All of lore.kernel.org
 help / color / mirror / Atom feed
From: Vivek Unune <npcomplete13@gmail.com>
To: florian.fainelli@broadcom.com, hauke@hauke-m.de,
	zajec5@gmail.com, bcm-kernel-feedback-list@broadcom.com,
	robh+dt@kernel.org, linux-arm-kernel@lists.infradead.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Vivek Unune <npcomplete13@gmail.com>
Subject: [PATCH v2 1/2] ARM: dts: BCM5301X: pinctrl - use correct driver and define mdio pins
Date: Wed,  4 Nov 2020 15:29:51 -0500	[thread overview]
Message-ID: <20201104202952.783724-2-npcomplete13@gmail.com> (raw)
In-Reply-To: <20201104202952.783724-1-npcomplete13@gmail.com>

BCM47094 version of pinmux uses different driver and supports mdio
pinmux pins. Hence, use the correct driver and define the pins.

Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
---
---
 arch/arm/boot/dts/bcm47094.dtsi | 9 +++++++++
 arch/arm/boot/dts/bcm5301x.dtsi | 2 +-
 2 files changed, 10 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/bcm47094.dtsi b/arch/arm/boot/dts/bcm47094.dtsi
index cdc5ff593adb..747ca030435f 100644
--- a/arch/arm/boot/dts/bcm47094.dtsi
+++ b/arch/arm/boot/dts/bcm47094.dtsi
@@ -8,6 +8,15 @@
 / {
 };
 
+&pinctrl {
+	compatible = "brcm,bcm4709-pinmux";
+
+	pinmux_mdio: mdio {
+		groups = "mdio_grp";
+		function = "mdio";
+	};
+};
+
 &usb3_phy {
 	compatible = "brcm,ns-bx-usb3-phy";
 };
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index 3e55ff4fb550..cfc08cdd590f 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -428,7 +428,7 @@ cru@100 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			pin-controller@1c0 {
+			pinctrl: pin-controller@1c0 {
 				compatible = "brcm,bcm4708-pinmux";
 				reg = <0x1c0 0x24>;
 				reg-names = "cru_gpio_control";
-- 
2.25.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

WARNING: multiple messages have this Message-ID (diff)
From: Vivek Unune <npcomplete13@gmail.com>
To: florian.fainelli@broadcom.com, hauke@hauke-m.de,
	zajec5@gmail.com, bcm-kernel-feedback-list@broadcom.com,
	robh+dt@kernel.org, linux-arm-kernel@lists.infradead.org,
	devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: Vivek Unune <npcomplete13@gmail.com>
Subject: [PATCH v2 1/2] ARM: dts: BCM5301X: pinctrl - use correct driver and define mdio pins
Date: Wed,  4 Nov 2020 15:29:51 -0500	[thread overview]
Message-ID: <20201104202952.783724-2-npcomplete13@gmail.com> (raw)
In-Reply-To: <20201104202952.783724-1-npcomplete13@gmail.com>

BCM47094 version of pinmux uses different driver and supports mdio
pinmux pins. Hence, use the correct driver and define the pins.

Signed-off-by: Vivek Unune <npcomplete13@gmail.com>
---
---
 arch/arm/boot/dts/bcm47094.dtsi | 9 +++++++++
 arch/arm/boot/dts/bcm5301x.dtsi | 2 +-
 2 files changed, 10 insertions(+), 1 deletion(-)

diff --git a/arch/arm/boot/dts/bcm47094.dtsi b/arch/arm/boot/dts/bcm47094.dtsi
index cdc5ff593adb..747ca030435f 100644
--- a/arch/arm/boot/dts/bcm47094.dtsi
+++ b/arch/arm/boot/dts/bcm47094.dtsi
@@ -8,6 +8,15 @@
 / {
 };
 
+&pinctrl {
+	compatible = "brcm,bcm4709-pinmux";
+
+	pinmux_mdio: mdio {
+		groups = "mdio_grp";
+		function = "mdio";
+	};
+};
+
 &usb3_phy {
 	compatible = "brcm,ns-bx-usb3-phy";
 };
diff --git a/arch/arm/boot/dts/bcm5301x.dtsi b/arch/arm/boot/dts/bcm5301x.dtsi
index 3e55ff4fb550..cfc08cdd590f 100644
--- a/arch/arm/boot/dts/bcm5301x.dtsi
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
@@ -428,7 +428,7 @@ cru@100 {
 			#address-cells = <1>;
 			#size-cells = <1>;
 
