All of lore.kernel.org
 help / color / mirror / Atom feed
From: Xingyu Wu <xingyu.wu@starfivetech.com>
To: <linux-riscv@lists.infradead.org>, <devicetree@vger.kernel.org>,
	"Michael Turquette" <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	"Rob Herring" <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Conor Dooley <conor@kernel.org>,
	Emil Renner Berthing <emil.renner.berthing@canonical.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Hal Feng <hal.feng@starfivetech.com>,
	Xingyu Wu <xingyu.wu@starfivetech.com>,
	"William Qiu" <william.qiu@starfivetech.com>,
	<linux-kernel@vger.kernel.org>, <linux-clk@vger.kernel.org>
Subject: [PATCH v7 6/7] riscv: dts: starfive: jh7110: Add syscon nodes
Date: Mon, 17 Jul 2023 10:30:39 +0800	[thread overview]
Message-ID: <20230717023040.78860-7-xingyu.wu@starfivetech.com> (raw)
In-Reply-To: <20230717023040.78860-1-xingyu.wu@starfivetech.com>

From: William Qiu <william.qiu@starfivetech.com>

Add stg_syscon/sys_syscon/aon_syscon/PLL nodes for JH7110 SoC.

Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Co-developed-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Signed-off-by: William Qiu <william.qiu@starfivetech.com>
---
 arch/riscv/boot/dts/starfive/jh7110.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index ec2e70011a73..c49f5570625c 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -386,6 +386,11 @@ i2c2: i2c@10050000 {
 			status = "disabled";
 		};
 
+		stg_syscon: syscon@10240000 {
+			compatible = "starfive,jh7110-stg-syscon", "syscon";
+			reg = <0x0 0x10240000 0x0 0x1000>;
+		};
+
 		uart3: serial@12000000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x12000000 0x0 0x10000>;
@@ -490,6 +495,17 @@ syscrg: clock-controller@13020000 {
 			#reset-cells = <1>;
 		};
 
+		sys_syscon: syscon@13030000 {
+			compatible = "starfive,jh7110-sys-syscon", "syscon", "simple-mfd";
+			reg = <0x0 0x13030000 0x0 0x1000>;
+
+			pllclk: clock-controller {
+				compatible = "starfive,jh7110-pll";
+				clocks = <&osc>;
+				#clock-cells = <1>;
+			};
+		};
+
 		sysgpio: pinctrl@13040000 {
 			compatible = "starfive,jh7110-sys-pinctrl";
 			reg = <0x0 0x13040000 0x0 0x10000>;
@@ -529,6 +545,12 @@ aoncrg: clock-controller@17000000 {
 			#reset-cells = <1>;
 		};
 
+		aon_syscon: syscon@17010000 {
+			compatible = "starfive,jh7110-aon-syscon", "syscon";
+			reg = <0x0 0x17010000 0x0 0x1000>;
+			#power-domain-cells = <1>;
+		};
+
 		aongpio: pinctrl@17020000 {
 			compatible = "starfive,jh7110-aon-pinctrl";
 			reg = <0x0 0x17020000 0x0 0x10000>;
-- 
2.25.1


WARNING: multiple messages have this Message-ID (diff)
From: Xingyu Wu <xingyu.wu@starfivetech.com>
To: <linux-riscv@lists.infradead.org>, <devicetree@vger.kernel.org>,
	"Michael Turquette" <mturquette@baylibre.com>,
	Stephen Boyd <sboyd@kernel.org>,
	"Rob Herring" <robh+dt@kernel.org>,
	Krzysztof Kozlowski <krzysztof.kozlowski+dt@linaro.org>,
	Philipp Zabel <p.zabel@pengutronix.de>,
	Conor Dooley <conor@kernel.org>,
	Emil Renner Berthing <emil.renner.berthing@canonical.com>
Cc: Paul Walmsley <paul.walmsley@sifive.com>,
	Palmer Dabbelt <palmer@dabbelt.com>,
	Albert Ou <aou@eecs.berkeley.edu>,
	Hal Feng <hal.feng@starfivetech.com>,
	Xingyu Wu <xingyu.wu@starfivetech.com>,
	"William Qiu" <william.qiu@starfivetech.com>,
	<linux-kernel@vger.kernel.org>, <linux-clk@vger.kernel.org>
Subject: [PATCH v7 6/7] riscv: dts: starfive: jh7110: Add syscon nodes
Date: Mon, 17 Jul 2023 10:30:39 +0800	[thread overview]
Message-ID: <20230717023040.78860-7-xingyu.wu@starfivetech.com> (raw)
In-Reply-To: <20230717023040.78860-1-xingyu.wu@starfivetech.com>

From: William Qiu <william.qiu@starfivetech.com>

Add stg_syscon/sys_syscon/aon_syscon/PLL nodes for JH7110 SoC.

