[PATCH v5 0/4] PCI: layerscape: Add suspend/resume support for ls1043 and ls1021

[PATCH v5 0/4] PCI: layerscape: Add suspend/resume support for ls1043 and ls1021

[Frank Li]

Add suspend/resume support for ls1043 and ls1021.

Change log see each patch

Frank Li (4):
  PCI: layerscape: Add function pointer for exit_from_l2()
  PCI: layerscape: Add suspend/resume for ls1021a
  PCI: layerscape(ep): Rename pf_* as pf_lut_*
  PCI: layerscape: Add suspend/resume for ls1043a

 .../pci/controller/dwc/pci-layerscape-ep.c    |  16 +-
 drivers/pci/controller/dwc/pci-layerscape.c   | 189 ++++++++++++++++--
 2 files changed, 176 insertions(+), 29 deletions(-)

-- 
2.34.1

[PATCH v5 0/4] PCI: layerscape: Add suspend/resume support for ls1043 and ls1021

[Frank Li]

Add suspend/resume support for ls1043 and ls1021.

Change log see each patch

Frank Li (4):
  PCI: layerscape: Add function pointer for exit_from_l2()
  PCI: layerscape: Add suspend/resume for ls1021a
  PCI: layerscape(ep): Rename pf_* as pf_lut_*
  PCI: layerscape: Add suspend/resume for ls1043a

 .../pci/controller/dwc/pci-layerscape-ep.c    |  16 +-
 drivers/pci/controller/dwc/pci-layerscape.c   | 189 ++++++++++++++++--
 2 files changed, 176 insertions(+), 29 deletions(-)

-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 0/4] PCI: layerscape: Add suspend/resume support for ls1043 and ls1021

[Frank Li]

Add suspend/resume support for ls1043 and ls1021.

Change log see each patch

Frank Li (4):
  PCI: layerscape: Add function pointer for exit_from_l2()
  PCI: layerscape: Add suspend/resume for ls1021a
  PCI: layerscape(ep): Rename pf_* as pf_lut_*
  PCI: layerscape: Add suspend/resume for ls1043a

 .../pci/controller/dwc/pci-layerscape-ep.c    |  16 +-
 drivers/pci/controller/dwc/pci-layerscape.c   | 189 ++++++++++++++++--
 2 files changed, 176 insertions(+), 29 deletions(-)

-- 
2.34.1

[PATCH v5 1/4] PCI: layerscape: Add function pointer for exit_from_l2()

[Frank Li]

Since difference SoCs require different sequence for exiting L2, let's add
a separate "exit_from_l2()" callback. This callback can be used to execute
SoC specific sequence.

Change ls_pcie_exit_from_l2() return value from void to int. Return error
if exit_from_l2() failure at exit resume flow.

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---

Notes:
    Change from v4 to v5
    - none
    Change from v3 to v4
    - update commit message
      Add mani's review by tag
    Change from v2 to v3
    - fixed according to mani's feedback
      1. update commit message
      2. move dw_pcie_host_ops to next patch
      3. check return value from exit_from_l2()
    Change from v1 to v2
    - change subject 'a' to 'A'
    
    Change from v1 to v2
    - change subject 'a' to 'A'

 drivers/pci/controller/dwc/pci-layerscape.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
index 37956e09c65bd..aea89926bcc4f 100644
--- a/drivers/pci/controller/dwc/pci-layerscape.c
+++ b/drivers/pci/controller/dwc/pci-layerscape.c
@@ -39,6 +39,7 @@
 
 struct ls_pcie_drvdata {
 	const u32 pf_off;
+	int (*exit_from_l2)(struct dw_pcie_rp *pp);
 	bool pm_support;
 };
 
@@ -125,7 +126,7 @@ static void ls_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
 		dev_err(pcie->pci->dev, "PME_Turn_off timeout\n");
 }
 
