All of lore.kernel.org
 help / color / mirror / Atom feed
From: Xingyu Wu <xingyu.wu@starfivetech.com>
To: <linux-riscv@lists.infradead.org>, <devicetree@vger.kernel.org>,
	"Michael Turquette" <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	"Rob Herring" <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Conor Dooley <conor@kernel.org>,
	Emil Renner Berthing <emil.renner.berthing@canonical.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Hal Feng <hal.feng@starfivetech.com>,
	Xingyu Wu <xingyu.wu@starfivetech.com>,
	"William Qiu" <william.qiu@starfivetech.com>,
	<linux-kernel@vger.kernel.org>, <linux-clk@vger.kernel.org>
Subject: [PATCH v7 1/7] dt-bindings: clock: Add StarFive JH7110 PLL clock generator
Date: Mon, 17 Jul 2023 10:30:34 +0800	[thread overview]
Message-ID: <20230717023040.78860-2-xingyu.wu@starfivetech.com> (raw)
In-Reply-To: <20230717023040.78860-1-xingyu.wu@starfivetech.com>

Add bindings for the PLL clock generator on the JH7110 RISC-V SoC.

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
---
 .../bindings/clock/starfive,jh7110-pll.yaml   | 46 +++++++++++++++++++
 .../dt-bindings/clock/starfive,jh7110-crg.h   |  6 +++
 2 files changed, 52 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml

diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml
new file mode 100644
index 000000000000..be8300ce86d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jh7110-pll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 PLL Clock Generator
+
+description:
+  These PLLs are high speed, low jitter frequency synthesizers in the JH7110.
+  Each PLL works in integer mode or fraction mode, with configuration
+  registers in the sys syscon. So the PLLs node should be a child of
+  SYS-SYSCON node.
+  The formula for calculating frequency is
+  Fvco = Fref * (NI + NF) / M / Q1
+
+maintainers:
+  - Xingyu Wu <xingyu.wu@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jh7110-pll
+
+  clocks:
+    maxItems: 1
+    description: Main Oscillator (24 MHz)
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices.
+
+required:
+  - compatible
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller {
+      compatible = "starfive,jh7110-pll";
+      clocks = <&osc>;
+      #clock-cells = <1>;
+    };
diff --git a/include/dt-bindings/clock/starfive,jh7110-crg.h b/include/dt-bindings/clock/starfive,jh7110-crg.h
index 06257bfd9ac1..3fb5e31c3be4 100644
--- a/include/dt-bindings/clock/starfive,jh7110-crg.h
+++ b/include/dt-bindings/clock/starfive,jh7110-crg.h
@@ -6,6 +6,12 @@
 #ifndef __DT_BINDINGS_CLOCK_STARFIVE_JH7110_CRG_H__
 #define __DT_BINDINGS_CLOCK_STARFIVE_JH7110_CRG_H__
 
+/* PLL clocks */
+#define JH7110_PLLCLK_PLL0_OUT			0
+#define JH7110_PLLCLK_PLL1_OUT			1
+#define JH7110_PLLCLK_PLL2_OUT			2
+#define JH7110_PLLCLK_END			3
+
 /* SYSCRG clocks */
 #define JH7110_SYSCLK_CPU_ROOT			0
 #define JH7110_SYSCLK_CPU_CORE			1
-- 
2.25.1


WARNING: multiple messages have this Message-ID (diff)
From: Xingyu Wu <xingyu.wu@starfivetech.com>
To: <linux-riscv@lists.infradead.org>, <devicetree@vger.kernel.org>,
	"Michael Turquette" <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	"Rob Herring" <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Conor Dooley <conor@kernel.org>,
	Emil Renner Berthing <emil.renner.berthing@canonical.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Hal Feng <hal.feng@starfivetech.com>,
	Xingyu Wu <xingyu.wu@starfivetech.com>,
	"William Qiu" <william.qiu@starfivetech.com>,
	<linux-kernel@vger.kernel.org>, <linux-clk@vger.kernel.org>
Subject: [PATCH v7 1/7] dt-bindings: clock: Add StarFive JH7110 PLL clock generator
Date: Mon, 17 Jul 2023 10:30:34 +0800	[thread overview]
Message-ID: <20230717023040.78860-2-xingyu.wu@starfivetech.com> (raw)
In-Reply-To: <20230717023040.78860-1-xingyu.wu@starfivetech.com>

Add bindings for the PLL clock generator on the JH7110 RISC-V SoC.

Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Reviewed-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
---
 .../bindings/clock/starfive,jh7110-pll.yaml   | 46 +++++++++++++++++++
 .../dt-bindings/clock/starfive,jh7110-crg.h   |  6 +++
 2 files changed, 52 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml

diff --git a/Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml b/Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml
new file mode 100644
index 000000000000..be8300ce86d0
--- /dev/null
+++ b/Documentation/devicetree/bindings/clock/starfive,jh7110-pll.yaml
@@ -0,0 +1,46 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/clock/starfive,jh7110-pll.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: StarFive JH7110 PLL Clock Generator
+
+description:
+  These PLLs are high speed, low jitter frequency synthesizers in the JH7110.
+  Each PLL works in integer mode or fraction mode, with configuration
+  registers in the sys syscon. So the PLLs node should be a child of
+  SYS-SYSCON node.
+  The formula for calculating frequency is
+  Fvco = Fref * (NI + NF) / M / Q1
+
+maintainers:
+  - Xingyu Wu <xingyu.wu@starfivetech.com>
+
+properties:
+  compatible:
+    const: starfive,jh7110-pll
+
+  clocks:
+    maxItems: 1
+    description: Main Oscillator (24 MHz)
+
+  '#clock-cells':
+    const: 1
+    description:
+      See <dt-bindings/clock/starfive,jh7110-crg.h> for valid indices.
+
+required:
+  - compatible
+  - clocks
+  - '#clock-cells'
+
+additionalProperties: false
+
+examples:
+  - |
+    clock-controller {
+      compatible = "starfive,jh7110-pll";
+      clocks = <&osc>;
+      #clock-cells = <1>;
+    };
diff --git a/include/dt-bindings/clock/starfive,jh7110-crg.h b/include/dt-bindings/clock/starfive,jh7110-crg.h
index 06257bfd9ac1..3fb5e31c3be4 100644
--- a/include/dt-bindings/clock/starfive,jh7110-crg.h
+++ b/include/dt-bindings/clock/starfive,jh7110-crg.h
@@ -6,6 +6,12 @@
 #ifndef __DT_BINDINGS_CLOCK_STARFIVE_JH7110_CRG_H__
 #define __DT_BINDINGS_CLOCK_STARFIVE_JH7110_CRG_H__
 
+/* PLL clocks */
+#define JH7110_PLLCLK_PLL0_OUT			0
+#define JH7110_PLLCLK_PLL1_OUT			1
+#define JH7110_PLLCLK_PLL2_OUT			2
+#define JH7110_PLLCLK_END			3
+
 /* SYSCRG clocks */
 #define JH7110_SYSCLK_CPU_ROOT			0
 #define JH7110_SYSCLK_CPU_CORE			1
-- 
2.25.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

  reply	other threads:[~2023-07-17  2:30 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-07-17  2:30 [PATCH v7 0/7] Add PLL clocks driver and syscon for StarFive JH7110 SoC Xingyu Wu
2023-07-17  2:30 ` Xingyu Wu
2023-07-17  2:30 ` Xingyu Wu [this message]
2023-07-17  2:30   ` [PATCH v7 1/7] dt-bindings: clock: Add StarFive JH7110 PLL clock generator Xingyu Wu
2023-07-19 15:45   ` Emil Renner Berthing
2023-07-19 15:45     ` Emil Renner Berthing
2023-07-17  2:30 ` [PATCH v7 2/7] dt-bindings: soc: starfive: Add StarFive syscon module Xingyu Wu
2023-07-17  2:30   ` Xingyu Wu
2023-07-17  2:30 ` [PATCH v7 3/7] dt-bindings: clock: jh7110-syscrg: Add PLL clock inputs Xingyu Wu
2023-07-17  2:30   ` Xingyu Wu
2023-07-17  2:30 ` [PATCH v7 4/7] clk: starfive: Add StarFive JH7110 PLL clock driver Xingyu Wu
2023-07-17  2:30   ` Xingyu Wu
2023-07-17  2:30 ` [PATCH v7 5/7] clk: starfive: jh7110-sys: Add PLL clocks source from DTS Xingyu Wu
2023-07-17  2:30   ` Xingyu Wu
2023-07-19 15:49   ` Emil Renner Berthing
2023-07-19 15:49     ` Emil Renner Berthing
2023-07-17  2:30 ` [PATCH v7 6/7] riscv: dts: starfive: jh7110: Add syscon nodes Xingyu Wu
2023-07-17  2:30   ` Xingyu Wu
2023-07-17  2:30 ` [PATCH v7 7/7] riscv: dts: starfive: jh7110: Add PLL clocks source in SYSCRG node Xingyu Wu
2023-07-17  2:30   ` Xingyu Wu
2023-07-17 18:14 ` [PATCH v7 0/7] Add PLL clocks driver and syscon for StarFive JH7110 SoC Conor Dooley
2023-07-17 18:14   ` Conor Dooley
2023-07-18  5:48   ` Xingyu Wu
2023-07-18  5:48     ` Xingyu Wu
2023-07-20 16:29 ` (subset) " Conor Dooley
2023-07-20 16:29   ` Conor Dooley

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230717023040.78860-2-xingyu.wu@starfivetech.com \
    --to=xingyu.wu@starfivetech.com \
    --cc=aou@eecs.berkeley.edu \
    --cc=conor@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=emil.renner.berthing@canonical.com \
    --cc=hal.feng@starfivetech.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=mturquette@baylibre.com \
    --cc=p.zabel@pengutronix.de \
    --cc=palmer@dabbelt.com \
    --cc=paul.walmsley@sifive.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=william.qiu@starfivetech.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.