From: Andrey Lebedev <andrey.lebedev@gmail.com>
To: Maxime Ripard <maxime@cerno.tech>
Cc: airlied@linux.ie, linux-kernel@vger.kernel.org,
dri-devel@lists.freedesktop.org, wens@csie.org, daniel@ffwll.ch,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 1/1] Support LVDS output on Allwinner A20
Date: Thu, 13 Feb 2020 00:46:53 +0200 [thread overview]
Message-ID: <20200212224653.GA19494@kedthinkpad> (raw)
In-Reply-To: <20200212125345.j6e3txfjqekuxh2s@gilmour.lan>
On Wed, Feb 12, 2020 at 01:53:45PM +0100, Maxime Ripard wrote:
> > > Side question, this will need some DT changes too, right?
> >
> > Hm, I agree. I think it would be reasonable to include LVDS0/1 pins
>
> That, but most importantly, the reset and clocks for the LVDS
> block. Also from looking at it, I'm not entirely sure that the TCON1
> has a LVDS output
I also have impression that LVDS is only supported on TCON0, but that's
mostly from this comment in sun4i_lvds.c:
/* The LVDS encoder can only work with the TCON channel 0 */
> do you have a board when you have been able to test it?
Yes, I have the hardware (Cubieboard 2) at hand, but I cannot change the
any physical connections on it. FWIW, it is https://openvario.org, the
device we are (painfully) trying to upgrade from old kernel-3.4 with
proprietary mali drivers to contemporary software.
> > and sample (but disabled) lvds panel,
>
> That's good for the sake of the example, but it shouldn't be in the
> same patch, it won't be merged.
I jave just submitted version 2 of the patches - set of 2 patches this
time. Addressed your comments, please take a look.
--
Andrey Lebedev aka -.- . -.. -.. . .-.
Software engineer
Homepage: http://lebedev.lt/
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Andrey Lebedev <andrey.lebedev@gmail.com>
To: Maxime Ripard <maxime@cerno.tech>
Cc: airlied@linux.ie, linux-kernel@vger.kernel.org,
dri-devel@lists.freedesktop.org, wens@csie.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 1/1] Support LVDS output on Allwinner A20
Date: Thu, 13 Feb 2020 00:46:53 +0200 [thread overview]
Message-ID: <20200212224653.GA19494@kedthinkpad> (raw)
In-Reply-To: <20200212125345.j6e3txfjqekuxh2s@gilmour.lan>
On Wed, Feb 12, 2020 at 01:53:45PM +0100, Maxime Ripard wrote:
> > > Side question, this will need some DT changes too, right?
> >
> > Hm, I agree. I think it would be reasonable to include LVDS0/1 pins
>
> That, but most importantly, the reset and clocks for the LVDS
> block. Also from looking at it, I'm not entirely sure that the TCON1
> has a LVDS output
I also have impression that LVDS is only supported on TCON0, but that's
mostly from this comment in sun4i_lvds.c:
/* The LVDS encoder can only work with the TCON channel 0 */
> do you have a board when you have been able to test it?
Yes, I have the hardware (Cubieboard 2) at hand, but I cannot change the
any physical connections on it. FWIW, it is https://openvario.org, the
device we are (painfully) trying to upgrade from old kernel-3.4 with
proprietary mali drivers to contemporary software.
> > and sample (but disabled) lvds panel,
>
> That's good for the sake of the example, but it shouldn't be in the
> same patch, it won't be merged.
I jave just submitted version 2 of the patches - set of 2 patches this
time. Addressed your comments, please take a look.
--
Andrey Lebedev aka -.- . -.. -.. . .-.
Software engineer
Homepage: http://lebedev.lt/
_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel
WARNING: multiple messages have this Message-ID (diff)
From: Andrey Lebedev <andrey.lebedev@gmail.com>
To: Maxime Ripard <maxime@cerno.tech>
Cc: wens@csie.org, airlied@linux.ie, daniel@ffwll.ch,
dri-devel@lists.freedesktop.org,
linux-arm-kernel@lists.infradead.org,
linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/1] Support LVDS output on Allwinner A20
Date: Thu, 13 Feb 2020 00:46:53 +0200 [thread overview]
Message-ID: <20200212224653.GA19494@kedthinkpad> (raw)
In-Reply-To: <20200212125345.j6e3txfjqekuxh2s@gilmour.lan>
On Wed, Feb 12, 2020 at 01:53:45PM +0100, Maxime Ripard wrote:
> > > Side question, this will need some DT changes too, right?
