All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Marek Behún" <kabel@kernel.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Sasha Levin <sashal@kernel.org>
Cc: pali@kernel.org, stable@vger.kernel.org,
	"Marek Behún" <kabel@kernel.org>,
	"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>
Subject: [PATCH 5.4 19/22] PCI: aardvark: Set PCI Bridge Class Code to PCI Bridge
Date: Thu, 25 Nov 2021 01:26:13 +0100	[thread overview]
Message-ID: <20211125002616.31363-20-kabel@kernel.org> (raw)
In-Reply-To: <20211125002616.31363-1-kabel@kernel.org>

From: Pali Rohár <pali@kernel.org>

commit 84e1b4045dc887b78bdc87d92927093dc3a465aa upstream.

Aardvark controller has something like config space of a Root Port
available at offset 0x0 of internal registers - these registers are used
for implementation of the emulated bridge.

The default value of Class Code of this bridge corresponds to a RAID Mass
storage controller, though. (This is probably intended for when the
controller is used as Endpoint.)

Change the Class Code to correspond to a PCI Bridge.

Add comment explaining this change.

Link: https://lore.kernel.org/r/20211028185659.20329-6-kabel@kernel.org
Fixes: 8a3ebd8de328 ("PCI: aardvark: Implement emulated root PCI bridge config space")
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Cc: stable@vger.kernel.org
Signed-off-by: Marek Behún <kabel@kernel.org>
---
 drivers/pci/controller/pci-aardvark.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index 2fe6b3aa8919..3265709bfba9 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -502,6 +502,26 @@ static void advk_pcie_setup_hw(struct advk_pcie *pcie)
 	reg = (PCI_VENDOR_ID_MARVELL << 16) | PCI_VENDOR_ID_MARVELL;
 	advk_writel(pcie, reg, VENDOR_ID_REG);
 
+	/*
+	 * Change Class Code of PCI Bridge device to PCI Bridge (0x600400),
+	 * because the default value is Mass storage controller (0x010400).
+	 *
+	 * Note that this Aardvark PCI Bridge does not have compliant Type 1
+	 * Configuration Space and it even cannot be accessed via Aardvark's
+	 * PCI config space access method. Something like config space is
+	 * available in internal Aardvark registers starting at offset 0x0
+	 * and is reported as Type 0. In range 0x10 - 0x34 it has totally
+	 * different registers.
+	 *
+	 * Therefore driver uses emulation of PCI Bridge which emulates
+	 * access to configuration space via internal Aardvark registers or
+	 * emulated configuration buffer.
+	 */
+	reg = advk_readl(pcie, PCIE_CORE_DEV_REV_REG);
+	reg &= ~0xffffff00;
+	reg |= (PCI_CLASS_BRIDGE_PCI << 8) << 8;
+	advk_writel(pcie, reg, PCIE_CORE_DEV_REV_REG);
+
 	/* Disable Root Bridge I/O space, memory space and bus mastering */
 	reg = advk_readl(pcie, PCIE_CORE_CMD_STATUS_REG);
 	reg &= ~(PCI_COMMAND_IO | PCI_COMMAND_MEMORY | PCI_COMMAND_MASTER);
-- 
2.32.0


  parent reply	other threads:[~2021-11-25  0:32 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-25  0:25 [PATCH 5.4 00/22] Armada 3720 PCIe fixes for 5.4 Marek Behún
2021-11-25  0:25 ` [PATCH 5.4 01/22] PCI: aardvark: Wait for endpoint to be ready before training link Marek Behún
2021-11-25  0:25 ` [PATCH 5.4 02/22] PCI: aardvark: Fix big endian support Marek Behún
2021-11-25  0:25 ` [PATCH 5.4 03/22] PCI: aardvark: Train link immediately after enabling training Marek Behún
2021-11-25  0:25 ` [PATCH 5.4 04/22] PCI: aardvark: Improve link training Marek Behún
2021-11-25  0:25 ` [PATCH 5.4 05/22] PCI: aardvark: Issue PERST via GPIO Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 06/22] PCI: aardvark: Replace custom macros by standard linux/pci_regs.h macros Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 07/22] PCI: aardvark: Don't touch PCIe registers if no card connected Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 08/22] PCI: aardvark: Fix compilation on s390 Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 09/22] PCI: aardvark: Move PCIe reset card code to advk_pcie_train_link() Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 10/22] PCI: aardvark: Update comment about disabling link training Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 11/22] PCI: pci-bridge-emul: Fix array overruns, improve safety Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 12/22] PCI: aardvark: Configure PCIe resources from 'ranges' DT property Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 13/22] PCI: aardvark: Fix PCIe Max Payload Size setting Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 14/22] PCI: aardvark: Deduplicate code in advk_pcie_rd_conf() Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 15/22] PCI: aardvark: Implement re-issuing config requests on CRS response Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 16/22] PCI: aardvark: Simplify initialization of rootcap on virtual bridge Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 17/22] PCI: aardvark: Fix link training Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 18/22] PCI: aardvark: Fix support for bus mastering and PCI_COMMAND on emulated bridge Marek Behún
2021-11-25  0:26 ` Marek Behún [this message]
2021-11-25  0:26 ` [PATCH 5.4 20/22] PCI: aardvark: Fix support for PCI_BRIDGE_CTL_BUS_RESET " Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 21/22] pinctrl: armada-37xx: Correct PWM pins definitions Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 22/22] arm64: dts: marvell: armada-37xx: Set pcie_reset_pin to gpio function Marek Behún
2021-11-28 13:00 ` [PATCH 5.4 00/22] Armada 3720 PCIe fixes for 5.4 Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211125002616.31363-20-kabel@kernel.org \
    --to=kabel@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=pali@kernel.org \
    --cc=sashal@kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.