[V2,5/5] usb: serial: f81534: fix tx error on some baud rate

[Johan Hovold <johan@kernel.org>]

On Wed, Jan 10, 2018 at 01:42:32PM +0800, Ji-Ze Hong (Peter Hong) wrote:
> Hi Johan,
> 
> Johan Hovold 於 2018/1/9 下午 07:32 寫道:
> > On Thu, Jan 04, 2018 at 10:29:21AM +0800, Ji-Ze Hong (Peter Hong) wrote:
> >> +	/*
> >> +	 * We'll make tx frame error when baud rate from 384~500kps. So we'll
> >> +	 * delay all tx data frame with 1bit.
> >> +	 */
> >> +	port_priv->shadow_clk |= F81534_CLK_TX_DELAY_1BIT;
> > 
> > You don't wan't to enable this only for the affected rates?
> > 
> 
> This bit will control all transmit TX frame always delay 1 bit
> on enabled, but It'll transmit TX frame randomly delay 1 bit on
> disabled.
> 
> We had tested it with BurnInTest to check the performance,
> It'll not make the performance regression. So we'll directly add
> it on all baud rate.

Ok, thanks for confirming.

Johan
---
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo@vger.kernel.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html