Reviewed-by: Emil Renner Berthing <emil.renner.berthing@canonical.com>
Reviewed-by: Conor Dooley <conor.dooley@microchip.com>
Co-developed-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Signed-off-by: Xingyu Wu <xingyu.wu@starfivetech.com>
Signed-off-by: William Qiu <william.qiu@starfivetech.com>
---
 arch/riscv/boot/dts/starfive/jh7110.dtsi | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/arch/riscv/boot/dts/starfive/jh7110.dtsi b/arch/riscv/boot/dts/starfive/jh7110.dtsi
index ec2e70011a73..c49f5570625c 100644
--- a/arch/riscv/boot/dts/starfive/jh7110.dtsi
+++ b/arch/riscv/boot/dts/starfive/jh7110.dtsi
@@ -386,6 +386,11 @@ i2c2: i2c@10050000 {
 			status = "disabled";
 		};
 
+		stg_syscon: syscon@10240000 {
+			compatible = "starfive,jh7110-stg-syscon", "syscon";
+			reg = <0x0 0x10240000 0x0 0x1000>;
+		};
+
 		uart3: serial@12000000 {
 			compatible = "snps,dw-apb-uart";
 			reg = <0x0 0x12000000 0x0 0x10000>;
@@ -490,6 +495,17 @@ syscrg: clock-controller@13020000 {
 			#reset-cells = <1>;
 		};
 
+		sys_syscon: syscon@13030000 {
+			compatible = "starfive,jh7110-sys-syscon", "syscon", "simple-mfd";
+			reg = <0x0 0x13030000 0x0 0x1000>;
+
+			pllclk: clock-controller {
+				compatible = "starfive,jh7110-pll";
+				clocks = <&osc>;
+				#clock-cells = <1>;
+			};
+		};
+
 		sysgpio: pinctrl@13040000 {
 			compatible = "starfive,jh7110-sys-pinctrl";
 			reg = <0x0 0x13040000 0x0 0x10000>;
@@ -529,6 +545,12 @@ aoncrg: clock-controller@17000000 {
 			#reset-cells = <1>;
 		};
 
+		aon_syscon: syscon@17010000 {
+			compatible = "starfive,jh7110-aon-syscon", "syscon";
+			reg = <0x0 0x17010000 0x0 0x1000>;
+			#power-domain-cells = <1>;
+		};
+
 		aongpio: pinctrl@17020000 {
 			compatible = "starfive,jh7110-aon-pinctrl";
 			reg = <0x0 0x17020000 0x0 0x10000>;
-- 
2.25.1


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv

  parent reply	other threads:[~2023-07-17  2:31 UTC|newest]

Thread overview: 26+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2023-07-17  2:30 [PATCH v7 0/7] Add PLL clocks driver and syscon for StarFive JH7110 SoC Xingyu Wu
2023-07-17  2:30 ` Xingyu Wu
2023-07-17  2:30 ` [PATCH v7 1/7] dt-bindings: clock: Add StarFive JH7110 PLL clock generator Xingyu Wu
2023-07-17  2:30   ` Xingyu Wu
2023-07-19 15:45   ` Emil Renner Berthing
2023-07-19 15:45     ` Emil Renner Berthing
2023-07-17  2:30 ` [PATCH v7 2/7] dt-bindings: soc: starfive: Add StarFive syscon module Xingyu Wu
2023-07-17  2:30   ` Xingyu Wu
2023-07-17  2:30 ` [PATCH v7 3/7] dt-bindings: clock: jh7110-syscrg: Add PLL clock inputs Xingyu Wu
2023-07-17  2:30   ` Xingyu Wu
2023-07-17  2:30 ` [PATCH v7 4/7] clk: starfive: Add StarFive JH7110 PLL clock driver Xingyu Wu
2023-07-17  2:30   ` Xingyu Wu
2023-07-17  2:30 ` [PATCH v7 5/7] clk: starfive: jh7110-sys: Add PLL clocks source from DTS Xingyu Wu
2023-07-17  2:30   ` Xingyu Wu
2023-07-19 15:49   ` Emil Renner Berthing
2023-07-19 15:49     ` Emil Renner Berthing
2023-07-17  2:30 ` Xingyu Wu [this message]
2023-07-17  2:30   ` [PATCH v7 6/7] riscv: dts: starfive: jh7110: Add syscon nodes Xingyu Wu
2023-07-17  2:30 ` [PATCH v7 7/7] riscv: dts: starfive: jh7110: Add PLL clocks source in SYSCRG node Xingyu Wu
2023-07-17  2:30   ` Xingyu Wu
2023-07-17 18:14 ` [PATCH v7 0/7] Add PLL clocks driver and syscon for StarFive JH7110 SoC Conor Dooley
2023-07-17 18:14   ` Conor Dooley
2023-07-18  5:48   ` Xingyu Wu
2023-07-18  5:48     ` Xingyu Wu
2023-07-20 16:29 ` (subset) " Conor Dooley
2023-07-20 16:29   ` Conor Dooley

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20230717023040.78860-7-xingyu.wu@starfivetech.com \
    --to=xingyu.wu@starfivetech.com \
    --cc=aou@eecs.berkeley.edu \
    --cc=conor@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=emil.renner.berthing@canonical.com \
    --cc=hal.feng@starfivetech.com \
    --cc=krzysztof.kozlowski+dt@linaro.org \
    --cc=linux-clk@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-riscv@lists.infradead.org \
    --cc=mturquette@baylibre.com \
    --cc=p.zabel@pengutronix.de \
    --cc=palmer@dabbelt.com \
    --cc=paul.walmsley@sifive.com \
    --cc=robh+dt@kernel.org \
    --cc=sboyd@kernel.org \
    --cc=william.qiu@starfivetech.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body. 
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.