From: Peter Geis <pgwipeout@gmail.com>
To: Kishon Vijay Abraham I <kishon@ti.com>,
Vinod Koul <vkoul@kernel.org>, Heiko Stuebner <heiko@sntech.de>
Cc: Peter Geis <pgwipeout@gmail.com>,
Michael Riesch <michael.riesch@wolfvision.net>,
linux-phy@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 6/8] phy: phy-rockchip-inno-usb2: add rk3568 support
Date: Wed, 15 Dec 2021 16:02:50 -0500 [thread overview]
Message-ID: <20211215210252.120923-7-pgwipeout@gmail.com> (raw)
In-Reply-To: <20211215210252.120923-1-pgwipeout@gmail.com>
The rk3568 usb2phy is a standalone device with a single muxed interrupt.
Add support for the registers to the usb2phy driver.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Michael Riesch <michael.riesch@wolfvision.net>
---
drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 65 +++++++++++++++++++
1 file changed, 65 insertions(+)
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index 285958fdab38..bdc5a861891c 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -1093,6 +1093,7 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
if (ret) {
dev_err(rphy->dev, "failed to init irq for host port\n");
goto out;
+ }
if (!IS_ERR(rphy->edev)) {
rport->event_nb.notifier_call = rockchip_otg_event;
@@ -1504,6 +1505,69 @@ static const struct rockchip_usb2phy_cfg rk3399_phy_cfgs[] = {
{ /* sentinel */ }
};
+static const struct rockchip_usb2phy_cfg rk3568_phy_cfgs[] = {
+ {
+ .reg = 0xfe8a0000,
+ .num_ports = 2,
+ .clkout_ctl = { 0x0008, 4, 4, 1, 0 },
+ .port_cfgs = {
+ [USB2PHY_PORT_OTG] = {
+ .phy_sus = { 0x0000, 8, 0, 0, 0x1d1 },
+ .bvalid_det_en = { 0x0080, 2, 2, 0, 1 },
+ .bvalid_det_st = { 0x0084, 2, 2, 0, 1 },
+ .bvalid_det_clr = { 0x0088, 2, 2, 0, 1 },
+ .utmi_avalid = { 0x00c0, 10, 10, 0, 1 },
+ .utmi_bvalid = { 0x00c0, 9, 9, 0, 1 },
+ },
+ [USB2PHY_PORT_HOST] = {
+ /* Select suspend control from controller */
+ .phy_sus = { 0x0004, 8, 0, 0x1d2, 0x1d2 },
+ .ls_det_en = { 0x0080, 1, 1, 0, 1 },
+ .ls_det_st = { 0x0084, 1, 1, 0, 1 },
+ .ls_det_clr = { 0x0088, 1, 1, 0, 1 },
+ .utmi_ls = { 0x00c0, 17, 16, 0, 1 },
+ .utmi_hstdet = { 0x00c0, 19, 19, 0, 1 }
+ }
+ },
+ .chg_det = {
+ .opmode = { 0x0000, 3, 0, 5, 1 },
+ .cp_det = { 0x00c0, 24, 24, 0, 1 },
+ .dcp_det = { 0x00c0, 23, 23, 0, 1 },
