All of lore.kernel.org
 help / color / mirror / Atom feed
From: khilman@baylibre.com (Kevin Hilman)
To: linux-arm-kernel@lists.infradead.org
Subject: [RFC PATCH 0/6] media: davinci: VPIF: add DT support
Date: Fri, 28 Oct 2016 10:17:41 -0700	[thread overview]
Message-ID: <m2k2cs75qi.fsf@baylibre.com> (raw)
In-Reply-To: <20161025235536.7342-1-khilman@baylibre.com> (Kevin Hilman's message of "Tue, 25 Oct 2016 16:55:30 -0700")

Kevin Hilman <khilman@baylibre.com> writes:

> This series attempts to add DT support to the davinci VPIF capture
> driver.
>
> I'm not sure I've completely grasped the proper use of the ports and
> endpoints stuff, so this RFC is primarily to get input on whether I'm
> on the right track.
>
> The last patch is the one where all my questions are, the rest are
> just prep work to ge there.
>
> Tested on da850-lcdk and was able to do basic frame capture from the
> composite input.
>
> Series applies on v4.9-rc1

And FYI for anyone wanting to test, it needs a few config options
enabled[1] that are not (yet) part of davinci_all_defconfig.  I'll
update the defconfig when I'm ready to send non-RFC patches.

Kevin

[1]
CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_VIDEO_DEV=y

CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y

CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_VIDEO_DAVINCI_VPIF_CAPTURE=y

# manually select codecs
CONFIG_MEDIA_SUBDRV_AUTOSELECT=n

# da850-lcdk
CONFIG_VIDEO_TVP514X=y
CONFIG_VIDEO_ADV7343=y

WARNING: multiple messages have this Message-ID (diff)
From: Kevin Hilman <khilman@baylibre.com>
To: Hans Verkuil <hverkuil@xs4all.nl>
Cc: "Laurent Pinchart" <laurent.pinchart@ideasonboard.com>,
	linux-media@vger.kernel.org, "Sekhar Nori" <nsekhar@ti.com>,
	"Axel Haslam" <ahaslam@baylibre.com>,
	"Bartosz Gołaszewski" <bgolaszewski@baylibre.com>,
	"Alexandre Bailon" <abailon@baylibre.com>,
	"David Lechner" <david@lechnology.com>,
	linux-arm-kernel@lists.infradead.org
Subject: Re: [RFC PATCH 0/6] media: davinci: VPIF: add DT support
Date: Fri, 28 Oct 2016 10:17:41 -0700	[thread overview]
Message-ID: <m2k2cs75qi.fsf@baylibre.com> (raw)
In-Reply-To: <20161025235536.7342-1-khilman@baylibre.com> (Kevin Hilman's message of "Tue, 25 Oct 2016 16:55:30 -0700")

Kevin Hilman <khilman@baylibre.com> writes:

> This series attempts to add DT support to the davinci VPIF capture
> driver.
>
> I'm not sure I've completely grasped the proper use of the ports and
> endpoints stuff, so this RFC is primarily to get input on whether I'm
> on the right track.
>
> The last patch is the one where all my questions are, the rest are
> just prep work to ge there.
>
> Tested on da850-lcdk and was able to do basic frame capture from the
> composite input.
>
> Series applies on v4.9-rc1

And FYI for anyone wanting to test, it needs a few config options
enabled[1] that are not (yet) part of davinci_all_defconfig.  I'll
update the defconfig when I'm ready to send non-RFC patches.

Kevin

[1]
CONFIG_MEDIA_SUPPORT=y
CONFIG_MEDIA_CAMERA_SUPPORT=y
CONFIG_VIDEO_DEV=y

CONFIG_VIDEO_V4L2=y
CONFIG_VIDEO_V4L2_SUBDEV_API=y

CONFIG_V4L_PLATFORM_DRIVERS=y
CONFIG_VIDEO_DAVINCI_VPIF_CAPTURE=y

# manually select codecs
CONFIG_MEDIA_SUBDRV_AUTOSELECT=n

# da850-lcdk
CONFIG_VIDEO_TVP514X=y
CONFIG_VIDEO_ADV7343=y

  parent reply	other threads:[~2016-10-28 17:17 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2016-10-25 23:55 [RFC PATCH 0/6] media: davinci: VPIF: add DT support Kevin Hilman
2016-10-25 23:55 ` Kevin Hilman
2016-10-25 23:55 ` [RFC PATCH 1/6] [media] davinci: add support for DT init Kevin Hilman
2016-10-25 23:55   ` Kevin Hilman
2016-10-25 23:55 ` [RFC PATCH 2/6] ARM: davinci: da8xx: VPIF: enable " Kevin Hilman
2016-10-25 23:55   ` Kevin Hilman
2016-10-25 23:55 ` [RFC PATCH 3/6] ARM: dts: davinci: da850: add VPIF Kevin Hilman
2016-10-25 23:55   ` Kevin Hilman
2016-10-25 23:55 ` [RFC PATCH 4/6] ARM: dts: davinci: da850-lcdk: enable VPIF capture Kevin Hilman
2016-10-25 23:55   ` Kevin Hilman
2016-10-25 23:55 ` [RFC PATCH 5/6] [media] davinci: vpif_capture: don't lock over s_stream Kevin Hilman
2016-10-25 23:55   ` Kevin Hilman
2016-10-25 23:55 ` [RFC PATCH 6/6] [media] davinci: vpif_capture: get subdevs from DT Kevin Hilman
2016-10-25 23:55   ` Kevin Hilman
2016-11-11 15:36   ` Hans Verkuil
2016-11-11 15:36     ` Hans Verkuil
2016-11-11 15:50     ` Javier Martinez Canillas
2016-11-11 15:50       ` Javier Martinez Canillas
2016-11-11 15:53       ` Javier Martinez Canillas
2016-11-11 15:53         ` Javier Martinez Canillas
2016-10-28 17:17 ` Kevin Hilman [this message]
2016-10-28 17:17   ` [RFC PATCH 0/6] media: davinci: VPIF: add DT support Kevin Hilman
2016-11-11 15:36 ` Hans Verkuil
2016-11-11 15:36   ` Hans Verkuil
2016-11-11 17:55   ` Kevin Hilman
2016-11-11 17:55     ` Kevin Hilman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=m2k2cs75qi.fsf@baylibre.com \
    --to=khilman@baylibre.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.