All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Marek Behún" <kabel@kernel.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Sasha Levin <sashal@kernel.org>
Cc: pali@kernel.org, stable@vger.kernel.org,
	"Marek Behún" <kabel@kernel.org>
Subject: [PATCH 5.4 00/22] Armada 3720 PCIe fixes for 5.4
Date: Thu, 25 Nov 2021 01:25:54 +0100	[thread overview]
Message-ID: <20211125002616.31363-1-kabel@kernel.org> (raw)

Hello Greg, Sasha,

this series for 5.4-stable backports all the fixes (and their
dependencies) for Armada 3720 PCIe driver.
These include:
- fixes (and their dependencies) for pci-aardvark controller
- fixes for pci-bridge-emul
- fixes (and their dependencies) for pinctrl-armada-37xx driver
- device-tree fixes

Marek

Grzegorz Jaszczyk (1):
  PCI: aardvark: Fix big endian support

Marek Behún (4):
  PCI: aardvark: Improve link training
  PCI: aardvark: Deduplicate code in advk_pcie_rd_conf()
  pinctrl: armada-37xx: Correct PWM pins definitions
  arm64: dts: marvell: armada-37xx: Set pcie_reset_pin to gpio function

Pali Rohár (15):
  PCI: aardvark: Train link immediately after enabling training
  PCI: aardvark: Issue PERST via GPIO
  PCI: aardvark: Replace custom macros by standard linux/pci_regs.h
    macros
  PCI: aardvark: Don't touch PCIe registers if no card connected
  PCI: aardvark: Fix compilation on s390
  PCI: aardvark: Move PCIe reset card code to advk_pcie_train_link()
  PCI: aardvark: Update comment about disabling link training
  PCI: aardvark: Configure PCIe resources from 'ranges' DT property
  PCI: aardvark: Fix PCIe Max Payload Size setting
  PCI: aardvark: Implement re-issuing config requests on CRS response
  PCI: aardvark: Simplify initialization of rootcap on virtual bridge
  PCI: aardvark: Fix link training
  PCI: aardvark: Fix support for bus mastering and PCI_COMMAND on
    emulated bridge
  PCI: aardvark: Set PCI Bridge Class Code to PCI Bridge
  PCI: aardvark: Fix support for PCI_BRIDGE_CTL_BUS_RESET on emulated
    bridge

Remi Pommarel (1):
  PCI: aardvark: Wait for endpoint to be ready before training link

Russell King (1):
  PCI: pci-bridge-emul: Fix array overruns, improve safety

 .../pinctrl/marvell,armada-37xx-pinctrl.txt   |   8 +-
 .../arm64/boot/dts/marvell/armada-3720-db.dts |   3 +
 .../dts/marvell/armada-3720-espressobin.dts   |   1 +
 .../dts/marvell/armada-3720-turris-mox.dts    |   4 -
 arch/arm64/boot/dts/marvell/armada-37xx.dtsi  |   2 +-
 drivers/pci/controller/pci-aardvark.c         | 576 ++++++++++++++----
 drivers/pci/pci-bridge-emul.c                 |  11 +-
 drivers/pinctrl/mvebu/pinctrl-armada-37xx.c   |  17 +-
 8 files changed, 489 insertions(+), 133 deletions(-)

-- 
2.32.0


             reply	other threads:[~2021-11-25  0:28 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-25  0:25 Marek Behún [this message]
2021-11-25  0:25 ` [PATCH 5.4 01/22] PCI: aardvark: Wait for endpoint to be ready before training link Marek Behún
2021-11-25  0:25 ` [PATCH 5.4 02/22] PCI: aardvark: Fix big endian support Marek Behún
2021-11-25  0:25 ` [PATCH 5.4 03/22] PCI: aardvark: Train link immediately after enabling training Marek Behún
2021-11-25  0:25 ` [PATCH 5.4 04/22] PCI: aardvark: Improve link training Marek Behún
2021-11-25  0:25 ` [PATCH 5.4 05/22] PCI: aardvark: Issue PERST via GPIO Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 06/22] PCI: aardvark: Replace custom macros by standard linux/pci_regs.h macros Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 07/22] PCI: aardvark: Don't touch PCIe registers if no card connected Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 08/22] PCI: aardvark: Fix compilation on s390 Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 09/22] PCI: aardvark: Move PCIe reset card code to advk_pcie_train_link() Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 10/22] PCI: aardvark: Update comment about disabling link training Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 11/22] PCI: pci-bridge-emul: Fix array overruns, improve safety Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 12/22] PCI: aardvark: Configure PCIe resources from 'ranges' DT property Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 13/22] PCI: aardvark: Fix PCIe Max Payload Size setting Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 14/22] PCI: aardvark: Deduplicate code in advk_pcie_rd_conf() Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 15/22] PCI: aardvark: Implement re-issuing config requests on CRS response Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 16/22] PCI: aardvark: Simplify initialization of rootcap on virtual bridge Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 17/22] PCI: aardvark: Fix link training Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 18/22] PCI: aardvark: Fix support for bus mastering and PCI_COMMAND on emulated bridge Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 19/22] PCI: aardvark: Set PCI Bridge Class Code to PCI Bridge Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 20/22] PCI: aardvark: Fix support for PCI_BRIDGE_CTL_BUS_RESET on emulated bridge Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 21/22] pinctrl: armada-37xx: Correct PWM pins definitions Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 22/22] arm64: dts: marvell: armada-37xx: Set pcie_reset_pin to gpio function Marek Behún
2021-11-28 13:00 ` [PATCH 5.4 00/22] Armada 3720 PCIe fixes for 5.4 Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211125002616.31363-1-kabel@kernel.org \
    --to=kabel@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=pali@kernel.org \
    --cc=sashal@kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.