All of lore.kernel.org
 help / color / mirror / Atom feed
From: f.fainelli@gmail.com (Florian Fainelli)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH net-next v2 00/10] net: dsa: Support for pdata in dsa2
Date: Wed, 11 Jan 2017 19:41:11 -0800	[thread overview]
Message-ID: <20170112034121.27697-1-f.fainelli@gmail.com> (raw)

Hi all,

This is not exactly new, and was sent before, although back then, I did not
have an user of the pre-declared MDIO board information, but now we do. Note
that I have additional changes queued up to have b53 register platform data for
MIPS bcm47xx and bcm63xx.

Yes I know that we should have the Orion platforms eventually be converted to
Device Tree, but until that happens, I don't want any remaining users of the
old "dsa" platform device (hence the previous DTS submissions for ARM/mvebu)
and, there will be platforms out there that most likely won't never see DT
coming their way (BCM47xx is almost 100% sure, BCM63xx maybe not in a distant
future).

We would probably want the whole series to be merged via David Miller's tree
to simplify things.

Greg, can you Ack/Nack patch 5 since it touched the core LDD?

Thanks!

Changes in v2:

- Rebased against latest net-next/master

- Moved dev_find_class() to device_find_class() into drivers/base/core.c

- Moved dev_to_net_device into net/core/dev.c

- Utilize dsa_chip_data directly instead of dsa_platform_data

- Augmented dsa_chip_data to be multi-CPU port ready

Changes from last submission (few months back):

- rebased against latest net-next

- do not introduce dsa2_platform_data which was overkill and was meant to
  allow us to do exaclty the same things with platform data and Device Tree
  we use the existing dsa_platform_data instead

- properly register MDIO devices when the MDIO bus is registered and associate
  platform_data with them

- add a change to the Orion platform code to demonstrate how this can be used

Thank you

Florian Fainelli (10):
  net: dsa: Pass device pointer to dsa_register_switch
  net: dsa: Make most functions take a dsa_port argument
  net: dsa: Suffix function manipulating device_node with _dn
  net: dsa: Move ports assignment closer to error checking
  drivers: base: Add device_find_class()
  net: dsa: Migrate to device_find_class()
  net: Relocate dev_to_net_device() into core
  net: dsa: Add support for platform data
  net: phy: Allow pre-declaration of MDIO devices
  ARM: orion: Register DSA switch as a MDIO device

 arch/arm/mach-orion5x/common.c               |   2 +-
 arch/arm/mach-orion5x/common.h               |   4 +-
 arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c |   7 +-
 arch/arm/mach-orion5x/rd88f5181l-ge-setup.c  |   7 +-
 arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c |   7 +-
 arch/arm/mach-orion5x/wnr854t-setup.c        |   2 +-
 arch/arm/mach-orion5x/wrt350n-v2-setup.c     |   7 +-
 arch/arm/plat-orion/common.c                 |  25 +++-
 arch/arm/plat-orion/include/plat/common.h    |   4 +-
 drivers/base/core.c                          |  19 +++
 drivers/net/dsa/b53/b53_common.c             |   2 +-
 drivers/net/dsa/mv88e6xxx/chip.c             |  11 +-
 drivers/net/dsa/qca8k.c                      |   2 +-
 drivers/net/phy/Makefile                     |   3 +-
 drivers/net/phy/mdio-boardinfo.c             |  86 ++++++++++++++
 drivers/net/phy/mdio-boardinfo.h             |  19 +++
 drivers/net/phy/mdio_bus.c                   |   5 +
 drivers/net/phy/mdio_device.c                |  11 ++
 include/linux/device.h                       |   1 +
 include/linux/mdio.h                         |   3 +
 include/linux/mod_devicetable.h              |   1 +
 include/linux/netdevice.h                    |   2 +
 include/linux/phy.h                          |  19 +++
 include/net/dsa.h                            |   8 +-
 net/core/dev.c                               |  19 +++
 net/dsa/dsa.c                                |  53 ++-------
 net/dsa/dsa2.c                               | 168 +++++++++++++++++++--------
 net/dsa/dsa_priv.h                           |   4 +-
 28 files changed, 360 insertions(+), 141 deletions(-)
 create mode 100644 drivers/net/phy/mdio-boardinfo.c
 create mode 100644 drivers/net/phy/mdio-boardinfo.h