+ .dp_det = { 0x00c0, 25, 25, 0, 1 },
+ .idm_sink_en = { 0x0008, 8, 8, 0, 1 },
+ .idp_sink_en = { 0x0008, 7, 7, 0, 1 },
+ .idp_src_en = { 0x0008, 9, 9, 0, 1 },
+ .rdm_pdwn_en = { 0x0008, 10, 10, 0, 1 },
+ .vdm_src_en = { 0x0008, 12, 12, 0, 1 },
+ .vdp_src_en = { 0x0008, 11, 11, 0, 1 },
+ },
+ },
+ {
+ .reg = 0xfe8b0000,
+ .num_ports = 2,
+ .clkout_ctl = { 0x0008, 4, 4, 1, 0 },
+ .port_cfgs = {
+ [USB2PHY_PORT_OTG] = {
+ .phy_sus = { 0x0000, 8, 0, 0x1d2, 0x1d1 },
+ .ls_det_en = { 0x0080, 0, 0, 0, 1 },
+ .ls_det_st = { 0x0084, 0, 0, 0, 1 },
+ .ls_det_clr = { 0x0088, 0, 0, 0, 1 },
+ .utmi_ls = { 0x00c0, 5, 4, 0, 1 },
+ .utmi_hstdet = { 0x00c0, 7, 7, 0, 1 }
+ },
+ [USB2PHY_PORT_HOST] = {
+ .phy_sus = { 0x0004, 8, 0, 0x1d2, 0x1d1 },
+ .ls_det_en = { 0x0080, 1, 1, 0, 1 },
+ .ls_det_st = { 0x0084, 1, 1, 0, 1 },
+ .ls_det_clr = { 0x0088, 1, 1, 0, 1 },
+ .utmi_ls = { 0x00c0, 17, 16, 0, 1 },
+ .utmi_hstdet = { 0x00c0, 19, 19, 0, 1 }
+ }
+ },
+ },
+ { /* sentinel */ }
+};
+
static const struct rockchip_usb2phy_cfg rv1108_phy_cfgs[] = {
{
.reg = 0x100,
@@ -1553,6 +1617,7 @@ static const struct of_device_id rockchip_usb2phy_dt_match[] = {
{ .compatible = "rockchip,rk3328-usb2phy", .data = &rk3328_phy_cfgs },
{ .compatible = "rockchip,rk3366-usb2phy", .data = &rk3366_phy_cfgs },
{ .compatible = "rockchip,rk3399-usb2phy", .data = &rk3399_phy_cfgs },
+ { .compatible = "rockchip,rk3568-usb2phy", .data = &rk3568_phy_cfgs },
{ .compatible = "rockchip,rv1108-usb2phy", .data = &rv1108_phy_cfgs },
{}
};
--
2.25.1
--
linux-phy mailing list
linux-phy@lists.infradead.org
https://lists.infradead.org/mailman/listinfo/linux-phy
WARNING: multiple messages have this Message-ID (diff)
From: Peter Geis <pgwipeout@gmail.com>
To: Kishon Vijay Abraham I <kishon@ti.com>,
Vinod Koul <vkoul@kernel.org>, Heiko Stuebner <heiko@sntech.de>
Cc: Peter Geis <pgwipeout@gmail.com>,
Michael Riesch <michael.riesch@wolfvision.net>,
linux-phy@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 6/8] phy: phy-rockchip-inno-usb2: add rk3568 support
Date: Wed, 15 Dec 2021 16:02:50 -0500 [thread overview]
Message-ID: <20211215210252.120923-7-pgwipeout@gmail.com> (raw)
In-Reply-To: <20211215210252.120923-1-pgwipeout@gmail.com>
The rk3568 usb2phy is a standalone device with a single muxed interrupt.
