From: JC Kuo <jckuo@nvidia.com>
To: gregkh@linuxfoundation.org, thierry.reding@gmail.com,
jonathanh@nvidia.com
Cc: linux-tegra@vger.kernel.org, linux-usb@vger.kernel.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
nkristam@nvidia.com, skomatineni@nvidia.com,
JC Kuo <jckuo@nvidia.com>
Subject: [PATCH v3 1/7] xhci: tegra: Parameterize mailbox register addresses
Date: Sat, 5 Oct 2019 00:29:00 +0800 [thread overview]
Message-ID: <20191004162906.4818-2-jckuo@nvidia.com> (raw)
In-Reply-To: <20191004162906.4818-1-jckuo@nvidia.com>
Tegra194 XUSB host controller has rearranged mailbox registers. This
commit makes mailbox registers address a part of "soc" data so that
xhci-tegra driver can be used for Tegra194.
Signed-off-by: JC Kuo <jckuo@nvidia.com>
---
Changes in v3: none
Changes in v2: none
drivers/usb/host/xhci-tegra.c | 58 +++++++++++++++++++++++++----------
1 file changed, 42 insertions(+), 16 deletions(-)
diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c
index 2ff7c911fbd0..add6b8fb40e1 100644
--- a/drivers/usb/host/xhci-tegra.c
+++ b/drivers/usb/host/xhci-tegra.c
@@ -42,19 +42,18 @@
#define XUSB_CFG_CSB_BASE_ADDR 0x800
/* FPCI mailbox registers */
-#define XUSB_CFG_ARU_MBOX_CMD 0x0e4
+/* XUSB_CFG_ARU_MBOX_CMD */
#define MBOX_DEST_FALC BIT(27)
#define MBOX_DEST_PME BIT(28)
#define MBOX_DEST_SMI BIT(29)
#define MBOX_DEST_XHCI BIT(30)
#define MBOX_INT_EN BIT(31)
-#define XUSB_CFG_ARU_MBOX_DATA_IN 0x0e8
+/* XUSB_CFG_ARU_MBOX_DATA_IN and XUSB_CFG_ARU_MBOX_DATA_OUT */
#define CMD_DATA_SHIFT 0
#define CMD_DATA_MASK 0xffffff
#define CMD_TYPE_SHIFT 24
#define CMD_TYPE_MASK 0xff
-#define XUSB_CFG_ARU_MBOX_DATA_OUT 0x0ec
-#define XUSB_CFG_ARU_MBOX_OWNER 0x0f0
+/* XUSB_CFG_ARU_MBOX_OWNER */
#define MBOX_OWNER_NONE 0
#define MBOX_OWNER_FW 1
#define MBOX_OWNER_SW 2
@@ -146,6 +145,13 @@ struct tegra_xusb_phy_type {
unsigned int num;
};
+struct tega_xusb_mbox_regs {
+ u16 cmd;
+ u16 data_in;
+ u16 data_out;
+ u16 owner;
+};
+
struct tegra_xusb_soc {
const char *firmware;
const char * const *supply_names;
@@ -160,6 +166,8 @@ struct tegra_xusb_soc {
} usb2, ulpi, hsic, usb3;
} ports;
+ struct tega_xusb_mbox_regs mbox;
+
bool scale_ss_clock;
bool has_ipfs;
};
@@ -395,15 +403,15 @@ static int tegra_xusb_mbox_send(struct tegra_xusb *tegra,
* ACK/NAK messages.
