From: Niklas Cassel <niklas.cassel-VrBV9hrLPhE@public.gmane.org>
To: linux-arm-kernel-VrBV9hrLPhE@public.gmane.org,
linux-pci-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Cc: lorenzo.pieralisi-5wv7dgnIgG8@public.gmane.org,
Niklas Cassel <niklass-VrBV9hrLPhE@public.gmane.org>,
devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
Subject: [PATCH v6 00/18] dwc MSI fixes, ARTPEC-6 EP mode support, ARTPEC-7 SoC support
Date: Wed, 20 Dec 2017 00:29:21 +0100 [thread overview]
Message-ID: <20171219232940.659-1-niklas.cassel@axis.com> (raw)
This is a series that adds:
- PCI endpoint mode support in the ARTPEC-6 driver.
- ARTPEC-7 SoC support in the ARTPEC-6 driver (the SoCs are very similar).
- Small fixes for MSI in designware-ep and designware-host,
needed to get endpoint mode support working for ARTPEC-6.
- Cleanups in pci-dra7xx to better prepare for endpoint mode in other
DWC based PCIe drivers.
Changes since V5:
-Dropped GFP_DMA32 from "PCI: dwc: Use the DMA-API to get the MSI address"
so that we use the exact same GFP flags as before.
-Rewrote commit message for "PCI: dwc: Make cpu_addr_fixup take struct
dw_pcie as argument" to be more detailed.
Niklas Cassel (18):
PCI: dwc: Use the DMA-API to get the MSI address
PCI: designware-ep: dw_pcie_ep_set_msi() should only set MMC bits
PCI: designware-ep: Read-only registers need DBI_RO_WR_EN to be
writable
PCI: designware-ep: Pre-allocate memory for MSI in dw_pcie_ep_init
PCI: designware-ep: Remove static keyword from dw_pcie_ep_reset_bar()
PCI: designware-ep: Add generic function for raising MSI irq
PCI: dwc: dra7xx: Refactor Kconfig and Makefile handling for host/ep
mode
PCI: dwc: dra7xx: Assign pp->ops in dra7xx_add_pcie_port() rather than
in probe
PCI: dwc: dra7xx: Help compiler to remove unused code
PCI: dwc: artpec6: Remove unused defines
PCI: dwc: artpec6: Use BIT and GENMASK macros
PCI: dwc: artpec6: Split artpec6_pcie_establish_link() into smaller
functions
bindings: PCI: artpec: Add support for endpoint mode
PCI: dwc: artpec6: Add support for endpoint mode
PCI: dwc: Make cpu_addr_fixup take struct dw_pcie as argument
PCI: dwc: artpec6: Deassert the core before waiting for PHY
bindings: PCI: artpec: Add support for the ARTPEC-7 SoC
PCI: dwc: artpec6: Add support for the ARTPEC-7 SoC
.../devicetree/bindings/pci/axis,artpec6-pcie.txt | 5 +-
drivers/pci/dwc/Kconfig | 68 +--
drivers/pci/dwc/Makefile | 4 +-
drivers/pci/dwc/pci-dra7xx.c | 27 +-
drivers/pci/dwc/pcie-artpec6.c | 470 ++++++++++++++++++---
drivers/pci/dwc/pcie-designware-ep.c | 59 ++-
drivers/pci/dwc/pcie-designware-host.c | 15 +-
drivers/pci/dwc/pcie-designware.c | 2 +-
drivers/pci/dwc/pcie-designware.h | 22 +-
9 files changed, 554 insertions(+), 118 deletions(-)
--
2.14.2
--
To unsubscribe from this list: send the line "unsubscribe devicetree" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at http://vger.kernel.org/majordomo-info.html
WARNING: multiple messages have this Message-ID (diff)
From: Niklas Cassel <niklas.cassel@axis.com>
To: linux-arm-kernel@axis.com, linux-pci@vger.kernel.org,
linux-omap@vger.kernel.org
Cc: lorenzo.pieralisi@arm.com, Niklas Cassel <niklass@axis.com>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH v6 00/18] dwc MSI fixes, ARTPEC-6 EP mode support, ARTPEC-7 SoC support
Date: Wed, 20 Dec 2017 00:29:21 +0100 [thread overview]
Message-ID: <20171219232940.659-1-niklas.cassel@axis.com> (raw)
This is a series that adds:
- PCI endpoint mode support in the ARTPEC-6 driver.
