From: Niklas Cassel <niklas.cassel@axis.com>
To: Kishon Vijay Abraham I <kishon@ti.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Bjorn Helgaas <bhelgaas@google.com>,
Niklas Cassel <niklass@axis.com>,
Jesper Nilsson <jespern@axis.com>,
Jingoo Han <jingoohan1@gmail.com>,
Joao Pinto <Joao.Pinto@synopsys.com>
Cc: linux-omap@vger.kernel.org, linux-pci@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-arm-kernel@axis.com
Subject: [PATCH v6 15/18] PCI: dwc: Make cpu_addr_fixup take struct dw_pcie as argument
Date: Wed, 20 Dec 2017 00:29:36 +0100 [thread overview]
Message-ID: <20171219232940.659-16-niklas.cassel@axis.com> (raw)
In-Reply-To: <20171219232940.659-1-niklas.cassel@axis.com>
The current cpu addr fixup mask for ARTPEC-6, GENMASK(27, 0), is wrong.
The correct cpu addr fixup mask for ARTPEC-6 is GENMASK(28, 0).
However, having a hardcoded cpu addr fixup mask in each driver is
arguably wrong.
A device tree property called something like "cpu-addr-fixup-mask"
would have been a better solution.
Introducing such a property is not needed though, since we already have
pp->cfg0_base and ep->phys_base, which is derived from already existing
device tree properties.
It is also worth noting that for ARTPEC-7, hardcoding the cpu addr fixup
mask is not possible, since it uses a High Address Bits Look Up Table,
which means that it can, at runtime, map the PCIe window to an arbitrary
address in the 32-bit address space.
By using pp->cfg0_base and ep->phys_base, we avoid hardcoding a mask
in each driver. This should work for ARTPEC-6, DRA7xx, and ARTPEC-7.
I have not changed the code in DRA7xx though, since their existing
code works, but if they want, they could use the same logic as
artpec6_pcie_cpu_addr_fixup, and thus remove their hardcoded mask.
The reason why the fixup mask is needed is explained in commit f4c55c5a3f7f
("PCI: designware: Program ATU with untranslated address").
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
---
drivers/pci/dwc/pci-dra7xx.c | 2 +-
drivers/pci/dwc/pcie-artpec6.c | 18 ++++++++++++++----
drivers/pci/dwc/pcie-designware.c | 2 +-
drivers/pci/dwc/pcie-designware.h | 2 +-
4 files changed, 17 insertions(+), 7 deletions(-)
diff --git a/drivers/pci/dwc/pci-dra7xx.c b/drivers/pci/dwc/pci-dra7xx.c
index 224ff8affdce..89d87844abb3 100644
--- a/drivers/pci/dwc/pci-dra7xx.c
+++ b/drivers/pci/dwc/pci-dra7xx.c
@@ -110,7 +110,7 @@ static inline void dra7xx_pcie_writel(struct dra7xx_pcie *pcie, u32 offset,
writel(value, pcie->base + offset);
}
-static u64 dra7xx_pcie_cpu_addr_fixup(u64 pci_addr)
+static u64 dra7xx_pcie_cpu_addr_fixup(struct dw_pcie *pci, u64 pci_addr)
{
return pci_addr & DRA7XX_CPU_TO_BUS_ADDR;
}
diff --git a/drivers/pci/dwc/pcie-artpec6.c b/drivers/pci/dwc/pcie-artpec6.c
index e7de4e4649eb..318a2bd0d97e 100644
--- a/drivers/pci/dwc/pcie-artpec6.c
+++ b/drivers/pci/dwc/pcie-artpec6.c
@@ -67,8 +67,6 @@ static const struct of_device_id artpec6_pcie_of_match[];
#define PHY_STATUS 0x118
#define PHY_COSPLLLOCK BIT(0)