Add support for the registers to the usb2phy driver.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Michael Riesch <michael.riesch@wolfvision.net>
---
drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 65 +++++++++++++++++++
1 file changed, 65 insertions(+)
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index 285958fdab38..bdc5a861891c 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -1093,6 +1093,7 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
if (ret) {
dev_err(rphy->dev, "failed to init irq for host port\n");
goto out;
+ }
if (!IS_ERR(rphy->edev)) {
rport->event_nb.notifier_call = rockchip_otg_event;
@@ -1504,6 +1505,69 @@ static const struct rockchip_usb2phy_cfg rk3399_phy_cfgs[] = {
{ /* sentinel */ }
};
+static const struct rockchip_usb2phy_cfg rk3568_phy_cfgs[] = {
+ {
+ .reg = 0xfe8a0000,
+ .num_ports = 2,
+ .clkout_ctl = { 0x0008, 4, 4, 1, 0 },
+ .port_cfgs = {
+ [USB2PHY_PORT_OTG] = {
+ .phy_sus = { 0x0000, 8, 0, 0, 0x1d1 },
+ .bvalid_det_en = { 0x0080, 2, 2, 0, 1 },
+ .bvalid_det_st = { 0x0084, 2, 2, 0, 1 },
+ .bvalid_det_clr = { 0x0088, 2, 2, 0, 1 },
+ .utmi_avalid = { 0x00c0, 10, 10, 0, 1 },
+ .utmi_bvalid = { 0x00c0, 9, 9, 0, 1 },
+ },
+ [USB2PHY_PORT_HOST] = {
+ /* Select suspend control from controller */
+ .phy_sus = { 0x0004, 8, 0, 0x1d2, 0x1d2 },
+ .ls_det_en = { 0x0080, 1, 1, 0, 1 },
+ .ls_det_st = { 0x0084, 1, 1, 0, 1 },
+ .ls_det_clr = { 0x0088, 1, 1, 0, 1 },
+ .utmi_ls = { 0x00c0, 17, 16, 0, 1 },
+ .utmi_hstdet = { 0x00c0, 19, 19, 0, 1 }
+ }
+ },
+ .chg_det = {
+ .opmode = { 0x0000, 3, 0, 5, 1 },
+ .cp_det = { 0x00c0, 24, 24, 0, 1 },
+ .dcp_det = { 0x00c0, 23, 23, 0, 1 },
+ .dp_det = { 0x00c0, 25, 25, 0, 1 },
+ .idm_sink_en = { 0x0008, 8, 8, 0, 1 },
+ .idp_sink_en = { 0x0008, 7, 7, 0, 1 },
+ .idp_src_en = { 0x0008, 9, 9, 0, 1 },
+ .rdm_pdwn_en = { 0x0008, 10, 10, 0, 1 },
+ .vdm_src_en = { 0x0008, 12, 12, 0, 1 },
+ .vdp_src_en = { 0x0008, 11, 11, 0, 1 },
+ },
+ },
+ {
+ .reg = 0xfe8b0000,
+ .num_ports = 2,
+ .clkout_ctl = { 0x0008, 4, 4, 1, 0 },
+ .port_cfgs = {
+ [USB2PHY_PORT_OTG] = {
+ .phy_sus = { 0x0000, 8, 0, 0x1d2, 0x1d1 },
+ .ls_det_en = { 0x0080, 0, 0, 0, 1 },
+ .ls_det_st = { 0x0084, 0, 0, 0, 1 },
+ .ls_det_clr = { 0x0088, 0, 0, 0, 1 },
+ .utmi_ls = { 0x00c0, 5, 4, 0, 1 },
+ .utmi_hstdet = { 0x00c0, 7, 7, 0, 1 }
+ },
+ [USB2PHY_PORT_HOST] = {
+ .phy_sus = { 0x0004, 8, 0, 0x1d2, 0x1d1 },
+ .ls_det_en = { 0x0080, 1, 1, 0, 1 },
+ .ls_det_st = { 0x0084, 1, 1, 0, 1 },
+ .ls_det_clr = { 0x0088, 1, 1, 0, 1 },
+ .utmi_ls = { 0x00c0, 17, 16, 0, 1 },
+ .utmi_hstdet = { 0x00c0, 19, 19, 0, 1 }
+ }
+ },
+ },
+ { /* sentinel */ }
+};
+
static const struct rockchip_usb2phy_cfg rv1108_phy_cfgs[] = {
