[PATCH] app/testpmd: add flush multicast MAC address command

[PATCH] app/testpmd: add flush multicast MAC address command

[Dengdui Huang]

Add command to flush multicast MAC address
Usage:
    mcast_addr flush <port_id> :
    flush multicast MAC address on port_id

Signed-off-by: Dengdui Huang <huangdengdui@huawei.com>
---
 app/test-pmd/cmdline.c                      | 43 +++++++++++++++++++++
 app/test-pmd/config.c                       | 18 +++++++++
 app/test-pmd/testpmd.h                      |  1 +
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |  8 ++++
 4 files changed, 70 insertions(+)

diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index 0d0723f659..2d9d925776 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -494,6 +494,9 @@ static void cmd_help_long_parsed(void *parsed_result,
 			"mac_addr remove (port_id) (XX:XX:XX:XX:XX:XX)\n"
 			"    Remove a MAC address from port_id.\n\n"
 
+			"mcast_addr flush (port_id)\n"
+			"    To flush the set of multicast addresses.\n\n"
+
 			"mac_addr set (port_id) (XX:XX:XX:XX:XX:XX)\n"
 			"    Set the default MAC address for port_id.\n\n"
 
@@ -8561,6 +8564,45 @@ static cmdline_parse_inst_t cmd_mcast_addr = {
 	},
 };
 
+/* *** FLUSH MULTICAST MAC ADDRESS ON PORT *** */
+struct cmd_mcast_addr_flush_result {
+	cmdline_fixed_string_t mcast_addr_cmd;
+	cmdline_fixed_string_t what;
+	uint16_t port_num;
+};
+
+static void cmd_mcast_addr_flush_parsed(void *parsed_result,
+		__rte_unused struct cmdline *cl,
+		__rte_unused void *data)
+{
+	struct cmd_mcast_addr_flush_result *res = parsed_result;
+
+	mcast_addr_flush(res->port_num);
+}
+
+static cmdline_parse_token_string_t cmd_mcast_addr_flush_cmd =
+	TOKEN_STRING_INITIALIZER(struct cmd_mcast_addr_result,
+				 mcast_addr_cmd, "mcast_addr");
+static cmdline_parse_token_string_t cmd_mcast_addr_flush_what =
+	TOKEN_STRING_INITIALIZER(struct cmd_mcast_addr_result, what,
+				 "flush");
+static cmdline_parse_token_num_t cmd_mcast_addr_flush_portnum =
+	TOKEN_NUM_INITIALIZER(struct cmd_mcast_addr_result, port_num,
+				 RTE_UINT16);
+
+static cmdline_parse_inst_t cmd_mcast_addr_flush = {
+	.f = cmd_mcast_addr_flush_parsed,
+	.data = (void *)0,
+	.help_str = "mcast_addr flush <port_id> : "
+		"flush multicast MAC address on port_id",
+	.tokens = {
+		(void *)&cmd_mcast_addr_flush_cmd,
+		(void *)&cmd_mcast_addr_flush_what,
+		(void *)&cmd_mcast_addr_flush_portnum,
+		NULL,
+	},
+};
+
 /* vf vlan anti spoof configuration */
 
 /* Common result structure for vf vlan anti spoof */
@@ -12929,6 +12971,7 @@ static cmdline_parse_ctx_t builtin_ctx[] = {
 	(cmdline_parse_inst_t *)&cmd_set_port_meter_stats_mask,
 	(cmdline_parse_inst_t *)&cmd_show_port_meter_stats,
 	(cmdline_parse_inst_t *)&cmd_mcast_addr,
+	(cmdline_parse_inst_t *)&cmd_mcast_addr_flush,
 	(cmdline_parse_inst_t *)&cmd_set_vf_vlan_anti_spoof,
 	(cmdline_parse_inst_t *)&cmd_set_vf_mac_anti_spoof,
 	(cmdline_parse_inst_t *)&cmd_set_vf_vlan_stripq,
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 11f3a22048..d66d1db37c 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -6802,6 +6802,24 @@ mcast_addr_remove(portid_t port_id, struct rte_ether_addr *mc_addr)
 		mcast_addr_pool_append(port, mc_addr);
 }
 
+void
+mcast_addr_flush(portid_t port_id)
+{
+	int ret;
+
+	if (port_id_is_invalid(port_id, ENABLED_WARN))
+		return;
+
+	ret = rte_eth_dev_set_mc_addr_list(port_id, NULL, 0);
+	if (ret != 0) {
+		fprintf(stderr,
+			"Failed to flush the set of filtered addresses on port %u\n",
+			port_id);
+		return;
+	}
+	mcast_addr_pool_destroy(port_id);
+}
+
 void
 port_dcb_info_display(portid_t port_id)
 {
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index f1df6a8faf..65d3634f6a 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -1176,6 +1176,7 @@ void show_mcast_macs(portid_t port_id);
 /* Functions to manage the set of filtered Multicast MAC addresses */
 void mcast_addr_add(portid_t port_id, struct rte_ether_addr *mc_addr);
 void mcast_addr_remove(portid_t port_id, struct rte_ether_addr *mc_addr);
+void mcast_addr_flush(portid_t port_id);
 void port_dcb_info_display(portid_t port_id);
 
 uint8_t *open_file(const char *file_path, uint32_t *size);
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index a182479ab2..c3ab1507c4 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -1320,6 +1320,14 @@ filtered by port::
 
    testpmd> mcast_addr remove (port_id) (mcast_addr)
 
