From: JC Kuo <jckuo@nvidia.com>
To: gregkh@linuxfoundation.org, thierry.reding@gmail.com,
jonathanh@nvidia.com
Cc: linux-tegra@vger.kernel.org, linux-usb@vger.kernel.org,
linux-kernel@vger.kernel.org, devicetree@vger.kernel.org,
nkristam@nvidia.com, skomatineni@nvidia.com,
JC Kuo <jckuo@nvidia.com>
Subject: [PATCH v3 7/7] arm64: tegra: Enable XUSB host in P2972-0000 board
Date: Sat, 5 Oct 2019 00:29:06 +0800 [thread overview]
Message-ID: <20191004162906.4818-8-jckuo@nvidia.com> (raw)
In-Reply-To: <20191004162906.4818-1-jckuo@nvidia.com>
This commit enables XUSB host and pad controller in Tegra194
P2972-0000 board.
Signed-off-by: JC Kuo <jckuo@nvidia.com>
---
Changes in v3: none
Changes in v2:
- use capitalization of regulator names
- fix gpio property of VDD_5V_SATA regulator
.../arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 36 ++++++++++-
.../boot/dts/nvidia/tegra194-p2972-0000.dts | 62 +++++++++++++++++++
2 files changed, 97 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
index 4c38426a6969..e7d5e8a30f93 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
@@ -66,6 +66,29 @@
vmmc-supply = <&vdd_emmc_3v3>;
};
+ padctl@3520000 {
+ avdd-usb-supply = <&vdd_usb_3v3>;
+ vclamp-usb-supply = <&vdd_1v8ao>;
+
+ ports {
+ usb2-1 {
+ vbus-supply = <&vdd_5v0_sys>;
+ };
+
+ usb2-3 {
+ vbus-supply = <&vdd_5v_sata>;
+ };
+
+ usb3-0 {
+ vbus-supply = <&vdd_5v0_sys>;
+ };
+
+ usb3-3 {
+ vbus-supply = <&vdd_5v0_sys>;
+ };
+ };
+ };
+
rtc@c2a0000 {
status = "okay";
};
@@ -229,7 +252,7 @@
regulator-max-microvolt = <3300000>;
};
- ldo5 {
+ vdd_usb_3v3: ldo5 {
regulator-name = "VDD_USB_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -313,5 +336,16 @@
regulator-boot-on;
enable-active-low;
};
+
+ vdd_5v_sata: regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+
+ regulator-name = "VDD_5V_SATA";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 1) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
};
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
index d47cd8c4dd24..b60eef64c487 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
@@ -62,6 +62,68 @@
GPIO_ACTIVE_LOW>;
};
};
+ padctl@3520000 {
+ status = "okay";
+
+ pads {
+ usb2 {
+ lanes {
+ usb2-1 {
+ status = "okay";
+ };
+
+ usb2-3 {
+ status = "okay";
+ };
+ };
+ };
+
+ usb3 {
+ lanes {
+ usb3-0 {
+ status = "okay";
+ };
+
+ usb3-3 {
+ status = "okay";
+ };
+ };
+ };
+ };
+
+ ports {
+ usb2-1 {
+ mode = "host";
+ status = "okay";
+ };
+
+ usb2-3 {
+ mode = "host";
+ status = "okay";
+ };
+
+ usb3-0 {
+ nvidia,usb2-companion = <1>;
+ status = "okay";
+ };
+
+ usb3-3 {
+ nvidia,usb2-companion = <3>;
+ nvidia,disable-gen2;
+ status = "okay";
+ };
+ };
+ };
+
+ usb@3610000 {
+ status = "okay";
+
+ phys = <&{/cbb/padctl@3520000/pads/usb2/lanes/usb2-1}>,
+ <&{/cbb/padctl@3520000/pads/usb2/lanes/usb2-3}>,
+ <&{/cbb/padctl@3520000/pads/usb3/lanes/usb3-0}>,
+ <&{/cbb/padctl@3520000/pads/usb3/lanes/usb3-3}>;
+ phy-names = "usb2-1", "usb2-3", "usb3-0", "usb3-3";
+ };
};
pcie@14100000 {
--
2.17.1
WARNING: multiple messages have this Message-ID (diff)
From: JC Kuo <jckuo@nvidia.com>
To: <gregkh@linuxfoundation.org>, <thierry.reding@gmail.com>,
<jonathanh@nvidia.com>
Cc: <linux-tegra@vger.kernel.org>, <linux-usb@vger.kernel.org>,
<linux-kernel@vger.kernel.org>, <devicetree@vger.kernel.org>,
<nkristam@nvidia.com>, <skomatineni@nvidia.com>,
JC Kuo <jckuo@nvidia.com>
Subject: [PATCH v3 7/7] arm64: tegra: Enable XUSB host in P2972-0000 board
Date: Sat, 5 Oct 2019 00:29:06 +0800 [thread overview]
Message-ID: <20191004162906.4818-8-jckuo@nvidia.com> (raw)
In-Reply-To: <20191004162906.4818-1-jckuo@nvidia.com>
This commit enables XUSB host and pad controller in Tegra194
P2972-0000 board.
