From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: Peng Fan <peng.fan@nxp.com>
Cc: bjorn.andersson@linaro.org, o.rempel@pengutronix.de,
robh+dt@kernel.org, linux-remoteproc@vger.kernel.org,
linux-kernel@vger.kernel.org, shawnguo@kernel.org,
s.hauer@pengutronix.de, kernel@pengutronix.de,
festevam@gmail.com, linux-imx@nxp.com,
linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org
Subject: Re: [PATCH 07/10] remoteproc: imx_rproc: add i.MX specific parse fw hook
Date: Tue, 11 Aug 2020 15:56:25 -0600 [thread overview]
Message-ID: <20200811215625.GC3370567@xps15> (raw)
In-Reply-To: <20200724080813.24884-8-peng.fan@nxp.com>
On Fri, Jul 24, 2020 at 04:08:10PM +0800, Peng Fan wrote:
> The hook is used to parse memory-regions and load resource table
> from the address the remote processor published.
>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
> drivers/remoteproc/imx_rproc.c | 99 +++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 98 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
> index c23726091228..43000a992455 100644
> --- a/drivers/remoteproc/imx_rproc.c
> +++ b/drivers/remoteproc/imx_rproc.c
> @@ -11,6 +11,7 @@
> #include <linux/mfd/syscon.h>
> #include <linux/module.h>
> #include <linux/of_address.h>
> +#include <linux/of_reserved_mem.h>
> #include <linux/of_device.h>
> #include <linux/platform_device.h>
> #include <linux/regmap.h>
> @@ -89,6 +90,7 @@ struct imx_rproc {
> const struct imx_rproc_dcfg *dcfg;
> struct imx_rproc_mem mem[IMX7D_RPROC_MEM_MAX];
> struct clk *clk;
> + void *rsc_va;
Where is this used?
> };
>
> static const struct imx_rproc_att imx_rproc_att_imx7d[] = {
> @@ -251,6 +253,101 @@ static void *imx_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len)
> return va;
> }
>
> +static int imx_rproc_mem_alloc(struct rproc *rproc,
> + struct rproc_mem_entry *mem)
> +{
> + struct device *dev = rproc->dev.parent;
> + void *va;
> +
> + dev_dbg(dev, "map memory: %p+%zx\n", &mem->dma, mem->len);
> + va = ioremap_wc(mem->dma, mem->len);
> + if (IS_ERR_OR_NULL(va)) {
> + dev_err(dev, "Unable to map memory region: %p+%zx\n",
> + &mem->dma, mem->len);
> + return -ENOMEM;
> + }
> +
> + /* Update memory entry va */
> + mem->va = va;
> +
> + return 0;
> +}
> +
> +static int imx_rproc_mem_release(struct rproc *rproc,
> + struct rproc_mem_entry *mem)
> +{
> + dev_dbg(rproc->dev.parent, "unmap memory: %pa\n", &mem->dma);
> + iounmap(mem->va);
> +
> + return 0;
> +}
> +
> +static int imx_rproc_parse_memory_regions(struct rproc *rproc)
> +{
> + struct imx_rproc *priv = rproc->priv;
> + struct device_node *np = priv->dev->of_node;
> + struct of_phandle_iterator it;
> + struct rproc_mem_entry *mem;
> + struct reserved_mem *rmem;
> + int index = 0;
> + u32 da;
> +
> + /* Register associated reserved memory regions */
> + of_phandle_iterator_init(&it, np, "memory-region", NULL, 0);
> + while (of_phandle_iterator_next(&it) == 0) {
> + rmem = of_reserved_mem_lookup(it.node);
> + if (!rmem) {
> + dev_err(priv->dev, "unable to acquire memory-region\n");
> + return -EINVAL;
> + }
> +
> + /* No need to translate pa to da, i.MX use same map */
> + da = rmem->base;
> +
> + if (strcmp(it.node->name, "vdev0buffer")) {
Are you sure you will _always_ have a single vdev? From the example you have
given to Oleksij it doesn't seem to be the case...