*/
if (!(msg->cmd == MBOX_CMD_ACK || msg->cmd == MBOX_CMD_NAK)) {
- value = fpci_readl(tegra, XUSB_CFG_ARU_MBOX_OWNER);
+ value = fpci_readl(tegra, tegra->soc->mbox.owner);
if (value != MBOX_OWNER_NONE) {
dev_err(tegra->dev, "mailbox is busy\n");
return -EBUSY;
}
- fpci_writel(tegra, MBOX_OWNER_SW, XUSB_CFG_ARU_MBOX_OWNER);
+ fpci_writel(tegra, MBOX_OWNER_SW, tegra->soc->mbox.owner);
- value = fpci_readl(tegra, XUSB_CFG_ARU_MBOX_OWNER);
+ value = fpci_readl(tegra, tegra->soc->mbox.owner);
if (value != MBOX_OWNER_SW) {
dev_err(tegra->dev, "failed to acquire mailbox\n");
return -EBUSY;
@@ -413,17 +421,17 @@ static int tegra_xusb_mbox_send(struct tegra_xusb *tegra,
}
value = tegra_xusb_mbox_pack(msg);
- fpci_writel(tegra, value, XUSB_CFG_ARU_MBOX_DATA_IN);
+ fpci_writel(tegra, value, tegra->soc->mbox.data_in);
- value = fpci_readl(tegra, XUSB_CFG_ARU_MBOX_CMD);
+ value = fpci_readl(tegra, tegra->soc->mbox.cmd);
value |= MBOX_INT_EN | MBOX_DEST_FALC;
- fpci_writel(tegra, value, XUSB_CFG_ARU_MBOX_CMD);
+ fpci_writel(tegra, value, tegra->soc->mbox.cmd);
if (wait_for_idle) {
unsigned long timeout = jiffies + msecs_to_jiffies(250);
while (time_before(jiffies, timeout)) {
- value = fpci_readl(tegra, XUSB_CFG_ARU_MBOX_OWNER);
+ value = fpci_readl(tegra, tegra->soc->mbox.owner);
if (value == MBOX_OWNER_NONE)
break;
@@ -431,7 +439,7 @@ static int tegra_xusb_mbox_send(struct tegra_xusb *tegra,
}
if (time_after(jiffies, timeout))
- value = fpci_readl(tegra, XUSB_CFG_ARU_MBOX_OWNER);
+ value = fpci_readl(tegra, tegra->soc->mbox.owner);
if (value != MBOX_OWNER_NONE)
return -ETIMEDOUT;
@@ -598,16 +606,16 @@ static irqreturn_t tegra_xusb_mbox_thread(int irq, void *data)
mutex_lock(&tegra->lock);
- value = fpci_readl(tegra, XUSB_CFG_ARU_MBOX_DATA_OUT);
+ value = fpci_readl(tegra, tegra->soc->mbox.data_out);
tegra_xusb_mbox_unpack(&msg, value);
- value = fpci_readl(tegra, XUSB_CFG_ARU_MBOX_CMD);
+ value = fpci_readl(tegra, tegra->soc->mbox.cmd);
value &= ~MBOX_DEST_SMI;
- fpci_writel(tegra, value, XUSB_CFG_ARU_MBOX_CMD);
+ fpci_writel(tegra, value, tegra->soc->mbox.cmd);
/* clear mailbox owner if no ACK/NAK is required */
if (!tegra_xusb_mbox_cmd_requires_ack(msg.cmd))
- fpci_writel(tegra, MBOX_OWNER_NONE, XUSB_CFG_ARU_MBOX_OWNER);
+ fpci_writel(tegra, MBOX_OWNER_NONE, tegra->soc->mbox.owner);
tegra_xusb_mbox_handle(tegra, &msg);
@@ -1375,6 +1383,12 @@ static const struct tegra_xusb_soc tegra124_soc = {
},
.scale_ss_clock = true,
.has_ipfs = true,
+ .mbox = {
+ .cmd = 0xe4,
+ .data_in = 0xe8,
+ .data_out = 0xec,
+ .owner = 0xf0,
+ },
};
MODULE_FIRMWARE("nvidia/tegra124/xusb.bin");
@@ -1407,6 +1421,12 @@ static const struct tegra_xusb_soc tegra210_soc = {
},
.scale_ss_clock = false,
.has_ipfs = true,
+ .mbox = {
+ .cmd = 0xe4,
+ .data_in = 0xe8,
+ .data_out = 0xec,
+ .owner = 0xf0,
+ },
};
MODULE_FIRMWARE("nvidia/tegra210/xusb.bin");
@@ -1432,6 +1452,12 @@ static const struct tegra_xusb_soc tegra186_soc = {
},
.scale_ss_clock = false,
.has_ipfs = false,
+ .mbox = {
+ .cmd = 0xe4,
+ .data_in = 0xe8,
+ .data_out = 0xec,
+ .owner = 0xf0,
+ },
};
static const struct of_device_id tegra_xusb_of_match[] = {
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: JC Kuo <jckuo@nvidia.com>
To: <gregkh@linuxfoundation.org>, <thierry.reding@gmail.com>,
<jonathanh@nvidia.com>
Cc: <linux-tegra@vger.kernel.org>, <linux-usb@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<nkristam@nvidia.com>, <skomatineni@nvidia.com>,
JC Kuo <jckuo@nvidia.com>
Subject: [PATCH v3 1/7] xhci: tegra: Parameterize mailbox register addresses
Date: Sat, 5 Oct 2019 00:29:00 +0800 [thread overview]
Message-ID: <20191004162906.4818-2-jckuo@nvidia.com> (raw)
In-Reply-To: <20191004162906.4818-1-jckuo@nvidia.com>
Tegra194 XUSB host controller has rearranged mailbox registers. This
commit makes mailbox registers address a part of "soc" data so that
xhci-tegra driver can be used for Tegra194.