-			pin-controller@1c0 {
+			pinctrl: pin-controller@1c0 {
 				compatible = "brcm,bcm4708-pinmux";
 				reg = <0x1c0 0x24>;
 				reg-names = "cru_gpio_control";
-- 
2.25.1


  reply	other threads:[~2020-11-05  3:44 UTC|newest]

Thread overview: 48+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2020-10-07 19:01 [PATCH 0/3] ARM: dts: BCM5301X: Linksys EA9500 device tree changes Vivek Unune
2020-10-07 19:01 ` Vivek Unune
2020-10-07 19:01 ` [PATCH 1/3] ARM: dts: BCM5301X: Linksys EA9500 make use of pinctrl Vivek Unune
2020-10-07 19:01   ` Vivek Unune
2020-10-07 21:01   ` Andrew Lunn
2020-10-07 21:01     ` Andrew Lunn
2020-10-07 21:46     ` Vivek Unune
2020-10-07 21:46       ` Vivek Unune
2020-10-08  0:26       ` Andrew Lunn
2020-10-08  0:26         ` Andrew Lunn
2020-10-08 12:41         ` Vivek Unune
2020-10-08 12:41           ` Vivek Unune
2020-11-04 20:29   ` [PATCH v2 0/2] " Vivek Unune
2020-11-04 20:29     ` Vivek Unune
2020-11-04 20:29     ` Vivek Unune [this message]
2020-11-04 20:29       ` [PATCH v2 1/2] ARM: dts: BCM5301X: pinctrl - use correct driver and define mdio pins Vivek Unune
2020-11-09 17:21       ` Rafał Miłecki
2020-11-09 17:21         ` Rafał Miłecki
2020-11-09 17:25         ` Florian Fainelli
2020-11-09 17:25           ` Florian Fainelli
2020-11-04 20:29     ` [PATCH v2 2/2] ARM: dts: BCM5301X: Linksys EA9500 make use of pinctrl Vivek Unune
2020-11-04 20:29       ` Vivek Unune
2020-11-04 20:37       ` Florian Fainelli
2020-11-04 20:37         ` Florian Fainelli
2020-11-04 20:58         ` Vivek Unune
2020-11-04 20:58           ` Vivek Unune
2020-11-09 13:24           ` Vivek Unune
2020-11-09 13:24             ` Vivek Unune
2020-11-09 15:54             ` Florian Fainelli
2020-11-09 15:54               ` Florian Fainelli
2020-11-09 17:24       ` Florian Fainelli
2020-11-09 17:24         ` Florian Fainelli
2020-11-10 13:17         ` Vivek Unune
2020-11-10 13:17           ` Vivek Unune
2020-10-07 19:01 ` [PATCH 2/3] ARM: dts: BCM5301X: Linksys EA9500 add port 5 and port 7 Vivek Unune
2020-10-07 19:01   ` Vivek Unune
2020-10-07 21:03   ` Andrew Lunn
2020-10-07 21:03     ` Andrew Lunn
2020-10-07 22:07     ` Vivek Unune
2020-10-07 22:07       ` Vivek Unune
2020-10-08  0:32       ` Andrew Lunn
2020-10-08  0:32         ` Andrew Lunn
2020-10-08 14:58         ` Florian Fainelli
2020-10-08 14:58           ` Florian Fainelli
2020-10-08 20:20           ` Vivek Unune
2020-10-08 20:20             ` Vivek Unune
2020-10-07 19:01 ` [PATCH 3/3] ARM: dts: BCM5301X: Linksys EA9500 add fixed partitions Vivek Unune
2020-10-07 19:01   ` Vivek Unune

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20201104202952.783724-2-npcomplete13@gmail.com \
    --to=npcomplete13@gmail.com \
    --cc=bcm-kernel-feedback-list@broadcom.com \
    --cc=devicetree@vger.kernel.org \
    --cc=florian.fainelli@broadcom.com \
    --cc=hauke@hauke-m.de \
    --cc=linux-arm-kernel@lists.infradead.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=robh+dt@kernel.org \
    --cc=zajec5@gmail.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.