{
.reg = 0x100,
@@ -1553,6 +1617,7 @@ static const struct of_device_id rockchip_usb2phy_dt_match[] = {
{ .compatible = "rockchip,rk3328-usb2phy", .data = &rk3328_phy_cfgs },
{ .compatible = "rockchip,rk3366-usb2phy", .data = &rk3366_phy_cfgs },
{ .compatible = "rockchip,rk3399-usb2phy", .data = &rk3399_phy_cfgs },
+ { .compatible = "rockchip,rk3568-usb2phy", .data = &rk3568_phy_cfgs },
{ .compatible = "rockchip,rv1108-usb2phy", .data = &rv1108_phy_cfgs },
{}
};
--
2.25.1
_______________________________________________
Linux-rockchip mailing list
Linux-rockchip@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-rockchip
WARNING: multiple messages have this Message-ID (diff)
From: Peter Geis <pgwipeout@gmail.com>
To: Kishon Vijay Abraham I <kishon@ti.com>,
Vinod Koul <vkoul@kernel.org>, Heiko Stuebner <heiko@sntech.de>
Cc: Peter Geis <pgwipeout@gmail.com>,
Michael Riesch <michael.riesch@wolfvision.net>,
linux-phy@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 6/8] phy: phy-rockchip-inno-usb2: add rk3568 support
Date: Wed, 15 Dec 2021 16:02:50 -0500 [thread overview]
Message-ID: <20211215210252.120923-7-pgwipeout@gmail.com> (raw)
In-Reply-To: <20211215210252.120923-1-pgwipeout@gmail.com>
The rk3568 usb2phy is a standalone device with a single muxed interrupt.
Add support for the registers to the usb2phy driver.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Michael Riesch <michael.riesch@wolfvision.net>
---
drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 65 +++++++++++++++++++
1 file changed, 65 insertions(+)
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index 285958fdab38..bdc5a861891c 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -1093,6 +1093,7 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
if (ret) {
dev_err(rphy->dev, "failed to init irq for host port\n");
goto out;
+ }
if (!IS_ERR(rphy->edev)) {
rport->event_nb.notifier_call = rockchip_otg_event;
@@ -1504,6 +1505,69 @@ static const struct rockchip_usb2phy_cfg rk3399_phy_cfgs[] = {
{ /* sentinel */ }
};
+static const struct rockchip_usb2phy_cfg rk3568_phy_cfgs[] = {
+ {
+ .reg = 0xfe8a0000,
+ .num_ports = 2,
+ .clkout_ctl = { 0x0008, 4, 4, 1, 0 },
+ .port_cfgs = {
+ [USB2PHY_PORT_OTG] = {
+ .phy_sus = { 0x0000, 8, 0, 0, 0x1d1 },
+ .bvalid_det_en = { 0x0080, 2, 2, 0, 1 },
+ .bvalid_det_st = { 0x0084, 2, 2, 0, 1 },
+ .bvalid_det_clr = { 0x0088, 2, 2, 0, 1 },
+ .utmi_avalid = { 0x00c0, 10, 10, 0, 1 },
+ .utmi_bvalid = { 0x00c0, 9, 9, 0, 1 },
+ },
+ [USB2PHY_PORT_HOST] = {
+ /* Select suspend control from controller */
+ .phy_sus = { 0x0004, 8, 0, 0x1d2, 0x1d2 },
+ .ls_det_en = { 0x0080, 1, 1, 0, 1 },