> + /* Register memory region */
> + mem = rproc_mem_entry_init(priv->dev, NULL,
> + (dma_addr_t)rmem->base,
> + rmem->size, da,
> + imx_rproc_mem_alloc,
> + imx_rproc_mem_release,
> + it.node->name);
> +
> + if (mem)
> + rproc_coredump_add_segment(rproc, da,
> + rmem->size);
> + } else {
> + /* Register reserved memory for vdev buffer alloc */
> + mem = rproc_of_resm_mem_entry_init(priv->dev, index,
> + rmem->size,
> + rmem->base,
> + it.node->name);
> + }
> +
> + if (!mem)
> + return -ENOMEM;
> +
> + rproc_add_carveout(rproc, mem);
> + index++;
> + }
> +
> + return 0;
> +}
> +
> +static int imx_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw)
> +{
> + int ret = imx_rproc_parse_memory_regions(rproc);
> +
> + if (ret)
> + return ret;
> +
> + ret = rproc_elf_load_rsc_table(rproc, fw);
> + if (ret)
> + dev_info(&rproc->dev, "No resource table in elf\n");
> +
> + return 0;
> +}
> +
> static int imx_rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw)
> {
> struct device *dev = &rproc->dev;
> @@ -323,7 +420,7 @@ static const struct rproc_ops imx_rproc_ops = {
> .stop = imx_rproc_stop,
> .da_to_va = imx_rproc_da_to_va,
> .load = imx_rproc_elf_load_segments,
> - .parse_fw = rproc_elf_load_rsc_table,
> + .parse_fw = imx_rproc_parse_fw,
> .find_loaded_rsc_table = rproc_elf_find_loaded_rsc_table,
> .sanity_check = rproc_elf_sanity_check,
> .get_boot_addr = rproc_elf_get_boot_addr,
> --
> 2.16.4
>
WARNING: multiple messages have this Message-ID (diff)
From: Mathieu Poirier <mathieu.poirier@linaro.org>
To: Peng Fan <peng.fan@nxp.com>
Cc: devicetree@vger.kernel.org, festevam@gmail.com,
s.hauer@pengutronix.de, linux-remoteproc@vger.kernel.org,
linux-kernel@vger.kernel.org, bjorn.andersson@linaro.org,
o.rempel@pengutronix.de, robh+dt@kernel.org, linux-imx@nxp.com,
kernel@pengutronix.de, shawnguo@kernel.org,
linux-arm-kernel@lists.infradead.org
Subject: Re: [PATCH 07/10] remoteproc: imx_rproc: add i.MX specific parse fw hook
Date: Tue, 11 Aug 2020 15:56:25 -0600 [thread overview]
Message-ID: <20200811215625.GC3370567@xps15> (raw)
In-Reply-To: <20200724080813.24884-8-peng.fan@nxp.com>
On Fri, Jul 24, 2020 at 04:08:10PM +0800, Peng Fan wrote:
> The hook is used to parse memory-regions and load resource table
> from the address the remote processor published.
>
> Signed-off-by: Peng Fan <peng.fan@nxp.com>
> ---
> drivers/remoteproc/imx_rproc.c | 99 +++++++++++++++++++++++++++++++++++++++++-
> 1 file changed, 98 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/remoteproc/imx_rproc.c b/drivers/remoteproc/imx_rproc.c
> index c23726091228..43000a992455 100644
> --- a/drivers/remoteproc/imx_rproc.c
> +++ b/drivers/remoteproc/imx_rproc.c
> @@ -11,6 +11,7 @@
> #include <linux/mfd/syscon.h>
> #include <linux/module.h>
> #include <linux/of_address.h>
> +#include <linux/of_reserved_mem.h>
> #include <linux/of_device.h>
> #include <linux/platform_device.h>
> #include <linux/regmap.h>
> @@ -89,6 +90,7 @@ struct imx_rproc {
> const struct imx_rproc_dcfg *dcfg;
> struct imx_rproc_mem mem[IMX7D_RPROC_MEM_MAX];
> struct clk *clk;
> + void *rsc_va;
Where is this used?
