From: Peter Geis <pgwipeout@gmail.com>
To: Rob Herring <robh+dt@kernel.org>, Heiko Stuebner <heiko@sntech.de>
Cc: Peter Geis <pgwipeout@gmail.com>,
Michael Riesch <michael.riesch@wolfvision.net>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 7/8] arm64: dts: rockchip: add usb2 nodes to rk3568 device tree
Date: Wed, 15 Dec 2021 16:02:51 -0500 [thread overview]
Message-ID: <20211215210252.120923-8-pgwipeout@gmail.com> (raw)
In-Reply-To: <20211215210252.120923-1-pgwipeout@gmail.com>
Add the requisite nodes to the rk3568 device tree to enable the usb2
device controllers.
Includes the usb2phy nodes, usb2phy grf nodes, and usb2 controller
nodes.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Michael Riesch <michael.riesch@wolfvision.net>
---
arch/arm64/boot/dts/rockchip/rk356x.dtsi | 98 ++++++++++++++++++++++++
1 file changed, 98 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
index 46d9552f6028..2c2b1014e53b 100644
--- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
@@ -204,6 +204,50 @@ gic: interrupt-controller@fd400000 {
msi-controller;
};
+ usb_host0_ehci: usb@fd800000 {
+ compatible = "generic-ehci";
+ reg = <0x0 0xfd800000 0x0 0x40000>;
+ interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_USB2HOST0>, <&cru HCLK_USB2HOST0_ARB>,
+ <&cru PCLK_USB>;
+ phys = <&u2phy1_otg>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usb_host0_ohci: usb@fd840000 {
+ compatible = "generic-ohci";
+ reg = <0x0 0xfd840000 0x0 0x40000>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_USB2HOST0>, <&cru HCLK_USB2HOST0_ARB>,
+ <&cru PCLK_USB>;
+ phys = <&u2phy1_otg>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usb_host1_ehci: usb@fd880000 {
+ compatible = "generic-ehci";
+ reg = <0x0 0xfd880000 0x0 0x40000>;
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_USB2HOST1>, <&cru HCLK_USB2HOST1_ARB>,
+ <&cru PCLK_USB>;
+ phys = <&u2phy1_host>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usb_host1_ohci: usb@fd8c0000 {
+ compatible = "generic-ohci";
+ reg = <0x0 0xfd8c0000 0x0 0x40000>;
+ interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_USB2HOST1>, <&cru HCLK_USB2HOST1_ARB>,
+ <&cru PCLK_USB>;
+ phys = <&u2phy1_host>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
pmugrf: syscon@fdc20000 {
compatible = "rockchip,rk3568-pmugrf", "syscon", "simple-mfd";
reg = <0x0 0xfdc20000 0x0 0x10000>;
@@ -219,6 +263,16 @@ grf: syscon@fdc60000 {
reg = <0x0 0xfdc60000 0x0 0x10000>;
};
+ usb2phy0_grf: syscon@fdca0000 {
+ compatible = "rockchip,rk3568-usb2phy-grf", "syscon";
+ reg = <0x0 0xfdca0000 0x0 0x8000>;
+ };
+
+ usb2phy1_grf: syscon@fdca8000 {
+ compatible = "rockchip,rk3568-usb2phy-grf", "syscon";
+ reg = <0x0 0xfdca8000 0x0 0x8000>;
+ };
+
pmucru: clock-controller@fdd00000 {
compatible = "rockchip,rk3568-pmucru";
reg = <0x0 0xfdd00000 0x0 0x1000>;
@@ -1077,6 +1131,50 @@ pwm15: pwm@fe700030 {
status = "disabled";
};
+ u2phy0: usb2phy@fe8a0000 {
+ compatible = "rockchip,rk3568-usb2phy";
+ reg = <0x0 0xfe8a0000 0x0 0x10000>;
+ clocks = <&pmucru CLK_USBPHY0_REF>;
+ clock-names = "phyclk";
+ clock-output-names = "clk_usbphy0_480m";
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+ rockchip,usbgrf = <&usb2phy0_grf>;
+ #clock-cells = <0>;
+ status = "disabled";
+
+ u2phy0_host: host-port {
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ u2phy0_otg: otg-port {
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ u2phy1: usb2phy@fe8b0000 {
+ compatible = "rockchip,rk3568-usb2phy";
+ reg = <0x0 0xfe8b0000 0x0 0x10000>;
+ clocks = <&pmucru CLK_USBPHY1_REF>;
+ clock-names = "phyclk";
+ clock-output-names = "clk_usbphy1_480m";
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+ rockchip,usbgrf = <&usb2phy1_grf>;
+ #clock-cells = <0>;
+ status = "disabled";
+
+ u2phy1_host: host-port {
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ u2phy1_otg: otg-port {
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+ };
+
pinctrl: pinctrl {
compatible = "rockchip,rk3568-pinctrl";
rockchip,grf = <&grf>;
--
2.25.1
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
WARNING: multiple messages have this Message-ID (diff)
From: Peter Geis <pgwipeout@gmail.com>
To: Rob Herring <robh+dt@kernel.org>, Heiko Stuebner <heiko@sntech.de>
Cc: Peter Geis <pgwipeout@gmail.com>,
Michael Riesch <michael.riesch@wolfvision.net>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 7/8] arm64: dts: rockchip: add usb2 nodes to rk3568 device tree
Date: Wed, 15 Dec 2021 16:02:51 -0500 [thread overview]
Message-ID: <20211215210252.120923-8-pgwipeout@gmail.com> (raw)
In-Reply-To: <20211215210252.120923-1-pgwipeout@gmail.com>
Add the requisite nodes to the rk3568 device tree to enable the usb2
device controllers.
