From: Greg KH <gregkh@linuxfoundation.org>
To: Arnd Bergmann <arnd@arndb.de>, linux-kernel@vger.kernel.org
Cc: Johan Hovold <johan@hovoldconsulting.com>,
Rui Miguel Silva <rmfrfs@gmail.com>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Sandeep Patil <sspatil@google.com>,
Matt Porter <mporter@kernel.crashing.org>,
John Stultz <john.stultz@linaro.org>,
Rob Herring <robh@kernel.org>,
Viresh Kumar <viresh.kumar@linaro.org>,
Alex Elder <elder@linaro.org>, David Lin <dtwlin@google.com>,
"Bryan O'Donoghue" <pure.logic@nexus-software.ie>,
Vaibhav Agarwal <vaibhav.agarwal@linaro.org>,
Mark Greer <mgreer@animalcreek.com>
Subject: [patch 26/32] greybus: bridged phy sdio driver
Date: Fri, 16 Sep 2016 16:21:01 +0200 [thread overview]
Message-ID: <20160916142101.GF2040@kroah.com> (raw)
In-Reply-To: <20160916064058.GA17821@kroah.com>
This driver implements the Greybus bridged phy sdio class protocol.
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
---
drivers/greybus/sdio.c | 884 +++++++++++++++++++++++++++++++++++++++++++++++++
1 file changed, 884 insertions(+)
--- /dev/null
+++ b/drivers/greybus/sdio.c
@@ -0,0 +1,884 @@
+/*
+ * SD/MMC Greybus driver.
+ *
+ * Copyright 2014-2015 Google Inc.
+ * Copyright 2014-2015 Linaro Ltd.
+ *
+ * Released under the GPLv2 only.
+ */
+
+#include <linux/kernel.h>
+#include <linux/mmc/core.h>
+#include <linux/mmc/host.h>
+#include <linux/mmc/mmc.h>
+#include <linux/scatterlist.h>
+#include <linux/workqueue.h>
+
+#include "greybus.h"
+#include "gbphy.h"
+
+struct gb_sdio_host {
+ struct gb_connection *connection;
+ struct gbphy_device *gbphy_dev;
+ struct mmc_host *mmc;
+ struct mmc_request *mrq;
+ struct mutex lock; /* lock for this host */
+ size_t data_max;
+ spinlock_t xfer; /* lock to cancel ongoing transfer */
+ bool xfer_stop;
+ struct workqueue_struct *mrq_workqueue;
+ struct work_struct mrqwork;
+ u8 queued_events;
+ bool removed;
+ bool card_present;
+ bool read_only;
+};
+
+
+#define GB_SDIO_RSP_R1_R5_R6_R7 (GB_SDIO_RSP_PRESENT | GB_SDIO_RSP_CRC | \
+ GB_SDIO_RSP_OPCODE)
+#define GB_SDIO_RSP_R3_R4 (GB_SDIO_RSP_PRESENT)
+#define GB_SDIO_RSP_R2 (GB_SDIO_RSP_PRESENT | GB_SDIO_RSP_CRC | \
+ GB_SDIO_RSP_136)
+#define GB_SDIO_RSP_R1B (GB_SDIO_RSP_PRESENT | GB_SDIO_RSP_CRC | \
+ GB_SDIO_RSP_OPCODE | GB_SDIO_RSP_BUSY)
+
+/* kernel vdd starts at 0x80 and we need to translate to greybus ones 0x01 */
+#define GB_SDIO_VDD_SHIFT 8
+
+#ifndef MMC_CAP2_CORE_RUNTIME_PM
+#define MMC_CAP2_CORE_RUNTIME_PM 0
+#endif
+
+static inline bool single_op(struct mmc_command *cmd)
+{
+ uint32_t opcode = cmd->opcode;
+
+ return opcode == MMC_WRITE_BLOCK ||
+ opcode == MMC_READ_SINGLE_BLOCK;
+}
+
+static void _gb_sdio_set_host_caps(struct gb_sdio_host *host, u32 r)
+{
+ u32 caps = 0;
+ u32 caps2 = 0;
+
+ caps = ((r & GB_SDIO_CAP_NONREMOVABLE) ? MMC_CAP_NONREMOVABLE : 0) |
+ ((r & GB_SDIO_CAP_4_BIT_DATA) ? MMC_CAP_4_BIT_DATA : 0) |
+ ((r & GB_SDIO_CAP_8_BIT_DATA) ? MMC_CAP_8_BIT_DATA : 0) |
+ ((r & GB_SDIO_CAP_MMC_HS) ? MMC_CAP_MMC_HIGHSPEED : 0) |
+ ((r & GB_SDIO_CAP_SD_HS) ? MMC_CAP_SD_HIGHSPEED : 0) |
+ ((r & GB_SDIO_CAP_ERASE) ? MMC_CAP_ERASE : 0) |
+ ((r & GB_SDIO_CAP_1_2V_DDR) ? MMC_CAP_1_2V_DDR : 0) |
+ ((r & GB_SDIO_CAP_1_8V_DDR) ? MMC_CAP_1_8V_DDR : 0) |
+ ((r & GB_SDIO_CAP_POWER_OFF_CARD) ? MMC_CAP_POWER_OFF_CARD : 0) |
