From: JC Kuo <jckuo@nvidia.com>
To: gregkh@linuxfoundation.org, thierry.reding@gmail.com,
jonathanh@nvidia.com
Cc: linux-tegra@vger.kernel.org, linux-usb@vger.kernel.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
nkristam@nvidia.com, skomatineni@nvidia.com,
JC Kuo <jckuo@nvidia.com>
Subject: [PATCH v3 2/7] usb: host: xhci-tegra: Add Tegra194 XHCI support
Date: Sat, 5 Oct 2019 00:29:01 +0800 [thread overview]
Message-ID: <20191004162906.4818-3-jckuo@nvidia.com> (raw)
In-Reply-To: <20191004162906.4818-1-jckuo@nvidia.com>
This commit adds Tegra194 XUSB host mode controller support. This is
very similar to the existing Tegra124/Tegra210/Tegra186 XHCI, except
1. the number of ports and PHYs differs
2. the IPFS wrapper being removed
3. mailbox registers address changes
Signed-off-by: JC Kuo <jckuo@nvidia.com>
---
Changes in v3: none
Changes in v2: none
drivers/usb/host/xhci-tegra.c | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c
index add6b8fb40e1..f19d39874a3b 100644
--- a/drivers/usb/host/xhci-tegra.c
+++ b/drivers/usb/host/xhci-tegra.c
@@ -1460,10 +1460,40 @@ static const struct tegra_xusb_soc tegra186_soc = {
},
};
+static const char * const tegra194_supply_names[] = {
+};
+
+static const struct tegra_xusb_phy_type tegra194_phy_types[] = {
+ { .name = "usb3", .num = 4, },
+ { .name = "usb2", .num = 4, },
+};
+
+static const struct tegra_xusb_soc tegra194_soc = {
+ .firmware = "nvidia/tegra194/xusb.bin",
+ .supply_names = tegra194_supply_names,
+ .num_supplies = ARRAY_SIZE(tegra194_supply_names),
+ .phy_types = tegra194_phy_types,
+ .num_types = ARRAY_SIZE(tegra194_phy_types),
+ .ports = {
+ .usb3 = { .offset = 0, .count = 4, },
+ .usb2 = { .offset = 4, .count = 4, },
+ },
+ .scale_ss_clock = false,
+ .has_ipfs = false,
+ .mbox = {
+ .cmd = 0x68,
+ .data_in = 0x6c,
+ .data_out = 0x70,
+ .owner = 0x74,
+ },
+};
+MODULE_FIRMWARE("nvidia/tegra194/xusb.bin");
+
static const struct of_device_id tegra_xusb_of_match[] = {
{ .compatible = "nvidia,tegra124-xusb", .data = &tegra124_soc },
{ .compatible = "nvidia,tegra210-xusb", .data = &tegra210_soc },
{ .compatible = "nvidia,tegra186-xusb", .data = &tegra186_soc },
+ { .compatible = "nvidia,tegra194-xusb", .data = &tegra194_soc },
{ },
};
MODULE_DEVICE_TABLE(of, tegra_xusb_of_match);
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: JC Kuo <jckuo@nvidia.com>
To: <gregkh@linuxfoundation.org>, <thierry.reding@gmail.com>,
<jonathanh@nvidia.com>
Cc: <linux-tegra@vger.kernel.org>, <linux-usb@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<nkristam@nvidia.com>, <skomatineni@nvidia.com>,
JC Kuo <jckuo@nvidia.com>
Subject: [PATCH v3 2/7] usb: host: xhci-tegra: Add Tegra194 XHCI support
Date: Sat, 5 Oct 2019 00:29:01 +0800 [thread overview]
Message-ID: <20191004162906.4818-3-jckuo@nvidia.com> (raw)
In-Reply-To: <20191004162906.4818-1-jckuo@nvidia.com>
This commit adds Tegra194 XUSB host mode controller support. This is
very similar to the existing Tegra124/Tegra210/Tegra186 XHCI, except
1. the number of ports and PHYs differs
2. the IPFS wrapper being removed
3. mailbox registers address changes