+ .ls_det_st = { 0x0084, 1, 1, 0, 1 },
+ .ls_det_clr = { 0x0088, 1, 1, 0, 1 },
+ .utmi_ls = { 0x00c0, 17, 16, 0, 1 },
+ .utmi_hstdet = { 0x00c0, 19, 19, 0, 1 }
+ }
+ },
+ .chg_det = {
+ .opmode = { 0x0000, 3, 0, 5, 1 },
+ .cp_det = { 0x00c0, 24, 24, 0, 1 },
+ .dcp_det = { 0x00c0, 23, 23, 0, 1 },
+ .dp_det = { 0x00c0, 25, 25, 0, 1 },
+ .idm_sink_en = { 0x0008, 8, 8, 0, 1 },
+ .idp_sink_en = { 0x0008, 7, 7, 0, 1 },
+ .idp_src_en = { 0x0008, 9, 9, 0, 1 },
+ .rdm_pdwn_en = { 0x0008, 10, 10, 0, 1 },
+ .vdm_src_en = { 0x0008, 12, 12, 0, 1 },
+ .vdp_src_en = { 0x0008, 11, 11, 0, 1 },
+ },
+ },
+ {
+ .reg = 0xfe8b0000,
+ .num_ports = 2,
+ .clkout_ctl = { 0x0008, 4, 4, 1, 0 },
+ .port_cfgs = {
+ [USB2PHY_PORT_OTG] = {
+ .phy_sus = { 0x0000, 8, 0, 0x1d2, 0x1d1 },
+ .ls_det_en = { 0x0080, 0, 0, 0, 1 },
+ .ls_det_st = { 0x0084, 0, 0, 0, 1 },
+ .ls_det_clr = { 0x0088, 0, 0, 0, 1 },
+ .utmi_ls = { 0x00c0, 5, 4, 0, 1 },
+ .utmi_hstdet = { 0x00c0, 7, 7, 0, 1 }
+ },
+ [USB2PHY_PORT_HOST] = {
+ .phy_sus = { 0x0004, 8, 0, 0x1d2, 0x1d1 },
+ .ls_det_en = { 0x0080, 1, 1, 0, 1 },
+ .ls_det_st = { 0x0084, 1, 1, 0, 1 },
+ .ls_det_clr = { 0x0088, 1, 1, 0, 1 },
+ .utmi_ls = { 0x00c0, 17, 16, 0, 1 },
+ .utmi_hstdet = { 0x00c0, 19, 19, 0, 1 }
+ }
+ },
+ },
+ { /* sentinel */ }
+};
+
static const struct rockchip_usb2phy_cfg rv1108_phy_cfgs[] = {
{
.reg = 0x100,
@@ -1553,6 +1617,7 @@ static const struct of_device_id rockchip_usb2phy_dt_match[] = {
{ .compatible = "rockchip,rk3328-usb2phy", .data = &rk3328_phy_cfgs },
{ .compatible = "rockchip,rk3366-usb2phy", .data = &rk3366_phy_cfgs },
{ .compatible = "rockchip,rk3399-usb2phy", .data = &rk3399_phy_cfgs },
+ { .compatible = "rockchip,rk3568-usb2phy", .data = &rk3568_phy_cfgs },
{ .compatible = "rockchip,rv1108-usb2phy", .data = &rv1108_phy_cfgs },
{}
};
--
2.25.1
_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel
WARNING: multiple messages have this Message-ID (diff)
From: Peter Geis <pgwipeout@gmail.com>
To: Kishon Vijay Abraham I <kishon@ti.com>,
Vinod Koul <vkoul@kernel.org>, Heiko Stuebner <heiko@sntech.de>
Cc: Peter Geis <pgwipeout@gmail.com>,
Michael Riesch <michael.riesch@wolfvision.net>,
linux-phy@lists.infradead.org,
linux-arm-kernel@lists.infradead.org,
linux-rockchip@lists.infradead.org, linux-kernel@vger.kernel.org
Subject: [PATCH v3 6/8] phy: phy-rockchip-inno-usb2: add rk3568 support
Date: Wed, 15 Dec 2021 16:02:50 -0500 [thread overview]
Message-ID: <20211215210252.120923-7-pgwipeout@gmail.com> (raw)
In-Reply-To: <20211215210252.120923-1-pgwipeout@gmail.com>
The rk3568 usb2phy is a standalone device with a single muxed interrupt.
Add support for the registers to the usb2phy driver.