+ ((r & GB_SDIO_CAP_UHS_SDR12) ? MMC_CAP_UHS_SDR12 : 0) |
+ ((r & GB_SDIO_CAP_UHS_SDR25) ? MMC_CAP_UHS_SDR25 : 0) |
+ ((r & GB_SDIO_CAP_UHS_SDR50) ? MMC_CAP_UHS_SDR50 : 0) |
+ ((r & GB_SDIO_CAP_UHS_SDR104) ? MMC_CAP_UHS_SDR104 : 0) |
+ ((r & GB_SDIO_CAP_UHS_DDR50) ? MMC_CAP_UHS_DDR50 : 0) |
+ ((r & GB_SDIO_CAP_DRIVER_TYPE_A) ? MMC_CAP_DRIVER_TYPE_A : 0) |
+ ((r & GB_SDIO_CAP_DRIVER_TYPE_C) ? MMC_CAP_DRIVER_TYPE_C : 0) |
+ ((r & GB_SDIO_CAP_DRIVER_TYPE_D) ? MMC_CAP_DRIVER_TYPE_D : 0);
+
+ caps2 = ((r & GB_SDIO_CAP_HS200_1_2V) ? MMC_CAP2_HS200_1_2V_SDR : 0) |
+ ((r & GB_SDIO_CAP_HS400_1_2V) ? MMC_CAP2_HS400_1_2V : 0) |
+ ((r & GB_SDIO_CAP_HS400_1_8V) ? MMC_CAP2_HS400_1_8V : 0) |
+ ((r & GB_SDIO_CAP_HS200_1_8V) ? MMC_CAP2_HS200_1_8V_SDR : 0);
+
+ host->mmc->caps = caps;
+ host->mmc->caps2 = caps2 | MMC_CAP2_CORE_RUNTIME_PM;
+
+ if (caps & MMC_CAP_NONREMOVABLE)
+ host->card_present = true;
+}
+
+static u32 _gb_sdio_get_host_ocr(u32 ocr)
+{
+ return (((ocr & GB_SDIO_VDD_165_195) ? MMC_VDD_165_195 : 0) |
+ ((ocr & GB_SDIO_VDD_20_21) ? MMC_VDD_20_21 : 0) |
+ ((ocr & GB_SDIO_VDD_21_22) ? MMC_VDD_21_22 : 0) |
+ ((ocr & GB_SDIO_VDD_22_23) ? MMC_VDD_22_23 : 0) |
+ ((ocr & GB_SDIO_VDD_23_24) ? MMC_VDD_23_24 : 0) |
+ ((ocr & GB_SDIO_VDD_24_25) ? MMC_VDD_24_25 : 0) |
+ ((ocr & GB_SDIO_VDD_25_26) ? MMC_VDD_25_26 : 0) |
+ ((ocr & GB_SDIO_VDD_26_27) ? MMC_VDD_26_27 : 0) |
+ ((ocr & GB_SDIO_VDD_27_28) ? MMC_VDD_27_28 : 0) |
+ ((ocr & GB_SDIO_VDD_28_29) ? MMC_VDD_28_29 : 0) |
+ ((ocr & GB_SDIO_VDD_29_30) ? MMC_VDD_29_30 : 0) |
+ ((ocr & GB_SDIO_VDD_30_31) ? MMC_VDD_30_31 : 0) |
+ ((ocr & GB_SDIO_VDD_31_32) ? MMC_VDD_31_32 : 0) |
+ ((ocr & GB_SDIO_VDD_32_33) ? MMC_VDD_32_33 : 0) |
+ ((ocr & GB_SDIO_VDD_33_34) ? MMC_VDD_33_34 : 0) |
+ ((ocr & GB_SDIO_VDD_34_35) ? MMC_VDD_34_35 : 0) |
+ ((ocr & GB_SDIO_VDD_35_36) ? MMC_VDD_35_36 : 0)
+ );
+}
+
+static int gb_sdio_get_caps(struct gb_sdio_host *host)
+{
+ struct gb_sdio_get_caps_response response;
+ struct mmc_host *mmc = host->mmc;
+ u16 data_max;
+ u32 blksz;
+ u32 ocr;
+ u32 r;
+ int ret;
+
+ ret = gb_operation_sync(host->connection, GB_SDIO_TYPE_GET_CAPABILITIES,
+ NULL, 0, &response, sizeof(response));
+ if (ret < 0)
+ return ret;
+ r = le32_to_cpu(response.caps);
+
+ _gb_sdio_set_host_caps(host, r);
+
+ /* get the max block size that could fit our payload */
+ data_max = gb_operation_get_payload_size_max(host->connection);
+ data_max = min(data_max - sizeof(struct gb_sdio_transfer_request),
+ data_max - sizeof(struct gb_sdio_transfer_response));
+
+ blksz = min_t(u16, le16_to_cpu(response.max_blk_size), data_max);
+ blksz = max_t(u32, 512, blksz);
+
+ mmc->max_blk_size = rounddown_pow_of_two(blksz);
+ mmc->max_blk_count = le16_to_cpu(response.max_blk_count);
+ host->data_max = data_max;
+
+ /* get ocr supported values */
+ ocr = _gb_sdio_get_host_ocr(le32_to_cpu(response.ocr));
+ mmc->ocr_avail = ocr;
+ mmc->ocr_avail_sdio = mmc->ocr_avail;
+ mmc->ocr_avail_sd = mmc->ocr_avail;
+ mmc->ocr_avail_mmc = mmc->ocr_avail;
+
+ /* get frequency range values */
+ mmc->f_min = le32_to_cpu(response.f_min);
+ mmc->f_max = le32_to_cpu(response.f_max);
+
+ return 0;
+}
+
+static void _gb_queue_event(struct gb_sdio_host *host, u8 event)
+{
+ if (event & GB_SDIO_CARD_INSERTED)
+ host->queued_events &= ~GB_SDIO_CARD_REMOVED;
+ else if (event & GB_SDIO_CARD_REMOVED)
