[PATCH v3 4/8] phy: phy-rockchip-inno-usb2: support standalone phy nodes

[Peter Geis <pgwipeout@gmail.com>]

New Rockchip devices have the usb2 phy devices as standalone nodes
instead of children of the grf node.
Allow the driver to find the grf node from a phandle.

Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Michael Riesch <michael.riesch@wolfvision.net>

---
 drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 17 ++++++++++++-----
 1 file changed, 12 insertions(+), 5 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index 5cfa7169d879..29e3a0da8c26 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -1074,12 +1074,19 @@ static int rockchip_usb2phy_probe(struct platform_device *pdev)
 		return -EINVAL;
 	}
 
-	if (!dev->parent || !dev->parent->of_node)
-		return -EINVAL;
+	if (!dev->parent || !dev->parent->of_node) {
+		rphy->grf = syscon_regmap_lookup_by_phandle(np, "rockchip,usbgrf");
+		if (IS_ERR(rphy->grf)) {
+			dev_err(dev, "failed to locate usbgrf\n");
+			return PTR_ERR(rphy->grf);
+		}
+	}
 
-	rphy->grf = syscon_node_to_regmap(dev->parent->of_node);
-	if (IS_ERR(rphy->grf))
-		return PTR_ERR(rphy->grf);
+	else {
+		rphy->grf = syscon_node_to_regmap(dev->parent->of_node);
+			if (IS_ERR(rphy->grf))
+				return PTR_ERR(rphy->grf);
+	}
 
 	if (of_device_is_compatible(np, "rockchip,rv1108-usb2phy")) {
 		rphy->usbgrf =
-- 
2.25.1


-- 
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy