All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Marek Behún" <kabel@kernel.org>
To: Greg Kroah-Hartman <gregkh@linuxfoundation.org>,
	Sasha Levin <sashal@kernel.org>
Cc: pali@kernel.org, stable@vger.kernel.org,
	"Marek Behún" <kabel@kernel.org>,
	"Lorenzo Pieralisi" <lorenzo.pieralisi@arm.com>
Subject: [PATCH 5.4 15/22] PCI: aardvark: Implement re-issuing config requests on CRS response
Date: Thu, 25 Nov 2021 01:26:09 +0100	[thread overview]
Message-ID: <20211125002616.31363-16-kabel@kernel.org> (raw)
In-Reply-To: <20211125002616.31363-1-kabel@kernel.org>

From: Pali Rohár <pali@kernel.org>

commit 223dec14a05337a4155f1deed46d2becce4d00fd upstream.

Commit 43f5c77bcbd2 ("PCI: aardvark: Fix reporting CRS value") fixed
handling of CRS response and when CRSSVE flag was not enabled it marked CRS
response as failed transaction (due to simplicity).

But pci-aardvark.c driver is already waiting up to the PIO_RETRY_CNT count
for PIO config response and so we can with a small change implement
re-issuing of config requests as described in PCIe base specification.

This change implements re-issuing of config requests when response is CRS.
Set upper bound of wait cycles to around PIO_RETRY_CNT, afterwards the
transaction is marked as failed and an all-ones value is returned as
before.

We do this by returning appropriate error codes from function
advk_pcie_check_pio_status(). On CRS we return -EAGAIN and caller then
reissues transaction.

Link: https://lore.kernel.org/r/20211005180952.6812-10-kabel@kernel.org
Signed-off-by: Pali Rohár <pali@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Lorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Reviewed-by: Marek Behún <kabel@kernel.org>
Signed-off-by: Marek Behún <kabel@kernel.org>
---
 drivers/pci/controller/pci-aardvark.c | 67 +++++++++++++++++----------
 1 file changed, 43 insertions(+), 24 deletions(-)

diff --git a/drivers/pci/controller/pci-aardvark.c b/drivers/pci/controller/pci-aardvark.c
index 47becbaf2103..bd5d309232a9 100644
--- a/drivers/pci/controller/pci-aardvark.c
+++ b/drivers/pci/controller/pci-aardvark.c
@@ -666,6 +666,7 @@ static int advk_pcie_check_pio_status(struct advk_pcie *pcie, bool allow_crs, u3
 	u32 reg;
 	unsigned int status;
 	char *strcomp_status, *str_posted;
+	int ret;
 
 	reg = advk_readl(pcie, PIO_STAT);
 	status = (reg & PIO_COMPLETION_STATUS_MASK) >>
@@ -690,6 +691,7 @@ static int advk_pcie_check_pio_status(struct advk_pcie *pcie, bool allow_crs, u3
 	case PIO_COMPLETION_STATUS_OK:
 		if (reg & PIO_ERR_STATUS) {
 			strcomp_status = "COMP_ERR";
+			ret = -EFAULT;
 			break;
 		}
 		/* Get the read result */
@@ -697,9 +699,11 @@ static int advk_pcie_check_pio_status(struct advk_pcie *pcie, bool allow_crs, u3
 			*val = advk_readl(pcie, PIO_RD_DATA);
 		/* No error */
 		strcomp_status = NULL;
+		ret = 0;
 		break;
 	case PIO_COMPLETION_STATUS_UR:
 		strcomp_status = "UR";
+		ret = -EOPNOTSUPP;
 		break;
 	case PIO_COMPLETION_STATUS_CRS:
 		if (allow_crs && val) {
@@ -717,6 +721,7 @@ static int advk_pcie_check_pio_status(struct advk_pcie *pcie, bool allow_crs, u3
 			 */
 			*val = CFG_RD_CRS_VAL;
 			strcomp_status = NULL;
+			ret = 0;
 			break;
 		}
 		/* PCIe r4.0, sec 2.3.2, says:
@@ -732,21 +737,24 @@ static int advk_pcie_check_pio_status(struct advk_pcie *pcie, bool allow_crs, u3
 		 * Request and taking appropriate action, e.g., complete the
 		 * Request to the host as a failed transaction.
 		 *
-		 * To simplify implementation do not re-issue the Configuration
-		 * Request and complete the Request as a failed transaction.
+		 * So return -EAGAIN and caller (pci-aardvark.c driver) will
+		 * re-issue request again up to the PIO_RETRY_CNT retries.
 		 */
 		strcomp_status = "CRS";
+		ret = -EAGAIN;
 		break;
 	case PIO_COMPLETION_STATUS_CA:
 		strcomp_status = "CA";
+		ret = -ECANCELED;
 		break;
 	default:
 		strcomp_status = "Unknown";
+		ret = -EINVAL;
 		break;
 	}
 