Signed-off-by: JC Kuo <jckuo@nvidia.com>
---
Changes in v3: none
Changes in v2: none
drivers/usb/host/xhci-tegra.c | 58 +++++++++++++++++++++++++----------
1 file changed, 42 insertions(+), 16 deletions(-)
diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c
index 2ff7c911fbd0..add6b8fb40e1 100644
--- a/drivers/usb/host/xhci-tegra.c
+++ b/drivers/usb/host/xhci-tegra.c
@@ -42,19 +42,18 @@
#define XUSB_CFG_CSB_BASE_ADDR 0x800
/* FPCI mailbox registers */
-#define XUSB_CFG_ARU_MBOX_CMD 0x0e4
+/* XUSB_CFG_ARU_MBOX_CMD */
#define MBOX_DEST_FALC BIT(27)
#define MBOX_DEST_PME BIT(28)
#define MBOX_DEST_SMI BIT(29)
#define MBOX_DEST_XHCI BIT(30)
#define MBOX_INT_EN BIT(31)
-#define XUSB_CFG_ARU_MBOX_DATA_IN 0x0e8
+/* XUSB_CFG_ARU_MBOX_DATA_IN and XUSB_CFG_ARU_MBOX_DATA_OUT */
#define CMD_DATA_SHIFT 0
#define CMD_DATA_MASK 0xffffff
#define CMD_TYPE_SHIFT 24
#define CMD_TYPE_MASK 0xff
-#define XUSB_CFG_ARU_MBOX_DATA_OUT 0x0ec
-#define XUSB_CFG_ARU_MBOX_OWNER 0x0f0
+/* XUSB_CFG_ARU_MBOX_OWNER */
#define MBOX_OWNER_NONE 0
#define MBOX_OWNER_FW 1
#define MBOX_OWNER_SW 2
@@ -146,6 +145,13 @@ struct tegra_xusb_phy_type {
unsigned int num;
};
+struct tega_xusb_mbox_regs {
+ u16 cmd;
+ u16 data_in;
+ u16 data_out;
+ u16 owner;
+};
+
struct tegra_xusb_soc {
const char *firmware;
const char * const *supply_names;
@@ -160,6 +166,8 @@ struct tegra_xusb_soc {
} usb2, ulpi, hsic, usb3;
} ports;
+ struct tega_xusb_mbox_regs mbox;
+
bool scale_ss_clock;
bool has_ipfs;
};
@@ -395,15 +403,15 @@ static int tegra_xusb_mbox_send(struct tegra_xusb *tegra,
* ACK/NAK messages.
*/
if (!(msg->cmd == MBOX_CMD_ACK || msg->cmd == MBOX_CMD_NAK)) {
- value = fpci_readl(tegra, XUSB_CFG_ARU_MBOX_OWNER);
+ value = fpci_readl(tegra, tegra->soc->mbox.owner);
if (value != MBOX_OWNER_NONE) {
dev_err(tegra->dev, "mailbox is busy\n");
return -EBUSY;
}
- fpci_writel(tegra, MBOX_OWNER_SW, XUSB_CFG_ARU_MBOX_OWNER);
+ fpci_writel(tegra, MBOX_OWNER_SW, tegra->soc->mbox.owner);
- value = fpci_readl(tegra, XUSB_CFG_ARU_MBOX_OWNER);
+ value = fpci_readl(tegra, tegra->soc->mbox.owner);
if (value != MBOX_OWNER_SW) {
dev_err(tegra->dev, "failed to acquire mailbox\n");
return -EBUSY;
@@ -413,17 +421,17 @@ static int tegra_xusb_mbox_send(struct tegra_xusb *tegra,
}
value = tegra_xusb_mbox_pack(msg);
- fpci_writel(tegra, value, XUSB_CFG_ARU_MBOX_DATA_IN);
+ fpci_writel(tegra, value, tegra->soc->mbox.data_in);
- value = fpci_readl(tegra, XUSB_CFG_ARU_MBOX_CMD);
+ value = fpci_readl(tegra, tegra->soc->mbox.cmd);
value |= MBOX_INT_EN | MBOX_DEST_FALC;
- fpci_writel(tegra, value, XUSB_CFG_ARU_MBOX_CMD);
+ fpci_writel(tegra, value, tegra->soc->mbox.cmd);
if (wait_for_idle) {
unsigned long timeout = jiffies + msecs_to_jiffies(250);
while (time_before(jiffies, timeout)) {
- value = fpci_readl(tegra, XUSB_CFG_ARU_MBOX_OWNER);
+ value = fpci_readl(tegra, tegra->soc->mbox.owner);
if (value == MBOX_OWNER_NONE)
break;
@@ -431,7 +439,7 @@ static int tegra_xusb_mbox_send(struct tegra_xusb *tegra,
}
if (time_after(jiffies, timeout))
- value = fpci_readl(tegra, XUSB_CFG_ARU_MBOX_OWNER);
+ value = fpci_readl(tegra, tegra->soc->mbox.owner);