-- 
2.9.3

WARNING: multiple messages have this Message-ID (diff)
From: Florian Fainelli <f.fainelli@gmail.com>
To: netdev@vger.kernel.org
Cc: Florian Fainelli <f.fainelli@gmail.com>,
	Jason Cooper <jason@lakedaemon.net>, Andrew Lunn <andrew@lunn.ch>,
	Sebastian Hesselbarth <sebastian.hesselbarth@gmail.com>,
	Gregory Clement <gregory.clement@free-electrons.com>,
	Russell King <linux@armlinux.org.uk>,
	Vivien Didelot <vivien.didelot@savoirfairelinux.com>,
	"David S. Miller" <davem@davemloft.net>,
	linux-arm-kernel@lists.infradead.org (moderated list:ARM
	SUB-ARCHITECTURES), linux-kernel@vger.kernel.org (open list),
	gregkh@linuxfoundation.org
Subject: [PATCH net-next v2 00/10] net: dsa: Support for pdata in dsa2
Date: Wed, 11 Jan 2017 19:41:11 -0800	[thread overview]
Message-ID: <20170112034121.27697-1-f.fainelli@gmail.com> (raw)

Hi all,

This is not exactly new, and was sent before, although back then, I did not
have an user of the pre-declared MDIO board information, but now we do. Note
that I have additional changes queued up to have b53 register platform data for
MIPS bcm47xx and bcm63xx.

Yes I know that we should have the Orion platforms eventually be converted to
Device Tree, but until that happens, I don't want any remaining users of the
old "dsa" platform device (hence the previous DTS submissions for ARM/mvebu)
and, there will be platforms out there that most likely won't never see DT
coming their way (BCM47xx is almost 100% sure, BCM63xx maybe not in a distant
future).

We would probably want the whole series to be merged via David Miller's tree
to simplify things.

Greg, can you Ack/Nack patch 5 since it touched the core LDD?

Thanks!

Changes in v2:

- Rebased against latest net-next/master

- Moved dev_find_class() to device_find_class() into drivers/base/core.c

- Moved dev_to_net_device into net/core/dev.c

- Utilize dsa_chip_data directly instead of dsa_platform_data

- Augmented dsa_chip_data to be multi-CPU port ready

Changes from last submission (few months back):

- rebased against latest net-next

- do not introduce dsa2_platform_data which was overkill and was meant to
  allow us to do exaclty the same things with platform data and Device Tree
  we use the existing dsa_platform_data instead

- properly register MDIO devices when the MDIO bus is registered and associate
  platform_data with them

- add a change to the Orion platform code to demonstrate how this can be used

Thank you

Florian Fainelli (10):
  net: dsa: Pass device pointer to dsa_register_switch
  net: dsa: Make most functions take a dsa_port argument
  net: dsa: Suffix function manipulating device_node with _dn
  net: dsa: Move ports assignment closer to error checking
  drivers: base: Add device_find_class()
  net: dsa: Migrate to device_find_class()
  net: Relocate dev_to_net_device() into core
  net: dsa: Add support for platform data
  net: phy: Allow pre-declaration of MDIO devices
  ARM: orion: Register DSA switch as a MDIO device

 arch/arm/mach-orion5x/common.c               |   2 +-
 arch/arm/mach-orion5x/common.h               |   4 +-
 arch/arm/mach-orion5x/rd88f5181l-fxo-setup.c |   7 +-
 arch/arm/mach-orion5x/rd88f5181l-ge-setup.c  |   7 +-
 arch/arm/mach-orion5x/rd88f6183ap-ge-setup.c |   7 +-
 arch/arm/mach-orion5x/wnr854t-setup.c        |   2 +-
 arch/arm/mach-orion5x/wrt350n-v2-setup.c     |   7 +-
 arch/arm/plat-orion/common.c                 |  25 +++-
 arch/arm/plat-orion/include/plat/common.h    |   4 +-
 drivers/base/core.c                          |  19 +++
 drivers/net/dsa/b53/b53_common.c             |   2 +-
 drivers/net/dsa/mv88e6xxx/chip.c             |  11 +-
 drivers/net/dsa/qca8k.c                      |   2 +-
 drivers/net/phy/Makefile                     |   3 +-
 drivers/net/phy/mdio-boardinfo.c             |  86 ++++++++++++++
 drivers/net/phy/mdio-boardinfo.h             |  19 +++
 drivers/net/phy/mdio_bus.c                   |   5 +
 drivers/net/phy/mdio_device.c                |  11 ++
 include/linux/device.h                       |   1 +
 include/linux/mdio.h                         |   3 +
 include/linux/mod_devicetable.h              |   1 +
 include/linux/netdevice.h                    |   2 +
 include/linux/phy.h                          |  19 +++
 include/net/dsa.h                            |   8 +-
 net/core/dev.c                               |  19 +++
 net/dsa/dsa.c                                |  53 ++-------
 net/dsa/dsa2.c                               | 168 +++++++++++++++++++--------
 net/dsa/dsa_priv.h                           |   4 +-
 28 files changed, 360 insertions(+), 141 deletions(-)
 create mode 100644 drivers/net/phy/mdio-boardinfo.c
 create mode 100644 drivers/net/phy/mdio-boardinfo.h

