Re: [PATCHv2] dt: bindings: Add support for CSI1 bus

[Pavel Machek <pavel-+ZI9xUNit7I@public.gmane.org>]

[-- Attachment #1: Type: text/plain, Size: 1180 bytes --]

Hi!

> >  - bus-type: data bus type. Possible values are:
> > -  0 - MIPI CSI2
> > -  1 - parallel / Bt656
> > -  2 - MIPI CSI1
> > -  3 - CCP2
> > +  0 - autodetect based on other properties (MIPI CSI2, parallel, Bt656)
> 
> In the meantime, I also realised that we need to separate MIPI C-PHY and
> D-PHY from each other. So I think we'll need that property for CSI-2
> nevertheless. How about:
> 
> 0 - autodetect based on other properties (MIPI CSI-2 D-PHY, parallel or Bt656)
> 1 - MIPI CSI-2 C-PHY
> 2 - MIPI CSI1
> 3 - CCP2 
> 
> I wouldn't add a separate entry for the parallel case as there are plenty of
> existing DT binaries with parallel interface configuration without phy-type
> property. They will need to be continue to be supported anyway, so there's
> not too much value in adding a type for that purpose.
> 
> I do find this a bit annoying; we should have had something like phy-type
> from day one rather than try to guess which phy is being used...

Ok, v3 is in the mail. 

									Pavel
-- 
(english) http://www.livejournal.com/~pavelmachek
(cesky, pictures) http://atrey.karlin.mff.cuni.cz/~pavel/picture/horses/blog.html

[-- Attachment #2: Digital signature --]
[-- Type: application/pgp-signature, Size: 181 bytes --]