-#define ARTPEC6_CPU_TO_BUS_ADDR GENMASK(27, 0)
-
static u32 artpec6_pcie_readl(struct artpec6_pcie *artpec6_pcie, u32 offset)
{
u32 val;
@@ -82,9 +80,21 @@ static void artpec6_pcie_writel(struct artpec6_pcie *artpec6_pcie, u32 offset, u
regmap_write(artpec6_pcie->regmap, offset, val);
}
-static u64 artpec6_pcie_cpu_addr_fixup(u64 pci_addr)
+static u64 artpec6_pcie_cpu_addr_fixup(struct dw_pcie *pci, u64 pci_addr)
{
- return pci_addr & ARTPEC6_CPU_TO_BUS_ADDR;
+ struct artpec6_pcie *artpec6_pcie = to_artpec6_pcie(pci);
+ struct pcie_port *pp = &pci->pp;
+ struct dw_pcie_ep *ep = &pci->ep;
+
+ switch (artpec6_pcie->mode) {
+ case DW_PCIE_RC_TYPE:
+ return pci_addr - pp->cfg0_base;
+ case DW_PCIE_EP_TYPE:
+ return pci_addr - ep->phys_base;
+ default:
+ dev_err(pci->dev, "UNKNOWN device type\n");
+ }
+ return pci_addr;
}
static int artpec6_pcie_establish_link(struct dw_pcie *pci)
diff --git a/drivers/pci/dwc/pcie-designware.c b/drivers/pci/dwc/pcie-designware.c
index 88abdddee2ad..800be7a4f087 100644
--- a/drivers/pci/dwc/pcie-designware.c
+++ b/drivers/pci/dwc/pcie-designware.c
@@ -149,7 +149,7 @@ void dw_pcie_prog_outbound_atu(struct dw_pcie *pci, int index, int type,
u32 retries, val;
if (pci->ops->cpu_addr_fixup)
- cpu_addr = pci->ops->cpu_addr_fixup(cpu_addr);
+ cpu_addr = pci->ops->cpu_addr_fixup(pci, cpu_addr);
if (pci->iatu_unroll_enabled) {
dw_pcie_prog_outbound_atu_unroll(pci, index, type, cpu_addr,
diff --git a/drivers/pci/dwc/pcie-designware.h b/drivers/pci/dwc/pcie-designware.h
index 24edac035160..cca5a81c1c74 100644
--- a/drivers/pci/dwc/pcie-designware.h
+++ b/drivers/pci/dwc/pcie-designware.h
@@ -205,7 +205,7 @@ struct dw_pcie_ep {
};
struct dw_pcie_ops {
- u64 (*cpu_addr_fixup)(u64 cpu_addr);
+ u64 (*cpu_addr_fixup)(struct dw_pcie *pcie, u64 cpu_addr);
u32 (*read_dbi)(struct dw_pcie *pcie, void __iomem *base, u32 reg,
size_t size);
void (*write_dbi)(struct dw_pcie *pcie, void __iomem *base, u32 reg,
--
2.14.2
next prev parent reply other threads:[~2017-12-19 23:29 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-19 23:29 [PATCH v6 00/18] dwc MSI fixes, ARTPEC-6 EP mode support, ARTPEC-7 SoC support Niklas Cassel
2017-12-19 23:29 ` Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 01/18] PCI: dwc: Use the DMA-API to get the MSI address Niklas Cassel
2017-12-20 19:10 ` Joao Pinto
2017-12-21 16:43 ` Jingoo Han
2017-12-21 16:43 ` Jingoo Han
2020-09-23 23:18 ` Rob Herring
2017-12-19 23:29 ` [PATCH v6 02/18] PCI: designware-ep: dw_pcie_ep_set_msi() should only set MMC bits Niklas Cassel
2017-12-20 19:17 ` Joao Pinto
2017-12-21 16:44 ` Jingoo Han
2017-12-21 16:44 ` Jingoo Han
2017-12-19 23:29 ` [PATCH v6 03/18] PCI: designware-ep: Read-only registers need DBI_RO_WR_EN to be writable Niklas Cassel
2017-12-20 19:18 ` Joao Pinto
2017-12-21 16:45 ` Jingoo Han
2017-12-21 16:45 ` Jingoo Han
2017-12-19 23:29 ` [PATCH v6 04/18] PCI: designware-ep: Pre-allocate memory for MSI in dw_pcie_ep_init Niklas Cassel
2017-12-20 19:30 ` Joao Pinto