+mcast_addr flush
+~~~~~~~~~~~~~~~~
+
+To flush the set of multicast addresses
+filtered by port::
+
+   testpmd> mcast_addr flush (port_id)
+
 mac_addr add (for VF)
 ~~~~~~~~~~~~~~~~~~~~~
 
-- 
2.33.0

Re: [PATCH] app/testpmd: add flush multicast MAC address command

[Stephen Hemminger]

On Tue, 1 Aug 2023 10:43:04 +0800
Dengdui Huang <huangdengdui@huawei.com> wrote:

> diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
> index 0d0723f659..2d9d925776 100644
> --- a/app/test-pmd/cmdline.c
> +++ b/app/test-pmd/cmdline.c
> @@ -494,6 +494,9 @@ static void cmd_help_long_parsed(void *parsed_result,
>  			"mac_addr remove (port_id) (XX:XX:XX:XX:XX:XX)\n"
>  			"    Remove a MAC address from port_id.\n\n"
>  
> +			"mcast_addr flush (port_id)\n"
> +			"    To flush the set of multicast addresses.\n\n"
> +
>  			"mac_addr set (port_id) (XX:XX:XX:XX:XX:XX)\n"
>  			"    Set the default MAC address for port_id.\n\n"

Why out this in middle of the mac_addr commands? better to be in logical or alpha order.

Re: [PATCH] app/testpmd: add flush multicast MAC address command

[huangdengdui]

在 2023/8/1 23:18, Stephen Hemminger 写道:
> On Tue, 1 Aug 2023 10:43:04 +0800
> Dengdui Huang <huangdengdui@huawei.com> wrote:
> 
>> diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
>> index 0d0723f659..2d9d925776 100644
>> --- a/app/test-pmd/cmdline.c
>> +++ b/app/test-pmd/cmdline.c
>> @@ -494,6 +494,9 @@ static void cmd_help_long_parsed(void *parsed_result,
>>  			"mac_addr remove (port_id) (XX:XX:XX:XX:XX:XX)\n"
>>  			"    Remove a MAC address from port_id.\n\n"
>>  
>> +			"mcast_addr flush (port_id)\n"
>> +			"    To flush the set of multicast addresses.\n\n"
>> +
>>  			"mac_addr set (port_id) (XX:XX:XX:XX:XX:XX)\n"
>>  			"    Set the default MAC address for port_id.\n\n"
> 
> Why out this in middle of the mac_addr commands? better to be in logical or alpha order.
Thanks, I will do in v2.

Re: [PATCH] app/testpmd: add flush multicast MAC address command

[huangdengdui]

在 2023/8/1 23:18, Stephen Hemminger 写道:
> On Tue, 1 Aug 2023 10:43:04 +0800
> Dengdui Huang <huangdengdui@huawei.com> wrote:
> 
>> diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
>> index 0d0723f659..2d9d925776 100644
>> --- a/app/test-pmd/cmdline.c
>> +++ b/app/test-pmd/cmdline.c
>> @@ -494,6 +494,9 @@ static void cmd_help_long_parsed(void *parsed_result,
>>  			"mac_addr remove (port_id) (XX:XX:XX:XX:XX:XX)\n"
>>  			"    Remove a MAC address from port_id.\n\n"
>>  
>> +			"mcast_addr flush (port_id)\n"
>> +			"    To flush the set of multicast addresses.\n\n"
>> +
>>  			"mac_addr set (port_id) (XX:XX:XX:XX:XX:XX)\n"
>>  			"    Set the default MAC address for port_id.\n\n"
> 
> Why out this in middle of the mac_addr commands? better to be in logical or alpha order.
Sorry Stephen, I made a mistake in my reply. It's already in logical order(mac_addr/mcast_addr add/remove---->other setting), the same order as in the doc.
The order looks odd because the help command doesn't have a description of "multicast add/remove".Do you agree with this explanation?

Re: [PATCH] app/testpmd: add flush multicast MAC address command

[Stephen Hemminger]

On Wed, 2 Aug 2023 10:41:46 +0800
huangdengdui <huangdengdui@huawei.com> wrote:

> 在 2023/8/1 23:18, Stephen Hemminger 写道:
> > On Tue, 1 Aug 2023 10:43:04 +0800
> > Dengdui Huang <huangdengdui@huawei.com> wrote:
> >   
> >> diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
> >> index 0d0723f659..2d9d925776 100644
> >> --- a/app/test-pmd/cmdline.c
> >> +++ b/app/test-pmd/cmdline.c
> >> @@ -494,6 +494,9 @@ static void cmd_help_long_parsed(void *parsed_result,
> >>  			"mac_addr remove (port_id) (XX:XX:XX:XX:XX:XX)\n"
> >>  			"    Remove a MAC address from port_id.\n\n"
> >>  
> >> +			"mcast_addr flush (port_id)\n"
> >> +			"    To flush the set of multicast addresses.\n\n"
> >> +
> >>  			"mac_addr set (port_id) (XX:XX:XX:XX:XX:XX)\n"
> >>  			"    Set the default MAC address for port_id.\n\n"  
> > 
> > Why out this in middle of the mac_addr commands? better to be in logical or alpha order.  
> Sorry Stephen, I made a mistake in my reply. It's already in logical order(mac_addr/mcast_addr add/remove---->other setting), the same order as in the doc.
> The order looks odd because the help command doesn't have a description of "multicast add/remove".Do you agree with this explanation?

The help is already a bit of a mess. It really needs to be split up more.

Lets add the new line after "set allmulti"?

Re: [PATCH] app/testpmd: add flush multicast MAC address command

[huangdengdui]

在 2023/8/2 12:16, Stephen Hemminger 写道:
> On Wed, 2 Aug 2023 10:41:46 +0800
> huangdengdui <huangdengdui@huawei.com> wrote:
> 
>> 在 2023/8/1 23:18, Stephen Hemminger 写道:
>>> On Tue, 1 Aug 2023 10:43:04 +0800
>>> Dengdui Huang <huangdengdui@huawei.com> wrote:
>>>   
>>>> diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
>>>> index 0d0723f659..2d9d925776 100644
>>>> --- a/app/test-pmd/cmdline.c
>>>> +++ b/app/test-pmd/cmdline.c
>>>> @@ -494,6 +494,9 @@ static void cmd_help_long_parsed(void *parsed_result,
>>>>  			"mac_addr remove (port_id) (XX:XX:XX:XX:XX:XX)\n"
>>>>  			"    Remove a MAC address from port_id.\n\n"
>>>>  
>>>> +			"mcast_addr flush (port_id)\n"
>>>> +			"    To flush the set of multicast addresses.\n\n"
>>>> +
>>>>  			"mac_addr set (port_id) (XX:XX:XX:XX:XX:XX)\n"
>>>>  			"    Set the default MAC address for port_id.\n\n"  
>>>
>>> Why out this in middle of the mac_addr commands? better to be in logical or alpha order.  
>> Sorry Stephen, I made a mistake in my reply. It's already in logical order(mac_addr/mcast_addr add/remove---->other setting), the same order as in the doc.
>> The order looks odd because the help command doesn't have a description of "multicast add/remove".Do you agree with this explanation?
> 
> The help is already a bit of a mess. It really needs to be split up more.
> 
> Lets add the new line after "set allmulti"?
> 
OK, I will do in v2.

[PATCH v2] app/testpmd: add flush multicast MAC address command

[Dengdui Huang]

Add command to flush multicast MAC address
Usage:
    mcast_addr flush <port_id> :
    flush multicast MAC address on port_id

Signed-off-by: Dengdui Huang <huangdengdui@huawei.com>
---
 app/test-pmd/cmdline.c                      | 43 +++++++++++++++++++++
 app/test-pmd/config.c                       | 18 +++++++++
 app/test-pmd/testpmd.h                      |  1 +
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |  8 ++++
 4 files changed, 70 insertions(+)

diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index 0d0723f659..d5a3bd2287 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -516,6 +516,9 @@ static void cmd_help_long_parsed(void *parsed_result,
 			"set allmulti (port_id|all) (on|off)\n"
 			"    Set the allmulti mode on port_id, or all.\n\n"
 
+			"mcast_addr flush (port_id)\n"
+			"    To flush the set of multicast addresses.\n\n"
+
 			"set flow_ctrl rx (on|off) tx (on|off) (high_water)"
 			" (low_water) (pause_time) (send_xon) mac_ctrl_frame_fwd"
 			" (on|off) autoneg (on|off) (port_id)\n"
@@ -8561,6 +8564,45 @@ static cmdline_parse_inst_t cmd_mcast_addr = {
 	},
 };
 
+/* *** FLUSH MULTICAST MAC ADDRESS ON PORT *** */
+struct cmd_mcast_addr_flush_result {
+	cmdline_fixed_string_t mcast_addr_cmd;
+	cmdline_fixed_string_t what;
+	uint16_t port_num;
+};
+
+static void cmd_mcast_addr_flush_parsed(void *parsed_result,
+		__rte_unused struct cmdline *cl,
+		__rte_unused void *data)
+{
+	struct cmd_mcast_addr_flush_result *res = parsed_result;
+
+	mcast_addr_flush(res->port_num);
+}
+
+static cmdline_parse_token_string_t cmd_mcast_addr_flush_cmd =
+	TOKEN_STRING_INITIALIZER(struct cmd_mcast_addr_result,
+				 mcast_addr_cmd, "mcast_addr");
+static cmdline_parse_token_string_t cmd_mcast_addr_flush_what =
+	TOKEN_STRING_INITIALIZER(struct cmd_mcast_addr_result, what,
+				 "flush");
+static cmdline_parse_token_num_t cmd_mcast_addr_flush_portnum =
+	TOKEN_NUM_INITIALIZER(struct cmd_mcast_addr_result, port_num,
+				 RTE_UINT16);
+
+static cmdline_parse_inst_t cmd_mcast_addr_flush = {
+	.f = cmd_mcast_addr_flush_parsed,
+	.data = (void *)0,
+	.help_str = "mcast_addr flush <port_id> : "
+		"flush multicast MAC address on port_id",
+	.tokens = {
+		(void *)&cmd_mcast_addr_flush_cmd,
+		(void *)&cmd_mcast_addr_flush_what,
+		(void *)&cmd_mcast_addr_flush_portnum,
+		NULL,
+	},
+};
+
 /* vf vlan anti spoof configuration */
 
 /* Common result structure for vf vlan anti spoof */
@@ -12929,6 +12971,7 @@ static cmdline_parse_ctx_t builtin_ctx[] = {
 	(cmdline_parse_inst_t *)&cmd_set_port_meter_stats_mask,
 	(cmdline_parse_inst_t *)&cmd_show_port_meter_stats,
 	(cmdline_parse_inst_t *)&cmd_mcast_addr,
+	(cmdline_parse_inst_t *)&cmd_mcast_addr_flush,
 	(cmdline_parse_inst_t *)&cmd_set_vf_vlan_anti_spoof,
 	(cmdline_parse_inst_t *)&cmd_set_vf_mac_anti_spoof,
 	(cmdline_parse_inst_t *)&cmd_set_vf_vlan_stripq,
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 11f3a22048..d66d1db37c 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -6802,6 +6802,24 @@ mcast_addr_remove(portid_t port_id, struct rte_ether_addr *mc_addr)
 		mcast_addr_pool_append(port, mc_addr);
 }
 
+void
+mcast_addr_flush(portid_t port_id)
+{
+	int ret;
+
+	if (port_id_is_invalid(port_id, ENABLED_WARN))
+		return;
+
+	ret = rte_eth_dev_set_mc_addr_list(port_id, NULL, 0);
+	if (ret != 0) {
+		fprintf(stderr,
+			"Failed to flush the set of filtered addresses on port %u\n",
+			port_id);
+		return;
+	}
+	mcast_addr_pool_destroy(port_id);
+}
+
 void
 port_dcb_info_display(portid_t port_id)
 {
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index f1df6a8faf..65d3634f6a 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -1176,6 +1176,7 @@ void show_mcast_macs(portid_t port_id);
 /* Functions to manage the set of filtered Multicast MAC addresses */
 void mcast_addr_add(portid_t port_id, struct rte_ether_addr *mc_addr);
 void mcast_addr_remove(portid_t port_id, struct rte_ether_addr *mc_addr);
+void mcast_addr_flush(portid_t port_id);
 void port_dcb_info_display(portid_t port_id);
 
 uint8_t *open_file(const char *file_path, uint32_t *size);
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index a182479ab2..c3ab1507c4 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -1320,6 +1320,14 @@ filtered by port::
 
    testpmd> mcast_addr remove (port_id) (mcast_addr)
 
+mcast_addr flush
+~~~~~~~~~~~~~~~~
+
+To flush the set of multicast addresses
+filtered by port::
+
+   testpmd> mcast_addr flush (port_id)
+
 mac_addr add (for VF)
 ~~~~~~~~~~~~~~~~~~~~~
 
-- 
2.33.0

Re: [PATCH v2] app/testpmd: add flush multicast MAC address command

[Ferruh Yigit]

On 8/2/2023 7:23 AM, Dengdui Huang wrote:
> Add command to flush multicast MAC address
> Usage:
>     mcast_addr flush <port_id> :
>     flush multicast MAC address on port_id
> 
> Signed-off-by: Dengdui Huang <huangdengdui@huawei.com>
> ---
>  app/test-pmd/cmdline.c                      | 43 +++++++++++++++++++++
>  app/test-pmd/config.c                       | 18 +++++++++
>  app/test-pmd/testpmd.h                      |  1 +
>  doc/guides/testpmd_app_ug/testpmd_funcs.rst |  8 ++++
>  4 files changed, 70 insertions(+)
> 
> diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
> index 0d0723f659..d5a3bd2287 100644
> --- a/app/test-pmd/cmdline.c
> +++ b/app/test-pmd/cmdline.c
> @@ -516,6 +516,9 @@ static void cmd_help_long_parsed(void *parsed_result,
>  			"set allmulti (port_id|all) (on|off)\n"
>  			"    Set the allmulti mode on port_id, or all.\n\n"
>  
> +			"mcast_addr flush (port_id)\n"
> +			"    To flush the set of multicast addresses.\n\n"
> +>

I assume 'set of multicast address' comes from the API getting
'mc_addr_set' as parameter, but using 'set' is not useful in the command
description, what about:
"Flush all multicast MAC addresses on port_id."

Similarly there are logs/documents below refers as "set of multicast
addresses", does it make sense to replace all as "all multicast MAC
addresses"?


And relating to the ordering, as you said "mcast_addr add|remove ..." is
missing, which is contributing to the confusion.
Can you please add this first (in a separate patch) to just below
"mac_addr .*" group, later put "mcast_addr flush .*' below it in this patch?


>  			"set flow_ctrl rx (on|off) tx (on|off) (high_water)"
>  			" (low_water) (pause_time) (send_xon) mac_ctrl_frame_fwd"
>  			" (on|off) autoneg (on|off) (port_id)\n"
> @@ -8561,6 +8564,45 @@ static cmdline_parse_inst_t cmd_mcast_addr = {
>  	},
>  };
>  
> +/* *** FLUSH MULTICAST MAC ADDRESS ON PORT *** */
> +struct cmd_mcast_addr_flush_result {
> +	cmdline_fixed_string_t mcast_addr_cmd;
> +	cmdline_fixed_string_t what;
> +	uint16_t port_num;
> +};
> +
> +static void cmd_mcast_addr_flush_parsed(void *parsed_result,
> +		__rte_unused struct cmdline *cl,
> +		__rte_unused void *data)
> +{
> +	struct cmd_mcast_addr_flush_result *res = parsed_result;
> +
> +	mcast_addr_flush(res->port_num);
> +}
> +
> +static cmdline_parse_token_string_t cmd_mcast_addr_flush_cmd =
> +	TOKEN_STRING_INITIALIZER(struct cmd_mcast_addr_result,
> +				 mcast_addr_cmd, "mcast_addr");
> +static cmdline_parse_token_string_t cmd_mcast_addr_flush_what =
> +	TOKEN_STRING_INITIALIZER(struct cmd_mcast_addr_result, what,
> +				 "flush");
> +static cmdline_parse_token_num_t cmd_mcast_addr_flush_portnum =
> +	TOKEN_NUM_INITIALIZER(struct cmd_mcast_addr_result, port_num,
> +				 RTE_UINT16);
> +
> +static cmdline_parse_inst_t cmd_mcast_addr_flush = {
> +	.f = cmd_mcast_addr_flush_parsed,
> +	.data = (void *)0,
> +	.help_str = "mcast_addr flush <port_id> : "
> +		"flush multicast MAC address on port_id",>

What about:
"Flush all multicast MAC addresses on port_id."


> +	.tokens = {
> +		(void *)&cmd_mcast_addr_flush_cmd,
> +		(void *)&cmd_mcast_addr_flush_what,
> +		(void *)&cmd_mcast_addr_flush_portnum,
> +		NULL,
> +	},
> +};
> +
>  /* vf vlan anti spoof configuration */
>  
>  /* Common result structure for vf vlan anti spoof */
> @@ -12929,6 +12971,7 @@ static cmdline_parse_ctx_t builtin_ctx[] = {
>  	(cmdline_parse_inst_t *)&cmd_set_port_meter_stats_mask,
>  	(cmdline_parse_inst_t *)&cmd_show_port_meter_stats,
>  	(cmdline_parse_inst_t *)&cmd_mcast_addr,
> +	(cmdline_parse_inst_t *)&cmd_mcast_addr_flush,
>  	(cmdline_parse_inst_t *)&cmd_set_vf_vlan_anti_spoof,
>  	(cmdline_parse_inst_t *)&cmd_set_vf_mac_anti_spoof,
>  	(cmdline_parse_inst_t *)&cmd_set_vf_vlan_stripq,
> diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
> index 11f3a22048..d66d1db37c 100644
> --- a/app/test-pmd/config.c
> +++ b/app/test-pmd/config.c
> @@ -6802,6 +6802,24 @@ mcast_addr_remove(portid_t port_id, struct rte_ether_addr *mc_addr)
>  		mcast_addr_pool_append(port, mc_addr);
>  }
>  
> +void
> +mcast_addr_flush(portid_t port_id)
> +{
> +	int ret;
> +
> +	if (port_id_is_invalid(port_id, ENABLED_WARN))
> +		return;
> +
> +	ret = rte_eth_dev_set_mc_addr_list(port_id, NULL, 0);
> +	if (ret != 0) {
> +		fprintf(stderr,
> +			"Failed to flush the set of filtered addresses on port %u\n",
> +			port_id);
> +		return;
> +	}
> +	mcast_addr_pool_destroy(port_id);
> +}
> +
>  void
>  port_dcb_info_display(portid_t port_id)
>  {
> diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
> index f1df6a8faf..65d3634f6a 100644
> --- a/app/test-pmd/testpmd.h
> +++ b/app/test-pmd/testpmd.h
> @@ -1176,6 +1176,7 @@ void show_mcast_macs(portid_t port_id);
>  /* Functions to manage the set of filtered Multicast MAC addresses */
>  void mcast_addr_add(portid_t port_id, struct rte_ether_addr *mc_addr);
>  void mcast_addr_remove(portid_t port_id, struct rte_ether_addr *mc_addr);
> +void mcast_addr_flush(portid_t port_id);
>  void port_dcb_info_display(portid_t port_id);
>  
>  uint8_t *open_file(const char *file_path, uint32_t *size);
> diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> index a182479ab2..c3ab1507c4 100644
> --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
> @@ -1320,6 +1320,14 @@ filtered by port::
>  
>     testpmd> mcast_addr remove (port_id) (mcast_addr)
>  
> +mcast_addr flush
> +~~~~~~~~~~~~~~~~
> +
> +To flush the set of multicast addresses
> +filtered by port::
>

Can join the lines into single line

> +
> +   testpmd> mcast_addr flush (port_id)
> +
>  mac_addr add (for VF)
>  ~~~~~~~~~~~~~~~~~~~~~
>  

Re: [PATCH v2] app/testpmd: add flush multicast MAC address command

[huangdengdui]