+ host->queued_events &= ~GB_SDIO_CARD_INSERTED;
+
+ host->queued_events |= event;
+}
+
+static int _gb_sdio_process_events(struct gb_sdio_host *host, u8 event)
+{
+ u8 state_changed = 0;
+
+ if (event & GB_SDIO_CARD_INSERTED) {
+ if (host->mmc->caps & MMC_CAP_NONREMOVABLE)
+ return 0;
+ if (host->card_present)
+ return 0;
+ host->card_present = true;
+ state_changed = 1;
+ }
+
+ if (event & GB_SDIO_CARD_REMOVED) {
+ if (host->mmc->caps & MMC_CAP_NONREMOVABLE)
+ return 0;
+ if (!(host->card_present))
+ return 0;
+ host->card_present = false;
+ state_changed = 1;
+ }
+
+ if (event & GB_SDIO_WP) {
+ host->read_only = true;
+ }
+
+ if (state_changed) {
+ dev_info(mmc_dev(host->mmc), "card %s now event\n",
+ (host->card_present ? "inserted" : "removed"));
+ mmc_detect_change(host->mmc, 0);
+ }
+
+ return 0;
+}
+
+static int gb_sdio_request_handler(struct gb_operation *op)
+{
+ struct gb_sdio_host *host = gb_connection_get_data(op->connection);
+ struct gb_message *request;
+ struct gb_sdio_event_request *payload;
+ u8 type = op->type;
+ int ret = 0;
+ u8 event;
+
+ if (type != GB_SDIO_TYPE_EVENT) {
+ dev_err(mmc_dev(host->mmc),
+ "unsupported unsolicited event: %u\n", type);
+ return -EINVAL;
+ }
+
+ request = op->request;
+
+ if (request->payload_size < sizeof(*payload)) {
+ dev_err(mmc_dev(host->mmc), "wrong event size received (%zu < %zu)\n",
+ request->payload_size, sizeof(*payload));
+ return -EINVAL;
+ }
+
+ payload = request->payload;
+ event = payload->event;
+
+ if (host->removed)
+ _gb_queue_event(host, event);
+ else
+ ret = _gb_sdio_process_events(host, event);
+
+ return ret;
+}
+
+static int gb_sdio_set_ios(struct gb_sdio_host *host,
+ struct gb_sdio_set_ios_request *request)
+{
+ int ret;
+
+ ret = gbphy_runtime_get_sync(host->gbphy_dev);
+ if (ret)
+ return ret;
+
+ ret = gb_operation_sync(host->connection, GB_SDIO_TYPE_SET_IOS, request,
+ sizeof(*request), NULL, 0);
+
+ gbphy_runtime_put_autosuspend(host->gbphy_dev);
+
+ return ret;
+}
+
+static int _gb_sdio_send(struct gb_sdio_host *host, struct mmc_data *data,
+ size_t len, u16 nblocks, off_t skip)
+{
+ struct gb_sdio_transfer_request *request;
+ struct gb_sdio_transfer_response *response;
+ struct gb_operation *operation;
+ struct scatterlist *sg = data->sg;
+ unsigned int sg_len = data->sg_len;
+ size_t copied;
+ u16 send_blksz;
+ u16 send_blocks;
+ int ret;
+
+ WARN_ON(len > host->data_max);
+
+ operation = gb_operation_create(host->connection, GB_SDIO_TYPE_TRANSFER,
+ len + sizeof(*request),
+ sizeof(*response), GFP_KERNEL);
+ if (!operation)
+ return -ENOMEM;
+
+ request = operation->request->payload;
+ request->data_flags = (data->flags >> 8);
+ request->data_blocks = cpu_to_le16(nblocks);
+ request->data_blksz = cpu_to_le16(data->blksz);
+
+ copied = sg_pcopy_to_buffer(sg, sg_len, &request->data[0], len, skip);
+
+ if (copied != len) {
+ ret = -EINVAL;
+ goto err_put_operation;
+ }
+
+ ret = gb_operation_request_send_sync(operation);
+ if (ret < 0)
+ goto err_put_operation;
+
+ response = operation->response->payload;
+
+ send_blocks = le16_to_cpu(response->data_blocks);
+ send_blksz = le16_to_cpu(response->data_blksz);
+
+ if (len != send_blksz * send_blocks) {
+ dev_err(mmc_dev(host->mmc), "send: size received: %zu != %d\n",
+ len, send_blksz * send_blocks);
+ ret = -EINVAL;
+ }
+