-static void ls_pcie_exit_from_l2(struct dw_pcie_rp *pp)
+static int ls_pcie_exit_from_l2(struct dw_pcie_rp *pp)
 {
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
 	struct ls_pcie *pcie = to_ls_pcie(pci);
@@ -150,6 +151,8 @@ static void ls_pcie_exit_from_l2(struct dw_pcie_rp *pp)
 				 10000);
 	if (ret)
 		dev_err(pcie->pci->dev, "L2 exit timeout\n");
+
+	return ret;
 }
 
 static int ls_pcie_host_init(struct dw_pcie_rp *pp)
@@ -180,6 +183,7 @@ static const struct ls_pcie_drvdata ls1021a_drvdata = {
 static const struct ls_pcie_drvdata layerscape_drvdata = {
 	.pf_off = 0xc0000,
 	.pm_support = true,
+	.exit_from_l2 = ls_pcie_exit_from_l2,
 };
 
 static const struct of_device_id ls_pcie_of_match[] = {
@@ -247,11 +251,14 @@ static int ls_pcie_suspend_noirq(struct device *dev)
 static int ls_pcie_resume_noirq(struct device *dev)
 {
 	struct ls_pcie *pcie = dev_get_drvdata(dev);
+	int ret;
 
 	if (!pcie->drvdata->pm_support)
 		return 0;
 
-	ls_pcie_exit_from_l2(&pcie->pci->pp);
+	ret = pcie->drvdata->exit_from_l2(&pcie->pci->pp);
+	if (ret)
+		return ret;
 
 	return dw_pcie_resume_noirq(pcie->pci);
 }
-- 
2.34.1

[PATCH v5 1/4] PCI: layerscape: Add function pointer for exit_from_l2()

[Frank Li]

Since difference SoCs require different sequence for exiting L2, let's add
a separate "exit_from_l2()" callback. This callback can be used to execute
SoC specific sequence.

Change ls_pcie_exit_from_l2() return value from void to int. Return error
if exit_from_l2() failure at exit resume flow.

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---

Notes:
    Change from v4 to v5
    - none
    Change from v3 to v4
    - update commit message
      Add mani's review by tag
    Change from v2 to v3
    - fixed according to mani's feedback
      1. update commit message
      2. move dw_pcie_host_ops to next patch
      3. check return value from exit_from_l2()
    Change from v1 to v2
    - change subject 'a' to 'A'
    
    Change from v1 to v2
    - change subject 'a' to 'A'

 drivers/pci/controller/dwc/pci-layerscape.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
index 37956e09c65bd..aea89926bcc4f 100644
--- a/drivers/pci/controller/dwc/pci-layerscape.c
+++ b/drivers/pci/controller/dwc/pci-layerscape.c
@@ -39,6 +39,7 @@
 
 struct ls_pcie_drvdata {
 	const u32 pf_off;
+	int (*exit_from_l2)(struct dw_pcie_rp *pp);
 	bool pm_support;
 };
 
@@ -125,7 +126,7 @@ static void ls_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
 		dev_err(pcie->pci->dev, "PME_Turn_off timeout\n");
 }
 
-static void ls_pcie_exit_from_l2(struct dw_pcie_rp *pp)
+static int ls_pcie_exit_from_l2(struct dw_pcie_rp *pp)
 {
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
 	struct ls_pcie *pcie = to_ls_pcie(pci);
@@ -150,6 +151,8 @@ static void ls_pcie_exit_from_l2(struct dw_pcie_rp *pp)
 				 10000);
 	if (ret)
 		dev_err(pcie->pci->dev, "L2 exit timeout\n");
+
+	return ret;
 }
 
 static int ls_pcie_host_init(struct dw_pcie_rp *pp)
@@ -180,6 +183,7 @@ static const struct ls_pcie_drvdata ls1021a_drvdata = {
 static const struct ls_pcie_drvdata layerscape_drvdata = {
 	.pf_off = 0xc0000,
 	.pm_support = true,
+	.exit_from_l2 = ls_pcie_exit_from_l2,
 };
 
 static const struct of_device_id ls_pcie_of_match[] = {
@@ -247,11 +251,14 @@ static int ls_pcie_suspend_noirq(struct device *dev)
 static int ls_pcie_resume_noirq(struct device *dev)
 {
 	struct ls_pcie *pcie = dev_get_drvdata(dev);
+	int ret;
 
 	if (!pcie->drvdata->pm_support)
 		return 0;
 
-	ls_pcie_exit_from_l2(&pcie->pci->pp);
+	ret = pcie->drvdata->exit_from_l2(&pcie->pci->pp);
+	if (ret)
+		return ret;
 
 	return dw_pcie_resume_noirq(pcie->pci);
 }
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 1/4] PCI: layerscape: Add function pointer for exit_from_l2()

[Frank Li]

Since difference SoCs require different sequence for exiting L2, let's add
a separate "exit_from_l2()" callback. This callback can be used to execute
SoC specific sequence.

Change ls_pcie_exit_from_l2() return value from void to int. Return error
if exit_from_l2() failure at exit resume flow.

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---

Notes:
    Change from v4 to v5
    - none
    Change from v3 to v4
    - update commit message
      Add mani's review by tag
    Change from v2 to v3
    - fixed according to mani's feedback
      1. update commit message
      2. move dw_pcie_host_ops to next patch
      3. check return value from exit_from_l2()
    Change from v1 to v2
    - change subject 'a' to 'A'
    
    Change from v1 to v2
    - change subject 'a' to 'A'

 drivers/pci/controller/dwc/pci-layerscape.c | 11 +++++++++--
 1 file changed, 9 insertions(+), 2 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
index 37956e09c65bd..aea89926bcc4f 100644
--- a/drivers/pci/controller/dwc/pci-layerscape.c
+++ b/drivers/pci/controller/dwc/pci-layerscape.c
@@ -39,6 +39,7 @@
 
 struct ls_pcie_drvdata {
 	const u32 pf_off;
+	int (*exit_from_l2)(struct dw_pcie_rp *pp);
 	bool pm_support;
 };
 
@@ -125,7 +126,7 @@ static void ls_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
 		dev_err(pcie->pci->dev, "PME_Turn_off timeout\n");
 }
 
-static void ls_pcie_exit_from_l2(struct dw_pcie_rp *pp)
+static int ls_pcie_exit_from_l2(struct dw_pcie_rp *pp)
 {
 	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
 	struct ls_pcie *pcie = to_ls_pcie(pci);
@@ -150,6 +151,8 @@ static void ls_pcie_exit_from_l2(struct dw_pcie_rp *pp)
 				 10000);
 	if (ret)
 		dev_err(pcie->pci->dev, "L2 exit timeout\n");
+
+	return ret;
 }
 
 static int ls_pcie_host_init(struct dw_pcie_rp *pp)
@@ -180,6 +183,7 @@ static const struct ls_pcie_drvdata ls1021a_drvdata = {
 static const struct ls_pcie_drvdata layerscape_drvdata = {
 	.pf_off = 0xc0000,
 	.pm_support = true,
+	.exit_from_l2 = ls_pcie_exit_from_l2,
 };
 
 static const struct of_device_id ls_pcie_of_match[] = {
@@ -247,11 +251,14 @@ static int ls_pcie_suspend_noirq(struct device *dev)
 static int ls_pcie_resume_noirq(struct device *dev)
 {
 	struct ls_pcie *pcie = dev_get_drvdata(dev);
+	int ret;
 
 	if (!pcie->drvdata->pm_support)
 		return 0;
 
-	ls_pcie_exit_from_l2(&pcie->pci->pp);
+	ret = pcie->drvdata->exit_from_l2(&pcie->pci->pp);
+	if (ret)
+		return ret;
 
 	return dw_pcie_resume_noirq(pcie->pci);
 }
-- 
2.34.1

RE: [PATCH v5 1/4] PCI: layerscape: Add function pointer for exit_from_l2()

[Roy Zang]