On 2023/9/29 1:23, Ferruh Yigit wrote:
> On 8/2/2023 7:23 AM, Dengdui Huang wrote:
>> Add command to flush multicast MAC address
>> Usage:
>>     mcast_addr flush <port_id> :
>>     flush multicast MAC address on port_id
>>
>> Signed-off-by: Dengdui Huang <huangdengdui@huawei.com>
>> ---
>>  app/test-pmd/cmdline.c                      | 43 +++++++++++++++++++++
>>  app/test-pmd/config.c                       | 18 +++++++++
>>  app/test-pmd/testpmd.h                      |  1 +
>>  doc/guides/testpmd_app_ug/testpmd_funcs.rst |  8 ++++
>>  4 files changed, 70 insertions(+)
>>
>> diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
>> index 0d0723f659..d5a3bd2287 100644
>> --- a/app/test-pmd/cmdline.c
>> +++ b/app/test-pmd/cmdline.c
>> @@ -516,6 +516,9 @@ static void cmd_help_long_parsed(void *parsed_result,
>>  			"set allmulti (port_id|all) (on|off)\n"
>>  			"    Set the allmulti mode on port_id, or all.\n\n"
>>  
>> +			"mcast_addr flush (port_id)\n"
>> +			"    To flush the set of multicast addresses.\n\n"
>> +>
> 
> I assume 'set of multicast address' comes from the API getting
> 'mc_addr_set' as parameter, but using 'set' is not useful in the command
> description, what about:
> "Flush all multicast MAC addresses on port_id."
> 
> Similarly there are logs/documents below refers as "set of multicast
> addresses", does it make sense to replace all as "all multicast MAC
> addresses"?
> 
> 
> And relating to the ordering, as you said "mcast_addr add|remove ..." is
> missing, which is contributing to the confusion.
> Can you please add this first (in a separate patch) to just below
> "mac_addr .*" group, later put "mcast_addr flush .*' below it in this patch?
> 
> 
>>  			"set flow_ctrl rx (on|off) tx (on|off) (high_water)"
>>  			" (low_water) (pause_time) (send_xon) mac_ctrl_frame_fwd"
>>  			" (on|off) autoneg (on|off) (port_id)\n"
>> @@ -8561,6 +8564,45 @@ static cmdline_parse_inst_t cmd_mcast_addr = {
>>  	},
>>  };
>>  
>> +/* *** FLUSH MULTICAST MAC ADDRESS ON PORT *** */
>> +struct cmd_mcast_addr_flush_result {
>> +	cmdline_fixed_string_t mcast_addr_cmd;
>> +	cmdline_fixed_string_t what;
>> +	uint16_t port_num;
>> +};
>> +
>> +static void cmd_mcast_addr_flush_parsed(void *parsed_result,
>> +		__rte_unused struct cmdline *cl,
>> +		__rte_unused void *data)
>> +{
>> +	struct cmd_mcast_addr_flush_result *res = parsed_result;
>> +
>> +	mcast_addr_flush(res->port_num);
>> +}
>> +
>> +static cmdline_parse_token_string_t cmd_mcast_addr_flush_cmd =
>> +	TOKEN_STRING_INITIALIZER(struct cmd_mcast_addr_result,
>> +				 mcast_addr_cmd, "mcast_addr");
>> +static cmdline_parse_token_string_t cmd_mcast_addr_flush_what =
>> +	TOKEN_STRING_INITIALIZER(struct cmd_mcast_addr_result, what,
>> +				 "flush");
>> +static cmdline_parse_token_num_t cmd_mcast_addr_flush_portnum =
>> +	TOKEN_NUM_INITIALIZER(struct cmd_mcast_addr_result, port_num,
>> +				 RTE_UINT16);
>> +
>> +static cmdline_parse_inst_t cmd_mcast_addr_flush = {
>> +	.f = cmd_mcast_addr_flush_parsed,
>> +	.data = (void *)0,
>> +	.help_str = "mcast_addr flush <port_id> : "
>> +		"flush multicast MAC address on port_id",>
> 
> What about:
> "Flush all multicast MAC addresses on port_id."
> 
> 
>> +	.tokens = {
>> +		(void *)&cmd_mcast_addr_flush_cmd,
>> +		(void *)&cmd_mcast_addr_flush_what,
>> +		(void *)&cmd_mcast_addr_flush_portnum,
>> +		NULL,
>> +	},
>> +};
>> +
>>  /* vf vlan anti spoof configuration */
>>  
>>  /* Common result structure for vf vlan anti spoof */
>> @@ -12929,6 +12971,7 @@ static cmdline_parse_ctx_t builtin_ctx[] = {
>>  	(cmdline_parse_inst_t *)&cmd_set_port_meter_stats_mask,
>>  	(cmdline_parse_inst_t *)&cmd_show_port_meter_stats,
>>  	(cmdline_parse_inst_t *)&cmd_mcast_addr,
>> +	(cmdline_parse_inst_t *)&cmd_mcast_addr_flush,
>>  	(cmdline_parse_inst_t *)&cmd_set_vf_vlan_anti_spoof,
>>  	(cmdline_parse_inst_t *)&cmd_set_vf_mac_anti_spoof,
>>  	(cmdline_parse_inst_t *)&cmd_set_vf_vlan_stripq,
>> diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
>> index 11f3a22048..d66d1db37c 100644
>> --- a/app/test-pmd/config.c
>> +++ b/app/test-pmd/config.c
>> @@ -6802,6 +6802,24 @@ mcast_addr_remove(portid_t port_id, struct rte_ether_addr *mc_addr)
>>  		mcast_addr_pool_append(port, mc_addr);
>>  }
>>  
>> +void
>> +mcast_addr_flush(portid_t port_id)
>> +{
>> +	int ret;
>> +
>> +	if (port_id_is_invalid(port_id, ENABLED_WARN))
>> +		return;
>> +
>> +	ret = rte_eth_dev_set_mc_addr_list(port_id, NULL, 0);
>> +	if (ret != 0) {
>> +		fprintf(stderr,
>> +			"Failed to flush the set of filtered addresses on port %u\n",
>> +			port_id);
>> +		return;
>> +	}
>> +	mcast_addr_pool_destroy(port_id);
>> +}
>> +
>>  void
>>  port_dcb_info_display(portid_t port_id)
>>  {
>> diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
>> index f1df6a8faf..65d3634f6a 100644
>> --- a/app/test-pmd/testpmd.h
>> +++ b/app/test-pmd/testpmd.h
>> @@ -1176,6 +1176,7 @@ void show_mcast_macs(portid_t port_id);
>>  /* Functions to manage the set of filtered Multicast MAC addresses */
>>  void mcast_addr_add(portid_t port_id, struct rte_ether_addr *mc_addr);
>>  void mcast_addr_remove(portid_t port_id, struct rte_ether_addr *mc_addr);
>> +void mcast_addr_flush(portid_t port_id);
>>  void port_dcb_info_display(portid_t port_id);
>>  
>>  uint8_t *open_file(const char *file_path, uint32_t *size);
>> diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
>> index a182479ab2..c3ab1507c4 100644
>> --- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
>> +++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
>> @@ -1320,6 +1320,14 @@ filtered by port::
>>  
>>     testpmd> mcast_addr remove (port_id) (mcast_addr)
>>  
>> +mcast_addr flush
>> +~~~~~~~~~~~~~~~~
>> +
>> +To flush the set of multicast addresses
>> +filtered by port::
>>
> 
> Can join the lines into single line
> 
>> +
>> +   testpmd> mcast_addr flush (port_id)
>> +
>>  mac_addr add (for VF)
>>  ~~~~~~~~~~~~~~~~~~~~~
>>  
> 
Thanks for your review, I will do in v3.

[PATCH v3 0/2] fix help string and add a new command

[Dengdui Huang]

This series fix help string and add a new command.

v2->v3
add 'mcast_addr add|remove' to help string and
update the new command description.

v1->v2
update order on help string

Dengdui Huang (2):
  app/testpmd: fix help string
  app/testpmd: add flush all multicast MAC address command

 app/test-pmd/cmdline.c                      | 49 +++++++++++++++++++++
 app/test-pmd/config.c                       | 18 ++++++++
 app/test-pmd/testpmd.h                      |  1 +
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |  7 +++
 4 files changed, 75 insertions(+)

-- 
2.33.0

[PATCH v3 1/2] app/testpmd: fix help string

[Dengdui Huang]

Command help string is missing 'mcast_addr add|remove'.
This patch add it.

