From: Thomas Petazzoni <thomas.petazzoni@bootlin.com>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH 7/9] package/rcw: Enable IIC5_PMUX and CLK_OUT_PMUX for GPIO
Date: Wed, 20 Nov 2019 10:14:51 +0100 [thread overview]
Message-ID: <20191120101451.34bd8120@windsurf.home> (raw)
In-Reply-To: <20191120040725.32207-8-jerry.huang@nxp.com>
On Wed, 20 Nov 2019 12:07:23 +0800
Changming Huang <jerry.huang@nxp.com> wrote:
> Because GPIO is used as interrupt for eNETC PHY and Micro-bus,
> IIC5_PMUX and CLK_OUT_PMUX are enabled for GPIO.
>
> Signed-off-by: Changming Huang <jerry.huang@nxp.com>
> ---
> ...5_PMUX-for-GPIO-function.patch.conditional | 42 +++++++++++++++++++
> ...T_PMUX-for-GPIO-function.patch.conditional | 40 ++++++++++++++++++
> package/rcw/rcw.mk | 7 ++++
> 3 files changed, 89 insertions(+)
> create mode 100644 package/rcw/0001-ls1028ardb-Enable-IIC5_PMUX-for-GPIO-function.patch.conditional
> create mode 100644 package/rcw/0002-ls1028ardb-Enable-CLK_OUT_PMUX-for-GPIO-function.patch.conditional
Sorry, but we really want to avoid conditional patches. Is there a
better solution than this ?
The patches modify only files in ls1028ardb/, and you apply them when
the board name is ls1028ardb, so basically, you could just as well
apply the patches unconditionally, no ?
> +ifeq ($(findstring ls1028ardb, $(BR2_TARGET_UBOOT_BOARDNAME)), ls1028ardb)
We really don't want to look at BR2_TARGET_UBOOT_BOARDNAME from package/rcw/.
Best regards,
Thomas
--
Thomas Petazzoni, CTO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com
next prev parent reply other threads:[~2019-11-20 9:14 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-20 4:07 [Buildroot] [PATCH 0/9] new board ls1028ardb introduced Changming Huang
2019-11-20 4:07 ` [Buildroot] [PATCH 1/9] package/rcw: upgrade the rcw version to LSDK-19.09 Changming Huang
2019-11-20 7:59 ` Thomas Petazzoni
2019-11-20 8:04 ` [Buildroot] [EXT] " Jerry Huang
2019-11-20 9:21 ` [Buildroot] " Michael Walle
2019-11-20 9:32 ` Thomas Petazzoni
2019-11-20 9:38 ` Matthew Weber
2019-11-20 9:45 ` Thomas Petazzoni
2019-11-20 9:51 ` [Buildroot] [External] " Matthew Weber
2019-11-20 9:57 ` [Buildroot] [EXT] " Jerry Huang
2019-11-20 10:00 ` [Buildroot] " Michael Walle
2019-11-20 10:23 ` Matthew Weber
2019-11-20 9:54 ` [Buildroot] [EXT] " Jerry Huang
2019-11-20 4:07 ` [Buildroot] [PATCH 2/9] package/rcw: add target rcw binary support Changming Huang
2019-11-20 9:30 ` Matthew Weber
2019-11-20 4:07 ` [Buildroot] [PATCH 3/9] boot/arm-trusted-firmware: Add u-boot-dtb.bin support Changming Huang
2019-11-20 7:37 ` Sergey Matyukevich
2019-11-20 8:13 ` [Buildroot] [EXT] " Jerry Huang
2019-11-20 9:07 ` [Buildroot] " Thomas Petazzoni
2019-11-20 4:07 ` [Buildroot] [PATCH 4/9] boot/arm-trusted-firmware: Add RCW support Changming Huang
2019-11-20 7:50 ` Sergey Matyukevich
2019-11-20 8:45 ` [Buildroot] [EXT] " Jerry Huang
2019-11-21 8:02 ` Sergey Matyukevich
2019-11-21 8:37 ` Jerry Huang
2019-11-21 8:39 ` Jerry Huang
2019-11-20 4:07 ` [Buildroot] [PATCH 5/9] package/freescale-qoriq: new package directory Changming Huang
2019-11-20 8:57 ` Thomas Petazzoni
2019-11-20 4:07 ` [Buildroot] [PATCH 6/9] package/freescale-qoriq/cadence: new package Changming Huang
2019-11-20 9:13 ` Thomas Petazzoni
2019-11-20 9:30 ` [Buildroot] [EXT] " Jerry Huang
2019-11-20 9:36 ` Thomas Petazzoni
2019-11-20 9:47 ` Jerry Huang
2019-11-20 4:07 ` [Buildroot] [PATCH 7/9] package/rcw: Enable IIC5_PMUX and CLK_OUT_PMUX for GPIO Changming Huang
2019-11-20 9:14 ` Thomas Petazzoni [this message]
2019-11-20 9:34 ` [Buildroot] [EXT] " Jerry Huang
2019-11-20 9:38 ` Thomas Petazzoni
2019-11-20 10:22 ` Jerry Huang
2019-11-20 4:07 ` [Buildroot] [PATCH 8/9] board/freescale/common/ls: Add standard post image script for Layerscape processors Changming Huang
2019-11-20 4:07 ` [Buildroot] [PATCH 9/9] configs/freescale_ls1028ardb*: new board Changming Huang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191120101451.34bd8120@windsurf.home \
--to=thomas.petazzoni@bootlin.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.