From: Peter Maydell <peter.maydell@linaro.org>
To: qemu-devel@nongnu.org
Subject: [PULL 09/28] target/arm: Split out get_phys_addr_with_secure
Date: Mon, 10 Oct 2022 15:27:11 +0100 [thread overview]
Message-ID: <20221010142730.502083-10-peter.maydell@linaro.org> (raw)
In-Reply-To: <20221010142730.502083-1-peter.maydell@linaro.org>
From: Richard Henderson <richard.henderson@linaro.org>
Retain the existing get_phys_addr interface using the security
state derived from mmu_idx. Move the kerneldoc comments to the
header file where they belong.
Reviewed-by: Peter Maydell <peter.maydell@linaro.org>
Signed-off-by: Richard Henderson <richard.henderson@linaro.org>
Message-id: 20221001162318.153420-6-richard.henderson@linaro.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>
---
target/arm/internals.h | 40 ++++++++++++++++++++++++++++++++++++++
target/arm/ptw.c | 44 ++++++++++++++----------------------------
2 files changed, 55 insertions(+), 29 deletions(-)
diff --git a/target/arm/internals.h b/target/arm/internals.h
index 307a5965053..3524d11dc57 100644
--- a/target/arm/internals.h
+++ b/target/arm/internals.h
@@ -1145,6 +1145,46 @@ typedef struct GetPhysAddrResult {
ARMCacheAttrs cacheattrs;
} GetPhysAddrResult;
+/**
+ * get_phys_addr_with_secure: get the physical address for a virtual address
+ * @env: CPUARMState
+ * @address: virtual address to get physical address for
+ * @access_type: 0 for read, 1 for write, 2 for execute
+ * @mmu_idx: MMU index indicating required translation regime
+ * @is_secure: security state for the access
+ * @result: set on translation success.
+ * @fi: set to fault info if the translation fails
+ *
+ * Find the physical address corresponding to the given virtual address,
+ * by doing a translation table walk on MMU based systems or using the
+ * MPU state on MPU based systems.
+ *
+ * Returns false if the translation was successful. Otherwise, phys_ptr, attrs,
+ * prot and page_size may not be filled in, and the populated fsr value provides
+ * information on why the translation aborted, in the format of a
+ * DFSR/IFSR fault register, with the following caveats:
+ * * we honour the short vs long DFSR format differences.
+ * * the WnR bit is never set (the caller must do this).
+ * * for PSMAv5 based systems we don't bother to return a full FSR format
+ * value.
+ */
+bool get_phys_addr_with_secure(CPUARMState *env, target_ulong address,
+ MMUAccessType access_type,
+ ARMMMUIdx mmu_idx, bool is_secure,
+ GetPhysAddrResult *result, ARMMMUFaultInfo *fi)
+ __attribute__((nonnull));
+
+/**
+ * get_phys_addr: get the physical address for a virtual address
+ * @env: CPUARMState
+ * @address: virtual address to get physical address for
+ * @access_type: 0 for read, 1 for write, 2 for execute
+ * @mmu_idx: MMU index indicating required translation regime
+ * @result: set on translation success.
+ * @fi: set to fault info if the translation fails
+ *
+ * Similarly, but use the security regime of @mmu_idx.
+ */
bool get_phys_addr(CPUARMState *env, target_ulong address,
MMUAccessType access_type, ARMMMUIdx mmu_idx,
GetPhysAddrResult *result, ARMMMUFaultInfo *fi)
diff --git a/target/arm/ptw.c b/target/arm/ptw.c
index d789807b086..74dcb843fe2 100644
--- a/target/arm/ptw.c
+++ b/target/arm/ptw.c
@@ -2260,35 +2260,12 @@ static ARMCacheAttrs combine_cacheattrs(CPUARMState *env,
return ret;
}
-/**
- * get_phys_addr - get the physical address for this virtual address
- *
- * Find the physical address corresponding to the given virtual address,
- * by doing a translation table walk on MMU based systems or using the
- * MPU state on MPU based systems.
- *
- * Returns false if the translation was successful. Otherwise, phys_ptr, attrs,
- * prot and page_size may not be filled in, and the populated fsr value provides
- * information on why the translation aborted, in the format of a
- * DFSR/IFSR fault register, with the following caveats:
- * * we honour the short vs long DFSR format differences.
- * * the WnR bit is never set (the caller must do this).
- * * for PSMAv5 based systems we don't bother to return a full FSR format
- * value.
- *
- * @env: CPUARMState
- * @address: virtual address to get physical address for
- * @access_type: 0 for read, 1 for write, 2 for execute
- * @mmu_idx: MMU index indicating required translation regime
- * @result: set on translation success.
