All of lore.kernel.org
 help / color / mirror / Atom feed
From: marcus.folkesson@gmail.com (Marcus Folkesson)
To: linus-amlogic@lists.infradead.org
Subject: [PATCH 7/7] watchdog: coh901327: make use of timeout-secs provided in devicetree
Date: Sat, 10 Feb 2018 09:54:06 +0100	[thread overview]
Message-ID: <20180210085406.GA744@gmail.com> (raw)
In-Reply-To: <20180209225200.GI19627@roeck-us.net>

Hi,

On Fri, Feb 09, 2018 at 02:52:00PM -0800, Guenter Roeck wrote:
> On Fri, Feb 09, 2018 at 08:27:24PM +0100, Marcus Folkesson wrote:
> > watchdog_init_timeout() will allways pick timeout_param since it
> > defaults to a valid timeout.
> > 
> > Following best practice described in
> > Documentation/watchdog/watchdog-kernel-api.txt to make use of
> > the parameter logic.
> > 
> > Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
> > ---
> >  drivers/watchdog/coh901327_wdt.c | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/drivers/watchdog/coh901327_wdt.c b/drivers/watchdog/coh901327_wdt.c
> > index 4410337f4f7f..437f865e5c6b 100644
> > --- a/drivers/watchdog/coh901327_wdt.c
> > +++ b/drivers/watchdog/coh901327_wdt.c
> > @@ -67,7 +67,7 @@
> >  #define U300_WDOG_IFR_WILL_BARK_IRQ_FORCE_ENABLE			0x0001U
> >  
> >  /* Default timeout in seconds = 1 minute */
> > -static unsigned int margin = 60;
> > +static unsigned int margin;
> >  static int irq;
> >  static void __iomem *virtbase;
> >  static struct device *parent;
> 
> I would suggest to initialize .timeout in 'static struct watchdog_device
> coh901327_wdt', and drop the error check when calling watchdog_init_timeout().

Will do, thank you.

> 
> Guenter


Best regards
Marcus Folkesson
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-amlogic/attachments/20180210/13b40f3d/attachment.sig>

WARNING: multiple messages have this Message-ID (diff)
From: Marcus Folkesson <marcus.folkesson-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
To: Guenter Roeck <linux-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>
Cc: Wim Van Sebroeck <wim-IQzOog9fTRqzQB+pC5nmwQ@public.gmane.org>,
	Rob Herring <robh+dt-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Mark Rutland <mark.rutland-5wv7dgnIgG8@public.gmane.org>,
	Carlo Caione <carlo-KA+7E9HrN00dnm+yROfE0A@public.gmane.org>,
	Kevin Hilman <khilman-rdvid1DuHRBWk0Htik3J/w@public.gmane.org>,
	Matthias Brugger
	<matthias.bgg-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Barry Song <baohua-DgEjT+Ai2ygdnm+yROfE0A@public.gmane.org>,
	Maxime Ripard
	<maxime.ripard-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
	Chen-Yu Tsai <wens-jdAy2FN1RRM@public.gmane.org>,
	Linus Walleij
	<linus.walleij-QSEj5FYQhm4dnm+yROfE0A@public.gmane.org>,
	Vladimir Zapolskiy <vz-ChpfBGZJDbMAvxtiuMwx3w@public.gmane.org>,
	Sylvain Lemieux
	<slemieux.tyco-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>,
	Nicolas Ferre
	<nicolas.ferre-UWL1GkI3JZL3oGB3hsPCZA@public.gmane.org>,
	Alexandre Belloni
	<alexandre.belloni-wi1+55ScJUtKEb57/3fJTNBPR1lH4CV8@public.gmane.org>,
	linux-watchdog-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	devicetree-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-arm-kernel-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-amlogic-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org,
	linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org,
	linux-mediatek-IAPFreCvJWM7uuMidbF8XUB+6BGkLq7r@public.gmane.org
Subject: Re: [PATCH 7/7] watchdog: coh901327: make use of timeout-secs provided in devicetree
Date: Sat, 10 Feb 2018 09:54:06 +0100	[thread overview]
Message-ID: <20180210085406.GA744@gmail.com> (raw)
In-Reply-To: <20180209225200.GI19627-0h96xk9xTtrk1uMJSBkQmQ@public.gmane.org>

[-- Attachment #1: Type: text/plain, Size: 1370 bytes --]