> };
>
> static const struct imx_rproc_att imx_rproc_att_imx7d[] = {
> @@ -251,6 +253,101 @@ static void *imx_rproc_da_to_va(struct rproc *rproc, u64 da, size_t len)
> return va;
> }
>
> +static int imx_rproc_mem_alloc(struct rproc *rproc,
> + struct rproc_mem_entry *mem)
> +{
> + struct device *dev = rproc->dev.parent;
> + void *va;
> +
> + dev_dbg(dev, "map memory: %p+%zx\n", &mem->dma, mem->len);
> + va = ioremap_wc(mem->dma, mem->len);
> + if (IS_ERR_OR_NULL(va)) {
> + dev_err(dev, "Unable to map memory region: %p+%zx\n",
> + &mem->dma, mem->len);
> + return -ENOMEM;
> + }
> +
> + /* Update memory entry va */
> + mem->va = va;
> +
> + return 0;
> +}
> +
> +static int imx_rproc_mem_release(struct rproc *rproc,
> + struct rproc_mem_entry *mem)
> +{
> + dev_dbg(rproc->dev.parent, "unmap memory: %pa\n", &mem->dma);
> + iounmap(mem->va);
> +
> + return 0;
> +}
> +
> +static int imx_rproc_parse_memory_regions(struct rproc *rproc)
> +{
> + struct imx_rproc *priv = rproc->priv;
> + struct device_node *np = priv->dev->of_node;
> + struct of_phandle_iterator it;
> + struct rproc_mem_entry *mem;
> + struct reserved_mem *rmem;
> + int index = 0;
> + u32 da;
> +
> + /* Register associated reserved memory regions */
> + of_phandle_iterator_init(&it, np, "memory-region", NULL, 0);
> + while (of_phandle_iterator_next(&it) == 0) {
> + rmem = of_reserved_mem_lookup(it.node);
> + if (!rmem) {
> + dev_err(priv->dev, "unable to acquire memory-region\n");
> + return -EINVAL;
> + }
> +
> + /* No need to translate pa to da, i.MX use same map */
> + da = rmem->base;
> +
> + if (strcmp(it.node->name, "vdev0buffer")) {
Are you sure you will _always_ have a single vdev? From the example you have
given to Oleksij it doesn't seem to be the case...
> + /* Register memory region */
> + mem = rproc_mem_entry_init(priv->dev, NULL,
> + (dma_addr_t)rmem->base,
> + rmem->size, da,
> + imx_rproc_mem_alloc,
> + imx_rproc_mem_release,
> + it.node->name);
> +
> + if (mem)
> + rproc_coredump_add_segment(rproc, da,
> + rmem->size);
> + } else {
> + /* Register reserved memory for vdev buffer alloc */
> + mem = rproc_of_resm_mem_entry_init(priv->dev, index,
> + rmem->size,
> + rmem->base,
> + it.node->name);
> + }
> +
> + if (!mem)
> + return -ENOMEM;
> +
> + rproc_add_carveout(rproc, mem);
> + index++;
> + }
> +
> + return 0;
> +}
> +
> +static int imx_rproc_parse_fw(struct rproc *rproc, const struct firmware *fw)
> +{
> + int ret = imx_rproc_parse_memory_regions(rproc);
> +
> + if (ret)
> + return ret;
> +
> + ret = rproc_elf_load_rsc_table(rproc, fw);
> + if (ret)
> + dev_info(&rproc->dev, "No resource table in elf\n");
> +
> + return 0;
> +}
> +
> static int imx_rproc_elf_load_segments(struct rproc *rproc, const struct firmware *fw)
> {
> struct device *dev = &rproc->dev;
> @@ -323,7 +420,7 @@ static const struct rproc_ops imx_rproc_ops = {
> .stop = imx_rproc_stop,
> .da_to_va = imx_rproc_da_to_va,
> .load = imx_rproc_elf_load_segments,
> - .parse_fw = rproc_elf_load_rsc_table,
> + .parse_fw = imx_rproc_parse_fw,
> .find_loaded_rsc_table = rproc_elf_find_loaded_rsc_table,
> .sanity_check = rproc_elf_sanity_check,
> .get_boot_addr = rproc_elf_get_boot_addr,
> --
> 2.16.4
>
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
next prev parent reply other threads:[~2020-08-11 21:56 UTC|newest]
Thread overview: 76+ messages / expand[flat|nested] mbox.gz Atom feed top
2020-07-24 8:08 [PATCH 00/10] remoteproc: imx_rproc: support iMX8M and early boot Peng Fan
