From: Changming Huang <jerry.huang@nxp.com>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH 4/9] boot/arm-trusted-firmware: Add RCW support
Date: Wed, 20 Nov 2019 12:07:20 +0800 [thread overview]
Message-ID: <20191120040725.32207-5-jerry.huang@nxp.com> (raw)
In-Reply-To: <20191120040725.32207-1-jerry.huang@nxp.com>
NXP Layerscape platforms use RCW (Reset Configure Word) to
setup clocking and IO allocations and then launches the next stage of boot.
RCW needs ATF as well as uboot.
BR2_PACKAGE_HOST_RCW_BOOT_MODE is used to determine if ATF is used for RCW.
Signed-off-by: Changming Huang <jerry.huang@nxp.com>
---
boot/arm-trusted-firmware/arm-trusted-firmware.mk | 9 +++++++++
1 file changed, 9 insertions(+)
diff --git a/boot/arm-trusted-firmware/arm-trusted-firmware.mk b/boot/arm-trusted-firmware/arm-trusted-firmware.mk
index 70d36fff73..6896d9a7aa 100644
--- a/boot/arm-trusted-firmware/arm-trusted-firmware.mk
+++ b/boot/arm-trusted-firmware/arm-trusted-firmware.mk
@@ -95,6 +95,15 @@ endif
ARM_TRUSTED_FIRMWARE_MAKE_TARGETS = all
+RCW_BOOT_MODE = $(call qstrip,$(BR2_PACKAGE_HOST_RCW_BOOT_MODE))
+ifneq ($(RCW_BOOT_MODE),)
+RCW_PATH = $(call qstrip,$(BR2_PACKAGE_HOST_RCW_BIN))
+RCW_FILE = $(lastword $(subst /, ,$(RCW_PATH)))
+ARM_TRUSTED_FIRMWARE_MAKE_OPTS += BOOT_MODE=$(RCW_BOOT_MODE) RCW=$(BINARIES_DIR)/$(RCW_FILE)
+ARM_TRUSTED_FIRMWARE_MAKE_TARGETS += pbl
+ARM_TRUSTED_FIRMWARE_DEPENDENCIES += host-rcw
+endif
+
ifeq ($(BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP),y)
ARM_TRUSTED_FIRMWARE_MAKE_TARGETS += fip
ARM_TRUSTED_FIRMWARE_DEPENDENCIES += host-openssl
--
2.17.1
next prev parent reply other threads:[~2019-11-20 4:07 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-20 4:07 [Buildroot] [PATCH 0/9] new board ls1028ardb introduced Changming Huang
2019-11-20 4:07 ` [Buildroot] [PATCH 1/9] package/rcw: upgrade the rcw version to LSDK-19.09 Changming Huang
2019-11-20 7:59 ` Thomas Petazzoni
2019-11-20 8:04 ` [Buildroot] [EXT] " Jerry Huang
2019-11-20 9:21 ` [Buildroot] " Michael Walle
2019-11-20 9:32 ` Thomas Petazzoni
2019-11-20 9:38 ` Matthew Weber
2019-11-20 9:45 ` Thomas Petazzoni
2019-11-20 9:51 ` [Buildroot] [External] " Matthew Weber
2019-11-20 9:57 ` [Buildroot] [EXT] " Jerry Huang
2019-11-20 10:00 ` [Buildroot] " Michael Walle
2019-11-20 10:23 ` Matthew Weber
2019-11-20 9:54 ` [Buildroot] [EXT] " Jerry Huang
2019-11-20 4:07 ` [Buildroot] [PATCH 2/9] package/rcw: add target rcw binary support Changming Huang
2019-11-20 9:30 ` Matthew Weber
2019-11-20 4:07 ` [Buildroot] [PATCH 3/9] boot/arm-trusted-firmware: Add u-boot-dtb.bin support Changming Huang
2019-11-20 7:37 ` Sergey Matyukevich
2019-11-20 8:13 ` [Buildroot] [EXT] " Jerry Huang
2019-11-20 9:07 ` [Buildroot] " Thomas Petazzoni
2019-11-20 4:07 ` Changming Huang [this message]
2019-11-20 7:50 ` [Buildroot] [PATCH 4/9] boot/arm-trusted-firmware: Add RCW support Sergey Matyukevich
2019-11-20 8:45 ` [Buildroot] [EXT] " Jerry Huang
2019-11-21 8:02 ` Sergey Matyukevich
2019-11-21 8:37 ` Jerry Huang
2019-11-21 8:39 ` Jerry Huang
2019-11-20 4:07 ` [Buildroot] [PATCH 5/9] package/freescale-qoriq: new package directory Changming Huang
2019-11-20 8:57 ` Thomas Petazzoni
2019-11-20 4:07 ` [Buildroot] [PATCH 6/9] package/freescale-qoriq/cadence: new package Changming Huang
2019-11-20 9:13 ` Thomas Petazzoni
2019-11-20 9:30 ` [Buildroot] [EXT] " Jerry Huang
2019-11-20 9:36 ` Thomas Petazzoni
2019-11-20 9:47 ` Jerry Huang
2019-11-20 4:07 ` [Buildroot] [PATCH 7/9] package/rcw: Enable IIC5_PMUX and CLK_OUT_PMUX for GPIO Changming Huang
2019-11-20 9:14 ` Thomas Petazzoni
2019-11-20 9:34 ` [Buildroot] [EXT] " Jerry Huang
2019-11-20 9:38 ` Thomas Petazzoni
2019-11-20 10:22 ` Jerry Huang
2019-11-20 4:07 ` [Buildroot] [PATCH 8/9] board/freescale/common/ls: Add standard post image script for Layerscape processors Changming Huang
2019-11-20 4:07 ` [Buildroot] [PATCH 9/9] configs/freescale_ls1028ardb*: new board Changming Huang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191120040725.32207-5-jerry.huang@nxp.com \
--to=jerry.huang@nxp.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.