From: Sergey Matyukevich <geomatsi@gmail.com>
To: buildroot@busybox.net
Subject: [Buildroot] [PATCH 4/9] boot/arm-trusted-firmware: Add RCW support
Date: Wed, 20 Nov 2019 10:50:02 +0300 [thread overview]
Message-ID: <20191120075002.rgn3ymmedtux5dg4@bars> (raw)
In-Reply-To: <20191120040725.32207-5-jerry.huang@nxp.com>
> diff --git a/boot/arm-trusted-firmware/arm-trusted-firmware.mk b/boot/arm-trusted-firmware/arm-trusted-firmware.mk
> index 70d36fff73..6896d9a7aa 100644
> --- a/boot/arm-trusted-firmware/arm-trusted-firmware.mk
> +++ b/boot/arm-trusted-firmware/arm-trusted-firmware.mk
> @@ -95,6 +95,15 @@ endif
>
> ARM_TRUSTED_FIRMWARE_MAKE_TARGETS = all
>
> +RCW_BOOT_MODE = $(call qstrip,$(BR2_PACKAGE_HOST_RCW_BOOT_MODE))
> +ifneq ($(RCW_BOOT_MODE),)
> +RCW_PATH = $(call qstrip,$(BR2_PACKAGE_HOST_RCW_BIN))
> +RCW_FILE = $(lastword $(subst /, ,$(RCW_PATH)))
> +ARM_TRUSTED_FIRMWARE_MAKE_OPTS += BOOT_MODE=$(RCW_BOOT_MODE) RCW=$(BINARIES_DIR)/$(RCW_FILE)
> +ARM_TRUSTED_FIRMWARE_MAKE_TARGETS += pbl
> +ARM_TRUSTED_FIRMWARE_DEPENDENCIES += host-rcw
> +endif
> +
> ifeq ($(BR2_TARGET_ARM_TRUSTED_FIRMWARE_FIP),y)
> ARM_TRUSTED_FIRMWARE_MAKE_TARGETS += fip
> ARM_TRUSTED_FIRMWARE_DEPENDENCIES += host-openssl
Hi Jerry and all,
Here arm-trusted-firmware build is modified when some host package
with specific configuration is enabled in board config.
Shouldn't it be the other way around ? To be more specific: another
Config.in option for arm-trusted-firmware which pulls required build
time dependencies, e.g. see Marvell DDR options or FIP options.
Regards,
Sergey
next prev parent reply other threads:[~2019-11-20 7:50 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-11-20 4:07 [Buildroot] [PATCH 0/9] new board ls1028ardb introduced Changming Huang
2019-11-20 4:07 ` [Buildroot] [PATCH 1/9] package/rcw: upgrade the rcw version to LSDK-19.09 Changming Huang
2019-11-20 7:59 ` Thomas Petazzoni
2019-11-20 8:04 ` [Buildroot] [EXT] " Jerry Huang
2019-11-20 9:21 ` [Buildroot] " Michael Walle
2019-11-20 9:32 ` Thomas Petazzoni
2019-11-20 9:38 ` Matthew Weber
2019-11-20 9:45 ` Thomas Petazzoni
2019-11-20 9:51 ` [Buildroot] [External] " Matthew Weber
2019-11-20 9:57 ` [Buildroot] [EXT] " Jerry Huang
2019-11-20 10:00 ` [Buildroot] " Michael Walle
2019-11-20 10:23 ` Matthew Weber
2019-11-20 9:54 ` [Buildroot] [EXT] " Jerry Huang
2019-11-20 4:07 ` [Buildroot] [PATCH 2/9] package/rcw: add target rcw binary support Changming Huang
2019-11-20 9:30 ` Matthew Weber
2019-11-20 4:07 ` [Buildroot] [PATCH 3/9] boot/arm-trusted-firmware: Add u-boot-dtb.bin support Changming Huang
2019-11-20 7:37 ` Sergey Matyukevich
2019-11-20 8:13 ` [Buildroot] [EXT] " Jerry Huang
2019-11-20 9:07 ` [Buildroot] " Thomas Petazzoni
2019-11-20 4:07 ` [Buildroot] [PATCH 4/9] boot/arm-trusted-firmware: Add RCW support Changming Huang
2019-11-20 7:50 ` Sergey Matyukevich [this message]
2019-11-20 8:45 ` [Buildroot] [EXT] " Jerry Huang
2019-11-21 8:02 ` Sergey Matyukevich
2019-11-21 8:37 ` Jerry Huang
2019-11-21 8:39 ` Jerry Huang
2019-11-20 4:07 ` [Buildroot] [PATCH 5/9] package/freescale-qoriq: new package directory Changming Huang
2019-11-20 8:57 ` Thomas Petazzoni
2019-11-20 4:07 ` [Buildroot] [PATCH 6/9] package/freescale-qoriq/cadence: new package Changming Huang
2019-11-20 9:13 ` Thomas Petazzoni
2019-11-20 9:30 ` [Buildroot] [EXT] " Jerry Huang
2019-11-20 9:36 ` Thomas Petazzoni
2019-11-20 9:47 ` Jerry Huang
2019-11-20 4:07 ` [Buildroot] [PATCH 7/9] package/rcw: Enable IIC5_PMUX and CLK_OUT_PMUX for GPIO Changming Huang
2019-11-20 9:14 ` Thomas Petazzoni
2019-11-20 9:34 ` [Buildroot] [EXT] " Jerry Huang
2019-11-20 9:38 ` Thomas Petazzoni
2019-11-20 10:22 ` Jerry Huang
2019-11-20 4:07 ` [Buildroot] [PATCH 8/9] board/freescale/common/ls: Add standard post image script for Layerscape processors Changming Huang
2019-11-20 4:07 ` [Buildroot] [PATCH 9/9] configs/freescale_ls1028ardb*: new board Changming Huang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20191120075002.rgn3ymmedtux5dg4@bars \
--to=geomatsi@gmail.com \
--cc=buildroot@busybox.net \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.