From: Niklas Cassel <niklas.cassel@axis.com>
To: Niklas Cassel <niklass@axis.com>,
Jesper Nilsson <jespern@axis.com>,
Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
Bjorn Helgaas <bhelgaas@google.com>
Cc: linux-arm-kernel@axis.com, linux-pci@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH v6 18/18] PCI: dwc: artpec6: Add support for the ARTPEC-7 SoC
Date: Wed, 20 Dec 2017 00:29:39 +0100 [thread overview]
Message-ID: <20171219232940.659-19-niklas.cassel@axis.com> (raw)
In-Reply-To: <20171219232940.659-1-niklas.cassel@axis.com>
Add support for the ARTPEC-7 SoC in the artpec6 driver.
The ARTPEC-6 SoC and the ARTPEC-7 SoC are very similar.
Unfortunately, some fields in the PCIECFG and PCIESTAT
register have changed.
Signed-off-by: Niklas Cassel <niklas.cassel@axis.com>
---
drivers/pci/dwc/pcie-artpec6.c | 187 ++++++++++++++++++++++++++++++++++++++++-
1 file changed, 183 insertions(+), 4 deletions(-)
diff --git a/drivers/pci/dwc/pcie-artpec6.c b/drivers/pci/dwc/pcie-artpec6.c
index 064c5a93ea80..312f21b6e013 100644
--- a/drivers/pci/dwc/pcie-artpec6.c
+++ b/drivers/pci/dwc/pcie-artpec6.c
@@ -27,14 +27,21 @@
#define to_artpec6_pcie(x) dev_get_drvdata((x)->dev)
+enum artpec_pcie_variants {
+ ARTPEC6,
+ ARTPEC7,
+};
+
struct artpec6_pcie {
struct dw_pcie *pci;
struct regmap *regmap; /* DT axis,syscon-pcie */
void __iomem *phy_base; /* DT phy */
+ enum artpec_pcie_variants variant;
enum dw_pcie_device_mode mode;
};
struct artpec_pcie_of_data {
+ enum artpec_pcie_variants variant;
enum dw_pcie_device_mode mode;
};
@@ -43,6 +50,13 @@ static const struct of_device_id artpec6_pcie_of_match[];
/* PCIe Port Logic registers (memory-mapped) */
#define PL_OFFSET 0x700
+#define ACK_F_ASPM_CTRL_OFF (PL_OFFSET + 0xc)
+#define ACK_N_FTS_MASK GENMASK(15, 8)
+#define ACK_N_FTS(x) (((x) << 8) & ACK_N_FTS_MASK)
+
+#define FAST_TRAINING_SEQ_MASK GENMASK(7, 0)
+#define FAST_TRAINING_SEQ(x) (((x) << 0) & FAST_TRAINING_SEQ_MASK)
+
/* ARTPEC-6 specific registers */
#define PCIECFG 0x18
#define PCIECFG_DBG_OEN BIT(24)
@@ -57,6 +71,13 @@ static const struct of_device_id artpec6_pcie_of_match[];
#define PCIECFG_MODE_TX_DRV_EN BIT(3)
#define PCIECFG_CISRREN BIT(2)
#define PCIECFG_MACRO_ENABLE BIT(0)
+/* ARTPEC-7 specific fields */
+#define PCIECFG_REFCLKSEL BIT(23)
+#define PCIECFG_NOC_RESET BIT(3)
+
+#define PCIESTAT 0x1c
+/* ARTPEC-7 specific fields */
+#define PCIESTAT_EXTREFCLK BIT(3)
#define NOCCFG 0x40
#define NOCCFG_ENABLE_CLK_PCIE BIT(4)
@@ -67,6 +88,12 @@ static const struct of_device_id artpec6_pcie_of_match[];
#define PHY_STATUS 0x118
#define PHY_COSPLLLOCK BIT(0)
+#define PHY_TX_ASIC_OUT 0x4040
+#define PHY_TX_ASIC_OUT_TX_ACK BIT(0)
+
+#define PHY_RX_ASIC_OUT 0x405c
+#define PHY_RX_ASIC_OUT_ACK BIT(0)
+