+err_put_operation:
+ gb_operation_put(operation);
+
+ return ret;
+}
+
+static int _gb_sdio_recv(struct gb_sdio_host *host, struct mmc_data *data,
+ size_t len, u16 nblocks, off_t skip)
+{
+ struct gb_sdio_transfer_request *request;
+ struct gb_sdio_transfer_response *response;
+ struct gb_operation *operation;
+ struct scatterlist *sg = data->sg;
+ unsigned int sg_len = data->sg_len;
+ size_t copied;
+ u16 recv_blksz;
+ u16 recv_blocks;
+ int ret;
+
+ WARN_ON(len > host->data_max);
+
+ operation = gb_operation_create(host->connection, GB_SDIO_TYPE_TRANSFER,
+ sizeof(*request),
+ len + sizeof(*response), GFP_KERNEL);
+ if (!operation)
+ return -ENOMEM;
+
+ request = operation->request->payload;
+ request->data_flags = (data->flags >> 8);
+ request->data_blocks = cpu_to_le16(nblocks);
+ request->data_blksz = cpu_to_le16(data->blksz);
+
+ ret = gb_operation_request_send_sync(operation);
+ if (ret < 0)
+ goto err_put_operation;
+
+ response = operation->response->payload;
+ recv_blocks = le16_to_cpu(response->data_blocks);
+ recv_blksz = le16_to_cpu(response->data_blksz);
+
+ if (len != recv_blksz * recv_blocks) {
+ dev_err(mmc_dev(host->mmc), "recv: size received: %d != %zu\n",
+ recv_blksz * recv_blocks, len);
+ ret = -EINVAL;
+ goto err_put_operation;
+ }
+
+ copied = sg_pcopy_from_buffer(sg, sg_len, &response->data[0], len,
+ skip);
+ if (copied != len)
+ ret = -EINVAL;
+
+err_put_operation:
+ gb_operation_put(operation);
+
+ return ret;
+}
+
+static int gb_sdio_transfer(struct gb_sdio_host *host, struct mmc_data *data)
+{
+ size_t left, len;
+ off_t skip = 0;
+ int ret = 0;
+ u16 nblocks;
+
+ if (single_op(data->mrq->cmd) && data->blocks > 1) {
+ ret = -ETIMEDOUT;
+ goto out;
+ }
+
+ left = data->blksz * data->blocks;
+
+ while (left) {
+ /* check is a stop transmission is pending */
+ spin_lock(&host->xfer);
+ if (host->xfer_stop) {
+ host->xfer_stop = false;
+ spin_unlock(&host->xfer);
+ ret = -EINTR;
+ goto out;
+ }
+ spin_unlock(&host->xfer);
+ len = min(left, host->data_max);
+ nblocks = len / data->blksz;
+ len = nblocks * data->blksz;
+
+ if (data->flags & MMC_DATA_READ) {
+ ret = _gb_sdio_recv(host, data, len, nblocks, skip);
+ if (ret < 0)
+ goto out;
+ } else {
+ ret = _gb_sdio_send(host, data, len, nblocks, skip);
+ if (ret < 0)
+ goto out;
+ }
+ data->bytes_xfered += len;
+ left -= len;
+ skip += len;
+ }
+
+out:
+ data->error = ret;
+ return ret;
+}
+
+static int gb_sdio_command(struct gb_sdio_host *host, struct mmc_command *cmd)
+{
+ struct gb_sdio_command_request request = {0};
+ struct gb_sdio_command_response response;
+ struct mmc_data *data = host->mrq->data;
+ u8 cmd_flags;
+ u8 cmd_type;
+ int i;
+ int ret;
+
+ switch (mmc_resp_type(cmd)) {
+ case MMC_RSP_NONE:
+ cmd_flags = GB_SDIO_RSP_NONE;
+ break;
+ case MMC_RSP_R1:
+ cmd_flags = GB_SDIO_RSP_R1_R5_R6_R7;
+ break;
+ case MMC_RSP_R1B:
+ cmd_flags = GB_SDIO_RSP_R1B;
+ break;
+ case MMC_RSP_R2:
+ cmd_flags = GB_SDIO_RSP_R2;
+ break;
+ case MMC_RSP_R3:
+ cmd_flags = GB_SDIO_RSP_R3_R4;
+ break;
+ default:
+ dev_err(mmc_dev(host->mmc), "cmd flag invalid 0x%04x\n",
+ mmc_resp_type(cmd));
+ ret = -EINVAL;
+ goto out;
+ }
+
+ switch (mmc_cmd_type(cmd)) {
+ case MMC_CMD_BC:
+ cmd_type = GB_SDIO_CMD_BC;
+ break;
+ case MMC_CMD_BCR:
+ cmd_type = GB_SDIO_CMD_BCR;
+ break;
+ case MMC_CMD_AC:
