[PATCH] MIPS: rb532: move GPIOD definition into C-files

[Jackie Liu <liu.yun@linux.dev>]

From: Jackie Liu <liuyun01@kylinos.cn>

My kernel robot report build error from drivers/iio/adc/da9150-gpadc.c,

We define GPIOD in rb.h, in fact he should only be used in gpio.c, but
it affects the driver da9150-gpadc.c which goes against the original
intention of the design, just move it to his scope.

At the same time, GPIONMIEN and IMASK6 are not used anywhere, just delete
them.

Suggested-by: Jonathan Cameron <jic23@kernel.org>
Suggested-by: Andy Shevchenko <andy.shevchenko@gmail.com>
Reported-by: k2ci <kernel-bot@kylinos.cn>
Signed-off-by: Jackie Liu <liuyun01@kylinos.cn>
---
 arch/mips/include/asm/mach-rc32434/rb.h | 9 ---------
 arch/mips/rb532/gpio.c                  | 8 ++++++++
 2 files changed, 8 insertions(+), 9 deletions(-)

diff --git a/arch/mips/include/asm/mach-rc32434/rb.h b/arch/mips/include/asm/mach-rc32434/rb.h
index 34d179ca020b..dd9d4b026e62 100644
--- a/arch/mips/include/asm/mach-rc32434/rb.h
+++ b/arch/mips/include/asm/mach-rc32434/rb.h
@@ -29,15 +29,6 @@
 #define DEV3TC		0x01003C
 #define BTCS		0x010040
 #define BTCOMPARE	0x010044
-#define GPIOBASE	0x050000
-/* Offsets relative to GPIOBASE */
-#define GPIOFUNC	0x00
-#define GPIOCFG		0x04
-#define GPIOD		0x08
-#define GPIOILEVEL	0x0C
-#define GPIOISTAT	0x10
-#define GPIONMIEN	0x14
-#define IMASK6		0x38
 #define LO_WPX		(1 << 0)
 #define LO_ALE		(1 << 1)
 #define LO_CLE		(1 << 2)
diff --git a/arch/mips/rb532/gpio.c b/arch/mips/rb532/gpio.c
index 94f02ada4082..43e188d53a49 100644
--- a/arch/mips/rb532/gpio.c
+++ b/arch/mips/rb532/gpio.c
@@ -37,6 +37,14 @@
 #include <asm/mach-rc32434/rb.h>
 #include <asm/mach-rc32434/gpio.h>
 
+#define GPIOBASE	0x050000
+/* Offsets relative to GPIOBASE */
+#define GPIOFUNC	0x00
+#define GPIOCFG		0x04
+#define GPIOD		0x08
+#define GPIOILEVEL	0x0C
+#define GPIOISTAT	0x10
+
 struct rb532_gpio_chip {
 	struct gpio_chip chip;
 	void __iomem	 *regbase;
-- 
2.25.1