static u32 artpec6_pcie_readl(struct artpec6_pcie *artpec6_pcie, u32 offset)
{
u32 val;
@@ -125,7 +152,7 @@ static const struct dw_pcie_ops dw_pcie_ops = {
.stop_link = artpec6_pcie_stop_link,
};
-static void artpec6_pcie_wait_for_phy(struct artpec6_pcie *artpec6_pcie)
+static void artpec6_pcie_wait_for_phy_a6(struct artpec6_pcie *artpec6_pcie)
{
struct dw_pcie *pci = artpec6_pcie->pci;
struct device *dev = pci->dev;
@@ -152,7 +179,49 @@ static void artpec6_pcie_wait_for_phy(struct artpec6_pcie *artpec6_pcie)
dev_err(dev, "PHY PLL did not lock\n");
}
-static void artpec6_pcie_init_phy(struct artpec6_pcie *artpec6_pcie)
+static void artpec6_pcie_wait_for_phy_a7(struct artpec6_pcie *artpec6_pcie)
+{
+ struct dw_pcie *pci = artpec6_pcie->pci;
+ struct device *dev = pci->dev;
+ u32 val;
+ u16 phy_status_tx, phy_status_rx;
+ unsigned int retries;
+
+ retries = 50;
+ do {
+ usleep_range(1000, 2000);
+ val = artpec6_pcie_readl(artpec6_pcie, NOCCFG);
+ retries--;
+ } while (retries &&
+ (val & (NOCCFG_POWER_PCIE_IDLEACK | NOCCFG_POWER_PCIE_IDLE)));
+ if (!retries)
+ dev_err(dev, "PCIe clock manager did not leave idle state\n");
+
+ retries = 50;
+ do {
+ usleep_range(1000, 2000);
+ phy_status_tx = readw(artpec6_pcie->phy_base + PHY_TX_ASIC_OUT);
+ phy_status_rx = readw(artpec6_pcie->phy_base + PHY_RX_ASIC_OUT);
+ retries--;
+ } while (retries && ((phy_status_tx & PHY_TX_ASIC_OUT_TX_ACK) ||
+ (phy_status_rx & PHY_RX_ASIC_OUT_ACK)));
+ if (!retries)
+ dev_err(dev, "PHY did not enter Pn state\n");
+}
+
+static void artpec6_pcie_wait_for_phy(struct artpec6_pcie *artpec6_pcie)
+{
+ switch (artpec6_pcie->variant) {
+ case ARTPEC6:
+ artpec6_pcie_wait_for_phy_a6(artpec6_pcie);
+ break;
+ case ARTPEC7:
+ artpec6_pcie_wait_for_phy_a7(artpec6_pcie);
+ break;
+ }
+}
+
+static void artpec6_pcie_init_phy_a6(struct artpec6_pcie *artpec6_pcie)
{
u32 val;
@@ -182,12 +251,90 @@ static void artpec6_pcie_init_phy(struct artpec6_pcie *artpec6_pcie)
artpec6_pcie_writel(artpec6_pcie, NOCCFG, val);
}
+static void artpec6_pcie_init_phy_a7(struct artpec6_pcie *artpec6_pcie)
+{
+ struct dw_pcie *pci = artpec6_pcie->pci;
+ u32 val;
+ bool extrefclk;
+
+ /* Check if external reference clock is connected */
+ val = artpec6_pcie_readl(artpec6_pcie, PCIESTAT);
+ extrefclk = !!(val & PCIESTAT_EXTREFCLK);
+ dev_dbg(pci->dev, "Using reference clock: %s\n",
+ extrefclk ? "external" : "internal");
+
+ val = artpec6_pcie_readl(artpec6_pcie, PCIECFG);
+ val |= PCIECFG_RISRCREN | /* Receiver term. 50 Ohm */
+ PCIECFG_PCLK_ENABLE;
+ if (extrefclk)
+ val |= PCIECFG_REFCLKSEL;
+ else
+ val &= ~PCIECFG_REFCLKSEL;
+ artpec6_pcie_writel(artpec6_pcie, PCIECFG, val);
+ usleep_range(10, 20);
+
+ val = artpec6_pcie_readl(artpec6_pcie, NOCCFG);
+ val |= NOCCFG_ENABLE_CLK_PCIE;
+ artpec6_pcie_writel(artpec6_pcie, NOCCFG, val);