+ cmd_type = GB_SDIO_CMD_AC;
+ break;
+ case MMC_CMD_ADTC:
+ cmd_type = GB_SDIO_CMD_ADTC;
+ break;
+ default:
+ dev_err(mmc_dev(host->mmc), "cmd type invalid 0x%04x\n",
+ mmc_cmd_type(cmd));
+ ret = -EINVAL;
+ goto out;
+ }
+
+ request.cmd = cmd->opcode;
+ request.cmd_flags = cmd_flags;
+ request.cmd_type = cmd_type;
+ request.cmd_arg = cpu_to_le32(cmd->arg);
+ /* some controllers need to know at command time data details */
+ if (data) {
+ request.data_blocks = cpu_to_le16(data->blocks);
+ request.data_blksz = cpu_to_le16(data->blksz);
+ }
+
+ ret = gb_operation_sync(host->connection, GB_SDIO_TYPE_COMMAND,
+ &request, sizeof(request), &response,
+ sizeof(response));
+ if (ret < 0)
+ goto out;
+
+ /* no response expected */
+ if (cmd_flags & GB_SDIO_RSP_NONE)
+ goto out;
+
+ /* long response expected */
+ if (cmd_flags & GB_SDIO_RSP_R2)
+ for (i = 0; i < 4; i++)
+ cmd->resp[i] = le32_to_cpu(response.resp[i]);
+ else
+ cmd->resp[0] = le32_to_cpu(response.resp[0]);
+
+out:
+ cmd->error = ret;
+ return ret;
+}
+
+static void gb_sdio_mrq_work(struct work_struct *work)
+{
+ struct gb_sdio_host *host;
+ struct mmc_request *mrq;
+ int ret;
+
+ host = container_of(work, struct gb_sdio_host, mrqwork);
+
+ ret = gbphy_runtime_get_sync(host->gbphy_dev);
+ if (ret)
+ return;
+
+ mutex_lock(&host->lock);
+ mrq = host->mrq;
+ if (!mrq) {
+ mutex_unlock(&host->lock);
+ gbphy_runtime_put_autosuspend(host->gbphy_dev);
+ dev_err(mmc_dev(host->mmc), "mmc request is NULL");
+ return;
+ }
+
+ if (host->removed) {
+ mrq->cmd->error = -ESHUTDOWN;
+ goto done;
+ }
+
+ if (mrq->sbc) {
+ ret = gb_sdio_command(host, mrq->sbc);
+ if (ret < 0)
+ goto done;
+ }
+
+ ret = gb_sdio_command(host, mrq->cmd);
+ if (ret < 0)
+ goto done;
+
+ if (mrq->data) {
+ ret = gb_sdio_transfer(host, mrq->data);
+ if (ret < 0)
+ goto done;
+ }
+
+ if (mrq->stop) {
+ ret = gb_sdio_command(host, mrq->stop);
+ if (ret < 0)
+ goto done;
+ }
+
+done:
+ host->mrq = NULL;
+ mutex_unlock(&host->lock);
+ mmc_request_done(host->mmc, mrq);
+ gbphy_runtime_put_autosuspend(host->gbphy_dev);
+}
+
+static void gb_mmc_request(struct mmc_host *mmc, struct mmc_request *mrq)
+{
+ struct gb_sdio_host *host = mmc_priv(mmc);
+ struct mmc_command *cmd = mrq->cmd;
+
+ /* Check if it is a cancel to ongoing transfer */
+ if (cmd->opcode == MMC_STOP_TRANSMISSION) {
+ spin_lock(&host->xfer);
+ host->xfer_stop = true;
+ spin_unlock(&host->xfer);
+ }
+
+ mutex_lock(&host->lock);
+
+ WARN_ON(host->mrq);
+ host->mrq = mrq;
+
+ if (host->removed) {
+ mrq->cmd->error = -ESHUTDOWN;
+ goto out;
+ }
+ if (!host->card_present) {
+ mrq->cmd->error = -ENOMEDIUM;
+ goto out;
+ }
+
+ queue_work(host->mrq_workqueue, &host->mrqwork);
+
+ mutex_unlock(&host->lock);
+ return;
+
+out:
+ host->mrq = NULL;
+ mutex_unlock(&host->lock);
+ mmc_request_done(mmc, mrq);
+}
+
+static void gb_mmc_set_ios(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ struct gb_sdio_host *host = mmc_priv(mmc);
+ struct gb_sdio_set_ios_request request;
+ int ret;
+ u8 power_mode;
+ u8 bus_width;
+ u8 timing;
+ u8 signal_voltage;
+ u8 drv_type;
+ u32 vdd = 0;
+
+ mutex_lock(&host->lock);
+ request.clock = cpu_to_le32(ios->clock);
+
+ if (ios->vdd)
+ vdd = 1 << (ios->vdd - GB_SDIO_VDD_SHIFT);
+ request.vdd = cpu_to_le32(vdd);
+
+ request.bus_mode = (ios->bus_mode == MMC_BUSMODE_OPENDRAIN ?
