All of lore.kernel.org
 help / color / mirror / Atom feed
From: Jaedon Shin <jaedon.shin@gmail.com>
To: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
	Florian Fainelli <f.fainelli@gmail.com>,
	bcm-kernel-feedback-list@broadcom.com
Cc: Bjorn Helgaas <bhelgaas@google.com>,
	Rob Herring <robh+dt@kernel.org>,
	Mark Rutland <mark.rutland@arm.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	Andrew Murray <amurray@thegoodpenguin.co.uk>,
	Gregory Fong <gregory.0xf0@gmail.com>,
	Linus Walleij <linus.walleij@linaro.org>,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>,
	linux-gpio@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
	linux-pci@vger.kernel.org, Jaedon Shin <jaedon.shin@gmail.com>
Subject: [PATCH 1/3] PCI: brcmstb: Enable ARCH_BRCMSTB
Date: Thu, 13 Feb 2020 11:59:28 +0900	[thread overview]
Message-ID: <20200213025930.27943-2-jaedon.shin@gmail.com> (raw)
In-Reply-To: <20200213025930.27943-1-jaedon.shin@gmail.com>

Add PCIe support for ARM-based Broadcom STB SoCs.

Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
---
 Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml | 8 +++++++-
 drivers/pci/controller/Kconfig                           | 2 +-
 drivers/pci/controller/pcie-brcmstb.c                    | 1 +
 3 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
index 77d3e81a437b..fb1a78606f78 100644
--- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
@@ -14,7 +14,13 @@ allOf:
 
 properties:
   compatible:
-    const: brcm,bcm2711-pcie # The Raspberry Pi 4
+    oneOf:
+      - description:
+          BCM2711 based Boards
+        const: brcm,bcm2711-pcie
+      - description:
+          ARM-based BCM7XXX Broadcom STB Boards
+        const: brcm,bcm7445-pcie
 
   reg:
     maxItems: 1
diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index 20bf00f587bd..c60a27cff81a 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -254,7 +254,7 @@ config VMD
 
 config PCIE_BRCMSTB
 	tristate "Broadcom Brcmstb PCIe host controller"
-	depends on ARCH_BCM2835 || COMPILE_TEST
+	depends on ARCH_BCM2835 || ARCH_BRCMSTB || COMPILE_TEST
 	depends on OF
 	depends on PCI_MSI_IRQ_DOMAIN
 	help
diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index d20aabc26273..34581a6a7313 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -996,6 +996,7 @@ static int brcm_pcie_probe(struct platform_device *pdev)
 
 static const struct of_device_id brcm_pcie_match[] = {
 	{ .compatible = "brcm,bcm2711-pcie" },
+	{ .compatible = "brcm,bcm7445-pcie" },
 	{},
 };
 MODULE_DEVICE_TABLE(of, brcm_pcie_match);
-- 
2.21.0


WARNING: multiple messages have this Message-ID (diff)
From: Jaedon Shin <jaedon.shin@gmail.com>
To: Nicolas Saenz Julienne <nsaenzjulienne@suse.de>,
	Florian Fainelli <f.fainelli@gmail.com>,
	bcm-kernel-feedback-list@broadcom.com
Cc: Mark Rutland <mark.rutland@arm.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>,
	linux-gpio@vger.kernel.org, linux-pci@vger.kernel.org,
	Linus Walleij <linus.walleij@linaro.org>,
	Jaedon Shin <jaedon.shin@gmail.com>,
	Bartosz Golaszewski <bgolaszewski@baylibre.com>,
	Rob Herring <robh+dt@kernel.org>,
	Gregory Fong <gregory.0xf0@gmail.com>,
	Bjorn Helgaas <bhelgaas@google.com>,
	linux-arm-kernel@lists.infradead.org,
	Andrew Murray <amurray@thegoodpenguin.co.uk>
Subject: [PATCH 1/3] PCI: brcmstb: Enable ARCH_BRCMSTB
Date: Thu, 13 Feb 2020 11:59:28 +0900	[thread overview]
Message-ID: <20200213025930.27943-2-jaedon.shin@gmail.com> (raw)
In-Reply-To: <20200213025930.27943-1-jaedon.shin@gmail.com>

Add PCIe support for ARM-based Broadcom STB SoCs.