Includes the usb2phy nodes, usb2phy grf nodes, and usb2 controller
nodes.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Michael Riesch <michael.riesch@wolfvision.net>
---
arch/arm64/boot/dts/rockchip/rk356x.dtsi | 98 ++++++++++++++++++++++++
1 file changed, 98 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
index 46d9552f6028..2c2b1014e53b 100644
--- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
@@ -204,6 +204,50 @@ gic: interrupt-controller@fd400000 {
msi-controller;
};
+ usb_host0_ehci: usb@fd800000 {
+ compatible = "generic-ehci";
+ reg = <0x0 0xfd800000 0x0 0x40000>;
+ interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_USB2HOST0>, <&cru HCLK_USB2HOST0_ARB>,
+ <&cru PCLK_USB>;
+ phys = <&u2phy1_otg>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usb_host0_ohci: usb@fd840000 {
+ compatible = "generic-ohci";
+ reg = <0x0 0xfd840000 0x0 0x40000>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_USB2HOST0>, <&cru HCLK_USB2HOST0_ARB>,
+ <&cru PCLK_USB>;
+ phys = <&u2phy1_otg>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usb_host1_ehci: usb@fd880000 {
+ compatible = "generic-ehci";
+ reg = <0x0 0xfd880000 0x0 0x40000>;
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_USB2HOST1>, <&cru HCLK_USB2HOST1_ARB>,
+ <&cru PCLK_USB>;
+ phys = <&u2phy1_host>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usb_host1_ohci: usb@fd8c0000 {
+ compatible = "generic-ohci";
+ reg = <0x0 0xfd8c0000 0x0 0x40000>;
+ interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_USB2HOST1>, <&cru HCLK_USB2HOST1_ARB>,
+ <&cru PCLK_USB>;
+ phys = <&u2phy1_host>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
pmugrf: syscon@fdc20000 {
compatible = "rockchip,rk3568-pmugrf", "syscon", "simple-mfd";
reg = <0x0 0xfdc20000 0x0 0x10000>;
@@ -219,6 +263,16 @@ grf: syscon@fdc60000 {
reg = <0x0 0xfdc60000 0x0 0x10000>;
};
+ usb2phy0_grf: syscon@fdca0000 {
+ compatible = "rockchip,rk3568-usb2phy-grf", "syscon";
+ reg = <0x0 0xfdca0000 0x0 0x8000>;
+ };
+
+ usb2phy1_grf: syscon@fdca8000 {
+ compatible = "rockchip,rk3568-usb2phy-grf", "syscon";
+ reg = <0x0 0xfdca8000 0x0 0x8000>;
+ };
+
pmucru: clock-controller@fdd00000 {
compatible = "rockchip,rk3568-pmucru";
reg = <0x0 0xfdd00000 0x0 0x1000>;
@@ -1077,6 +1131,50 @@ pwm15: pwm@fe700030 {
status = "disabled";
};
+ u2phy0: usb2phy@fe8a0000 {
+ compatible = "rockchip,rk3568-usb2phy";
+ reg = <0x0 0xfe8a0000 0x0 0x10000>;
+ clocks = <&pmucru CLK_USBPHY0_REF>;
+ clock-names = "phyclk";
+ clock-output-names = "clk_usbphy0_480m";
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+ rockchip,usbgrf = <&usb2phy0_grf>;
+ #clock-cells = <0>;
+ status = "disabled";
+
+ u2phy0_host: host-port {
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ u2phy0_otg: otg-port {
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ u2phy1: usb2phy@fe8b0000 {
+ compatible = "rockchip,rk3568-usb2phy";
+ reg = <0x0 0xfe8b0000 0x0 0x10000>;
+ clocks = <&pmucru CLK_USBPHY1_REF>;
+ clock-names = "phyclk";
+ clock-output-names = "clk_usbphy1_480m";
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+ rockchip,usbgrf = <&usb2phy1_grf>;
+ #clock-cells = <0>;
+ status = "disabled";
+
+ u2phy1_host: host-port {
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ u2phy1_otg: otg-port {