+ GB_SDIO_BUSMODE_OPENDRAIN :
+ GB_SDIO_BUSMODE_PUSHPULL);
+
+ switch (ios->power_mode) {
+ case MMC_POWER_OFF:
+ default:
+ power_mode = GB_SDIO_POWER_OFF;
+ break;
+ case MMC_POWER_UP:
+ power_mode = GB_SDIO_POWER_UP;
+ break;
+ case MMC_POWER_ON:
+ power_mode = GB_SDIO_POWER_ON;
+ break;
+ case MMC_POWER_UNDEFINED:
+ power_mode = GB_SDIO_POWER_UNDEFINED;
+ break;
+ }
+ request.power_mode = power_mode;
+
+ switch (ios->bus_width) {
+ case MMC_BUS_WIDTH_1:
+ bus_width = GB_SDIO_BUS_WIDTH_1;
+ break;
+ case MMC_BUS_WIDTH_4:
+ default:
+ bus_width = GB_SDIO_BUS_WIDTH_4;
+ break;
+ case MMC_BUS_WIDTH_8:
+ bus_width = GB_SDIO_BUS_WIDTH_8;
+ break;
+ }
+ request.bus_width = bus_width;
+
+ switch (ios->timing) {
+ case MMC_TIMING_LEGACY:
+ default:
+ timing = GB_SDIO_TIMING_LEGACY;
+ break;
+ case MMC_TIMING_MMC_HS:
+ timing = GB_SDIO_TIMING_MMC_HS;
+ break;
+ case MMC_TIMING_SD_HS:
+ timing = GB_SDIO_TIMING_SD_HS;
+ break;
+ case MMC_TIMING_UHS_SDR12:
+ timing = GB_SDIO_TIMING_UHS_SDR12;
+ break;
+ case MMC_TIMING_UHS_SDR25:
+ timing = GB_SDIO_TIMING_UHS_SDR25;
+ break;
+ case MMC_TIMING_UHS_SDR50:
+ timing = GB_SDIO_TIMING_UHS_SDR50;
+ break;
+ case MMC_TIMING_UHS_SDR104:
+ timing = GB_SDIO_TIMING_UHS_SDR104;
+ break;
+ case MMC_TIMING_UHS_DDR50:
+ timing = GB_SDIO_TIMING_UHS_DDR50;
+ break;
+ case MMC_TIMING_MMC_DDR52:
+ timing = GB_SDIO_TIMING_MMC_DDR52;
+ break;
+ case MMC_TIMING_MMC_HS200:
+ timing = GB_SDIO_TIMING_MMC_HS200;
+ break;
+ case MMC_TIMING_MMC_HS400:
+ timing = GB_SDIO_TIMING_MMC_HS400;
+ break;
+ }
+ request.timing = timing;
+
+ switch (ios->signal_voltage) {
+ case MMC_SIGNAL_VOLTAGE_330:
+ signal_voltage = GB_SDIO_SIGNAL_VOLTAGE_330;
+ break;
+ case MMC_SIGNAL_VOLTAGE_180:
+ default:
+ signal_voltage = GB_SDIO_SIGNAL_VOLTAGE_180;
+ break;
+ case MMC_SIGNAL_VOLTAGE_120:
+ signal_voltage = GB_SDIO_SIGNAL_VOLTAGE_120;
+ break;
+ }
+ request.signal_voltage = signal_voltage;
+
+ switch (ios->drv_type) {
+ case MMC_SET_DRIVER_TYPE_A:
+ drv_type = GB_SDIO_SET_DRIVER_TYPE_A;
+ break;
+ case MMC_SET_DRIVER_TYPE_C:
+ drv_type = GB_SDIO_SET_DRIVER_TYPE_C;
+ break;
+ case MMC_SET_DRIVER_TYPE_D:
+ drv_type = GB_SDIO_SET_DRIVER_TYPE_D;
+ break;
+ case MMC_SET_DRIVER_TYPE_B:
+ default:
+ drv_type = GB_SDIO_SET_DRIVER_TYPE_B;
+ break;
+ }
+ request.drv_type = drv_type;
+
+ ret = gb_sdio_set_ios(host, &request);
+ if (ret < 0)
+ goto out;
+
+ memcpy(&mmc->ios, ios, sizeof(mmc->ios));
+
+out:
+ mutex_unlock(&host->lock);
+}
+
+static int gb_mmc_get_ro(struct mmc_host *mmc)
+{
+ struct gb_sdio_host *host = mmc_priv(mmc);
+
+ mutex_lock(&host->lock);
+ if (host->removed) {
+ mutex_unlock(&host->lock);
+ return -ESHUTDOWN;
+ }
+ mutex_unlock(&host->lock);
+
+ return host->read_only;
+}
+
+static int gb_mmc_get_cd(struct mmc_host *mmc)
+{
+ struct gb_sdio_host *host = mmc_priv(mmc);
+
+ mutex_lock(&host->lock);
+ if (host->removed) {
+ mutex_unlock(&host->lock);
+ return -ESHUTDOWN;
+ }
+ mutex_unlock(&host->lock);
+
+ return host->card_present;
+}
+
+static int gb_mmc_switch_voltage(struct mmc_host *mmc, struct mmc_ios *ios)
+{
+ return 0;
+}
+
+static const struct mmc_host_ops gb_sdio_ops = {
+ .request = gb_mmc_request,
+ .set_ios = gb_mmc_set_ios,
+ .get_ro = gb_mmc_get_ro,
+ .get_cd = gb_mmc_get_cd,
+ .start_signal_voltage_switch = gb_mmc_switch_voltage,
+};
+
+static int gb_sdio_probe(struct gbphy_device *gbphy_dev,
+ const struct gbphy_device_id *id)
+{
+ struct gb_connection *connection;
+ struct mmc_host *mmc;
+ struct gb_sdio_host *host;
+ int ret = 0;
+
+ mmc = mmc_alloc_host(sizeof(*host), &gbphy_dev->dev);
+ if (!mmc)
+ return -ENOMEM;
+
+ connection = gb_connection_create(gbphy_dev->bundle,
+ le16_to_cpu(gbphy_dev->cport_desc->id),