+ usleep_range(20, 30);
+
+ val = artpec6_pcie_readl(artpec6_pcie, NOCCFG);
+ val &= ~NOCCFG_POWER_PCIE_IDLEREQ;
+ artpec6_pcie_writel(artpec6_pcie, NOCCFG, val);
+}
+
+static void artpec6_pcie_init_phy(struct artpec6_pcie *artpec6_pcie)
+{
+ switch (artpec6_pcie->variant) {
+ case ARTPEC6:
+ artpec6_pcie_init_phy_a6(artpec6_pcie);
+ break;
+ case ARTPEC7:
+ artpec6_pcie_init_phy_a7(artpec6_pcie);
+ break;
+ }
+}
+
+static void artpec6_pcie_set_nfts(struct artpec6_pcie *artpec6_pcie)
+{
+ struct dw_pcie *pci = artpec6_pcie->pci;
+ u32 val;
+
+ if (artpec6_pcie->variant != ARTPEC7)
+ return;
+
+ /*
+ * Increase the N_FTS (Number of Fast Training Sequences)
+ * to be transmitted when transitioning from L0s to L0.
+ */
+ val = dw_pcie_readl_dbi(pci, ACK_F_ASPM_CTRL_OFF);
+ val &= ~ACK_N_FTS_MASK;
+ val |= ACK_N_FTS(180);
+ dw_pcie_writel_dbi(pci, ACK_F_ASPM_CTRL_OFF, val);
+
+ /*
+ * Set the Number of Fast Training Sequences that the core
+ * advertises as its N_FTS during Gen2 or Gen3 link training.
+ */
+ val = dw_pcie_readl_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL);
+ val &= ~FAST_TRAINING_SEQ_MASK;
+ val |= FAST_TRAINING_SEQ(180);
+ dw_pcie_writel_dbi(pci, PCIE_LINK_WIDTH_SPEED_CONTROL, val);
+}
+
static void artpec6_pcie_assert_core_reset(struct artpec6_pcie *artpec6_pcie)
{
u32 val;
val = artpec6_pcie_readl(artpec6_pcie, PCIECFG);
- val |= PCIECFG_CORE_RESET_REQ;
+ switch (artpec6_pcie->variant) {
+ case ARTPEC6:
+ val |= PCIECFG_CORE_RESET_REQ;
+ break;
+ case ARTPEC7:
+ val &= ~PCIECFG_NOC_RESET;
+ break;
+ }
artpec6_pcie_writel(artpec6_pcie, PCIECFG, val);
}
@@ -196,7 +343,14 @@ static void artpec6_pcie_deassert_core_reset(struct artpec6_pcie *artpec6_pcie)
u32 val;
val = artpec6_pcie_readl(artpec6_pcie, PCIECFG);
- val &= ~PCIECFG_CORE_RESET_REQ;
+ switch (artpec6_pcie->variant) {
+ case ARTPEC6:
+ val &= ~PCIECFG_CORE_RESET_REQ;
+ break;
+ case ARTPEC7:
+ val |= PCIECFG_NOC_RESET;
+ break;
+ }
artpec6_pcie_writel(artpec6_pcie, PCIECFG, val);
usleep_range(100, 200);
}
@@ -219,6 +373,7 @@ static int artpec6_pcie_host_init(struct pcie_port *pp)
artpec6_pcie_init_phy(artpec6_pcie);
artpec6_pcie_deassert_core_reset(artpec6_pcie);
artpec6_pcie_wait_for_phy(artpec6_pcie);
+ artpec6_pcie_set_nfts(artpec6_pcie);
dw_pcie_setup_rc(pp);
artpec6_pcie_establish_link(pci);
dw_pcie_wait_for_link(pci);
@@ -287,6 +442,7 @@ static void artpec6_pcie_ep_init(struct dw_pcie_ep *ep)
artpec6_pcie_init_phy(artpec6_pcie);
artpec6_pcie_deassert_core_reset(artpec6_pcie);
artpec6_pcie_wait_for_phy(artpec6_pcie);
+ artpec6_pcie_set_nfts(artpec6_pcie);
for (bar = BAR_0; bar <= BAR_5; bar++)
dw_pcie_ep_reset_bar(pci, bar);
@@ -358,6 +514,7 @@ static int artpec6_pcie_probe(struct platform_device *pdev)
int ret;
const struct of_device_id *match;