Signed-off-by: Peter Geis <pgwipeout@gmail.com>
Tested-by: Michael Riesch <michael.riesch@wolfvision.net>
---
drivers/phy/rockchip/phy-rockchip-inno-usb2.c | 65 +++++++++++++++++++
1 file changed, 65 insertions(+)
diff --git a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
index 285958fdab38..bdc5a861891c 100644
--- a/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
+++ b/drivers/phy/rockchip/phy-rockchip-inno-usb2.c
@@ -1093,6 +1093,7 @@ static int rockchip_usb2phy_otg_port_init(struct rockchip_usb2phy *rphy,
if (ret) {
dev_err(rphy->dev, "failed to init irq for host port\n");
goto out;
+ }
if (!IS_ERR(rphy->edev)) {
rport->event_nb.notifier_call = rockchip_otg_event;
@@ -1504,6 +1505,69 @@ static const struct rockchip_usb2phy_cfg rk3399_phy_cfgs[] = {
{ /* sentinel */ }
};
+static const struct rockchip_usb2phy_cfg rk3568_phy_cfgs[] = {
+ {
+ .reg = 0xfe8a0000,
+ .num_ports = 2,
+ .clkout_ctl = { 0x0008, 4, 4, 1, 0 },
+ .port_cfgs = {
+ [USB2PHY_PORT_OTG] = {
+ .phy_sus = { 0x0000, 8, 0, 0, 0x1d1 },
+ .bvalid_det_en = { 0x0080, 2, 2, 0, 1 },
+ .bvalid_det_st = { 0x0084, 2, 2, 0, 1 },
+ .bvalid_det_clr = { 0x0088, 2, 2, 0, 1 },
+ .utmi_avalid = { 0x00c0, 10, 10, 0, 1 },
+ .utmi_bvalid = { 0x00c0, 9, 9, 0, 1 },
+ },
+ [USB2PHY_PORT_HOST] = {
+ /* Select suspend control from controller */
+ .phy_sus = { 0x0004, 8, 0, 0x1d2, 0x1d2 },
+ .ls_det_en = { 0x0080, 1, 1, 0, 1 },
+ .ls_det_st = { 0x0084, 1, 1, 0, 1 },
+ .ls_det_clr = { 0x0088, 1, 1, 0, 1 },
+ .utmi_ls = { 0x00c0, 17, 16, 0, 1 },
+ .utmi_hstdet = { 0x00c0, 19, 19, 0, 1 }
+ }
+ },
+ .chg_det = {
+ .opmode = { 0x0000, 3, 0, 5, 1 },
+ .cp_det = { 0x00c0, 24, 24, 0, 1 },
+ .dcp_det = { 0x00c0, 23, 23, 0, 1 },
+ .dp_det = { 0x00c0, 25, 25, 0, 1 },
+ .idm_sink_en = { 0x0008, 8, 8, 0, 1 },
+ .idp_sink_en = { 0x0008, 7, 7, 0, 1 },
+ .idp_src_en = { 0x0008, 9, 9, 0, 1 },
+ .rdm_pdwn_en = { 0x0008, 10, 10, 0, 1 },
+ .vdm_src_en = { 0x0008, 12, 12, 0, 1 },
+ .vdp_src_en = { 0x0008, 11, 11, 0, 1 },
+ },
+ },
+ {
+ .reg = 0xfe8b0000,
+ .num_ports = 2,
+ .clkout_ctl = { 0x0008, 4, 4, 1, 0 },
+ .port_cfgs = {
+ [USB2PHY_PORT_OTG] = {
+ .phy_sus = { 0x0000, 8, 0, 0x1d2, 0x1d1 },
+ .ls_det_en = { 0x0080, 0, 0, 0, 1 },
+ .ls_det_st = { 0x0084, 0, 0, 0, 1 },
+ .ls_det_clr = { 0x0088, 0, 0, 0, 1 },
+ .utmi_ls = { 0x00c0, 5, 4, 0, 1 },
+ .utmi_hstdet = { 0x00c0, 7, 7, 0, 1 }
+ },
+ [USB2PHY_PORT_HOST] = {
+ .phy_sus = { 0x0004, 8, 0, 0x1d2, 0x1d1 },
+ .ls_det_en = { 0x0080, 1, 1, 0, 1 },
+ .ls_det_st = { 0x0084, 1, 1, 0, 1 },
+ .ls_det_clr = { 0x0088, 1, 1, 0, 1 },
+ .utmi_ls = { 0x00c0, 17, 16, 0, 1 },
+ .utmi_hstdet = { 0x00c0, 19, 19, 0, 1 }
+ }
+ },
+ },
+ { /* sentinel */ }
+};
+
static const struct rockchip_usb2phy_cfg rv1108_phy_cfgs[] = {
{
.reg = 0x100,
@@ -1553,6 +1617,7 @@ static const struct of_device_id rockchip_usb2phy_dt_match[] = {
{ .compatible = "rockchip,rk3328-usb2phy", .data = &rk3328_phy_cfgs },
{ .compatible = "rockchip,rk3366-usb2phy", .data = &rk3366_phy_cfgs },
{ .compatible = "rockchip,rk3399-usb2phy", .data = &rk3399_phy_cfgs },
+ { .compatible = "rockchip,rk3568-usb2phy", .data = &rk3568_phy_cfgs },
{ .compatible = "rockchip,rv1108-usb2phy", .data = &rv1108_phy_cfgs },
{}
};
--
2.25.1
next prev parent reply other threads:[~2021-12-15 21:04 UTC|newest]
Thread overview: 45+ messages / expand[flat|nested] mbox.gz Atom feed top
2021-12-15 21:02 [PATCH v3 0/8] phy-rockchip-inno-usb2: support rk356x usb2phy Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-15 21:02 ` [PATCH v3 1/8] dt-bindings: soc: rockchip: add rk3568-usb2phy-grf Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-15 21:02 ` [PATCH v3 2/8] dt-bindings: phy: phy-rockchip-inno-usb2: add rk3568 documentation Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-16 20:31 ` Rob Herring
2021-12-16 20:31 ` Rob Herring
2021-12-16 20:31 ` Rob Herring
2021-12-16 20:31 ` Rob Herring
2021-12-15 21:02 ` [PATCH v3 3/8] phy: phy-rockchip-inno-usb2: support #address_cells = 2 Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-15 21:02 ` [PATCH v3 4/8] phy: phy-rockchip-inno-usb2: support standalone phy nodes Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-15 21:02 ` [PATCH v3 5/8] phy: phy-rockchip-inno-usb2: support muxed interrupts Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-15 21:02 ` Peter Geis [this message]
2021-12-15 21:02 ` [PATCH v3 6/8] phy: phy-rockchip-inno-usb2: add rk3568 support Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-15 21:02 ` [PATCH v3 7/8] arm64: dts: rockchip: add usb2 nodes to rk3568 device tree Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-15 21:02 ` [PATCH v3 8/8] arm64: dts: rockchip: add Quartz64-A usb2 support Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-15 21:02 ` Peter Geis
2021-12-23 11:25 ` [PATCH v3 0/8] phy-rockchip-inno-usb2: support rk356x usb2phy Vinod Koul
2021-12-23 11:25 ` Vinod Koul
2021-12-23 11:25 ` Vinod Koul
2021-12-23 11:25 ` Vinod Koul
2021-12-28 0:48 ` (subset) " Heiko Stuebner
2021-12-28 0:48 ` Heiko Stuebner
2021-12-28 0:48 ` Heiko Stuebner
2021-12-28 0:48 ` Heiko Stuebner
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20211215210252.120923-7-pgwipeout@gmail.com \
--to=pgwipeout@gmail.com \
--cc=heiko@sntech.de \
--cc=kishon@ti.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=linux-rockchip@lists.infradead.org \
--cc=michael.riesch@wolfvision.net \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.