 	if (!strcomp_status)
-		return 0;
+		return ret;
 
 	if (reg & PIO_NON_POSTED_REQ)
 		str_posted = "Non-posted";
@@ -756,7 +764,7 @@ static int advk_pcie_check_pio_status(struct advk_pcie *pcie, bool allow_crs, u3
 	dev_dbg(dev, "%s PIO Response Status: %s, %#x @ %#x\n",
 		str_posted, strcomp_status, reg, advk_readl(pcie, PIO_ADDR_LS));
 
-	return -EFAULT;
+	return ret;
 }
 
 static int advk_pcie_wait_pio(struct advk_pcie *pcie)
@@ -764,13 +772,13 @@ static int advk_pcie_wait_pio(struct advk_pcie *pcie)
 	struct device *dev = &pcie->pdev->dev;
 	int i;
 
-	for (i = 0; i < PIO_RETRY_CNT; i++) {
+	for (i = 1; i <= PIO_RETRY_CNT; i++) {
 		u32 start, isr;
 
 		start = advk_readl(pcie, PIO_START);
 		isr = advk_readl(pcie, PIO_ISR);
 		if (!start && isr)
-			return 0;
+			return i;
 		udelay(PIO_RETRY_DELAY);
 	}
 
@@ -974,6 +982,7 @@ static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn,
 			     int where, int size, u32 *val)
 {
 	struct advk_pcie *pcie = bus->sysdata;
+	int retry_count;
 	bool allow_crs;
 	u32 reg;
 	int ret;
@@ -1016,16 +1025,22 @@ static int advk_pcie_rd_conf(struct pci_bus *bus, u32 devfn,
 	/* Program the data strobe */
 	advk_writel(pcie, 0xf, PIO_WR_DATA_STRB);
 
-	/* Clear PIO DONE ISR and start the transfer */
-	advk_writel(pcie, 1, PIO_ISR);
-	advk_writel(pcie, 1, PIO_START);
+	retry_count = 0;
+	do {
+		/* Clear PIO DONE ISR and start the transfer */
+		advk_writel(pcie, 1, PIO_ISR);
+		advk_writel(pcie, 1, PIO_START);
 
-	ret = advk_pcie_wait_pio(pcie);
-	if (ret < 0)
-		goto try_crs;
+		ret = advk_pcie_wait_pio(pcie);
+		if (ret < 0)
+			goto try_crs;
+
+		retry_count += ret;
+
+		/* Check PIO status and get the read result */
+		ret = advk_pcie_check_pio_status(pcie, allow_crs, val);
+	} while (ret == -EAGAIN && retry_count < PIO_RETRY_CNT);
 
-	/* Check PIO status and get the read result */
-	ret = advk_pcie_check_pio_status(pcie, allow_crs, val);
 	if (ret < 0)
 		goto fail;
 
@@ -1057,6 +1072,7 @@ static int advk_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
 	struct advk_pcie *pcie = bus->sysdata;
 	u32 reg;
 	u32 data_strobe = 0x0;
+	int retry_count;
 	int offset;
 	int ret;
 
@@ -1098,19 +1114,22 @@ static int advk_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
 	/* Program the data strobe */
 	advk_writel(pcie, data_strobe, PIO_WR_DATA_STRB);
 