- * @fi: set to fault info if the translation fails
- */
-bool get_phys_addr(CPUARMState *env, target_ulong address,
- MMUAccessType access_type, ARMMMUIdx mmu_idx,
- GetPhysAddrResult *result, ARMMMUFaultInfo *fi)
+bool get_phys_addr_with_secure(CPUARMState *env, target_ulong address,
+ MMUAccessType access_type, ARMMMUIdx mmu_idx,
+ bool is_secure, GetPhysAddrResult *result,
+ ARMMMUFaultInfo *fi)
{
ARMMMUIdx s1_mmu_idx = stage_1_mmu_idx(mmu_idx);
- bool is_secure = regime_is_secure(env, mmu_idx);
if (mmu_idx != s1_mmu_idx) {
/*
@@ -2304,8 +2281,8 @@ bool get_phys_addr(CPUARMState *env, target_ulong address,
ARMMMUIdx s2_mmu_idx;
bool is_el0;
- ret = get_phys_addr(env, address, access_type, s1_mmu_idx,
- result, fi);
+ ret = get_phys_addr_with_secure(env, address, access_type,
+ s1_mmu_idx, is_secure, result, fi);
/* If S1 fails or S2 is disabled, return early. */
if (ret || regime_translation_disabled(env, ARMMMUIdx_Stage2,
@@ -2517,6 +2494,15 @@ bool get_phys_addr(CPUARMState *env, target_ulong address,
}
}
+bool get_phys_addr(CPUARMState *env, target_ulong address,
+ MMUAccessType access_type, ARMMMUIdx mmu_idx,
+ GetPhysAddrResult *result, ARMMMUFaultInfo *fi)
+{
+ return get_phys_addr_with_secure(env, address, access_type, mmu_idx,
+ regime_is_secure(env, mmu_idx),
+ result, fi);
+}
+
hwaddr arm_cpu_get_phys_page_attrs_debug(CPUState *cs, vaddr addr,
MemTxAttrs *attrs)
{
--
2.25.1
next prev parent reply other threads:[~2022-10-10 14:47 UTC|newest]
Thread overview: 30+ messages / expand[flat|nested] mbox.gz Atom feed top
2022-10-10 14:27 [PULL 00/28] target-arm queue Peter Maydell
2022-10-10 14:27 ` [PULL 01/28] target/arm/kvm: Retry KVM_CREATE_VM call if it fails EINTR Peter Maydell
2022-10-10 14:27 ` [PULL 02/28] target/arm: allow setting SCR_EL3.EnTP2 when FEAT_SME is implemented Peter Maydell
2022-10-10 14:27 ` [PULL 03/28] docs/nuvoton: Update URL for images Peter Maydell
2022-10-10 14:27 ` [PULL 04/28] target/arm: Split s2walk_secure from ipa_secure in get_phys_addr Peter Maydell
2022-10-10 14:27 ` [PULL 05/28] target/arm: Make the final stage1+2 write to secure be unconditional Peter Maydell
2022-10-10 14:27 ` [PULL 06/28] target/arm: Add is_secure parameter to get_phys_addr_lpae Peter Maydell
2022-10-10 14:27 ` [PULL 07/28] target/arm: Fix S2 disabled check in S1_ptw_translate Peter Maydell
2022-10-10 14:27 ` [PULL 08/28] target/arm: Add is_secure parameter to regime_translation_disabled Peter Maydell
2022-10-10 14:27 ` Peter Maydell [this message]
2022-10-10 14:27 ` [PULL 10/28] target/arm: Add is_secure parameter to v7m_read_half_insn Peter Maydell
2022-10-10 14:27 ` [PULL 11/28] target/arm: Add TBFLAG_M32.SECURE Peter Maydell
2022-10-10 14:27 ` [PULL 12/28] target/arm: Merge regime_is_secure into get_phys_addr Peter Maydell
2022-10-10 14:27 ` [PULL 13/28] target/arm: Add is_secure parameter to do_ats_write Peter Maydell
2022-10-10 14:27 ` [PULL 14/28] target/arm: Fold secure and non-secure a-profile mmu indexes Peter Maydell
2022-10-10 14:27 ` [PULL 15/28] target/arm: Reorg regime_translation_disabled Peter Maydell
2022-10-10 14:27 ` [PULL 16/28] target/arm: Drop secure check for HCR.TGE vs SCTLR_EL1.M Peter Maydell
2022-10-10 14:27 ` [PULL 17/28] target/arm: Introduce arm_hcr_el2_eff_secstate Peter Maydell
2022-10-10 14:27 ` [PULL 18/28] target/arm: Hoist read of *is_secure in S1_ptw_translate Peter Maydell
2022-10-10 14:27 ` [PULL 19/28] target/arm: Remove env argument from combined_attrs_fwb Peter Maydell
2022-10-10 14:27 ` [PULL 20/28] target/arm: Pass HCR to attribute subroutines Peter Maydell
2022-10-10 14:27 ` [PULL 21/28] target/arm: Fix ATS12NSO* from S PL1 Peter Maydell
2022-10-10 14:27 ` [PULL 22/28] target/arm: Split out get_phys_addr_disabled Peter Maydell
2022-10-10 14:27 ` [PULL 23/28] target/arm: Fix cacheattr in get_phys_addr_disabled Peter Maydell
2022-10-10 14:27 ` [PULL 24/28] target/arm: Use tlb_set_page_full Peter Maydell
2022-10-10 14:27 ` [PULL 25/28] hw/arm/boot: set CPTR_EL3.ESM and SCR_EL3.EnTP2 when booting Linux with EL3 Peter Maydell
2022-10-10 14:27 ` [PULL 26/28] target/arm: Don't allow guest to use unimplemented granule sizes Peter Maydell
2022-10-10 14:27 ` [PULL 27/28] target/arm: Use ARMGranuleSize in ARMVAParameters Peter Maydell
2022-10-10 14:27 ` [PULL 28/28] docs/system/arm/emulation.rst: Report FEAT_GTG support Peter Maydell
2022-10-12 21:25 ` [PULL 00/28] target-arm queue Stefan Hajnoczi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20221010142730.502083-10-peter.maydell@linaro.org \
--to=peter.maydell@linaro.org \
--cc=qemu-devel@nongnu.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.