> From: Frank Li <frank.li@nxp.com>
> Subject: [PATCH v5 1/4] PCI: layerscape: Add function pointer for exit_from_l2()
> 
> Since difference SoCs require different sequence for exiting L2, let's add a
> separate "exit_from_l2()" callback. This callback can be used to execute SoC
> specific sequence.
> 
> Change ls_pcie_exit_from_l2() return value from void to int. Return error if
> exit_from_l2() failure at exit resume flow.
> 
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by:  Roy Zang <Roy.Zang@nxp.com>
Roy

RE: [PATCH v5 1/4] PCI: layerscape: Add function pointer for exit_from_l2()

[Roy Zang]

> From: Frank Li <frank.li@nxp.com>
> Subject: [PATCH v5 1/4] PCI: layerscape: Add function pointer for exit_from_l2()
> 
> Since difference SoCs require different sequence for exiting L2, let's add a
> separate "exit_from_l2()" callback. This callback can be used to execute SoC
> specific sequence.
> 
> Change ls_pcie_exit_from_l2() return value from void to int. Return error if
> exit_from_l2() failure at exit resume flow.
> 
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by:  Roy Zang <Roy.Zang@nxp.com>
Roy

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

RE: [PATCH v5 1/4] PCI: layerscape: Add function pointer for exit_from_l2()

[Roy Zang]

> From: Frank Li <frank.li@nxp.com>
> Subject: [PATCH v5 1/4] PCI: layerscape: Add function pointer for exit_from_l2()
> 
> Since difference SoCs require different sequence for exiting L2, let's add a
> separate "exit_from_l2()" callback. This callback can be used to execute SoC
> specific sequence.
> 
> Change ls_pcie_exit_from_l2() return value from void to int. Return error if
> exit_from_l2() failure at exit resume flow.
> 
> Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by:  Roy Zang <Roy.Zang@nxp.com>
Roy

[PATCH v5 2/4] PCI: layerscape: Add suspend/resume for ls1021a

[Frank Li]

Add suspend/resume support for Layerscape LS1021a.

In the suspend path, PME_Turn_Off message is sent to the endpoint to
transition the link to L2/L3_Ready state. In this SoC, there is no way to
check if the controller has received the PME_To_Ack from the endpoint or
not. So to be on the safer side, the driver just waits for
PCIE_PME_TO_L2_TIMEOUT_US before asserting the SoC specific PMXMTTURNOFF
bit to complete the PME_Turn_Off handshake. Then the link would enter L2/L3
state depending on the VAUX supply.

In the resume path, the link is brought back from L2 to L0 by doing a
software reset.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---

Notes:
    Change from v4 to v5
    - update comit message
    - remove a empty line
    - use comments
    /* Reset the PEX wrapper to bring the link out of L2 */
    - pci->pp.ops = pcie->drvdata->ops,
    ls_pcie_host_ops to the "ops" member of layerscape_drvdata.
    - don't set pcie->scfg = NULL at error path
    
    Change from v3 to v4
    - update commit message.
    - it is reset a glue logic part for PCI controller.
    - use regmap_write_bits() to reduce code change.
    
    Change from v2 to v3
    - update according to mani's feedback
    change from v1 to v2
    - change subject 'a' to 'A'

 drivers/pci/controller/dwc/pci-layerscape.c | 81 ++++++++++++++++++++-
 1 file changed, 80 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
index aea89926bcc4f..8bdaae9be7d56 100644
--- a/drivers/pci/controller/dwc/pci-layerscape.c
+++ b/drivers/pci/controller/dwc/pci-layerscape.c
@@ -35,11 +35,19 @@
 #define PF_MCR_PTOMR		BIT(0)
 #define PF_MCR_EXL2S		BIT(1)
 
+/* LS1021A PEXn PM Write Control Register */
+#define SCFG_PEXPMWRCR(idx)	(0x5c + (idx) * 0x64)
+#define PMXMTTURNOFF		BIT(31)
+#define SCFG_PEXSFTRSTCR	0x190
+#define PEXSR(idx)		BIT(idx)
+
 #define PCIE_IATU_NUM		6
 
 struct ls_pcie_drvdata {
 	const u32 pf_off;
+	const struct dw_pcie_host_ops *ops;
 	int (*exit_from_l2)(struct dw_pcie_rp *pp);
+	bool scfg_support;
 	bool pm_support;
 };
 
