >> +/ { >> + compatible = "zte,zx296718"; >> + #address-cells = <1>; >> + #size-cells = <1>; >> + >> + aliases { >> + serial0 = &uart0; >> + }; >> + >> + cpus { >> + #address-cells = <2>; >> + #size-cells = <0>; >> + >> + cpu-map { >> + cluster0 { >> + core0 { >> + cpu = <&cpu0>; >> + }; >> + core1 { >> + cpu = <&cpu1>; >> + }; >> + core2 { >> + cpu = <&cpu2>; >> + }; >> + core3 { >> + cpu = <&cpu3>; >> + }; >> + }; >> + }; >> + >> + cpu0: cpu at 0 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a53","arm,armv8"; >> + reg = <0x0 0x0>; >> + enable-method = "psci"; >> + }; >> + >> + cpu1: cpu at 1 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a53","arm,armv8"; >> + reg = <0x0 0x1>; >> + enable-method = "psci"; >> + }; >> + >> + cpu2: cpu at 2 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a53","arm,armv8"; >> + reg = <0x0 0x2>; >> + enable-method = "psci"; >> + }; >> + >> + cpu3: cpu at 3 { >> + device_type = "cpu"; >> + compatible = "arm,cortex-a53","arm,armv8"; >> + reg = <0x0 0x3>; >> + enable-method = "psci"; >> + }; >> + }; >> + >> + osc12m: osc12m-clk { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + clock-frequency = <12000000>; >> + clock-output-names = "osc12m"; >> + }; >> + >> + osc24m: osc24m-clk { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + clock-frequency = <24000000>; >> + clock-output-names = "osc24m"; >> + }; >> + >> + osc25m: osc25m-clk { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + clock-frequency = <25000000>; >> + clock-output-names = "osc25m"; >> + }; >> + >> + clk24k: clk-24k { > > I would suggest we name node of fixed rate clock in an unified way like > clock-xxx. > Will do. >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + clock-frequency = <24000>; >> + clock-output-names = "rtcclk"; >> + }; >> + >> + osc32k: osc32k-clk { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + clock-frequency = <32000>; >> + clock-output-names = "osc32k"; >> + }; >> + >> + osc60m: osc60m-clk { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + clock-frequency = <60000000>; >> + clock-output-names = "osc60m"; >> + }; >> + >> + osc99m: osc99m-clk { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + clock-frequency = <99000000>; >> + clock-output-names = "osc99m"; >> + }; >> + >> + osc125m: osc125m-clk { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + clock-frequency = <125000000>; >> + clock-output-names = "osc125m"; >> + }; >> + >> + osc198m: osc198m-clk { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + clock-frequency = <198000000>; >> + clock-output-names = "osc198m"; >> + }; >> + >> + pll_vga: pll-1073m-clk { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + clock-frequency = <1073000000>; >> + clock-output-names = "pll_vga"; >> + }; >> + >> + pll_ddr: pll-932m-clk { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + clock-frequency = <932000000>; >> + clock-output-names = "pll_ddr"; >> + }; >> + >> + pll_mac: pll-1000m-clk { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + clock-frequency = <1000000000>; >> + clock-output-names = "pll_mac"; >> + }; >> + >> + pll_mm0: pll-1188m-clk { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + clock-frequency = <1188000000>; >> + clock-output-names = "pll_mm0"; >> + }; >> + >> + pll_mm1: pll-1296m-clk { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + clock-frequency = <1296000000>; >> + clock-output-names = "pll_mm1"; >> + }; >> + >> + pll_audio: pll-884m-clk { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + clock-frequency = <884000000>; >> + clock-output-names = "pll_audio"; >> + }; >> + >> + pll_hsic: pll-960m-clk { >> + compatible = "fixed-clock"; >> + #clock-cells = <0>; >> + clock-frequency = <960000000>; >> + clock-output-names = "pll_hsic"; >> + }; > > Do we really have so many uncontrolled clocks with fixed rate in the > SoC? PLL clocks can be configured actually according to register. But I prefer to keep them as fixed clocks due to two reasons: 1. ZTE do not want to expose too much information of PLL. 2. All clients blocks, such as MMC and video codec, assume the related input clock's frequency as a derivation from PLL default frequency value in block clock control register description. > > Shawn ^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v4 2/3] arm64: dts: Add ZTE ZX296718 SoC dts and Makefile 2016-09-12 7:13 ` Jun Nie @ 2016-09-12 12:14 ` Shawn Guo 0 siblings, 0 replies; 9+ messages in thread From: Shawn Guo @ 2016-09-12 12:14 UTC (permalink / raw) To: linux-arm-kernel On Mon, Sep 12, 2016 at 03:13:58PM +0800, Jun Nie wrote: > PLL clocks can be configured actually according to register. But I > prefer to keep them as fixed clocks due to two reasons: > 1. ZTE do not want to expose too much information of PLL. > 2. All clients blocks, such as MMC and video codec, assume the > related input clock's frequency as a derivation from PLL default > frequency value in block clock control register description. Okay, just try to understand the reason behind it. Thanks. Shawn ^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v4 2/3] arm64: dts: Add ZTE ZX296718 SoC dts and Makefile 2016-09-06 6:04 ` [PATCH v4 2/3] arm64: dts: Add ZTE ZX296718 SoC dts and Makefile Jun Nie 2016-09-08 9:11 ` Shawn Guo @ 2016-09-09 11:53 ` Shawn Guo 2016-09-12 12:18 ` Shawn Guo 1 sibling, 1 reply; 9+ messages in thread From: Shawn Guo @ 2016-09-09 11:53 UTC (permalink / raw) To: linux-arm-kernel A bit more comments as below ... On Tue, Sep 06, 2016 at 02:04:20PM +0800, Jun Nie wrote: > + soc { > + #address-cells = <1>; > + #size-cells = <1>; > + compatible = "simple-bus"; > + interrupt-parent = <&gic>; > + ranges; > + > + timer { > + compatible = "arm,armv8-timer"; > + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, > + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, > + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, > + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; Affinity bits are missing for PPI interrupt. You can use a bit help from defines in include/dt-bindings/interrupt-controller/arm-gic.h. > + }; > + > + pmu { > + compatible = "arm,cortex-a53-pmu"; > + interrupts = <GIC_PPI 7 IRQ_TYPE_LEVEL_HIGH>; > + }; There are no unit-address for timer and pmu, so we should probably move them out of soc simple-bus and put them directly under root. > + > + aon_sysctrl: aon-sysctrl at 116000 { > + compatible = "zte,zx296718-aon-sysctrl", "syscon"; > + reg = <0x116000 0x1000>; > + }; > + > + uart0: uart at 11f000 { > + compatible = "arm,pl011", "arm,primecell"; > + arm,primecell-periphid = <0x001feffe>; > + reg = <0x11f000 0x1000>; > + interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&osc24m>; > + clock-names = "apb_pclk"; > + status = "disabled"; > + }; > + > + dma: dma-controller at 1460000 { > + compatible = "zte,zx296702-dma"; > + reg = <0x01460000 0x1000>; > + interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>; > + clocks = <&osc24m>; > + clock-names = "dmaclk"; > + #dma-cells = <1>; > + dma-channels = <32>; > + dma-requests = <32>; > + }; > + > + sysctrl: sysctrl at 1463000 { > + compatible = "zte,zx296718-sysctrl", "syscon"; > + reg = <0x1463000 0x1000>; > + }; > + > + gic: interrupt-controller at 2a00000 { > + compatible = "arm,gic-v3"; > + #interrupt-cells = <3>; > + #address-cells = <0>; > + #redistributor-regions = <6>; > + redistributor-stride = <0x0 0x40000>; > + interrupt-controller; > + reg = <0x02a00000 0x10000>, > + <0x02b00000 0x20000>, > + <0x02b20000 0x20000>, > + <0x02b40000 0x20000>, > + <0x02b60000 0x20000>, > + <0x02b80000 0x20000>, > + <0x02ba0000 0x20000>; > + interrupts = <GIC_PPI 9 IRQ_TYPE_LEVEL_HIGH>; Affinity bits are missing. Shawn > + }; > + }; > +}; > -- > 1.9.1 > > > _______________________________________________ > linux-arm-kernel mailing list > linux-arm-kernel at lists.infradead.org > http://lists.infradead.org/mailman/listinfo/linux-arm-kernel ^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v4 2/3] arm64: dts: Add ZTE ZX296718 SoC dts and Makefile 2016-09-09 11:53 ` Shawn Guo @ 2016-09-12 12:18 ` Shawn Guo 0 siblings, 0 replies; 9+ messages in thread From: Shawn Guo @ 2016-09-12 12:18 UTC (permalink / raw) To: linux-arm-kernel On Fri, Sep 09, 2016 at 07:53:36PM +0800, Shawn Guo wrote: > A bit more comments as below ... > > On Tue, Sep 06, 2016 at 02:04:20PM +0800, Jun Nie wrote: > > + soc { > > + #address-cells = <1>; > > + #size-cells = <1>; > > + compatible = "simple-bus"; > > + interrupt-parent = <&gic>; > > + ranges; > > + > > + timer { > > + compatible = "arm,armv8-timer"; > > + interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_LOW>, > > + <GIC_PPI 14 IRQ_TYPE_LEVEL_LOW>, > > + <GIC_PPI 11 IRQ_TYPE_LEVEL_LOW>, > > + <GIC_PPI 10 IRQ_TYPE_LEVEL_LOW>; > > Affinity bits are missing for PPI interrupt. You can use a bit help > from defines in include/dt-bindings/interrupt-controller/arm-gic.h. Sorry, I missed the fact that affinity bits is only required for gic-v2, while what we have here is a gic-v3. So please ignore the comment. Shawn ^ permalink raw reply [flat|nested] 9+ messages in thread
* [PATCH v4 3/3] arm64: defconfig: enable ZTE ZX related config 2016-09-06 6:04 [PATCH v4 0/3] Add ZTE ZX296718 support Jun Nie 2016-09-06 6:04 ` [PATCH v4 1/3] arm64: add ZTE ZX SoC family Jun Nie 2016-09-06 6:04 ` [PATCH v4 2/3] arm64: dts: Add ZTE ZX296718 SoC dts and Makefile Jun Nie @ 2016-09-06 6:04 ` Jun Nie 2 siblings, 0 replies; 9+ messages in thread From: Jun Nie @ 2016-09-06 6:04 UTC (permalink / raw) To: linux-arm-kernel This patch enables the configuration for the ZTE ZX family. Signed-off-by: Jun Nie <jun.nie@linaro.org> --- arch/arm64/configs/defconfig | 1 + 1 file changed, 1 insertion(+) diff --git a/arch/arm64/configs/defconfig b/arch/arm64/configs/defconfig index eadf485..2bd5c88 100644 --- a/arch/arm64/configs/defconfig +++ b/arch/arm64/configs/defconfig @@ -57,6 +57,7 @@ CONFIG_ARCH_UNIPHIER=y CONFIG_ARCH_VEXPRESS=y CONFIG_ARCH_VULCAN=y CONFIG_ARCH_XGENE=y +CONFIG_ARCH_ZX=y CONFIG_ARCH_ZYNQMP=y CONFIG_PCI=y CONFIG_PCI_MSI=y -- 1.9.1 ^ permalink raw reply related [flat|nested] 9+ messages in thread
end of thread, other threads:[~2016-09-12 12:18 UTC | newest] Thread overview: 9+ messages (download: mbox.gz follow: Atom feed -- links below jump to the message on this page -- 2016-09-06 6:04 [PATCH v4 0/3] Add ZTE ZX296718 support Jun Nie 2016-09-06 6:04 ` [PATCH v4 1/3] arm64: add ZTE ZX SoC family Jun Nie 2016-09-06 6:04 ` [PATCH v4 2/3] arm64: dts: Add ZTE ZX296718 SoC dts and Makefile Jun Nie 2016-09-08 9:11 ` Shawn Guo 2016-09-12 7:13 ` Jun Nie 2016-09-12 12:14 ` Shawn Guo 2016-09-09 11:53 ` Shawn Guo 2016-09-12 12:18 ` Shawn Guo 2016-09-06 6:04 ` [PATCH v4 3/3] arm64: defconfig: enable ZTE ZX related config Jun Nie
This is an external index of several public inboxes, see mirroring instructions on how to clone and mirror all data and code used by this external index.