Fixes: 8fff667578a7 ("app/testpmd: new command to add/remove multicast MAC addresses")
Cc: stable@dpdk.org

Signed-off-by: Dengdui Huang <huangdengdui@huawei.com>
---
 app/test-pmd/cmdline.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index a0e97719b3..3165347a05 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -516,6 +516,12 @@ static void cmd_help_long_parsed(void *parsed_result,
 			"set allmulti (port_id|all) (on|off)\n"
 			"    Set the allmulti mode on port_id, or all.\n\n"
 
+			"mcast_addr add (port_id) (mcast_addr)\n"
+			"    Add a multicast MAC addresses on port_id.\n\n"
+
+			"mcast_addr remove (port_id) (mcast_addr)"
+			"    Remove a multicast MAC address from port_id.\n\n"
+
 			"set flow_ctrl rx (on|off) tx (on|off) (high_water)"
 			" (low_water) (pause_time) (send_xon) mac_ctrl_frame_fwd"
 			" (on|off) autoneg (on|off) (port_id)\n"
-- 
2.33.0

Re: [PATCH v3 1/2] app/testpmd: fix help string

[fengchengwen]

Hi Dengdui,

On 2023/10/8 9:56, Dengdui Huang wrote:
> Command help string is missing 'mcast_addr add|remove'.
> This patch add it.
> 
> Fixes: 8fff667578a7 ("app/testpmd: new command to add/remove multicast MAC addresses")
> Cc: stable@dpdk.org
> 
> Signed-off-by: Dengdui Huang <huangdengdui@huawei.com>
> ---
>  app/test-pmd/cmdline.c | 6 ++++++
>  1 file changed, 6 insertions(+)
> 
> diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
> index a0e97719b3..3165347a05 100644
> --- a/app/test-pmd/cmdline.c
> +++ b/app/test-pmd/cmdline.c
> @@ -516,6 +516,12 @@ static void cmd_help_long_parsed(void *parsed_result,
>  			"set allmulti (port_id|all) (on|off)\n"
>  			"    Set the allmulti mode on port_id, or all.\n\n"
>  
> +			"mcast_addr add (port_id) (mcast_addr)\n"
> +			"    Add a multicast MAC addresses on port_id.\n\n"
> +
> +			"mcast_addr remove (port_id) (mcast_addr)"

Please add '\n' at last.

with above fixed,
Acked-by: Chengwen Feng <fengchengwen@huawei.com>

> +			"    Remove a multicast MAC address from port_id.\n\n"
> +
>  			"set flow_ctrl rx (on|off) tx (on|off) (high_water)"
>  			" (low_water) (pause_time) (send_xon) mac_ctrl_frame_fwd"
>  			" (on|off) autoneg (on|off) (port_id)\n"
> 

Re: [PATCH v3 1/2] app/testpmd: fix help string

[huangdengdui]

On 2023/10/8 10:47, fengchengwen wrote:
> Hi Dengdui,
> 
> On 2023/10/8 9:56, Dengdui Huang wrote:
>> Command help string is missing 'mcast_addr add|remove'.
>> This patch add it.
>>
>> Fixes: 8fff667578a7 ("app/testpmd: new command to add/remove multicast MAC addresses")
>> Cc: stable@dpdk.org
>>
>> Signed-off-by: Dengdui Huang <huangdengdui@huawei.com>
>> ---
>>  app/test-pmd/cmdline.c | 6 ++++++
>>  1 file changed, 6 insertions(+)
>>
>> diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
>> index a0e97719b3..3165347a05 100644
>> --- a/app/test-pmd/cmdline.c
>> +++ b/app/test-pmd/cmdline.c
>> @@ -516,6 +516,12 @@ static void cmd_help_long_parsed(void *parsed_result,
>>  			"set allmulti (port_id|all) (on|off)\n"
>>  			"    Set the allmulti mode on port_id, or all.\n\n"
>>  
>> +			"mcast_addr add (port_id) (mcast_addr)\n"
>> +			"    Add a multicast MAC addresses on port_id.\n\n"
>> +
>> +			"mcast_addr remove (port_id) (mcast_addr)"
> 
> Please add '\n' at last.
> 
> with above fixed,
> Acked-by: Chengwen Feng <fengchengwen@huawei.com>
> 
OK, thanks
>> +			"    Remove a multicast MAC address from port_id.\n\n"
>> +
>>  			"set flow_ctrl rx (on|off) tx (on|off) (high_water)"
>>  			" (low_water) (pause_time) (send_xon) mac_ctrl_frame_fwd"
>>  			" (on|off) autoneg (on|off) (port_id)\n"
>>

[PATCH v3 2/2] app/testpmd: add flush all multicast MAC address command

[Dengdui Huang]

Add command to flush all multicast MAC address
Usage:
    mcast_addr flush <port_id> :
    flush all multicast MAC address on port_id

Signed-off-by: Dengdui Huang <huangdengdui@huawei.com>
---
 app/test-pmd/cmdline.c                      | 43 +++++++++++++++++++++
 app/test-pmd/config.c                       | 18 +++++++++
 app/test-pmd/testpmd.h                      |  1 +
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |  7 ++++
 4 files changed, 69 insertions(+)

diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index 3165347a05..6404d06e8f 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -522,6 +522,9 @@ static void cmd_help_long_parsed(void *parsed_result,
 			"mcast_addr remove (port_id) (mcast_addr)"
 			"    Remove a multicast MAC address from port_id.\n\n"
 
+			"mcast_addr flush (port_id)\n"
+			"    Flush all multicast MAC addresses on port_id.\n\n"
+
 			"set flow_ctrl rx (on|off) tx (on|off) (high_water)"
 			" (low_water) (pause_time) (send_xon) mac_ctrl_frame_fwd"
 			" (on|off) autoneg (on|off) (port_id)\n"
@@ -8567,6 +8570,45 @@ static cmdline_parse_inst_t cmd_mcast_addr = {
 	},
 };
 