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+ };
+
pinctrl: pinctrl {
compatible = "rockchip,rk3568-pinctrl";
rockchip,grf = <&grf>;
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Peter Geis <pgwipeout@gmail.com>
To: Rob Herring <robh+dt@kernel.org>, Heiko Stuebner <heiko@sntech.de>
Cc: Peter Geis <pgwipeout@gmail.com>,
Michael Riesch <michael.riesch@wolfvision.net>,
devicetree@vger.kernel.org, linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 7/8] arm64: dts: rockchip: add usb2 nodes to rk3568 device tree
Date: Wed, 15 Dec 2021 16:02:51 -0500 [thread overview]
Message-ID: <20211215210252.120923-8-pgwipeout@gmail.com> (raw)
In-Reply-To: <20211215210252.120923-1-pgwipeout@gmail.com>
Add the requisite nodes to the rk3568 device tree to enable the usb2
device controllers.
Includes the usb2phy nodes, usb2phy grf nodes, and usb2 controller
nodes.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Michael Riesch <michael.riesch@wolfvision.net>
---
arch/arm64/boot/dts/rockchip/rk356x.dtsi | 98 ++++++++++++++++++++++++
1 file changed, 98 insertions(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk356x.dtsi b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
index 46d9552f6028..2c2b1014e53b 100644
--- a/arch/arm64/boot/dts/rockchip/rk356x.dtsi
+++ b/arch/arm64/boot/dts/rockchip/rk356x.dtsi
@@ -204,6 +204,50 @@ gic: interrupt-controller@fd400000 {
msi-controller;
};
+ usb_host0_ehci: usb@fd800000 {
+ compatible = "generic-ehci";
+ reg = <0x0 0xfd800000 0x0 0x40000>;
+ interrupts = <GIC_SPI 130 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_USB2HOST0>, <&cru HCLK_USB2HOST0_ARB>,
+ <&cru PCLK_USB>;
+ phys = <&u2phy1_otg>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usb_host0_ohci: usb@fd840000 {
+ compatible = "generic-ohci";
+ reg = <0x0 0xfd840000 0x0 0x40000>;
+ interrupts = <GIC_SPI 131 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_USB2HOST0>, <&cru HCLK_USB2HOST0_ARB>,
+ <&cru PCLK_USB>;
+ phys = <&u2phy1_otg>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usb_host1_ehci: usb@fd880000 {
+ compatible = "generic-ehci";
+ reg = <0x0 0xfd880000 0x0 0x40000>;
+ interrupts = <GIC_SPI 133 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_USB2HOST1>, <&cru HCLK_USB2HOST1_ARB>,
+ <&cru PCLK_USB>;
+ phys = <&u2phy1_host>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
+ usb_host1_ohci: usb@fd8c0000 {
+ compatible = "generic-ohci";
+ reg = <0x0 0xfd8c0000 0x0 0x40000>;
+ interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
+ clocks = <&cru HCLK_USB2HOST1>, <&cru HCLK_USB2HOST1_ARB>,
+ <&cru PCLK_USB>;
+ phys = <&u2phy1_host>;
+ phy-names = "usb";
+ status = "disabled";
+ };
+
pmugrf: syscon@fdc20000 {
compatible = "rockchip,rk3568-pmugrf", "syscon", "simple-mfd";
reg = <0x0 0xfdc20000 0x0 0x10000>;
@@ -219,6 +263,16 @@ grf: syscon@fdc60000 {
reg = <0x0 0xfdc60000 0x0 0x10000>;
};
+ usb2phy0_grf: syscon@fdca0000 {
+ compatible = "rockchip,rk3568-usb2phy-grf", "syscon";
+ reg = <0x0 0xfdca0000 0x0 0x8000>;
+ };
+
+ usb2phy1_grf: syscon@fdca8000 {
+ compatible = "rockchip,rk3568-usb2phy-grf", "syscon";
+ reg = <0x0 0xfdca8000 0x0 0x8000>;
+ };
+
pmucru: clock-controller@fdd00000 {
compatible = "rockchip,rk3568-pmucru";
reg = <0x0 0xfdd00000 0x0 0x1000>;
@@ -1077,6 +1131,50 @@ pwm15: pwm@fe700030 {