> >
> > Hm, I agree. I think it would be reasonable to include LVDS0/1 pins
>
> That, but most importantly, the reset and clocks for the LVDS
> block. Also from looking at it, I'm not entirely sure that the TCON1
> has a LVDS output
I also have impression that LVDS is only supported on TCON0, but that's
mostly from this comment in sun4i_lvds.c:
/* The LVDS encoder can only work with the TCON channel 0 */
> do you have a board when you have been able to test it?
Yes, I have the hardware (Cubieboard 2) at hand, but I cannot change the
any physical connections on it. FWIW, it is https://openvario.org, the
device we are (painfully) trying to upgrade from old kernel-3.4 with
proprietary mali drivers to contemporary software.
> > and sample (but disabled) lvds panel,
>
> That's good for the sake of the example, but it shouldn't be in the
> same patch, it won't be merged.
I jave just submitted version 2 of the patches - set of 2 patches this
time. Addressed your comments, please take a look.
--
Andrey Lebedev aka -.- . -.. -.. . .-.
Software engineer
Homepage: http://lebedev.lt/
next prev parent reply other threads:[~2020-02-12 22:47 UTC|newest]
Thread overview: 114+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-02-10 19:56 [PATCH 1/1] Support LVDS output on Allwinner A20 Andrey Lebedev
2020-02-10 19:56 ` Andrey Lebedev
2020-02-10 19:56 ` Andrey Lebedev
2020-02-11 7:20 ` Maxime Ripard
2020-02-11 7:20 ` Maxime Ripard
2020-02-11 7:20 ` Maxime Ripard
2020-02-11 20:48 ` Andrey Lebedev
2020-02-11 20:48 ` Andrey Lebedev
2020-02-11 20:48 ` Andrey Lebedev
2020-02-12 12:53 ` Maxime Ripard
2020-02-12 12:53 ` Maxime Ripard
2020-02-12 12:53 ` Maxime Ripard
2020-02-12 22:46 ` Andrey Lebedev [this message]
2020-02-12 22:46 ` Andrey Lebedev
2020-02-12 22:46 ` Andrey Lebedev
2020-02-13 9:24 ` Maxime Ripard
2020-02-13 9:24 ` Maxime Ripard
2020-02-13 9:24 ` Maxime Ripard
2020-02-13 18:11 ` Andrey Lebedev
2020-02-13 18:11 ` Andrey Lebedev
2020-02-13 18:11 ` Andrey Lebedev
2020-02-14 7:58 ` Maxime Ripard
2020-02-14 7:58 ` Maxime Ripard
2020-02-14 7:58 ` Maxime Ripard
2020-02-12 22:23 ` [PATCH v2 1/2] ARM: sun7i: " andrey.lebedev
2020-02-12 22:23 ` andrey.lebedev
2020-02-12 22:23 ` andrey.lebedev
2020-02-13 9:32 ` Maxime Ripard
2020-02-13 9:32 ` Maxime Ripard
2020-02-13 9:32 ` Maxime Ripard
2020-02-12 22:23 ` [PATCH v2 2/2] ARM: sun7i: dts: Add LVDS panel support on A20 andrey.lebedev
2020-02-12 22:23 ` andrey.lebedev
2020-02-12 22:23 ` andrey.lebedev
2020-02-13 9:43 ` Maxime Ripard
2020-02-13 9:43 ` Maxime Ripard
2020-02-13 9:43 ` Maxime Ripard
2020-02-13 20:08 ` Andrey Lebedev
2020-02-13 20:08 ` Andrey Lebedev
2020-02-13 20:08 ` Andrey Lebedev
2020-02-14 7:52 ` Maxime Ripard
2020-02-14 7:52 ` Maxime Ripard
2020-02-14 7:52 ` Maxime Ripard
2020-02-14 8:43 ` Andrey Lebedev
2020-02-14 8:43 ` Andrey Lebedev
2020-02-14 8:43 ` Andrey Lebedev
2020-02-14 8:53 ` Maxime Ripard
2020-02-14 8:53 ` Maxime Ripard
2020-02-14 8:53 ` Maxime Ripard
2020-02-14 21:32 ` Andrey Lebedev
2020-02-14 21:32 ` Andrey Lebedev