+ gb_sdio_request_handler);
+ if (IS_ERR(connection)) {
+ ret = PTR_ERR(connection);
+ goto exit_mmc_free;
+ }
+
+ host = mmc_priv(mmc);
+ host->mmc = mmc;
+ host->removed = true;
+
+ host->connection = connection;
+ gb_connection_set_data(connection, host);
+ host->gbphy_dev = gbphy_dev;
+ gb_gbphy_set_data(gbphy_dev, host);
+
+ ret = gb_connection_enable_tx(connection);
+ if (ret)
+ goto exit_connection_destroy;
+
+ ret = gb_sdio_get_caps(host);
+ if (ret < 0)
+ goto exit_connection_disable;
+
+ mmc->ops = &gb_sdio_ops;
+
+ mmc->max_segs = host->mmc->max_blk_count;
+
+ /* for now we make a map 1:1 between max request and segment size */
+ mmc->max_req_size = mmc->max_blk_size * mmc->max_blk_count;
+ mmc->max_seg_size = mmc->max_req_size;
+
+ mutex_init(&host->lock);
+ spin_lock_init(&host->xfer);
+ host->mrq_workqueue = alloc_workqueue("mmc-%s", 0, 1,
+ dev_name(&gbphy_dev->dev));
+ if (!host->mrq_workqueue) {
+ ret = -ENOMEM;
+ goto exit_connection_disable;
+ }
+ INIT_WORK(&host->mrqwork, gb_sdio_mrq_work);
+
+ ret = gb_connection_enable(connection);
+ if (ret)
+ goto exit_wq_destroy;
+
+ ret = mmc_add_host(mmc);
+ if (ret < 0)
+ goto exit_wq_destroy;
+ host->removed = false;
+ ret = _gb_sdio_process_events(host, host->queued_events);
+ host->queued_events = 0;
+
+ gbphy_runtime_put_autosuspend(gbphy_dev);
+
+ return ret;
+
+exit_wq_destroy:
+ destroy_workqueue(host->mrq_workqueue);
+exit_connection_disable:
+ gb_connection_disable(connection);
+exit_connection_destroy:
+ gb_connection_destroy(connection);
+exit_mmc_free:
+ mmc_free_host(mmc);
+
+ return ret;
+}
+
+static void gb_sdio_remove(struct gbphy_device *gbphy_dev)
+{
+ struct gb_sdio_host *host = gb_gbphy_get_data(gbphy_dev);
+ struct gb_connection *connection = host->connection;
+ struct mmc_host *mmc;
+ int ret;
+
+ ret = gbphy_runtime_get_sync(gbphy_dev);
+ if (ret)
+ gbphy_runtime_get_noresume(gbphy_dev);
+
+ mutex_lock(&host->lock);
+ host->removed = true;
+ mmc = host->mmc;
+ gb_connection_set_data(connection, NULL);
+ mutex_unlock(&host->lock);
+
+ flush_workqueue(host->mrq_workqueue);
+ destroy_workqueue(host->mrq_workqueue);
+ gb_connection_disable_rx(connection);
+ mmc_remove_host(mmc);
+ gb_connection_disable(connection);
+ gb_connection_destroy(connection);
+ mmc_free_host(mmc);
+}
+
+static const struct gbphy_device_id gb_sdio_id_table[] = {
+ { GBPHY_PROTOCOL(GREYBUS_PROTOCOL_SDIO) },
+ { },
+};
+MODULE_DEVICE_TABLE(gbphy, gb_sdio_id_table);
+
+static struct gbphy_driver sdio_driver = {
+ .name = "sdio",
+ .probe = gb_sdio_probe,
+ .remove = gb_sdio_remove,
+ .id_table = gb_sdio_id_table,
+};
+
+module_gbphy_driver(sdio_driver);
+MODULE_LICENSE("GPL v2");
next prev parent reply other threads:[~2016-09-16 14:21 UTC|newest]
Thread overview: 84+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-09-14 10:09 [GIT PULL] Greybus driver subsystem for 4.9-rc1 Greg KH
2016-09-14 17:36 ` Mark Rutland
2016-09-14 17:36 ` Mark Rutland
2016-09-14 18:07 ` Greg KH
2016-09-14 18:07 ` Greg KH
2016-09-14 18:29 ` Greg KH
2016-09-14 18:29 ` Greg KH
2016-09-14 19:05 ` Joe Perches
2016-09-14 19:05 ` Joe Perches
2016-09-15 9:35 ` Bryan O'Donoghue
2016-09-15 9:35 ` Bryan O'Donoghue
2016-09-15 10:13 ` Mark Rutland
2016-09-15 10:13 ` Mark Rutland
2016-09-15 10:35 ` Bryan O'Donoghue
2016-09-15 10:35 ` Bryan O'Donoghue
2016-09-15 10:47 ` Bryan O'Donoghue
2016-09-15 10:47 ` Bryan O'Donoghue
2016-09-15 11:20 ` Mark Rutland
2016-09-15 11:20 ` Mark Rutland
2016-09-15 11:48 ` Bryan O'Donoghue
2016-09-15 11:48 ` Bryan O'Donoghue
2016-09-15 12:46 ` Mark Rutland
2016-09-15 12:46 ` Mark Rutland
2016-09-15 15:40 ` Bryan O'Donoghue
2016-09-15 15:40 ` Bryan O'Donoghue
2016-09-15 15:47 ` Mark Rutland