Hi,

On Fri, Feb 09, 2018 at 02:52:00PM -0800, Guenter Roeck wrote:
> On Fri, Feb 09, 2018 at 08:27:24PM +0100, Marcus Folkesson wrote:
> > watchdog_init_timeout() will allways pick timeout_param since it
> > defaults to a valid timeout.
> > 
> > Following best practice described in
> > Documentation/watchdog/watchdog-kernel-api.txt to make use of
> > the parameter logic.
> > 
> > Signed-off-by: Marcus Folkesson <marcus.folkesson-Re5JQEeQqe8AvxtiuMwx3w@public.gmane.org>
> > ---
> >  drivers/watchdog/coh901327_wdt.c | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/drivers/watchdog/coh901327_wdt.c b/drivers/watchdog/coh901327_wdt.c
> > index 4410337f4f7f..437f865e5c6b 100644
> > --- a/drivers/watchdog/coh901327_wdt.c
> > +++ b/drivers/watchdog/coh901327_wdt.c
> > @@ -67,7 +67,7 @@
> >  #define U300_WDOG_IFR_WILL_BARK_IRQ_FORCE_ENABLE			0x0001U
> >  
> >  /* Default timeout in seconds = 1 minute */
> > -static unsigned int margin = 60;
> > +static unsigned int margin;
> >  static int irq;
> >  static void __iomem *virtbase;
> >  static struct device *parent;
> 
> I would suggest to initialize .timeout in 'static struct watchdog_device
> coh901327_wdt', and drop the error check when calling watchdog_init_timeout().

Will do, thank you.

> 
> Guenter


Best regards
Marcus Folkesson

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

WARNING: multiple messages have this Message-ID (diff)
From: Marcus Folkesson <marcus.folkesson@gmail.com>
To: Guenter Roeck <linux@roeck-us.net>
Cc: Wim Van Sebroeck <wim@iguana.be>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Carlo Caione <carlo@caione.org>,
	Kevin Hilman <khilman@baylibre.com>,
	Matthias Brugger <matthias.bgg@gmail.com>,
	Barry Song <baohua@kernel.org>,
	Maxime Ripard <maxime.ripard@free-electrons.com>,
	Chen-Yu Tsai <wens@csie.org>,
	Linus Walleij <linus.walleij@linaro.org>,
	Vladimir Zapolskiy <vz@mleia.com>,
	Sylvain Lemieux <slemieux.tyco@gmail.com>,
	Nicolas Ferre <nicolas.ferre@microchip.com>,
	Alexandre Belloni <alexandre.belloni@free-electrons.com>,
	linux-watchdog@vger.kernel.org, devicetree@vger.kernel.org,
	linux-arm-kernel@lists.infradead.org,
	linux-amlogic@lists.infradead.org, linux-kernel@vger.kernel.org,
	linux-mediatek@lists.infradead.org
Subject: Re: [PATCH 7/7] watchdog: coh901327: make use of timeout-secs provided in devicetree
Date: Sat, 10 Feb 2018 09:54:06 +0100	[thread overview]
Message-ID: <20180210085406.GA744@gmail.com> (raw)
In-Reply-To: <20180209225200.GI19627@roeck-us.net>

[-- Attachment #1: Type: text/plain, Size: 1340 bytes --]

Hi,

On Fri, Feb 09, 2018 at 02:52:00PM -0800, Guenter Roeck wrote:
> On Fri, Feb 09, 2018 at 08:27:24PM +0100, Marcus Folkesson wrote:
> > watchdog_init_timeout() will allways pick timeout_param since it
> > defaults to a valid timeout.
> > 
> > Following best practice described in
> > Documentation/watchdog/watchdog-kernel-api.txt to make use of
> > the parameter logic.
> > 
> > Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
> > ---
> >  drivers/watchdog/coh901327_wdt.c | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/drivers/watchdog/coh901327_wdt.c b/drivers/watchdog/coh901327_wdt.c
> > index 4410337f4f7f..437f865e5c6b 100644
> > --- a/drivers/watchdog/coh901327_wdt.c
> > +++ b/drivers/watchdog/coh901327_wdt.c
> > @@ -67,7 +67,7 @@
> >  #define U300_WDOG_IFR_WILL_BARK_IRQ_FORCE_ENABLE			0x0001U
> >  
> >  /* Default timeout in seconds = 1 minute */
> > -static unsigned int margin = 60;
> > +static unsigned int margin;
> >  static int irq;
> >  static void __iomem *virtbase;
> >  static struct device *parent;
> 
> I would suggest to initialize .timeout in 'static struct watchdog_device
> coh901327_wdt', and drop the error check when calling watchdog_init_timeout().