2020-07-24 8:08 ` Peng Fan
2020-07-24 8:08 ` [PATCH 01/10] dt-bindings: remoteproc: imx_rproc: add i.MX8MQ/M Peng Fan
2020-07-24 8:08 ` Peng Fan
2020-07-31 20:14 ` Rob Herring
2020-07-31 20:14 ` Rob Herring
2020-07-24 8:08 ` [PATCH 02/10] remoteproc: imx_rproc: correct err message Peng Fan
2020-07-24 8:08 ` Peng Fan
2020-08-11 19:56 ` Mathieu Poirier
2020-08-11 19:56 ` Mathieu Poirier
2020-07-24 8:08 ` [PATCH 03/10] remoteproc: imx: use devm_ioremap Peng Fan
2020-07-24 8:08 ` Peng Fan
2020-07-27 6:23 ` Oleksij Rempel
2020-07-27 6:23 ` Oleksij Rempel
2020-07-27 6:28 ` Peng Fan
2020-07-27 6:28 ` Peng Fan
2020-07-27 6:41 ` Oleksij Rempel
2020-07-27 6:41 ` Oleksij Rempel
2020-07-27 6:51 ` Peng Fan
2020-07-27 6:51 ` Peng Fan
2020-07-27 7:37 ` Oleksij Rempel
2020-07-27 7:37 ` Oleksij Rempel
2020-07-27 8:11 ` Peng Fan
2020-07-27 8:11 ` Peng Fan
2020-07-28 7:20 ` Oleksij Rempel
2020-07-28 7:20 ` Oleksij Rempel
2020-07-24 8:08 ` [PATCH 04/10] remoteproc: imx_rproc: make syscon optional Peng Fan
2020-07-24 8:08 ` Peng Fan
2020-08-11 22:40 ` Mathieu Poirier
2020-08-11 22:40 ` Mathieu Poirier
2020-08-18 21:43 ` Mathieu Poirier
2020-08-18 21:43 ` Mathieu Poirier
2020-08-19 0:51 ` Peng Fan
2020-08-19 0:51 ` Peng Fan
2020-08-19 19:45 ` Mathieu Poirier
2020-08-19 19:45 ` Mathieu Poirier
2020-08-20 2:04 ` Peng Fan
2020-08-20 2:04 ` Peng Fan
2020-08-20 19:27 ` Mathieu Poirier
2020-08-20 19:27 ` Mathieu Poirier
2020-07-24 8:08 ` [PATCH 05/10] remoteproc: imx_rproc: make clk optional Peng Fan
2020-07-24 8:08 ` Peng Fan
2020-07-24 8:08 ` [PATCH 06/10] remoteproc: imx_rproc: add load hook Peng Fan
2020-07-24 8:08 ` Peng Fan
2020-07-27 5:20 ` Oleksij Rempel
2020-07-27 5:20 ` Oleksij Rempel
2020-08-11 21:40 ` Mathieu Poirier
2020-08-11 21:40 ` Mathieu Poirier
2020-07-24 8:08 ` [PATCH 07/10] remoteproc: imx_rproc: add i.MX specific parse fw hook Peng Fan
2020-07-24 8:08 ` Peng Fan
2020-08-11 21:56 ` Mathieu Poirier [this message]
2020-08-11 21:56 ` Mathieu Poirier
2020-07-24 8:08 ` [PATCH 08/10] remoteproc: imx_rproc: support i.MX8MQ/M Peng Fan
2020-07-24 8:08 ` Peng Fan
2020-07-24 8:08 ` [PATCH 09/10] remoteproc: imx_proc: enable virtio/mailbox Peng Fan
2020-07-24 8:08 ` Peng Fan
2020-07-24 8:08 ` [PATCH 10/10] remoteproc: imx_rproc: support coproc booting before Linux Peng Fan
2020-07-24 8:08 ` Peng Fan
2020-08-11 22:36 ` Mathieu Poirier
2020-08-11 22:36 ` Mathieu Poirier
2020-07-27 6:38 ` [PATCH 00/10] remoteproc: imx_rproc: support iMX8M and early boot Oleksij Rempel
2020-07-27 6:38 ` Oleksij Rempel
2020-07-27 6:44 ` Peng Fan
2020-07-27 6:44 ` Peng Fan
2020-07-27 7:54 ` Oleksij Rempel
2020-07-27 7:54 ` Oleksij Rempel
2020-07-27 9:18 ` Peng Fan
2020-07-27 9:18 ` Peng Fan
2020-07-28 7:26 ` Oleksij Rempel
2020-07-28 7:26 ` Oleksij Rempel
2020-07-28 7:50 ` Peng Fan
2020-07-28 7:50 ` Peng Fan
2020-07-28 7:55 ` Oleksij Rempel
2020-07-28 7:55 ` Oleksij Rempel
2020-07-28 9:36 ` Peng Fan
2020-07-28 9:36 ` Peng Fan
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20200811215625.GC3370567@xps15 \
--to=mathieu.poirier@linaro.org \
--cc=bjorn.andersson@linaro.org \
--cc=devicetree@vger.kernel.org \
--cc=festevam@gmail.com \
--cc=kernel@pengutronix.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-imx@nxp.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-remoteproc@vger.kernel.org \
--cc=o.rempel@pengutronix.de \
--cc=peng.fan@nxp.com \
--cc=robh+dt@kernel.org \
--cc=s.hauer@pengutronix.de \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.