All of lore.kernel.org
 help / color / mirror / Atom feed
From: alexandre.belloni@free-electrons.com (Alexandre Belloni)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH 6/7] watchdog: meson: allow setting timeout in devicetree
Date: Sat, 10 Feb 2018 00:19:10 +0100	[thread overview]
Message-ID: <20180209231910.GA2251@piout.net> (raw)
In-Reply-To: <20180209224849.GH19627@roeck-us.net>

Hi Guenter,

On 09/02/2018 at 14:48:49 -0800, Guenter Roeck wrote:
> On Fri, Feb 09, 2018 at 08:27:23PM +0100, Marcus Folkesson wrote:
> > watchdog_init_timeout() will allways pick timeout_param since it
> > defaults to a valid timeout.
> > 
> > By following best practice described in
> > Documentation/watchdog/watchdog-kernel-api.txt, it also
> > let us to set timout-sec property in devicetree.
> > 
> > Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
> 
> Reviewed-by: Guenetr Roeck <linux@roeck-us.net>
                  ^
A small typo in your name


> > ---
> >  Documentation/devicetree/bindings/watchdog/meson-wdt.txt | 4 ++++
> >  drivers/watchdog/meson_wdt.c                             | 2 +-
> >  2 files changed, 5 insertions(+), 1 deletion(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/watchdog/meson-wdt.txt b/Documentation/devicetree/bindings/watchdog/meson-wdt.txt
> > index 8a6d84cb36c9..7588cc3971bf 100644
> > --- a/Documentation/devicetree/bindings/watchdog/meson-wdt.txt
> > +++ b/Documentation/devicetree/bindings/watchdog/meson-wdt.txt
> > @@ -9,9 +9,13 @@ Required properties:
> >  	"amlogic,meson8m2-wdt" and "amlogic,meson8b-wdt" on Meson8m2 SoCs
> >  - reg : Specifies base physical address and size of the registers.
> >  
> > +Optional properties:
> > +- timeout-sec: contains the watchdog timeout in seconds.
> > +
> >  Example:
> >  
> >  wdt: watchdog at c1109900 {
> >  	compatible = "amlogic,meson6-wdt";
> >  	reg = <0xc1109900 0x8>;
> > +	timeout-sec = <10>;
> >  };
> > diff --git a/drivers/watchdog/meson_wdt.c b/drivers/watchdog/meson_wdt.c
> > index 304274c67735..cd0275a6cdac 100644
> > --- a/drivers/watchdog/meson_wdt.c
> > +++ b/drivers/watchdog/meson_wdt.c
> > @@ -36,7 +36,7 @@
> >  #define MESON_SEC_TO_TC(s, c)	((s) * (c))
> >  
> >  static bool nowayout = WATCHDOG_NOWAYOUT;
> > -static unsigned int timeout = MESON_WDT_TIMEOUT;
> > +static unsigned int timeout;
> >  
> >  struct meson_wdt_data {
> >  	unsigned int enable;
> > -- 
> > 2.15.1
> > 

-- 
Alexandre Belloni, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
http://bootlin.com

WARNING: multiple messages have this Message-ID (diff)
From: Alexandre Belloni <alexandre.belloni@free-electrons.com>
To: Guenter Roeck <linux@roeck-us.net>
Cc: Marcus Folkesson <marcus.folkesson@gmail.com>,
	Wim Van Sebroeck <wim@iguana.be>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Carlo Caione <carlo@caione.org>,
	Kevin Hilman <khilman@baylibre.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Barry Song <baohua@kernel.org>,
	Maxime Ripard <maxime.ripard@free-electrons.com>,
	Chen-Yu Tsai <wens@csie.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	Vladimir Zapolskiy <vz@mleia.com>,
	Sylvain Lemieux <slemieux.tyco@gmail.com>,
	Nicolas Ferre <nicolas.ferre@microchip.com>,
	linux-watchdog@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
	linux-mediatek@lists.infradead.org
Subject: Re: [PATCH 6/7] watchdog: meson: allow setting timeout in devicetree
Date: Sat, 10 Feb 2018 00:19:10 +0100	[thread overview]
Message-ID: <20180209231910.GA2251@piout.net> (raw)
In-Reply-To: <20180209224849.GH19627@roeck-us.net>

