From: khilman@baylibre.com (Kevin Hilman)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH 4/6] ARM: dts: davinci: da850-lcdk: enable VPIF capture
Date: Tue, 25 Oct 2016 16:55:34 -0700 [thread overview]
Message-ID: <20161025235536.7342-5-khilman@baylibre.com> (raw)
In-Reply-To: <20161025235536.7342-1-khilman@baylibre.com>
Enable video capture via the on-board TVP5147 decoder hooked up to ch0
one of the VPIF capture input.
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
---
arch/arm/boot/dts/da850-lcdk.dts | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
index 7b8ab21fed6c..ef3c2aa1b619 100644
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -138,6 +138,24 @@
reg = <0x18>;
status = "okay";
};
+
+ tvp5147 at 5d {
+ compatible = "ti,tvp5147";
+ reg = <0x5d>;
+ status = "okay";
+
+ port {
+ composite: endpoint {
+ hsync-active = <1>;
+ vsync-active = <1>;
+ pclk-sample = <0>;
+
+ /* VPIF channel 0 (lower 8-bits) */
+ remote-endpoint = <&vpif_ch0>;
+ bus-width = <8>;
+ };
+ };
+ };
};
&mcasp0 {
@@ -219,3 +237,15 @@
};
};
};
+
+&vpif {
+ status = "okay";
+};
+
+&vpif_capture {
+ status = "okay";
+};
+
+&vpif_ch0 {
+ remote-endpoint = <&composite>;
+};
--
2.9.3
WARNING: multiple messages have this Message-ID (diff)
From: Kevin Hilman <khilman@baylibre.com>
To: Hans Verkuil <hverkuil@xs4all.nl>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
linux-media@vger.kernel.org
Cc: "Sekhar Nori" <nsekhar@ti.com>,
"Axel Haslam" <ahaslam@baylibre.com>,
"Bartosz Gołaszewski" <bgolaszewski@baylibre.com>,
"Alexandre Bailon" <abailon@baylibre.com>,
"David Lechner" <david@lechnology.com>,
linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH 4/6] ARM: dts: davinci: da850-lcdk: enable VPIF capture
Date: Tue, 25 Oct 2016 16:55:34 -0700 [thread overview]
Message-ID: <20161025235536.7342-5-khilman@baylibre.com> (raw)
In-Reply-To: <20161025235536.7342-1-khilman@baylibre.com>
Enable video capture via the on-board TVP5147 decoder hooked up to ch0
one of the VPIF capture input.
Signed-off-by: Kevin Hilman <khilman@baylibre.com>
---
arch/arm/boot/dts/da850-lcdk.dts | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/arch/arm/boot/dts/da850-lcdk.dts b/arch/arm/boot/dts/da850-lcdk.dts
index 7b8ab21fed6c..ef3c2aa1b619 100644
--- a/arch/arm/boot/dts/da850-lcdk.dts
+++ b/arch/arm/boot/dts/da850-lcdk.dts
@@ -138,6 +138,24 @@
reg = <0x18>;
status = "okay";
};
+
+ tvp5147@5d {
+ compatible = "ti,tvp5147";
+ reg = <0x5d>;
+ status = "okay";
+
+ port {
+ composite: endpoint {
+ hsync-active = <1>;
+ vsync-active = <1>;
+ pclk-sample = <0>;
+
+ /* VPIF channel 0 (lower 8-bits) */
+ remote-endpoint = <&vpif_ch0>;
+ bus-width = <8>;
+ };
+ };
+ };
};
&mcasp0 {
@@ -219,3 +237,15 @@
};
};
};
+
+&vpif {
+ status = "okay";
+};
+
+&vpif_capture {
+ status = "okay";
+};
+
+&vpif_ch0 {
+ remote-endpoint = <&composite>;
+};
--
2.9.3
next prev parent reply other threads:[~2016-10-25 23:55 UTC|newest]
Thread overview: 26+ messages / expand[flat|nested] mbox.gz Atom feed top
2016-10-25 23:55 [RFC PATCH 0/6] media: davinci: VPIF: add DT support Kevin Hilman
2016-10-25 23:55 ` Kevin Hilman
2016-10-25 23:55 ` [RFC PATCH 1/6] [media] davinci: add support for DT init Kevin Hilman
2016-10-25 23:55 ` Kevin Hilman
2016-10-25 23:55 ` [RFC PATCH 2/6] ARM: davinci: da8xx: VPIF: enable " Kevin Hilman
2016-10-25 23:55 ` Kevin Hilman
2016-10-25 23:55 ` [RFC PATCH 3/6] ARM: dts: davinci: da850: add VPIF Kevin Hilman
2016-10-25 23:55 ` Kevin Hilman
2016-10-25 23:55 ` Kevin Hilman [this message]
2016-10-25 23:55 ` [RFC PATCH 4/6] ARM: dts: davinci: da850-lcdk: enable VPIF capture Kevin Hilman
2016-10-25 23:55 ` [RFC PATCH 5/6] [media] davinci: vpif_capture: don't lock over s_stream Kevin Hilman
2016-10-25 23:55 ` Kevin Hilman
2016-10-25 23:55 ` [RFC PATCH 6/6] [media] davinci: vpif_capture: get subdevs from DT Kevin Hilman
2016-10-25 23:55 ` Kevin Hilman
2016-11-11 15:36 ` Hans Verkuil
2016-11-11 15:36 ` Hans Verkuil
2016-11-11 15:50 ` Javier Martinez Canillas
2016-11-11 15:50 ` Javier Martinez Canillas
2016-11-11 15:53 ` Javier Martinez Canillas
2016-11-11 15:53 ` Javier Martinez Canillas
2016-10-28 17:17 ` [RFC PATCH 0/6] media: davinci: VPIF: add DT support Kevin Hilman
2016-10-28 17:17 ` Kevin Hilman
2016-11-11 15:36 ` Hans Verkuil
2016-11-11 15:36 ` Hans Verkuil
2016-11-11 17:55 ` Kevin Hilman
2016-11-11 17:55 ` Kevin Hilman
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20161025235536.7342-5-khilman@baylibre.com \
--to=khilman@baylibre.com \
--cc=linux-arm-kernel@lists.infradead.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.