const struct artpec_pcie_of_data *data;
+ enum artpec_pcie_variants variant;
enum dw_pcie_device_mode mode;
match = of_match_device(artpec6_pcie_of_match, dev);
@@ -365,6 +522,7 @@ static int artpec6_pcie_probe(struct platform_device *pdev)
return -EINVAL;
data = (struct artpec_pcie_of_data *)match->data;
+ variant = (enum artpec_pcie_variants)data->variant;
mode = (enum dw_pcie_device_mode)data->mode;
artpec6_pcie = devm_kzalloc(dev, sizeof(*artpec6_pcie), GFP_KERNEL);
@@ -379,6 +537,7 @@ static int artpec6_pcie_probe(struct platform_device *pdev)
pci->ops = &dw_pcie_ops;
artpec6_pcie->pci = pci;
+ artpec6_pcie->variant = variant;
artpec6_pcie->mode = mode;
dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "dbi");
@@ -430,10 +589,22 @@ static int artpec6_pcie_probe(struct platform_device *pdev)
}
static const struct artpec_pcie_of_data artpec6_pcie_rc_of_data = {
+ .variant = ARTPEC6,
.mode = DW_PCIE_RC_TYPE,
};
static const struct artpec_pcie_of_data artpec6_pcie_ep_of_data = {
+ .variant = ARTPEC6,
+ .mode = DW_PCIE_EP_TYPE,
+};
+
+static const struct artpec_pcie_of_data artpec7_pcie_rc_of_data = {
+ .variant = ARTPEC7,
+ .mode = DW_PCIE_RC_TYPE,
+};
+
+static const struct artpec_pcie_of_data artpec7_pcie_ep_of_data = {
+ .variant = ARTPEC7,
.mode = DW_PCIE_EP_TYPE,
};
@@ -446,6 +617,14 @@ static const struct of_device_id artpec6_pcie_of_match[] = {
.compatible = "axis,artpec6-pcie-ep",
.data = &artpec6_pcie_ep_of_data,
},
+ {
+ .compatible = "axis,artpec7-pcie",
+ .data = &artpec7_pcie_rc_of_data,
+ },
+ {
+ .compatible = "axis,artpec7-pcie-ep",
+ .data = &artpec7_pcie_ep_of_data,
+ },
{},
};
--
2.14.2
next prev parent reply other threads:[~2017-12-19 23:29 UTC|newest]
Thread overview: 53+ messages / expand[flat|nested] mbox.gz Atom feed top
2017-12-19 23:29 [PATCH v6 00/18] dwc MSI fixes, ARTPEC-6 EP mode support, ARTPEC-7 SoC support Niklas Cassel
2017-12-19 23:29 ` Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 01/18] PCI: dwc: Use the DMA-API to get the MSI address Niklas Cassel
2017-12-20 19:10 ` Joao Pinto
2017-12-21 16:43 ` Jingoo Han
2017-12-21 16:43 ` Jingoo Han
2020-09-23 23:18 ` Rob Herring
2017-12-19 23:29 ` [PATCH v6 02/18] PCI: designware-ep: dw_pcie_ep_set_msi() should only set MMC bits Niklas Cassel
2017-12-20 19:17 ` Joao Pinto
2017-12-21 16:44 ` Jingoo Han
2017-12-21 16:44 ` Jingoo Han
2017-12-19 23:29 ` [PATCH v6 03/18] PCI: designware-ep: Read-only registers need DBI_RO_WR_EN to be writable Niklas Cassel
2017-12-20 19:18 ` Joao Pinto
2017-12-21 16:45 ` Jingoo Han
2017-12-21 16:45 ` Jingoo Han
2017-12-19 23:29 ` [PATCH v6 04/18] PCI: designware-ep: Pre-allocate memory for MSI in dw_pcie_ep_init Niklas Cassel
2017-12-20 19:30 ` Joao Pinto
2017-12-21 16:46 ` Jingoo Han
2017-12-21 16:46 ` Jingoo Han