@@ -47,6 +55,8 @@ struct ls_pcie {
 	struct dw_pcie *pci;
 	const struct ls_pcie_drvdata *drvdata;
 	void __iomem *pf_base;
+	struct regmap *scfg;
+	int index;
 	bool big_endian;
 };
 
@@ -171,18 +181,70 @@ static int ls_pcie_host_init(struct dw_pcie_rp *pp)
 	return 0;
 }
 
+static void scfg_pcie_send_turnoff_msg(struct regmap *scfg, u32 reg, u32 mask)
+{
+	/* Send PME_Turn_Off message */
+	regmap_write_bits(scfg, reg, mask, mask);
+
+	/*
+	 * There is no specific register to check for PME_To_Ack from endpoint.
+	 * So on the safe side, wait for PCIE_PME_TO_L2_TIMEOUT_US.
+	 */
+	mdelay(PCIE_PME_TO_L2_TIMEOUT_US/1000);
+
+	/*
+	 * Layerscape hardware reference manual recommends clearing the PMXMTTURNOFF bit
+	 * to complete the PME_Turn_Off handshake.
+	 */
+	regmap_write_bits(scfg, reg, mask, 0);
+}
+
+static void ls1021a_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct ls_pcie *pcie = to_ls_pcie(pci);
+
+	scfg_pcie_send_turnoff_msg(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), PMXMTTURNOFF);
+}
+
+static int scfg_pcie_exit_from_l2(struct regmap *scfg, u32 reg, u32 mask)
+{
+	/* Reset the PEX wrapper to bring the link out of L2 */
+	regmap_write_bits(scfg, reg, mask, mask);
+	regmap_write_bits(scfg, reg, mask, 0);
+
+	return 0;
+}
+
+static int ls1021a_pcie_exit_from_l2(struct dw_pcie_rp *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct ls_pcie *pcie = to_ls_pcie(pci);
+
+	return scfg_pcie_exit_from_l2(pcie->scfg, SCFG_PEXSFTRSTCR, PEXSR(pcie->index));
+}
+
 static const struct dw_pcie_host_ops ls_pcie_host_ops = {
 	.host_init = ls_pcie_host_init,
 	.pme_turn_off = ls_pcie_send_turnoff_msg,
 };
 
+static const struct dw_pcie_host_ops ls1021a_pcie_host_ops = {
+	.host_init = ls_pcie_host_init,
+	.pme_turn_off = ls1021a_pcie_send_turnoff_msg,
+};
+
 static const struct ls_pcie_drvdata ls1021a_drvdata = {
-	.pm_support = false,
+	.pm_support = true,
+	.scfg_support = true,
+	.ops = &ls1021a_pcie_host_ops,
+	.exit_from_l2 = ls1021a_pcie_exit_from_l2,
 };
 
 static const struct ls_pcie_drvdata layerscape_drvdata = {
 	.pf_off = 0xc0000,
 	.pm_support = true,
+	.ops = &ls_pcie_host_ops;
 	.exit_from_l2 = ls_pcie_exit_from_l2,
 };
 
@@ -205,6 +267,8 @@ static int ls_pcie_probe(struct platform_device *pdev)
 	struct dw_pcie *pci;
 	struct ls_pcie *pcie;
 	struct resource *dbi_base;
+	u32 index[2];
+	int ret;
 
 	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
 	if (!pcie)
@@ -220,6 +284,7 @@ static int ls_pcie_probe(struct platform_device *pdev)
 	pci->pp.ops = &ls_pcie_host_ops;
 
 	pcie->pci = pci;
+	pci->pp.ops = pcie->drvdata->ops;
 
 	dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
 	pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
@@ -230,6 +295,20 @@ static int ls_pcie_probe(struct platform_device *pdev)
 
 	pcie->pf_base = pci->dbi_base + pcie->drvdata->pf_off;
 