+/* *** FLUSH MULTICAST MAC ADDRESS ON PORT *** */
+struct cmd_mcast_addr_flush_result {
+	cmdline_fixed_string_t mcast_addr_cmd;
+	cmdline_fixed_string_t what;
+	uint16_t port_num;
+};
+
+static void cmd_mcast_addr_flush_parsed(void *parsed_result,
+		__rte_unused struct cmdline *cl,
+		__rte_unused void *data)
+{
+	struct cmd_mcast_addr_flush_result *res = parsed_result;
+
+	mcast_addr_flush(res->port_num);
+}
+
+static cmdline_parse_token_string_t cmd_mcast_addr_flush_cmd =
+	TOKEN_STRING_INITIALIZER(struct cmd_mcast_addr_result,
+				 mcast_addr_cmd, "mcast_addr");
+static cmdline_parse_token_string_t cmd_mcast_addr_flush_what =
+	TOKEN_STRING_INITIALIZER(struct cmd_mcast_addr_result, what,
+				 "flush");
+static cmdline_parse_token_num_t cmd_mcast_addr_flush_portnum =
+	TOKEN_NUM_INITIALIZER(struct cmd_mcast_addr_result, port_num,
+				 RTE_UINT16);
+
+static cmdline_parse_inst_t cmd_mcast_addr_flush = {
+	.f = cmd_mcast_addr_flush_parsed,
+	.data = (void *)0,
+	.help_str = "mcast_addr flush <port_id> : "
+		"flush all multicast MAC addresses on port_id",
+	.tokens = {
+		(void *)&cmd_mcast_addr_flush_cmd,
+		(void *)&cmd_mcast_addr_flush_what,
+		(void *)&cmd_mcast_addr_flush_portnum,
+		NULL,
+	},
+};
+
 /* vf vlan anti spoof configuration */
 
 /* Common result structure for vf vlan anti spoof */
@@ -12935,6 +12977,7 @@ static cmdline_parse_ctx_t builtin_ctx[] = {
 	(cmdline_parse_inst_t *)&cmd_set_port_meter_stats_mask,
 	(cmdline_parse_inst_t *)&cmd_show_port_meter_stats,
 	(cmdline_parse_inst_t *)&cmd_mcast_addr,
+	(cmdline_parse_inst_t *)&cmd_mcast_addr_flush,
 	(cmdline_parse_inst_t *)&cmd_set_vf_vlan_anti_spoof,
 	(cmdline_parse_inst_t *)&cmd_set_vf_mac_anti_spoof,
 	(cmdline_parse_inst_t *)&cmd_set_vf_vlan_stripq,
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 709864bb44..7034fa125b 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -6829,6 +6829,24 @@ mcast_addr_remove(portid_t port_id, struct rte_ether_addr *mc_addr)
 		mcast_addr_pool_append(port, mc_addr);
 }
 
+void
+mcast_addr_flush(portid_t port_id)
+{
+	int ret;
+
+	if (port_id_is_invalid(port_id, ENABLED_WARN))
+		return;
+
+	ret = rte_eth_dev_set_mc_addr_list(port_id, NULL, 0);
+	if (ret != 0) {
+		fprintf(stderr,
+			"Failed to flush all multicast MAC addresses on port_id %u\n",
+			port_id);
+		return;
+	}
+	mcast_addr_pool_destroy(port_id);
+}
+
 void
 port_dcb_info_display(portid_t port_id)
 {
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index e236845a81..6457ac4c0a 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -1181,6 +1181,7 @@ void show_mcast_macs(portid_t port_id);
 /* Functions to manage the set of filtered Multicast MAC addresses */
 void mcast_addr_add(portid_t port_id, struct rte_ether_addr *mc_addr);
 void mcast_addr_remove(portid_t port_id, struct rte_ether_addr *mc_addr);
+void mcast_addr_flush(portid_t port_id);
 void port_dcb_info_display(portid_t port_id);
 
 uint8_t *open_file(const char *file_path, uint32_t *size);
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index e6d218caaa..7a40980d6c 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -1323,6 +1323,13 @@ filtered by port::
 
    testpmd> mcast_addr remove (port_id) (mcast_addr)
 