Signed-off-by: JC Kuo <jckuo@nvidia.com>
---
Changes in v3: none
Changes in v2: none
drivers/usb/host/xhci-tegra.c | 30 ++++++++++++++++++++++++++++++
1 file changed, 30 insertions(+)
diff --git a/drivers/usb/host/xhci-tegra.c b/drivers/usb/host/xhci-tegra.c
index add6b8fb40e1..f19d39874a3b 100644
--- a/drivers/usb/host/xhci-tegra.c
+++ b/drivers/usb/host/xhci-tegra.c
@@ -1460,10 +1460,40 @@ static const struct tegra_xusb_soc tegra186_soc = {
},
};
+static const char * const tegra194_supply_names[] = {
+};
+
+static const struct tegra_xusb_phy_type tegra194_phy_types[] = {
+ { .name = "usb3", .num = 4, },
+ { .name = "usb2", .num = 4, },
+};
+
+static const struct tegra_xusb_soc tegra194_soc = {
+ .firmware = "nvidia/tegra194/xusb.bin",
+ .supply_names = tegra194_supply_names,
+ .num_supplies = ARRAY_SIZE(tegra194_supply_names),
+ .phy_types = tegra194_phy_types,
+ .num_types = ARRAY_SIZE(tegra194_phy_types),
+ .ports = {
+ .usb3 = { .offset = 0, .count = 4, },
+ .usb2 = { .offset = 4, .count = 4, },
+ },
+ .scale_ss_clock = false,
+ .has_ipfs = false,
+ .mbox = {
+ .cmd = 0x68,
+ .data_in = 0x6c,
+ .data_out = 0x70,
+ .owner = 0x74,
+ },
+};
+MODULE_FIRMWARE("nvidia/tegra194/xusb.bin");
+
static const struct of_device_id tegra_xusb_of_match[] = {
{ .compatible = "nvidia,tegra124-xusb", .data = &tegra124_soc },
{ .compatible = "nvidia,tegra210-xusb", .data = &tegra210_soc },
{ .compatible = "nvidia,tegra186-xusb", .data = &tegra186_soc },
+ { .compatible = "nvidia,tegra194-xusb", .data = &tegra194_soc },
{ },
};
MODULE_DEVICE_TABLE(of, tegra_xusb_of_match);
--
2.17.1
next prev parent reply other threads:[~2019-10-04 16:29 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-04 16:28 [PATCH v3 0/7] add Tegra194 XUSB host and pad controller support JC Kuo
2019-10-04 16:28 ` JC Kuo
2019-10-04 16:29 ` [PATCH v3 1/7] xhci: tegra: Parameterize mailbox register addresses JC Kuo
2019-10-04 16:29 ` JC Kuo
2019-10-04 16:29 ` JC Kuo [this message]
2019-10-04 16:29 ` [PATCH v3 2/7] usb: host: xhci-tegra: Add Tegra194 XHCI support JC Kuo
2019-10-04 16:29 ` [PATCH v3 3/7] phy: tegra: xusb: Protect Tegra186 soc with config JC Kuo
2019-10-04 16:29 ` JC Kuo
2019-10-04 16:29 ` [PATCH v3 4/7] phy: tegra: xusb: Add Tegra194 support JC Kuo
2019-10-04 16:29 ` JC Kuo
2019-10-04 16:29 ` [PATCH v3 5/7] dt-bindings: phy: tegra: " JC Kuo
2019-10-04 16:29 ` JC Kuo
2019-10-04 16:29 ` [PATCH v3 6/7] arm64: tegra: Add XUSB and pad controller on Tegra194 JC Kuo
2019-10-04 16:29 ` JC Kuo
2019-10-04 16:29 ` [PATCH v3 7/7] arm64: tegra: Enable XUSB host in P2972-0000 board JC Kuo
2019-10-04 16:29 ` JC Kuo
2019-10-07 11:03 ` [PATCH v3 0/7] add Tegra194 XUSB host and pad controller support Greg KH
2019-10-08 11:29 ` Thierry Reding
2019-10-09 2:23 ` JC Kuo
2019-10-09 2:23 ` JC Kuo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191004162906.4818-3-jckuo@nvidia.com \
--to=jckuo@nvidia.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jonathanh@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=nkristam@nvidia.com \
--cc=skomatineni@nvidia.com \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.