[PATCH v3] drm/dp: Add function to parse EDID descriptors for adaptive sync limits

* [PATCH v3] drm/dp: Add function to parse EDID descriptors for adaptive sync limits
@ 2020-03-03  0:08 ` Manasi Navare
  0 siblings, 0 replies; 11+ messages in thread
From: Manasi Navare @ 2020-03-03  0:08 UTC (permalink / raw)
  To: intel-gfx, dri-devel; +Cc: Kazlauskas, Manasi Navare, Nicholas

Adaptive Sync is a VESA feature so add a DRM core helper to parse
the EDID's detailed descritors to obtain the adaptive sync monitor range.
Store this info as part fo drm_display_info so it can be used
across all drivers.
This part of the code is stripped out of amdgpu's function
amdgpu_dm_update_freesync_caps() to make it generic and be used
across all DRM drivers

v3:
* Remove the edid parsing restriction for just DP (Nicholas)
* Use drm_for_each_detailed_block (Ville)
* Make the drm_get_adaptive_sync_range function static (Harry, Jani)
v2:
* Change vmin and vmax to use u8 (Ville)
* Dont store pixel clock since that is just a max dotclock
and not related to VRR mode (Manasi)

Cc: Ville Syrjälä <ville.syrjala@linux.intel.com>
Cc: Harry Wentland <harry.wentland@amd.com>
Cc: Clinton A Taylor <clinton.a.taylor@intel.com>
Cc: Kazlauskas, Nicholas <Nicholas.Kazlauskas@amd.com>
Signed-off-by: Manasi Navare <manasi.d.navare@intel.com>
---
 drivers/gpu/drm/drm_edid.c  | 44 +++++++++++++++++++++++++++++++++++++
 include/drm/drm_connector.h | 22 +++++++++++++++++++
 2 files changed, 66 insertions(+)

diff --git a/drivers/gpu/drm/drm_edid.c b/drivers/gpu/drm/drm_edid.c
index ad41764a4ebe..e3f152180b6b 100644
--- a/drivers/gpu/drm/drm_edid.c
+++ b/drivers/gpu/drm/drm_edid.c
@@ -4938,6 +4938,47 @@ static void drm_parse_cea_ext(struct drm_connector *connector,
 	}
 }
 
+static
+void get_adaptive_sync_range(struct detailed_timing *timing,
+			     void *info_adaptive_sync)
+{
+	struct drm_adaptive_sync_info *adaptive_sync = info_adaptive_sync;
+	const struct detailed_non_pixel *data = &timing->data.other_data;
+	const struct detailed_data_monitor_range *range = &data->data.range;
+
+	if (data->type != EDID_DETAIL_MONITOR_RANGE)
+		return;
+
+	/*
+	 * Check for flag range limits only. If flag == 1 then
+	 * no additional timing information provided.
+	 * Default GTF, GTF Secondary curve and CVT are not
+	 * supported
+	 */
+	if (range->flags != 1)
+		return;
+
+	adaptive_sync->min_vfreq = range->min_vfreq;
+	adaptive_sync->max_vfreq = range->max_vfreq;
+}
+
+static
+void drm_get_adaptive_sync_range(struct drm_connector *connector,
+				 const struct edid *edid)
+{
+	struct drm_display_info *info = &connector->display_info;
+
+	if (!version_greater(edid, 1, 1))
+		return;
+
+	drm_for_each_detailed_block((u8 *)edid, get_adaptive_sync_range,
+				    &info->adaptive_sync);
+
+	DRM_DEBUG_KMS("Adaptive Sync refresh rate range is %d Hz - %d Hz\n",
+		      info->adaptive_sync.min_vfreq,
+		      info->adaptive_sync.max_vfreq);
+}
+
 /* A connector has no EDID information, so we've got no EDID to compute quirks from. Reset
  * all of the values which would have been set from EDID
  */
@@ -4960,6 +5001,7 @@ drm_reset_display_info(struct drm_connector *connector)
 	memset(&info->hdmi, 0, sizeof(info->hdmi));
 
 	info->non_desktop = 0;
+	memset(&info->adaptive_sync, 0, sizeof(info->adaptive_sync));
 }
 
 u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edid)
@@ -4975,6 +5017,8 @@ u32 drm_add_display_info(struct drm_connector *connector, const struct edid *edi
 
 	info->non_desktop = !!(quirks & EDID_QUIRK_NON_DESKTOP);
 
+	drm_get_adaptive_sync_range(connector, edid);
+
 	DRM_DEBUG_KMS("non_desktop set to %d\n", info->non_desktop);
 
 	if (edid->revision < 3)
diff --git a/include/drm/drm_connector.h b/include/drm/drm_connector.h
index 0df7a95ca5d9..2b22c0fa42c4 100644
--- a/include/drm/drm_connector.h
+++ b/include/drm/drm_connector.h
@@ -254,6 +254,23 @@ enum drm_panel_orientation {
 	DRM_MODE_PANEL_ORIENTATION_RIGHT_UP,
 };
 
+/**
+ * struct drm_adaptive_sync_info - Panel's Adaptive Sync capabilities for
+ * &drm_display_info
+ *
+ * This struct is used to store a Panel's Adaptive Sync capabilities
+ * as parsed from EDID's detailed monitor range descriptor block.
+ *
+ * @min_vfreq: This is the min supported refresh rate in Hz from
+ *             EDID's detailed monitor range.
+ * @max_vfreq: This is the max supported refresh rate in Hz from
+ *             EDID's detailed monitor range
+ */
+struct drm_adaptive_sync_info {
+	u8 min_vfreq;
+	u8 max_vfreq;
+};
+
 /*
  * This is a consolidated colorimetry list supported by HDMI and
  * DP protocol standard. The respective connectors will register
@@ -473,6 +490,11 @@ struct drm_display_info {
 	 * @non_desktop: Non desktop display (HMD).
 	 */
 	bool non_desktop;
+
+	/**
+	 * @adaptive_sync: Adaptive Sync capabilities of the DP/eDP sink
+	 */
+	struct drm_adaptive_sync_info adaptive_sync;
 };
 
 int drm_display_info_set_bus_formats(struct drm_display_info *info,
-- 
2.19.1

_______________________________________________
dri-devel mailing list
dri-devel@lists.freedesktop.org
https://lists.freedesktop.org/mailman/listinfo/dri-devel

^ permalink raw reply related	[flat|nested] 11+ messages in thread