Signed-off-by: JC Kuo <jckuo@nvidia.com>
---
Changes in v3: none
Changes in v2:
- use capitalization of regulator names
- fix gpio property of VDD_5V_SATA regulator
.../arm64/boot/dts/nvidia/tegra194-p2888.dtsi | 36 ++++++++++-
.../boot/dts/nvidia/tegra194-p2972-0000.dts | 62 +++++++++++++++++++
2 files changed, 97 insertions(+), 1 deletion(-)
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
index 4c38426a6969..e7d5e8a30f93 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2888.dtsi
@@ -66,6 +66,29 @@
vmmc-supply = <&vdd_emmc_3v3>;
};
+ padctl@3520000 {
+ avdd-usb-supply = <&vdd_usb_3v3>;
+ vclamp-usb-supply = <&vdd_1v8ao>;
+
+ ports {
+ usb2-1 {
+ vbus-supply = <&vdd_5v0_sys>;
+ };
+
+ usb2-3 {
+ vbus-supply = <&vdd_5v_sata>;
+ };
+
+ usb3-0 {
+ vbus-supply = <&vdd_5v0_sys>;
+ };
+
+ usb3-3 {
+ vbus-supply = <&vdd_5v0_sys>;
+ };
+ };
+ };
+
rtc@c2a0000 {
status = "okay";
};
@@ -229,7 +252,7 @@
regulator-max-microvolt = <3300000>;
};
- ldo5 {
+ vdd_usb_3v3: ldo5 {
regulator-name = "VDD_USB_3V3";
regulator-min-microvolt = <3300000>;
regulator-max-microvolt = <3300000>;
@@ -313,5 +336,16 @@
regulator-boot-on;
enable-active-low;
};
+
+ vdd_5v_sata: regulator@4 {
+ compatible = "regulator-fixed";
+ reg = <4>;
+
+ regulator-name = "VDD_5V_SATA";
+ regulator-min-microvolt = <5000000>;
+ regulator-max-microvolt = <5000000>;
+ gpio = <&gpio TEGRA194_MAIN_GPIO(Z, 1) GPIO_ACTIVE_HIGH>;
+ enable-active-high;
+ };
};
};
diff --git a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
index d47cd8c4dd24..b60eef64c487 100644
--- a/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
+++ b/arch/arm64/boot/dts/nvidia/tegra194-p2972-0000.dts
@@ -62,6 +62,68 @@
GPIO_ACTIVE_LOW>;
};
};
+ padctl@3520000 {
+ status = "okay";
+
+ pads {
+ usb2 {
+ lanes {
+ usb2-1 {
+ status = "okay";
+ };
+
+ usb2-3 {
+ status = "okay";
+ };
+ };
+ };
+
+ usb3 {
+ lanes {
+ usb3-0 {
+ status = "okay";
+ };
+
+ usb3-3 {
+ status = "okay";
+ };
+ };
+ };
+ };
+
+ ports {
+ usb2-1 {
+ mode = "host";
+ status = "okay";
+ };
+
+ usb2-3 {
+ mode = "host";
+ status = "okay";
+ };
+
+ usb3-0 {
+ nvidia,usb2-companion = <1>;
+ status = "okay";
+ };
+
+ usb3-3 {
+ nvidia,usb2-companion = <3>;
+ nvidia,disable-gen2;
+ status = "okay";
+ };
+ };
+ };
+
+ usb@3610000 {
+ status = "okay";
+
+ phys = <&{/cbb/padctl@3520000/pads/usb2/lanes/usb2-1}>,
+ <&{/cbb/padctl@3520000/pads/usb2/lanes/usb2-3}>,
+ <&{/cbb/padctl@3520000/pads/usb3/lanes/usb3-0}>,
+ <&{/cbb/padctl@3520000/pads/usb3/lanes/usb3-3}>;
+ phy-names = "usb2-1", "usb2-3", "usb3-0", "usb3-3";
+ };
};
pcie@14100000 {
--
2.17.1
next prev parent reply other threads:[~2019-10-04 16:29 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-10-04 16:28 [PATCH v3 0/7] add Tegra194 XUSB host and pad controller support JC Kuo
2019-10-04 16:28 ` JC Kuo
2019-10-04 16:29 ` [PATCH v3 1/7] xhci: tegra: Parameterize mailbox register addresses JC Kuo
2019-10-04 16:29 ` JC Kuo
2019-10-04 16:29 ` [PATCH v3 2/7] usb: host: xhci-tegra: Add Tegra194 XHCI support JC Kuo
2019-10-04 16:29 ` JC Kuo
2019-10-04 16:29 ` [PATCH v3 3/7] phy: tegra: xusb: Protect Tegra186 soc with config JC Kuo
2019-10-04 16:29 ` JC Kuo
2019-10-04 16:29 ` [PATCH v3 4/7] phy: tegra: xusb: Add Tegra194 support JC Kuo
2019-10-04 16:29 ` JC Kuo
2019-10-04 16:29 ` [PATCH v3 5/7] dt-bindings: phy: tegra: " JC Kuo
2019-10-04 16:29 ` JC Kuo
2019-10-04 16:29 ` [PATCH v3 6/7] arm64: tegra: Add XUSB and pad controller on Tegra194 JC Kuo
2019-10-04 16:29 ` JC Kuo
2019-10-04 16:29 ` JC Kuo [this message]
2019-10-04 16:29 ` [PATCH v3 7/7] arm64: tegra: Enable XUSB host in P2972-0000 board JC Kuo
2019-10-07 11:03 ` [PATCH v3 0/7] add Tegra194 XUSB host and pad controller support Greg KH
2019-10-08 11:29 ` Thierry Reding
2019-10-09 2:23 ` JC Kuo
2019-10-09 2:23 ` JC Kuo
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191004162906.4818-8-jckuo@nvidia.com \
--to=jckuo@nvidia.com \
--cc=devicetree@vger.kernel.org \
--cc=gregkh@linuxfoundation.org \
--cc=jonathanh@nvidia.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-tegra@vger.kernel.org \
--cc=linux-usb@vger.kernel.org \
--cc=nkristam@nvidia.com \
--cc=skomatineni@nvidia.com \
--cc=thierry.reding@gmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.