- ARTPEC-7 SoC support in the ARTPEC-6 driver (the SoCs are very similar).
- Small fixes for MSI in designware-ep and designware-host,
needed to get endpoint mode support working for ARTPEC-6.
- Cleanups in pci-dra7xx to better prepare for endpoint mode in other
DWC based PCIe drivers.
Changes since V5:
-Dropped GFP_DMA32 from "PCI: dwc: Use the DMA-API to get the MSI address"
so that we use the exact same GFP flags as before.
-Rewrote commit message for "PCI: dwc: Make cpu_addr_fixup take struct
dw_pcie as argument" to be more detailed.
Niklas Cassel (18):
PCI: dwc: Use the DMA-API to get the MSI address
PCI: designware-ep: dw_pcie_ep_set_msi() should only set MMC bits
PCI: designware-ep: Read-only registers need DBI_RO_WR_EN to be
writable
PCI: designware-ep: Pre-allocate memory for MSI in dw_pcie_ep_init
PCI: designware-ep: Remove static keyword from dw_pcie_ep_reset_bar()
PCI: designware-ep: Add generic function for raising MSI irq
PCI: dwc: dra7xx: Refactor Kconfig and Makefile handling for host/ep
mode
PCI: dwc: dra7xx: Assign pp->ops in dra7xx_add_pcie_port() rather than
in probe
PCI: dwc: dra7xx: Help compiler to remove unused code
PCI: dwc: artpec6: Remove unused defines
PCI: dwc: artpec6: Use BIT and GENMASK macros
PCI: dwc: artpec6: Split artpec6_pcie_establish_link() into smaller
functions
bindings: PCI: artpec: Add support for endpoint mode
PCI: dwc: artpec6: Add support for endpoint mode
PCI: dwc: Make cpu_addr_fixup take struct dw_pcie as argument
PCI: dwc: artpec6: Deassert the core before waiting for PHY
bindings: PCI: artpec: Add support for the ARTPEC-7 SoC
PCI: dwc: artpec6: Add support for the ARTPEC-7 SoC
.../devicetree/bindings/pci/axis,artpec6-pcie.txt | 5 +-
drivers/pci/dwc/Kconfig | 68 +--
drivers/pci/dwc/Makefile | 4 +-
drivers/pci/dwc/pci-dra7xx.c | 27 +-
drivers/pci/dwc/pcie-artpec6.c | 470 ++++++++++++++++++---
drivers/pci/dwc/pcie-designware-ep.c | 59 ++-
drivers/pci/dwc/pcie-designware-host.c | 15 +-
drivers/pci/dwc/pcie-designware.c | 2 +-
drivers/pci/dwc/pcie-designware.h | 22 +-
9 files changed, 554 insertions(+), 118 deletions(-)
--
2.14.2
next reply other threads:[~2017-12-19 23:29 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-19 23:29 Niklas Cassel [this message]
2017-12-19 23:29 ` [PATCH v6 00/18] dwc MSI fixes, ARTPEC-6 EP mode support, ARTPEC-7 SoC support Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 01/18] PCI: dwc: Use the DMA-API to get the MSI address Niklas Cassel
2017-12-20 19:10 ` Joao Pinto
2017-12-21 16:43 ` Jingoo Han
2017-12-21 16:43 ` Jingoo Han
2020-09-23 23:18 ` Rob Herring
2017-12-19 23:29 ` [PATCH v6 02/18] PCI: designware-ep: dw_pcie_ep_set_msi() should only set MMC bits Niklas Cassel
2017-12-20 19:17 ` Joao Pinto
2017-12-21 16:44 ` Jingoo Han
2017-12-21 16:44 ` Jingoo Han
2017-12-19 23:29 ` [PATCH v6 03/18] PCI: designware-ep: Read-only registers need DBI_RO_WR_EN to be writable Niklas Cassel
2017-12-20 19:18 ` Joao Pinto
2017-12-21 16:45 ` Jingoo Han
2017-12-21 16:45 ` Jingoo Han
2017-12-19 23:29 ` [PATCH v6 04/18] PCI: designware-ep: Pre-allocate memory for MSI in dw_pcie_ep_init Niklas Cassel