2017-12-21 16:46 ` Jingoo Han
2017-12-21 16:46 ` Jingoo Han
2017-12-19 23:29 ` [PATCH v6 05/18] PCI: designware-ep: Remove static keyword from dw_pcie_ep_reset_bar() Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 06/18] PCI: designware-ep: Add generic function for raising MSI irq Niklas Cassel
2017-12-20 19:32 ` Joao Pinto
2017-12-21 16:47 ` Jingoo Han
2017-12-21 16:47 ` Jingoo Han
2017-12-26 12:50 ` Kishon Vijay Abraham I
2017-12-27 22:29 ` Niklas Cassel
2017-12-28 8:06 ` Kishon Vijay Abraham I
2017-12-28 14:39 ` Kishon Vijay Abraham I
2017-12-28 22:43 ` Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 07/18] PCI: dwc: dra7xx: Refactor Kconfig and Makefile handling for host/ep mode Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 08/18] PCI: dwc: dra7xx: Assign pp->ops in dra7xx_add_pcie_port() rather than in probe Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 09/18] PCI: dwc: dra7xx: Help compiler to remove unused code Niklas Cassel
2017-12-20 5:58 ` Kishon Vijay Abraham I
2017-12-20 5:58 ` Kishon Vijay Abraham I
2017-12-19 23:29 ` [PATCH v6 10/18] PCI: dwc: artpec6: Remove unused defines Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 11/18] PCI: dwc: artpec6: Use BIT and GENMASK macros Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 12/18] PCI: dwc: artpec6: Split artpec6_pcie_establish_link() into smaller functions Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 13/18] bindings: PCI: artpec: Add support for endpoint mode Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 14/18] PCI: dwc: artpec6: " Niklas Cassel
2017-12-19 23:29 ` Niklas Cassel [this message]
2017-12-20 5:52 ` [PATCH v6 15/18] PCI: dwc: Make cpu_addr_fixup take struct dw_pcie as argument Kishon Vijay Abraham I
2017-12-20 5:52 ` Kishon Vijay Abraham I
2017-12-19 23:29 ` [PATCH v6 16/18] PCI: dwc: artpec6: Deassert the core before waiting for PHY Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 17/18] bindings: PCI: artpec: Add support for the ARTPEC-7 SoC Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 18/18] PCI: dwc: artpec6: " Niklas Cassel
2017-12-20 17:34 ` [PATCH v6 00/18] dwc MSI fixes, ARTPEC-6 EP mode support, ARTPEC-7 SoC support Lorenzo Pieralisi
2017-12-20 19:47 ` Joao Pinto
2017-12-20 19:47 ` Joao Pinto
2017-12-20 23:22 ` Niklas Cassel
2017-12-21 9:23 ` Joao Pinto
2017-12-21 9:23 ` Joao Pinto
[not found] ` <20171219232940.659-1-niklas.cassel-VrBV9hrLPhE@public.gmane.org>
2017-12-21 10:02 ` Lorenzo Pieralisi
2017-12-21 10:02 ` Lorenzo Pieralisi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171219232940.659-16-niklas.cassel@axis.com \
--to=niklas.cassel@axis.com \
--cc=Joao.Pinto@synopsys.com \
--cc=bhelgaas@google.com \
--cc=jespern@axis.com \
--cc=jingoohan1@gmail.com \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@axis.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-omap@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=niklass@axis.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.