status = "disabled";
};
+ u2phy0: usb2phy@fe8a0000 {
+ compatible = "rockchip,rk3568-usb2phy";
+ reg = <0x0 0xfe8a0000 0x0 0x10000>;
+ clocks = <&pmucru CLK_USBPHY0_REF>;
+ clock-names = "phyclk";
+ clock-output-names = "clk_usbphy0_480m";
+ interrupts = <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>;
+ rockchip,usbgrf = <&usb2phy0_grf>;
+ #clock-cells = <0>;
+ status = "disabled";
+
+ u2phy0_host: host-port {
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ u2phy0_otg: otg-port {
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+ };
+
+ u2phy1: usb2phy@fe8b0000 {
+ compatible = "rockchip,rk3568-usb2phy";
+ reg = <0x0 0xfe8b0000 0x0 0x10000>;
+ clocks = <&pmucru CLK_USBPHY1_REF>;
+ clock-names = "phyclk";
+ clock-output-names = "clk_usbphy1_480m";
+ interrupts = <GIC_SPI 136 IRQ_TYPE_LEVEL_HIGH>;
+ rockchip,usbgrf = <&usb2phy1_grf>;
+ #clock-cells = <0>;
+ status = "disabled";
+
+ u2phy1_host: host-port {
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+
+ u2phy1_otg: otg-port {
+ #phy-cells = <0>;
+ status = "disabled";
+ };
+ };
+
pinctrl: pinctrl {
compatible = "rockchip,rk3568-pinctrl";
rockchip,grf = <&grf>;
--
2.25.1
next prev parent reply other threads:[~2021-12-15 21:05 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-15 21:02 [PATCH v3 0/8] phy-rockchip-inno-usb2: support rk356x usb2phy Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-15 21:02 ` [PATCH v3 1/8] dt-bindings: soc: rockchip: add rk3568-usb2phy-grf Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-15 21:02 ` [PATCH v3 2/8] dt-bindings: phy: phy-rockchip-inno-usb2: add rk3568 documentation Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-16 20:31 ` Rob Herring
2021-12-16 20:31 ` Rob Herring
2021-12-16 20:31 ` Rob Herring
2021-12-16 20:31 ` Rob Herring
2021-12-15 21:02 ` [PATCH v3 3/8] phy: phy-rockchip-inno-usb2: support #address_cells = 2 Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-15 21:02 ` [PATCH v3 4/8] phy: phy-rockchip-inno-usb2: support standalone phy nodes Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-15 21:02 ` [PATCH v3 5/8] phy: phy-rockchip-inno-usb2: support muxed interrupts Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-15 21:02 ` [PATCH v3 6/8] phy: phy-rockchip-inno-usb2: add rk3568 support Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-15 21:02 ` Peter Geis [this message]
2021-12-15 21:02 ` [PATCH v3 7/8] arm64: dts: rockchip: add usb2 nodes to rk3568 device tree Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-15 21:02 ` [PATCH v3 8/8] arm64: dts: rockchip: add Quartz64-A usb2 support Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-23 11:25 ` [PATCH v3 0/8] phy-rockchip-inno-usb2: support rk356x usb2phy Vinod Koul
2021-12-23 11:25 ` Vinod Koul
2021-12-23 11:25 ` Vinod Koul
2021-12-23 11:25 ` Vinod Koul
2021-12-28 0:48 ` (subset) " Heiko Stuebner
2021-12-28 0:48 ` Heiko Stuebner
2021-12-28 0:48 ` Heiko Stuebner
2021-12-28 0:48 ` Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211215210252.120923-8-pgwipeout@gmail.com \
--to=pgwipeout@gmail.com \
--cc=devicetree@vger.kernel.org \
--cc=heiko@sntech.de \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=michael.riesch@wolfvision.net \
--cc=robh+dt@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.