-	/* Clear PIO DONE ISR and start the transfer */
-	advk_writel(pcie, 1, PIO_ISR);
-	advk_writel(pcie, 1, PIO_START);
+	retry_count = 0;
+	do {
+		/* Clear PIO DONE ISR and start the transfer */
+		advk_writel(pcie, 1, PIO_ISR);
+		advk_writel(pcie, 1, PIO_START);
 
-	ret = advk_pcie_wait_pio(pcie);
-	if (ret < 0)
-		return PCIBIOS_SET_FAILED;
+		ret = advk_pcie_wait_pio(pcie);
+		if (ret < 0)
+			return PCIBIOS_SET_FAILED;
 
-	ret = advk_pcie_check_pio_status(pcie, false, NULL);
-	if (ret < 0)
-		return PCIBIOS_SET_FAILED;
+		retry_count += ret;
 
-	return PCIBIOS_SUCCESSFUL;
+		ret = advk_pcie_check_pio_status(pcie, false, NULL);
+	} while (ret == -EAGAIN && retry_count < PIO_RETRY_CNT);
+
+	return ret < 0 ? PCIBIOS_SET_FAILED : PCIBIOS_SUCCESSFUL;
 }
 
 static struct pci_ops advk_pcie_ops = {
-- 
2.32.0


  parent reply	other threads:[~2021-11-25  0:32 UTC|newest]

Thread overview: 24+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2021-11-25  0:25 [PATCH 5.4 00/22] Armada 3720 PCIe fixes for 5.4 Marek Behún
2021-11-25  0:25 ` [PATCH 5.4 01/22] PCI: aardvark: Wait for endpoint to be ready before training link Marek Behún
2021-11-25  0:25 ` [PATCH 5.4 02/22] PCI: aardvark: Fix big endian support Marek Behún
2021-11-25  0:25 ` [PATCH 5.4 03/22] PCI: aardvark: Train link immediately after enabling training Marek Behún
2021-11-25  0:25 ` [PATCH 5.4 04/22] PCI: aardvark: Improve link training Marek Behún
2021-11-25  0:25 ` [PATCH 5.4 05/22] PCI: aardvark: Issue PERST via GPIO Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 06/22] PCI: aardvark: Replace custom macros by standard linux/pci_regs.h macros Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 07/22] PCI: aardvark: Don't touch PCIe registers if no card connected Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 08/22] PCI: aardvark: Fix compilation on s390 Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 09/22] PCI: aardvark: Move PCIe reset card code to advk_pcie_train_link() Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 10/22] PCI: aardvark: Update comment about disabling link training Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 11/22] PCI: pci-bridge-emul: Fix array overruns, improve safety Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 12/22] PCI: aardvark: Configure PCIe resources from 'ranges' DT property Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 13/22] PCI: aardvark: Fix PCIe Max Payload Size setting Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 14/22] PCI: aardvark: Deduplicate code in advk_pcie_rd_conf() Marek Behún
2021-11-25  0:26 ` Marek Behún [this message]
2021-11-25  0:26 ` [PATCH 5.4 16/22] PCI: aardvark: Simplify initialization of rootcap on virtual bridge Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 17/22] PCI: aardvark: Fix link training Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 18/22] PCI: aardvark: Fix support for bus mastering and PCI_COMMAND on emulated bridge Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 19/22] PCI: aardvark: Set PCI Bridge Class Code to PCI Bridge Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 20/22] PCI: aardvark: Fix support for PCI_BRIDGE_CTL_BUS_RESET on emulated bridge Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 21/22] pinctrl: armada-37xx: Correct PWM pins definitions Marek Behún
2021-11-25  0:26 ` [PATCH 5.4 22/22] arm64: dts: marvell: armada-37xx: Set pcie_reset_pin to gpio function Marek Behún
2021-11-28 13:00 ` [PATCH 5.4 00/22] Armada 3720 PCIe fixes for 5.4 Greg Kroah-Hartman

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20211125002616.31363-16-kabel@kernel.org \
    --to=kabel@kernel.org \
    --cc=gregkh@linuxfoundation.org \
    --cc=lorenzo.pieralisi@arm.com \
    --cc=pali@kernel.org \
    --cc=sashal@kernel.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.