Signed-off-by: Jaedon Shin <jaedon.shin@gmail.com>
---
 Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml | 8 +++++++-
 drivers/pci/controller/Kconfig                           | 2 +-
 drivers/pci/controller/pcie-brcmstb.c                    | 1 +
 3 files changed, 9 insertions(+), 2 deletions(-)

diff --git a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
index 77d3e81a437b..fb1a78606f78 100644
--- a/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
+++ b/Documentation/devicetree/bindings/pci/brcm,stb-pcie.yaml
@@ -14,7 +14,13 @@ allOf:
 
 properties:
   compatible:
-    const: brcm,bcm2711-pcie # The Raspberry Pi 4
+    oneOf:
+      - description:
+          BCM2711 based Boards
+        const: brcm,bcm2711-pcie
+      - description:
+          ARM-based BCM7XXX Broadcom STB Boards
+        const: brcm,bcm7445-pcie
 
   reg:
     maxItems: 1
diff --git a/drivers/pci/controller/Kconfig b/drivers/pci/controller/Kconfig
index 20bf00f587bd..c60a27cff81a 100644
--- a/drivers/pci/controller/Kconfig
+++ b/drivers/pci/controller/Kconfig
@@ -254,7 +254,7 @@ config VMD
 
 config PCIE_BRCMSTB
 	tristate "Broadcom Brcmstb PCIe host controller"
-	depends on ARCH_BCM2835 || COMPILE_TEST
+	depends on ARCH_BCM2835 || ARCH_BRCMSTB || COMPILE_TEST
 	depends on OF
 	depends on PCI_MSI_IRQ_DOMAIN
 	help
diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
index d20aabc26273..34581a6a7313 100644
--- a/drivers/pci/controller/pcie-brcmstb.c
+++ b/drivers/pci/controller/pcie-brcmstb.c
@@ -996,6 +996,7 @@ static int brcm_pcie_probe(struct platform_device *pdev)
 
 static const struct of_device_id brcm_pcie_match[] = {
 	{ .compatible = "brcm,bcm2711-pcie" },
+	{ .compatible = "brcm,bcm7445-pcie" },
 	{},
 };
 MODULE_DEVICE_TABLE(of, brcm_pcie_match);
-- 
2.21.0


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

  reply	other threads:[~2020-02-13  2:59 UTC|newest]

Thread overview: 34+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-02-13  2:59 [PATCH 0/3] PCI: brcmstb: Add Broadcom STB support Jaedon Shin
2020-02-13  2:59 ` Jaedon Shin
2020-02-13  2:59 ` Jaedon Shin [this message]
2020-02-13  2:59   ` [PATCH 1/3] PCI: brcmstb: Enable ARCH_BRCMSTB Jaedon Shin
2020-02-13  3:58   ` Florian Fainelli
2020-02-13  3:58     ` Florian Fainelli
2020-02-13  2:59 ` [PATCH 2/3] PCI: brcmstb: Add regulator support Jaedon Shin
2020-02-13  2:59   ` Jaedon Shin
2020-02-13  3:58   ` Florian Fainelli
2020-02-13  3:58     ` Florian Fainelli
2020-02-20 11:07     ` Gregory Fong
2020-02-20 11:07       ` Gregory Fong
2020-02-13 15:25   ` Jim Quinlan
2020-02-13 15:25     ` Jim Quinlan
2020-02-14 10:06   ` Linus Walleij
2020-02-14 10:06     ` Linus Walleij
2020-02-14 11:52     ` Mark Brown
2020-02-14 11:52       ` Mark Brown
2020-02-14 11:01   ` Nicolas Saenz Julienne
2020-02-14 11:01     ` Nicolas Saenz Julienne
2020-02-13  2:59 ` [PATCH 3/3] PCI: brcmstb: Drop clk_put when probe fails and remove Jaedon Shin
2020-02-13  2:59   ` Jaedon Shin
2020-02-13  4:01   ` Florian Fainelli
2020-02-13  4:01     ` Florian Fainelli
2020-02-14 10:55   ` Nicolas Saenz Julienne
2020-02-14 10:55     ` Nicolas Saenz Julienne
2020-02-13  3:54 ` [PATCH 0/3] PCI: brcmstb: Add Broadcom STB support Florian Fainelli
2020-02-13  3:54   ` Florian Fainelli
2020-02-13  5:15   ` Jaedon Shin
2020-02-13  5:15     ` Jaedon Shin
2020-02-13 15:54     ` Jim Quinlan
2020-02-13 15:54       ` Jim Quinlan
2020-02-14  2:16       ` Jaedon Shin
2020-02-14  2:16         ` Jaedon Shin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20200213025930.27943-2-jaedon.shin@gmail.com \
    --to=jaedon.shin@gmail.com \
    --cc=amurray@thegoodpenguin.co.uk \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=bgolaszewski@baylibre.com \
    --cc=bhelgaas@google.com \
    --cc=f.fainelli@gmail.com \
    --cc=gregory.0xf0@gmail.com \
    --cc=linus.walleij@linaro.org \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-pci@vger.kernel.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=mark.rutland@arm.com \
    --cc=nsaenzjulienne@suse.de \
    --cc=robh+dt@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.