Hi Guenter,

On 09/02/2018 at 14:48:49 -0800, Guenter Roeck wrote:
> On Fri, Feb 09, 2018 at 08:27:23PM +0100, Marcus Folkesson wrote:
> > watchdog_init_timeout() will allways pick timeout_param since it
> > defaults to a valid timeout.
> > 
> > By following best practice described in
> > Documentation/watchdog/watchdog-kernel-api.txt, it also
> > let us to set timout-sec property in devicetree.
> > 
> > Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
> 
> Reviewed-by: Guenetr Roeck <linux@roeck-us.net>
                  ^
A small typo in your name


> > ---
> >  Documentation/devicetree/bindings/watchdog/meson-wdt.txt | 4 ++++
> >  drivers/watchdog/meson_wdt.c                             | 2 +-
> >  2 files changed, 5 insertions(+), 1 deletion(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/watchdog/meson-wdt.txt b/Documentation/devicetree/bindings/watchdog/meson-wdt.txt
> > index 8a6d84cb36c9..7588cc3971bf 100644
> > --- a/Documentation/devicetree/bindings/watchdog/meson-wdt.txt
> > +++ b/Documentation/devicetree/bindings/watchdog/meson-wdt.txt
> > @@ -9,9 +9,13 @@ Required properties:
> >  	"amlogic,meson8m2-wdt" and "amlogic,meson8b-wdt" on Meson8m2 SoCs
> >  - reg : Specifies base physical address and size of the registers.
> >  
> > +Optional properties:
> > +- timeout-sec: contains the watchdog timeout in seconds.
> > +
> >  Example:
> >  
> >  wdt: watchdog@c1109900 {
> >  	compatible = "amlogic,meson6-wdt";
> >  	reg = <0xc1109900 0x8>;
> > +	timeout-sec = <10>;
> >  };
> > diff --git a/drivers/watchdog/meson_wdt.c b/drivers/watchdog/meson_wdt.c
> > index 304274c67735..cd0275a6cdac 100644
> > --- a/drivers/watchdog/meson_wdt.c
> > +++ b/drivers/watchdog/meson_wdt.c
> > @@ -36,7 +36,7 @@
> >  #define MESON_SEC_TO_TC(s, c)	((s) * (c))
> >  
> >  static bool nowayout = WATCHDOG_NOWAYOUT;
> > -static unsigned int timeout = MESON_WDT_TIMEOUT;
> > +static unsigned int timeout;
> >  
> >  struct meson_wdt_data {
> >  	unsigned int enable;
> > -- 
> > 2.15.1
> > 

-- 
Alexandre Belloni, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
http://bootlin.com

WARNING: multiple messages have this Message-ID (diff)
From: alexandre.belloni@free-electrons.com (Alexandre Belloni)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 6/7] watchdog: meson: allow setting timeout in devicetree
Date: Sat, 10 Feb 2018 00:19:10 +0100	[thread overview]
Message-ID: <20180209231910.GA2251@piout.net> (raw)
In-Reply-To: <20180209224849.GH19627@roeck-us.net>

Hi Guenter,

On 09/02/2018 at 14:48:49 -0800, Guenter Roeck wrote:
> On Fri, Feb 09, 2018 at 08:27:23PM +0100, Marcus Folkesson wrote:
> > watchdog_init_timeout() will allways pick timeout_param since it
> > defaults to a valid timeout.
> > 
> > By following best practice described in
> > Documentation/watchdog/watchdog-kernel-api.txt, it also
> > let us to set timout-sec property in devicetree.
> > 
> > Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
> 
> Reviewed-by: Guenetr Roeck <linux@roeck-us.net>
                  ^
A small typo in your name