2020-02-14 21:32 ` Andrey Lebedev
2020-02-17 17:51 ` Maxime Ripard
2020-02-17 17:51 ` Maxime Ripard
2020-02-17 17:51 ` Maxime Ripard
2020-02-18 17:50 ` Andrey Lebedev
2020-02-18 17:50 ` Andrey Lebedev
2020-02-18 17:50 ` Andrey Lebedev
2020-02-19 12:06 ` Maxime Ripard
2020-02-19 12:06 ` Maxime Ripard
2020-02-19 12:06 ` Maxime Ripard
2020-02-13 20:18 ` [PATCH v3 1/3] drm/sun4i: tcon: Introduce LVDS setup routine setting Andrey Lebedev
2020-02-13 20:18 ` Andrey Lebedev
2020-02-13 20:18 ` Andrey Lebedev
2020-02-13 20:18 ` [PATCH v3 2/3] drm/sun4i: tcon: Support LVDS output on Allwinner A20 Andrey Lebedev
2020-02-13 20:18 ` Andrey Lebedev
2020-02-13 20:18 ` Andrey Lebedev
2020-02-13 20:18 ` [PATCH v3 3/3] ARM: dts: sun7i: Add LVDS panel support on A20 Andrey Lebedev
2020-02-13 20:18 ` Andrey Lebedev
2020-02-13 20:18 ` Andrey Lebedev
2020-02-14 8:55 ` Maxime Ripard
2020-02-14 8:55 ` Maxime Ripard
2020-02-14 8:55 ` Maxime Ripard
2020-02-19 18:08 ` PATCH v4 Andrey Lebedev
2020-02-19 18:08 ` Andrey Lebedev
2020-02-19 18:08 ` Andrey Lebedev
2020-02-19 18:08 ` [PATCH 1/5] drm/sun4i: tcon: Introduce LVDS setup routine setting Andrey Lebedev
2020-02-19 18:08 ` Andrey Lebedev
2020-02-19 18:08 ` Andrey Lebedev
2020-02-20 17:21 ` Maxime Ripard
2020-02-20 17:21 ` Maxime Ripard
2020-02-20 17:21 ` Maxime Ripard
2020-02-20 18:19 ` Andrey Lebedev
2020-02-20 18:19 ` Andrey Lebedev
2020-02-20 18:19 ` Andrey Lebedev
2020-02-19 18:08 ` [PATCH 2/5] drm/sun4i: tcon: Separate quirks for tcon0 and tcon1 on A20 Andrey Lebedev
2020-02-19 18:08 ` Andrey Lebedev
2020-02-19 18:08 ` Andrey Lebedev
2020-02-20 17:22 ` Maxime Ripard
2020-02-20 17:22 ` Maxime Ripard
2020-02-20 17:22 ` Maxime Ripard
2020-02-19 18:08 ` [PATCH 3/5] ARM: dts: sun7i: Add LVDS panel support " Andrey Lebedev
2020-02-19 18:08 ` Andrey Lebedev
2020-02-19 18:08 ` Andrey Lebedev
2020-02-20 17:23 ` Maxime Ripard
2020-02-20 17:23 ` Maxime Ripard
2020-02-20 17:23 ` Maxime Ripard
2020-02-19 18:08 ` [PATCH 4/5] dt-bindings: display: sun4i: New compatibles for A20 tcons Andrey Lebedev
2020-02-19 18:08 ` Andrey Lebedev
2020-02-19 18:08 ` Andrey Lebedev
2020-02-20 17:24 ` Maxime Ripard
2020-02-20 17:24 ` Maxime Ripard
2020-02-20 17:24 ` Maxime Ripard
2020-02-19 18:08 ` [PATCH 5/5] drm/sun4i: tcon: Support LVDS output on Allwinner A20 Andrey Lebedev
2020-02-19 18:08 ` Andrey Lebedev
2020-02-19 18:08 ` Andrey Lebedev
2020-02-20 17:25 ` Maxime Ripard
2020-02-20 17:25 ` Maxime Ripard
2020-02-20 17:25 ` Maxime Ripard
2020-04-01 10:59 ` Andrey Lebedev
2020-04-01 10:59 ` Andrey Lebedev
2020-04-01 10:59 ` Andrey Lebedev
2020-04-01 12:14 ` Maxime Ripard
2020-04-01 12:14 ` Maxime Ripard
2020-04-01 12:14 ` Maxime Ripard
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200212224653.GA19494@kedthinkpad \
--to=andrey.lebedev@gmail.com \
--cc=airlied@linux.ie \
--cc=daniel@ffwll.ch \
--cc=dri-devel@lists.freedesktop.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maxime@cerno.tech \
--cc=wens@csie.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.