2017-12-20 19:30 ` Joao Pinto
2017-12-21 16:46 ` Jingoo Han
2017-12-21 16:46 ` Jingoo Han
2017-12-19 23:29 ` [PATCH v6 05/18] PCI: designware-ep: Remove static keyword from dw_pcie_ep_reset_bar() Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 06/18] PCI: designware-ep: Add generic function for raising MSI irq Niklas Cassel
2017-12-20 19:32 ` Joao Pinto
2017-12-21 16:47 ` Jingoo Han
2017-12-21 16:47 ` Jingoo Han
2017-12-26 12:50 ` Kishon Vijay Abraham I
2017-12-27 22:29 ` Niklas Cassel
2017-12-28 8:06 ` Kishon Vijay Abraham I
2017-12-28 14:39 ` Kishon Vijay Abraham I
2017-12-28 22:43 ` Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 07/18] PCI: dwc: dra7xx: Refactor Kconfig and Makefile handling for host/ep mode Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 08/18] PCI: dwc: dra7xx: Assign pp->ops in dra7xx_add_pcie_port() rather than in probe Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 09/18] PCI: dwc: dra7xx: Help compiler to remove unused code Niklas Cassel
2017-12-20 5:58 ` Kishon Vijay Abraham I
2017-12-20 5:58 ` Kishon Vijay Abraham I
2017-12-19 23:29 ` [PATCH v6 10/18] PCI: dwc: artpec6: Remove unused defines Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 11/18] PCI: dwc: artpec6: Use BIT and GENMASK macros Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 12/18] PCI: dwc: artpec6: Split artpec6_pcie_establish_link() into smaller functions Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 13/18] bindings: PCI: artpec: Add support for endpoint mode Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 14/18] PCI: dwc: artpec6: " Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 15/18] PCI: dwc: Make cpu_addr_fixup take struct dw_pcie as argument Niklas Cassel
2017-12-20 5:52 ` Kishon Vijay Abraham I
2017-12-20 5:52 ` Kishon Vijay Abraham I
2017-12-19 23:29 ` [PATCH v6 16/18] PCI: dwc: artpec6: Deassert the core before waiting for PHY Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 17/18] bindings: PCI: artpec: Add support for the ARTPEC-7 SoC Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 18/18] PCI: dwc: artpec6: " Niklas Cassel
2017-12-20 17:34 ` [PATCH v6 00/18] dwc MSI fixes, ARTPEC-6 EP mode support, ARTPEC-7 SoC support Lorenzo Pieralisi
2017-12-20 19:47 ` Joao Pinto
2017-12-20 19:47 ` Joao Pinto
2017-12-20 23:22 ` Niklas Cassel
2017-12-21 9:23 ` Joao Pinto
2017-12-21 9:23 ` Joao Pinto
[not found] ` <20171219232940.659-1-niklas.cassel-VrBV9hrLPhE@public.gmane.org>
2017-12-21 10:02 ` Lorenzo Pieralisi
2017-12-21 10:02 ` Lorenzo Pieralisi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171219232940.659-1-niklas.cassel@axis.com \
--to=niklas.cassel-vrbv9hrlphe@public.gmane.org \
--cc=devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-arm-kernel-VrBV9hrLPhE@public.gmane.org \
--cc=linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-omap-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=linux-pci-u79uwXL29TY76Z2rM5mHXA@public.gmane.org \
--cc=lorenzo.pieralisi-5wv7dgnIgG8@public.gmane.org \
--cc=niklass-VrBV9hrLPhE@public.gmane.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.