> > ---
> >  Documentation/devicetree/bindings/watchdog/meson-wdt.txt | 4 ++++
> >  drivers/watchdog/meson_wdt.c                             | 2 +-
> >  2 files changed, 5 insertions(+), 1 deletion(-)
> > 
> > diff --git a/Documentation/devicetree/bindings/watchdog/meson-wdt.txt b/Documentation/devicetree/bindings/watchdog/meson-wdt.txt
> > index 8a6d84cb36c9..7588cc3971bf 100644
> > --- a/Documentation/devicetree/bindings/watchdog/meson-wdt.txt
> > +++ b/Documentation/devicetree/bindings/watchdog/meson-wdt.txt
> > @@ -9,9 +9,13 @@ Required properties:
> >  	"amlogic,meson8m2-wdt" and "amlogic,meson8b-wdt" on Meson8m2 SoCs
> >  - reg : Specifies base physical address and size of the registers.
> >  
> > +Optional properties:
> > +- timeout-sec: contains the watchdog timeout in seconds.
> > +
> >  Example:
> >  
> >  wdt: watchdog at c1109900 {
> >  	compatible = "amlogic,meson6-wdt";
> >  	reg = <0xc1109900 0x8>;
> > +	timeout-sec = <10>;
> >  };
> > diff --git a/drivers/watchdog/meson_wdt.c b/drivers/watchdog/meson_wdt.c
> > index 304274c67735..cd0275a6cdac 100644
> > --- a/drivers/watchdog/meson_wdt.c
> > +++ b/drivers/watchdog/meson_wdt.c
> > @@ -36,7 +36,7 @@
> >  #define MESON_SEC_TO_TC(s, c)	((s) * (c))
> >  
> >  static bool nowayout = WATCHDOG_NOWAYOUT;
> > -static unsigned int timeout = MESON_WDT_TIMEOUT;
> > +static unsigned int timeout;
> >  
> >  struct meson_wdt_data {
> >  	unsigned int enable;
> > -- 
> > 2.15.1
> > 

-- 
Alexandre Belloni, Bootlin (formerly Free Electrons)
Embedded Linux and Kernel engineering
http://bootlin.com

  reply	other threads:[~2018-02-09 23:19 UTC|newest]