+mcast_addr flush
+~~~~~~~~~~~~~~~~
+
+Flush all multicast MAC addresses on port_id::
+
+   testpmd> mcast_addr flush (port_id)
+
 mac_addr add (for VF)
 ~~~~~~~~~~~~~~~~~~~~~
 
-- 
2.33.0

Re: [PATCH v3 2/2] app/testpmd: add flush all multicast MAC address command

[fengchengwen]

Hi Dengdui,

On 2023/10/8 9:56, Dengdui Huang wrote:
> Add command to flush all multicast MAC address
> Usage:
>     mcast_addr flush <port_id> :
>     flush all multicast MAC address on port_id
> 
> Signed-off-by: Dengdui Huang <huangdengdui@huawei.com>

Acked-by: Chengwen Feng <fengchengwen@huawei.com>

[PATCH v3 0/2] fix help string and add a new command

[Dengdui Huang]

This series fix help string and add a new command.

v3->v4
help string add '\n' at last.

v2->v3
add 'mcast_addr add|remove' to help string and
update the new command description.

v1->v2
update order on help string.

Dengdui Huang (2):
  app/testpmd: fix help string
  app/testpmd: add flush all multicast MAC address command

 app/test-pmd/cmdline.c                      | 49 +++++++++++++++++++++
 app/test-pmd/config.c                       | 18 ++++++++
 app/test-pmd/testpmd.h                      |  1 +
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |  7 +++
 4 files changed, 75 insertions(+)

-- 
2.33.0

[PATCH v4 1/2] app/testpmd: fix help string

[Dengdui Huang]

Command help string is missing 'mcast_addr add|remove'.
This patch add it.

Fixes: 8fff667578a7 ("app/testpmd: new command to add/remove multicast MAC addresses")
Cc: stable@dpdk.org

Signed-off-by: Dengdui Huang <huangdengdui@huawei.com>
Acked-by: Chengwen Feng <fengchengwen@huawei.com>
---
 app/test-pmd/cmdline.c | 6 ++++++
 1 file changed, 6 insertions(+)

diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index a0e97719b3..b934f61be7 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -516,6 +516,12 @@ static void cmd_help_long_parsed(void *parsed_result,
 			"set allmulti (port_id|all) (on|off)\n"
 			"    Set the allmulti mode on port_id, or all.\n\n"
 
+			"mcast_addr add (port_id) (mcast_addr)\n"
+			"    Add a multicast MAC addresses on port_id.\n\n"
+
+			"mcast_addr remove (port_id) (mcast_addr)\n"
+			"    Remove a multicast MAC address from port_id.\n\n"
+
 			"set flow_ctrl rx (on|off) tx (on|off) (high_water)"
 			" (low_water) (pause_time) (send_xon) mac_ctrl_frame_fwd"
 			" (on|off) autoneg (on|off) (port_id)\n"
-- 
2.33.0

[PATCH v4 2/2] app/testpmd: add flush all multicast MAC address command

[Dengdui Huang]

Add command to flush all multicast MAC address
Usage:
    mcast_addr flush <port_id> :
    flush all multicast MAC address on port_id

Signed-off-by: Dengdui Huang <huangdengdui@huawei.com>
Acked-by: Chengwen Feng <fengchengwen@huawei.com>
---
 app/test-pmd/cmdline.c                      | 43 +++++++++++++++++++++
 app/test-pmd/config.c                       | 18 +++++++++
 app/test-pmd/testpmd.h                      |  1 +
 doc/guides/testpmd_app_ug/testpmd_funcs.rst |  7 ++++
 4 files changed, 69 insertions(+)

diff --git a/app/test-pmd/cmdline.c b/app/test-pmd/cmdline.c
index b934f61be7..45bfedd394 100644
--- a/app/test-pmd/cmdline.c
+++ b/app/test-pmd/cmdline.c
@@ -522,6 +522,9 @@ static void cmd_help_long_parsed(void *parsed_result,
 			"mcast_addr remove (port_id) (mcast_addr)\n"
 			"    Remove a multicast MAC address from port_id.\n\n"
 
+			"mcast_addr flush (port_id)\n"
+			"    Flush all multicast MAC addresses on port_id.\n\n"
+
 			"set flow_ctrl rx (on|off) tx (on|off) (high_water)"
 			" (low_water) (pause_time) (send_xon) mac_ctrl_frame_fwd"
 			" (on|off) autoneg (on|off) (port_id)\n"
@@ -8567,6 +8570,45 @@ static cmdline_parse_inst_t cmd_mcast_addr = {
 	},
 };
 
+/* *** FLUSH MULTICAST MAC ADDRESS ON PORT *** */
+struct cmd_mcast_addr_flush_result {
+	cmdline_fixed_string_t mcast_addr_cmd;
+	cmdline_fixed_string_t what;
+	uint16_t port_num;
+};
+
+static void cmd_mcast_addr_flush_parsed(void *parsed_result,
+		__rte_unused struct cmdline *cl,
+		__rte_unused void *data)
+{
+	struct cmd_mcast_addr_flush_result *res = parsed_result;
+
+	mcast_addr_flush(res->port_num);
+}
+
+static cmdline_parse_token_string_t cmd_mcast_addr_flush_cmd =
+	TOKEN_STRING_INITIALIZER(struct cmd_mcast_addr_result,
+				 mcast_addr_cmd, "mcast_addr");
+static cmdline_parse_token_string_t cmd_mcast_addr_flush_what =
+	TOKEN_STRING_INITIALIZER(struct cmd_mcast_addr_result, what,
+				 "flush");
+static cmdline_parse_token_num_t cmd_mcast_addr_flush_portnum =
+	TOKEN_NUM_INITIALIZER(struct cmd_mcast_addr_result, port_num,
+				 RTE_UINT16);
+
+static cmdline_parse_inst_t cmd_mcast_addr_flush = {
+	.f = cmd_mcast_addr_flush_parsed,
+	.data = (void *)0,
+	.help_str = "mcast_addr flush <port_id> : "
+		"flush all multicast MAC addresses on port_id",
+	.tokens = {
+		(void *)&cmd_mcast_addr_flush_cmd,
+		(void *)&cmd_mcast_addr_flush_what,
+		(void *)&cmd_mcast_addr_flush_portnum,
+		NULL,
+	},
+};
+
 /* vf vlan anti spoof configuration */
 
 /* Common result structure for vf vlan anti spoof */
@@ -12935,6 +12977,7 @@ static cmdline_parse_ctx_t builtin_ctx[] = {
 	(cmdline_parse_inst_t *)&cmd_set_port_meter_stats_mask,
 	(cmdline_parse_inst_t *)&cmd_show_port_meter_stats,
 	(cmdline_parse_inst_t *)&cmd_mcast_addr,
+	(cmdline_parse_inst_t *)&cmd_mcast_addr_flush,
 	(cmdline_parse_inst_t *)&cmd_set_vf_vlan_anti_spoof,
 	(cmdline_parse_inst_t *)&cmd_set_vf_mac_anti_spoof,
 	(cmdline_parse_inst_t *)&cmd_set_vf_vlan_stripq,
diff --git a/app/test-pmd/config.c b/app/test-pmd/config.c
index 709864bb44..7034fa125b 100644
--- a/app/test-pmd/config.c
+++ b/app/test-pmd/config.c
@@ -6829,6 +6829,24 @@ mcast_addr_remove(portid_t port_id, struct rte_ether_addr *mc_addr)
 		mcast_addr_pool_append(port, mc_addr);
 }
 
+void
+mcast_addr_flush(portid_t port_id)
+{
+	int ret;
+
+	if (port_id_is_invalid(port_id, ENABLED_WARN))
+		return;
+
+	ret = rte_eth_dev_set_mc_addr_list(port_id, NULL, 0);
+	if (ret != 0) {
+		fprintf(stderr,
+			"Failed to flush all multicast MAC addresses on port_id %u\n",
+			port_id);
+		return;
+	}
+	mcast_addr_pool_destroy(port_id);
+}
+
 void
 port_dcb_info_display(portid_t port_id)
 {
diff --git a/app/test-pmd/testpmd.h b/app/test-pmd/testpmd.h
index e236845a81..6457ac4c0a 100644
--- a/app/test-pmd/testpmd.h
+++ b/app/test-pmd/testpmd.h
@@ -1181,6 +1181,7 @@ void show_mcast_macs(portid_t port_id);
 /* Functions to manage the set of filtered Multicast MAC addresses */
 void mcast_addr_add(portid_t port_id, struct rte_ether_addr *mc_addr);
 void mcast_addr_remove(portid_t port_id, struct rte_ether_addr *mc_addr);
+void mcast_addr_flush(portid_t port_id);
 void port_dcb_info_display(portid_t port_id);
 
 uint8_t *open_file(const char *file_path, uint32_t *size);
diff --git a/doc/guides/testpmd_app_ug/testpmd_funcs.rst b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
index e6d218caaa..7a40980d6c 100644
--- a/doc/guides/testpmd_app_ug/testpmd_funcs.rst
+++ b/doc/guides/testpmd_app_ug/testpmd_funcs.rst
@@ -1323,6 +1323,13 @@ filtered by port::
 
    testpmd> mcast_addr remove (port_id) (mcast_addr)
 
+mcast_addr flush
+~~~~~~~~~~~~~~~~
+
+Flush all multicast MAC addresses on port_id::
+
+   testpmd> mcast_addr flush (port_id)
+
 mac_addr add (for VF)
 ~~~~~~~~~~~~~~~~~~~~~
 
-- 
2.33.0

Re: [PATCH v3 0/2] fix help string and add a new command

[Ferruh Yigit]

On 10/8/2023 7:46 AM, Dengdui Huang wrote:
> This series fix help string and add a new command.
> 
> v3->v4
> help string add '\n' at last.
> 
> v2->v3
> add 'mcast_addr add|remove' to help string and
> update the new command description.
> 
> v1->v2
> update order on help string.
> 
> Dengdui Huang (2):
>   app/testpmd: fix help string
>   app/testpmd: add flush all multicast MAC address command
> 
>  

For series,
Acked-by: Ferruh Yigit <ferruh.yigit@amd.com>


Series applied to dpdk-next-net/main, thanks.