2016-09-15 15:47 ` Mark Rutland
2016-09-15 16:09 ` Bryan O'Donoghue
2016-09-15 16:09 ` Bryan O'Donoghue
2016-09-14 20:07 ` Rob Herring
2016-09-14 20:07 ` Rob Herring
2016-09-15 10:17 ` Greg KH
2016-09-15 10:17 ` Greg KH
2016-09-15 11:02 ` Bryan O'Donoghue
2016-09-15 11:02 ` Bryan O'Donoghue
[not found] ` <20160915122141.650632149@bubbles.kroah.org>
[not found] ` <20160915122234.640367870@bubbles.kroah.org>
2016-09-15 13:16 ` [patch 11/32] greybus: camera driver Laurent Pinchart
2016-09-15 14:45 ` [GIT PULL] Greybus driver subsystem for 4.9-rc1 Mark Brown
2016-09-16 6:05 ` Greg KH
2016-09-16 10:18 ` Mark Brown
2016-09-16 13:22 ` Greg KH
2016-09-16 14:24 ` Greg KH
2016-09-20 6:41 ` Greg KH
2016-09-20 7:12 ` Vaibhav Agarwal
2016-09-16 12:18 ` Arnd Bergmann
2016-09-21 13:02 ` Mark Rutland
2016-09-21 14:13 ` Greg KH
2016-09-16 6:40 ` [patch 00/32] Greybus driver subsystem Greg KH
2016-09-16 6:41 ` [patch 02/32] greybus: interface control logic Greg KH
2016-09-16 13:22 ` [patch 03/32] greybus: operations logic Greg KH
2016-09-16 13:23 ` [patch 04/32] greybus: host driver framework Greg KH
2016-09-16 13:23 ` [patch 05/32] greybus: trace.h Greg KH
2016-09-16 13:23 ` [patch 06/32] greybus: svc driver/watchdog Greg KH
2016-09-16 13:23 ` [patch 07/32] greybus: core code Greg KH
2016-09-16 13:24 ` [patch 08/32] greybus: bootrom driver Greg KH
2016-09-16 13:24 ` [patch 09/32] greybus: firmware download class driver Greg KH
2016-09-16 13:24 ` [patch 10/32] greybus: audio driver Greg KH
2016-09-16 13:25 ` [patch 11/32] greybus: camera driver Greg KH
2016-09-16 13:25 ` [patch 12/32] greybus: es2 host driver Greg KH
2016-10-07 13:43 ` Pavel Machek
2016-09-16 14:09 ` [patch 13/32] greybus: HID driver Greg KH
2016-09-16 14:10 ` [patch 14/32] greybus: LED driver Greg KH
2016-10-07 13:36 ` Pavel Machek
2016-10-07 13:41 ` Greg KH
2016-09-16 14:10 ` [patch 15/32] greybus: logging driver Greg KH
2016-09-16 14:10 ` [patch 16/32] greybus: loopback driver Greg KH
2016-09-16 14:10 ` [patch 17/32] greybus: power supply driver Greg KH
2016-10-07 13:49 ` Pavel Machek
2016-10-07 14:12 ` Greg KH
2016-10-07 18:15 ` Pavel Machek
2016-09-16 14:11 ` [patch 18/32] greybus: raw driver Greg KH
2016-09-16 14:11 ` [patch 19/32] greybus: timesync driver Greg KH
2016-09-16 14:11 ` [patch 20/32] greybus: vibrator driver Greg KH
2016-09-16 14:19 ` [patch 21/32] greybus: arche platform driver Greg KH
2016-09-16 14:20 ` [patch 22/32] greybus: bridged phy bus code Greg KH
2016-09-16 14:20 ` [patch 23/32] greybus: bridged phy gpio driver Greg KH
2016-09-16 14:20 ` [patch 24/32] greybus: bridged phy i2c driver Greg KH
2016-09-16 14:20 ` [patch 25/32] greybus: bridged phy pwm driver Greg KH
2016-09-16 14:21 ` Greg KH [this message]
2016-09-16 14:21 ` [patch 27/32] greybus: bridged phy spi driver Greg KH
2016-09-16 14:21 ` [patch 28/32] greybus: bridged phy uart driver Greg KH
2016-09-16 14:21 ` [patch 29/32] greybus: bridged phy usb driver Greg KH
2016-09-16 14:22 ` [patch 30/32] greybus: tools Greg KH
2016-09-16 14:22 ` [patch 31/32] greybus: documentation Greg KH
2016-09-16 14:22 ` [patch 32/32] greybus: add to the build Greg KH
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20160916142101.GF2040@kroah.com \
--to=gregkh@linuxfoundation.org \
--cc=arnd@arndb.de \
--cc=dtwlin@google.com \
--cc=elder@linaro.org \
--cc=johan@hovoldconsulting.com \
--cc=john.stultz@linaro.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mgreer@animalcreek.com \
--cc=mporter@kernel.crashing.org \
--cc=pure.logic@nexus-software.ie \
--cc=rmfrfs@gmail.com \
--cc=robh@kernel.org \
--cc=sspatil@google.com \
--cc=vaibhav.agarwal@linaro.org \
--cc=viresh.kumar@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.