2017-12-19 23:29 ` [PATCH v6 05/18] PCI: designware-ep: Remove static keyword from dw_pcie_ep_reset_bar() Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 06/18] PCI: designware-ep: Add generic function for raising MSI irq Niklas Cassel
2017-12-20 19:32 ` Joao Pinto
2017-12-21 16:47 ` Jingoo Han
2017-12-21 16:47 ` Jingoo Han
2017-12-26 12:50 ` Kishon Vijay Abraham I
2017-12-27 22:29 ` Niklas Cassel
2017-12-28 8:06 ` Kishon Vijay Abraham I
2017-12-28 14:39 ` Kishon Vijay Abraham I
2017-12-28 22:43 ` Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 07/18] PCI: dwc: dra7xx: Refactor Kconfig and Makefile handling for host/ep mode Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 08/18] PCI: dwc: dra7xx: Assign pp->ops in dra7xx_add_pcie_port() rather than in probe Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 09/18] PCI: dwc: dra7xx: Help compiler to remove unused code Niklas Cassel
2017-12-20 5:58 ` Kishon Vijay Abraham I
2017-12-20 5:58 ` Kishon Vijay Abraham I
2017-12-19 23:29 ` [PATCH v6 10/18] PCI: dwc: artpec6: Remove unused defines Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 11/18] PCI: dwc: artpec6: Use BIT and GENMASK macros Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 12/18] PCI: dwc: artpec6: Split artpec6_pcie_establish_link() into smaller functions Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 13/18] bindings: PCI: artpec: Add support for endpoint mode Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 14/18] PCI: dwc: artpec6: " Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 15/18] PCI: dwc: Make cpu_addr_fixup take struct dw_pcie as argument Niklas Cassel
2017-12-20 5:52 ` Kishon Vijay Abraham I
2017-12-20 5:52 ` Kishon Vijay Abraham I
2017-12-19 23:29 ` [PATCH v6 16/18] PCI: dwc: artpec6: Deassert the core before waiting for PHY Niklas Cassel
2017-12-19 23:29 ` [PATCH v6 17/18] bindings: PCI: artpec: Add support for the ARTPEC-7 SoC Niklas Cassel
2017-12-19 23:29 ` Niklas Cassel [this message]
2017-12-20 17:34 ` [PATCH v6 00/18] dwc MSI fixes, ARTPEC-6 EP mode support, ARTPEC-7 SoC support Lorenzo Pieralisi
2017-12-20 19:47 ` Joao Pinto
2017-12-20 19:47 ` Joao Pinto
2017-12-20 23:22 ` Niklas Cassel
2017-12-21 9:23 ` Joao Pinto
2017-12-21 9:23 ` Joao Pinto
[not found] ` <20171219232940.659-1-niklas.cassel-VrBV9hrLPhE@public.gmane.org>
2017-12-21 10:02 ` Lorenzo Pieralisi
2017-12-21 10:02 ` Lorenzo Pieralisi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20171219232940.659-19-niklas.cassel@axis.com \
--to=niklas.cassel@axis.com \
--cc=bhelgaas@google.com \
--cc=jespern@axis.com \
--cc=linux-arm-kernel@axis.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lorenzo.pieralisi@arm.com \
--cc=niklass@axis.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.