Will do, thank you.

> 
> Guenter


Best regards
Marcus Folkesson

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 833 bytes --]

WARNING: multiple messages have this Message-ID (diff)
From: marcus.folkesson@gmail.com (Marcus Folkesson)
To: linux-arm-kernel@lists.infradead.org
Subject: [PATCH 7/7] watchdog: coh901327: make use of timeout-secs provided in devicetree
Date: Sat, 10 Feb 2018 09:54:06 +0100	[thread overview]
Message-ID: <20180210085406.GA744@gmail.com> (raw)
In-Reply-To: <20180209225200.GI19627@roeck-us.net>

Hi,

On Fri, Feb 09, 2018 at 02:52:00PM -0800, Guenter Roeck wrote:
> On Fri, Feb 09, 2018 at 08:27:24PM +0100, Marcus Folkesson wrote:
> > watchdog_init_timeout() will allways pick timeout_param since it
> > defaults to a valid timeout.
> > 
> > Following best practice described in
> > Documentation/watchdog/watchdog-kernel-api.txt to make use of
> > the parameter logic.
> > 
> > Signed-off-by: Marcus Folkesson <marcus.folkesson@gmail.com>
> > ---
> >  drivers/watchdog/coh901327_wdt.c | 2 +-
> >  1 file changed, 1 insertion(+), 1 deletion(-)
> > 
> > diff --git a/drivers/watchdog/coh901327_wdt.c b/drivers/watchdog/coh901327_wdt.c
> > index 4410337f4f7f..437f865e5c6b 100644
> > --- a/drivers/watchdog/coh901327_wdt.c
> > +++ b/drivers/watchdog/coh901327_wdt.c
> > @@ -67,7 +67,7 @@
> >  #define U300_WDOG_IFR_WILL_BARK_IRQ_FORCE_ENABLE			0x0001U
> >  
> >  /* Default timeout in seconds = 1 minute */
> > -static unsigned int margin = 60;
> > +static unsigned int margin;
> >  static int irq;
> >  static void __iomem *virtbase;
> >  static struct device *parent;
> 
> I would suggest to initialize .timeout in 'static struct watchdog_device
> coh901327_wdt', and drop the error check when calling watchdog_init_timeout().

Will do, thank you.

> 
> Guenter


Best regards
Marcus Folkesson
-------------- next part --------------
A non-text attachment was scrubbed...
Name: signature.asc
Type: application/pgp-signature
Size: 833 bytes
Desc: not available
URL: <http://lists.infradead.org/pipermail/linux-arm-kernel/attachments/20180210/13b40f3d/attachment.sig>

  reply	other threads:[~2018-02-10  8:54 UTC|newest]

