Re: [PATCHv2] dt: bindings: Add support for CSI1 bus

[Pavel Machek <pavel-+ZI9xUNit7I@public.gmane.org>]

[-- Attachment #1: Type: text/plain, Size: 2481 bytes --]

Hi!

> > --- a/Documentation/devicetree/bindings/media/video-interfaces.txt
> > +++ b/Documentation/devicetree/bindings/media/video-interfaces.txt
> > @@ -76,6 +76,11 @@ Optional endpoint properties
> >    mode horizontal and vertical synchronization signals are provided to the
> >    slave device (data source) by the master device (data sink). In the master
> >    mode the data source device is also the source of the synchronization signals.
> > +- bus-type: data bus type. Possible values are:
> > +  0 - MIPI CSI2
> > +  1 - parallel / Bt656
> > +  2 - MIPI CSI1
> > +  3 - CCP2
> 
> Actually, thinking about this again --- we only need to explictly specify
> busses if we're dealing with either CCP2 or CSI-1. The vast majority of the
> actual busses are and continue to be CSI-2 or either parallel or Bt.656. As
> they can be implicitly detected, we would have an option to just drop values
> 0 and 1 from above, i.e. only leave CSI-1 and CCP2. For now, specifying
> CSI-2 or parallel / Bt.656 adds no value as the old DT binaries without
> bus-type will need to be supported anyway.

Hmm. "Just deleting the others" may be a bit confusing... but what
about this? It explains what we can autodetect.

Best regards,
								Pavel

diff --git a/Documentation/devicetree/bindings/media/video-interfaces.txt b/Documentation/devicetree/bindings/media/video-interfaces.txt
index 08c4498..d54093b 100644
--- a/Documentation/devicetree/bindings/media/video-interfaces.txt
+++ b/Documentation/devicetree/bindings/media/video-interfaces.txt
@@ -77,10 +77,10 @@ Optional endpoint properties
   slave device (data source) by the master device (data sink). In the master
   mode the data source device is also the source of the synchronization signals.
 - bus-type: data bus type. Possible values are:
-  0 - MIPI CSI2
-  1 - parallel / Bt656
-  2 - MIPI CSI1
-  3 - CCP2
+  0 - autodetect based on other properties (MIPI CSI2, parallel, Bt656)
+  1 - MIPI CSI1
+  2 - CCP2
+  Autodetection is default, and bus-type property may be omitted in that case.
 - bus-width: number of data lines actively used, valid for the parallel busses.
 - data-shift: on the parallel data busses, if bus-width is used to specify the
   number of data lines, data-shift can be used to specify which data lines are


-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]