-- 
2.9.3

             reply	other threads:[~2017-01-12  3:41 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-01-12  3:41 Florian Fainelli [this message]
2017-01-12  3:41 ` [PATCH net-next v2 00/10] net: dsa: Support for pdata in dsa2 Florian Fainelli
2017-01-12  3:41 ` [PATCH net-next v2 01/10] net: dsa: Pass device pointer to dsa_register_switch Florian Fainelli
2017-01-12  3:41   ` Florian Fainelli
2017-01-12  3:41 ` [PATCH net-next v2 02/10] net: dsa: Make most functions take a dsa_port argument Florian Fainelli
2017-01-12  3:41   ` Florian Fainelli
2017-01-12  3:41 ` [PATCH net-next v2 03/10] net: dsa: Suffix function manipulating device_node with _dn Florian Fainelli
2017-01-12  3:41   ` Florian Fainelli
2017-01-12  3:41   ` Florian Fainelli
2017-01-12  3:41 ` [PATCH net-next v2 04/10] net: dsa: Move ports assignment closer to error checking Florian Fainelli
2017-01-12  3:41   ` Florian Fainelli
2017-01-12  3:41   ` Florian Fainelli
2017-01-12  3:41 ` [PATCH net-next v2 05/10] drivers: base: Add device_find_class() Florian Fainelli
2017-01-12  3:41   ` Florian Fainelli
2017-01-12  3:41   ` Florian Fainelli
2017-01-12 21:21   ` David Miller
2017-01-12 21:21     ` David Miller
2017-01-12 22:50     ` Florian Fainelli
2017-01-12 22:50       ` Florian Fainelli
2017-01-13  4:16       ` David Miller
2017-01-13  4:16         ` David Miller
2017-01-13 10:55       ` David Laight
2017-01-13 10:55         ` David Laight
2017-01-14 19:01         ` Florian Fainelli
2017-01-14 19:01           ` Florian Fainelli
2017-01-12  3:41 ` [PATCH net-next v2 06/10] net: dsa: Migrate to device_find_class() Florian Fainelli
2017-01-12  3:41   ` Florian Fainelli
2017-01-12  3:41 ` [PATCH net-next v2 07/10] net: Relocate dev_to_net_device() into core Florian Fainelli
2017-01-12  3:41   ` Florian Fainelli
2017-01-12  3:41   ` Florian Fainelli
2017-01-12  3:41 ` [PATCH net-next v2 08/10] net: dsa: Add support for platform data Florian Fainelli
2017-01-12  3:41   ` Florian Fainelli
2017-01-13 14:04   ` Andrew Lunn
2017-01-13 14:04     ` Andrew Lunn
2017-01-13 22:37     ` Florian Fainelli
2017-01-13 22:37       ` Florian Fainelli
2017-01-14 19:12       ` Florian Fainelli
2017-01-14 19:12         ` Florian Fainelli
2017-01-13 14:11   ` Andrew Lunn
2017-01-13 14:11     ` Andrew Lunn
2017-01-13 22:39     ` Florian Fainelli
2017-01-13 22:39       ` Florian Fainelli
2017-01-12  3:41 ` [PATCH net-next v2 09/10] net: phy: Allow pre-declaration of MDIO devices Florian Fainelli
2017-01-12  3:41   ` Florian Fainelli
2017-01-12  3:41 ` [PATCH net-next v2 10/10] ARM: orion: Register DSA switch as a MDIO device Florian Fainelli
2017-01-12  3:41   ` Florian Fainelli
2017-01-13  2:34 ` [PATCH net-next v2 00/10] net: dsa: Support for pdata in dsa2 Vivien Didelot
2017-01-13  2:34   ` Vivien Didelot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20170112034121.27697-1-f.fainelli@gmail.com \
    --to=f.fainelli@gmail.com \
    --cc=linux-arm-kernel@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.