Thread overview: 88+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
     [not found] <marcus.folkesson@gmail.com>
2012-05-10 17:52 ` [PATCH] ARM: davinci: turn off DDR PHY when entering deep sleep Marcus Folkesson
2012-05-10 17:52   ` Marcus Folkesson
2012-05-21 17:38   ` Sekhar Nori
2012-05-21 17:38     ` Sekhar Nori
2012-05-24 11:46     ` Marcus Folkesson
2012-05-24 11:46       ` Marcus Folkesson
2012-05-24 17:41       ` Sekhar Nori
2012-05-24 17:41         ` Sekhar Nori
2018-02-09 19:27 ` [PATCH 0/7] watchdog: make use of timeout-secs Marcus Folkesson
2018-02-09 19:27   ` Marcus Folkesson
2018-02-09 19:27   ` Marcus Folkesson
2018-02-09 19:27   ` Marcus Folkesson
2018-02-09 19:27   ` [PATCH 1/7] watchdog: sama5d4: make use of timeout-secs provided in devicetree Marcus Folkesson
2018-02-09 19:27     ` Marcus Folkesson
2018-02-09 19:27     ` Marcus Folkesson
2018-02-09 19:32     ` Marcus Folkesson
2018-02-09 19:32       ` Marcus Folkesson
2018-02-09 19:32       ` Marcus Folkesson
2018-02-09 19:32       ` Marcus Folkesson
2018-02-09 22:38     ` Guenter Roeck
2018-02-09 22:38       ` Guenter Roeck
2018-02-09 22:38       ` Guenter Roeck
2018-02-09 22:38       ` Guenter Roeck
2018-02-11 17:38     ` [1/7] " Guenter Roeck
2018-02-11 17:38       ` Guenter Roeck
2018-02-11 17:38       ` Guenter Roeck
2018-02-11 17:38       ` Guenter Roeck
2018-02-09 19:27   ` [PATCH 2/7] watchdog: sunxi: allow setting timeout " Marcus Folkesson
2018-02-09 19:27     ` Marcus Folkesson
2018-02-09 19:27     ` Marcus Folkesson
2018-02-09 19:27     ` Marcus Folkesson
2018-02-09 22:39     ` Guenter Roeck
2018-02-09 22:39       ` Guenter Roeck
2018-02-09 22:39       ` Guenter Roeck
2018-02-09 22:39       ` Guenter Roeck
2018-02-09 19:27   ` [PATCH 3/7] watchdog: sirfsoc: " Marcus Folkesson
2018-02-09 19:27     ` Marcus Folkesson
2018-02-09 19:27     ` Marcus Folkesson
2018-02-09 19:27     ` Marcus Folkesson
2018-02-09 22:40     ` Guenter Roeck
2018-02-09 22:40       ` Guenter Roeck
2018-02-09 22:40       ` Guenter Roeck
2018-02-09 19:27   ` [PATCH 4/7] watchdog: pnx4008: make use of timeout-secs provided " Marcus Folkesson
2018-02-09 19:27     ` Marcus Folkesson
2018-02-09 19:27     ` Marcus Folkesson
2018-02-09 19:27     ` Marcus Folkesson
2018-02-09 22:41     ` Guenter Roeck
2018-02-09 22:41       ` Guenter Roeck
2018-02-09 22:41       ` Guenter Roeck
2018-02-09 22:41       ` Guenter Roeck
2018-02-09 22:43     ` Guenter Roeck
2018-02-09 22:43       ` Guenter Roeck
2018-02-09 22:43       ` Guenter Roeck
2018-02-09 22:43       ` Guenter Roeck
2018-02-09 19:27   ` [PATCH 5/7] watchdog: mtk: allow setting timeout " Marcus Folkesson
2018-02-09 19:27     ` Marcus Folkesson
2018-02-09 19:27     ` Marcus Folkesson
2018-02-09 19:27     ` Marcus Folkesson
2018-02-09 22:43     ` Guenter Roeck
2018-02-09 22:43       ` Guenter Roeck
2018-02-09 22:43       ` Guenter Roeck
2018-02-09 22:43       ` Guenter Roeck
2018-02-09 19:27   ` [PATCH 6/7] watchdog: meson: " Marcus Folkesson
2018-02-09 19:27     ` Marcus Folkesson
2018-02-09 19:27     ` Marcus Folkesson
2018-02-09 22:48     ` Guenter Roeck
2018-02-09 22:48       ` Guenter Roeck
2018-02-09 22:48       ` Guenter Roeck
2018-02-09 22:48       ` Guenter Roeck
2018-02-09 23:19       ` Alexandre Belloni
2018-02-09 23:19         ` Alexandre Belloni
2018-02-09 23:19         ` Alexandre Belloni
2018-02-10  0:04         ` Guenter Roeck
2018-02-10  0:04           ` Guenter Roeck
2018-02-10  0:04           ` Guenter Roeck
2018-02-10  0:04           ` Guenter Roeck
2018-02-09 19:27   ` [PATCH 7/7] watchdog: coh901327: make use of timeout-secs provided " Marcus Folkesson
2018-02-09 19:27     ` Marcus Folkesson
2018-02-09 19:27     ` Marcus Folkesson
2018-02-09 19:27     ` Marcus Folkesson
2018-02-09 22:52     ` Guenter Roeck
2018-02-09 22:52       ` Guenter Roeck
2018-02-09 22:52       ` Guenter Roeck
2018-02-09 22:52       ` Guenter Roeck
2018-02-10  8:54       ` Marcus Folkesson [this message]
2018-02-10  8:54         ` Marcus Folkesson
2018-02-10  8:54         ` Marcus Folkesson
2018-02-10  8:54         ` Marcus Folkesson

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20180210085406.GA744@gmail.com \
    --to=marcus.folkesson@gmail.com \
    --cc=linus-amlogic@lists.infradead.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.