Thread overview: 88+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <marcus.folkesson@gmail.com>
2012-05-10 17:52 ` [PATCH] ARM: davinci: turn off DDR PHY when entering deep sleep Marcus Folkesson
2012-05-10 17:52   ` Marcus Folkesson
2012-05-21 17:38   ` Sekhar Nori
2012-05-21 17:38     ` Sekhar Nori
2012-05-24 11:46     ` Marcus Folkesson
2012-05-24 11:46       ` Marcus Folkesson
2012-05-24 17:41       ` Sekhar Nori
2012-05-24 17:41         ` Sekhar Nori
2018-02-09 19:27 ` [PATCH 0/7] watchdog: make use of timeout-secs Marcus Folkesson
2018-02-09 19:27   ` Marcus Folkesson
2018-02-09 19:27   ` Marcus Folkesson
2018-02-09 19:27   ` Marcus Folkesson
2018-02-09 19:27   ` [PATCH 1/7] watchdog: sama5d4: make use of timeout-secs provided in devicetree Marcus Folkesson
2018-02-09 19:27     ` Marcus Folkesson
2018-02-09 19:27     ` Marcus Folkesson
2018-02-09 19:32     ` Marcus Folkesson
2018-02-09 19:32       ` Marcus Folkesson
2018-02-09 19:32       ` Marcus Folkesson
2018-02-09 19:32       ` Marcus Folkesson
2018-02-09 22:38     ` Guenter Roeck
2018-02-09 22:38       ` Guenter Roeck
2018-02-09 22:38       ` Guenter Roeck
2018-02-09 22:38       ` Guenter Roeck
2018-02-11 17:38     ` [1/7] " Guenter Roeck
2018-02-11 17:38       ` Guenter Roeck
2018-02-11 17:38       ` Guenter Roeck
2018-02-11 17:38       ` Guenter Roeck
2018-02-09 19:27   ` [PATCH 2/7] watchdog: sunxi: allow setting timeout " Marcus Folkesson
2018-02-09 19:27     ` Marcus Folkesson
2018-02-09 19:27     ` Marcus Folkesson
2018-02-09 19:27     ` Marcus Folkesson
2018-02-09 22:39     ` Guenter Roeck
2018-02-09 22:39       ` Guenter Roeck
2018-02-09 22:39       ` Guenter Roeck
2018-02-09 22:39       ` Guenter Roeck
2018-02-09 19:27   ` [PATCH 3/7] watchdog: sirfsoc: " Marcus Folkesson
2018-02-09 19:27     ` Marcus Folkesson
2018-02-09 19:27     ` Marcus Folkesson
2018-02-09 19:27     ` Marcus Folkesson
2018-02-09 22:40     ` Guenter Roeck
2018-02-09 22:40       ` Guenter Roeck
2018-02-09 22:40       ` Guenter Roeck
2018-02-09 19:27   ` [PATCH 4/7] watchdog: pnx4008: make use of timeout-secs provided " Marcus Folkesson
2018-02-09 19:27     ` Marcus Folkesson
2018-02-09 19:27     ` Marcus Folkesson
2018-02-09 19:27     ` Marcus Folkesson
2018-02-09 22:41     ` Guenter Roeck
2018-02-09 22:41       ` Guenter Roeck
2018-02-09 22:41       ` Guenter Roeck
2018-02-09 22:41       ` Guenter Roeck
2018-02-09 22:43     ` Guenter Roeck
2018-02-09 22:43       ` Guenter Roeck
2018-02-09 22:43       ` Guenter Roeck
2018-02-09 22:43       ` Guenter Roeck
2018-02-09 19:27   ` [PATCH 5/7] watchdog: mtk: allow setting timeout " Marcus Folkesson
2018-02-09 19:27     ` Marcus Folkesson
2018-02-09 19:27     ` Marcus Folkesson
2018-02-09 19:27     ` Marcus Folkesson
2018-02-09 22:43     ` Guenter Roeck
2018-02-09 22:43       ` Guenter Roeck
2018-02-09 22:43       ` Guenter Roeck
2018-02-09 22:43       ` Guenter Roeck
2018-02-09 19:27   ` [PATCH 6/7] watchdog: meson: " Marcus Folkesson
2018-02-09 19:27     ` Marcus Folkesson
2018-02-09 19:27     ` Marcus Folkesson
2018-02-09 22:48     ` Guenter Roeck
2018-02-09 22:48       ` Guenter Roeck
2018-02-09 22:48       ` Guenter Roeck
2018-02-09 22:48       ` Guenter Roeck
2018-02-09 23:19       ` Alexandre Belloni [this message]
2018-02-09 23:19         ` Alexandre Belloni
2018-02-09 23:19         ` Alexandre Belloni
2018-02-10  0:04         ` Guenter Roeck
2018-02-10  0:04           ` Guenter Roeck
2018-02-10  0:04           ` Guenter Roeck
2018-02-10  0:04           ` Guenter Roeck
2018-02-09 19:27   ` [PATCH 7/7] watchdog: coh901327: make use of timeout-secs provided " Marcus Folkesson
2018-02-09 19:27     ` Marcus Folkesson
2018-02-09 19:27     ` Marcus Folkesson
2018-02-09 19:27     ` Marcus Folkesson
2018-02-09 22:52     ` Guenter Roeck
2018-02-09 22:52       ` Guenter Roeck
2018-02-09 22:52       ` Guenter Roeck
2018-02-09 22:52       ` Guenter Roeck
2018-02-10  8:54       ` Marcus Folkesson
2018-02-10  8:54         ` Marcus Folkesson
2018-02-10  8:54         ` Marcus Folkesson
2018-02-10  8:54         ` Marcus Folkesson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180209231910.GA2251@piout.net \
    --to=alexandre.belloni@free-electrons.com \
    --cc=linus-amlogic@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.