if (value != MBOX_OWNER_NONE)
return -ETIMEDOUT;
@@ -598,16 +606,16 @@ static irqreturn_t tegra_xusb_mbox_thread(int irq, void *data)
mutex_lock(&tegra->lock);
- value = fpci_readl(tegra, XUSB_CFG_ARU_MBOX_DATA_OUT);
+ value = fpci_readl(tegra, tegra->soc->mbox.data_out);
tegra_xusb_mbox_unpack(&msg, value);
- value = fpci_readl(tegra, XUSB_CFG_ARU_MBOX_CMD);
+ value = fpci_readl(tegra, tegra->soc->mbox.cmd);
value &= ~MBOX_DEST_SMI;
- fpci_writel(tegra, value, XUSB_CFG_ARU_MBOX_CMD);
+ fpci_writel(tegra, value, tegra->soc->mbox.cmd);
/* clear mailbox owner if no ACK/NAK is required */
if (!tegra_xusb_mbox_cmd_requires_ack(msg.cmd))
- fpci_writel(tegra, MBOX_OWNER_NONE, XUSB_CFG_ARU_MBOX_OWNER);
+ fpci_writel(tegra, MBOX_OWNER_NONE, tegra->soc->mbox.owner);
tegra_xusb_mbox_handle(tegra, &msg);
@@ -1375,6 +1383,12 @@ static const struct tegra_xusb_soc tegra124_soc = {
},
.scale_ss_clock = true,
.has_ipfs = true,
+ .mbox = {
+ .cmd = 0xe4,
+ .data_in = 0xe8,
+ .data_out = 0xec,
+ .owner = 0xf0,
+ },
};
MODULE_FIRMWARE("nvidia/tegra124/xusb.bin");
@@ -1407,6 +1421,12 @@ static const struct tegra_xusb_soc tegra210_soc = {
},
.scale_ss_clock = false,
.has_ipfs = true,
+ .mbox = {
+ .cmd = 0xe4,
+ .data_in = 0xe8,
+ .data_out = 0xec,
+ .owner = 0xf0,
+ },
};
MODULE_FIRMWARE("nvidia/tegra210/xusb.bin");
@@ -1432,6 +1452,12 @@ static const struct tegra_xusb_soc tegra186_soc = {
},
.scale_ss_clock = false,
.has_ipfs = false,
+ .mbox = {
+ .cmd = 0xe4,
+ .data_in = 0xe8,
+ .data_out = 0xec,
+ .owner = 0xf0,
+ },
};
static const struct of_device_id tegra_xusb_of_match[] = {
--
2.17.1
next prev parent reply other threads:[~2019-10-04 16:29 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-04 16:28 [PATCH v3 0/7] add Tegra194 XUSB host and pad controller support JC Kuo
2019-10-04 16:28 ` JC Kuo
2019-10-04 16:29 ` JC Kuo [this message]
2019-10-04 16:29 ` [PATCH v3 1/7] xhci: tegra: Parameterize mailbox register addresses JC Kuo
2019-10-04 16:29 ` [PATCH v3 2/7] usb: host: xhci-tegra: Add Tegra194 XHCI support JC Kuo
2019-10-04 16:29 ` JC Kuo
2019-10-04 16:29 ` [PATCH v3 3/7] phy: tegra: xusb: Protect Tegra186 soc with config JC Kuo
2019-10-04 16:29 ` JC Kuo
2019-10-04 16:29 ` [PATCH v3 4/7] phy: tegra: xusb: Add Tegra194 support JC Kuo
2019-10-04 16:29 ` JC Kuo
2019-10-04 16:29 ` [PATCH v3 5/7] dt-bindings: phy: tegra: " JC Kuo
2019-10-04 16:29 ` JC Kuo
2019-10-04 16:29 ` [PATCH v3 6/7] arm64: tegra: Add XUSB and pad controller on Tegra194 JC Kuo
2019-10-04 16:29 ` JC Kuo
2019-10-04 16:29 ` [PATCH v3 7/7] arm64: tegra: Enable XUSB host in P2972-0000 board JC Kuo
2019-10-04 16:29 ` JC Kuo
2019-10-07 11:03 ` [PATCH v3 0/7] add Tegra194 XUSB host and pad controller support Greg KH
2019-10-08 11:29 ` Thierry Reding
2019-10-09 2:23 ` JC Kuo
2019-10-09 2:23 ` JC Kuo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191004162906.4818-2-jckuo@nvidia.com \
--to=jckuo@nvidia.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jonathanh@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=nkristam@nvidia.com \
--cc=skomatineni@nvidia.com \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.