+	if (pcie->drvdata->scfg_support) {
+		pcie->scfg = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,pcie-scfg");
+		if (IS_ERR(pcie->scfg)) {
+			dev_err(dev, "No syscfg phandle specified\n");
+			return PTR_ERR(pcie->scfg);
+		}
+
+		ret = of_property_read_u32_array(dev->of_node, "fsl,pcie-scfg", index, 2);
+		if (ret)
+			return ret;
+
+		pcie->index = index[1];
+	}
+
 	if (!ls_pcie_is_bridge(pcie))
 		return -ENODEV;
 
-- 
2.34.1

[PATCH v5 2/4] PCI: layerscape: Add suspend/resume for ls1021a

[Frank Li]

Add suspend/resume support for Layerscape LS1021a.

In the suspend path, PME_Turn_Off message is sent to the endpoint to
transition the link to L2/L3_Ready state. In this SoC, there is no way to
check if the controller has received the PME_To_Ack from the endpoint or
not. So to be on the safer side, the driver just waits for
PCIE_PME_TO_L2_TIMEOUT_US before asserting the SoC specific PMXMTTURNOFF
bit to complete the PME_Turn_Off handshake. Then the link would enter L2/L3
state depending on the VAUX supply.

In the resume path, the link is brought back from L2 to L0 by doing a
software reset.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---

Notes:
    Change from v4 to v5
    - update comit message
    - remove a empty line
    - use comments
    /* Reset the PEX wrapper to bring the link out of L2 */
    - pci->pp.ops = pcie->drvdata->ops,
    ls_pcie_host_ops to the "ops" member of layerscape_drvdata.
    - don't set pcie->scfg = NULL at error path
    
    Change from v3 to v4
    - update commit message.
    - it is reset a glue logic part for PCI controller.
    - use regmap_write_bits() to reduce code change.
    
    Change from v2 to v3
    - update according to mani's feedback
    change from v1 to v2
    - change subject 'a' to 'A'

 drivers/pci/controller/dwc/pci-layerscape.c | 81 ++++++++++++++++++++-
 1 file changed, 80 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
index aea89926bcc4f..8bdaae9be7d56 100644
--- a/drivers/pci/controller/dwc/pci-layerscape.c
+++ b/drivers/pci/controller/dwc/pci-layerscape.c
@@ -35,11 +35,19 @@
 #define PF_MCR_PTOMR		BIT(0)
 #define PF_MCR_EXL2S		BIT(1)
 
+/* LS1021A PEXn PM Write Control Register */
+#define SCFG_PEXPMWRCR(idx)	(0x5c + (idx) * 0x64)
+#define PMXMTTURNOFF		BIT(31)
+#define SCFG_PEXSFTRSTCR	0x190
+#define PEXSR(idx)		BIT(idx)
+
 #define PCIE_IATU_NUM		6
 
 struct ls_pcie_drvdata {
 	const u32 pf_off;
+	const struct dw_pcie_host_ops *ops;
 	int (*exit_from_l2)(struct dw_pcie_rp *pp);
+	bool scfg_support;
 	bool pm_support;
 };
 
@@ -47,6 +55,8 @@ struct ls_pcie {
 	struct dw_pcie *pci;
 	const struct ls_pcie_drvdata *drvdata;
 	void __iomem *pf_base;
+	struct regmap *scfg;
+	int index;
 	bool big_endian;
 };
 
@@ -171,18 +181,70 @@ static int ls_pcie_host_init(struct dw_pcie_rp *pp)
 	return 0;
 }
 
+static void scfg_pcie_send_turnoff_msg(struct regmap *scfg, u32 reg, u32 mask)
+{
+	/* Send PME_Turn_Off message */
+	regmap_write_bits(scfg, reg, mask, mask);
+
+	/*
+	 * There is no specific register to check for PME_To_Ack from endpoint.
+	 * So on the safe side, wait for PCIE_PME_TO_L2_TIMEOUT_US.
+	 */
+	mdelay(PCIE_PME_TO_L2_TIMEOUT_US/1000);
+
+	/*
+	 * Layerscape hardware reference manual recommends clearing the PMXMTTURNOFF bit
+	 * to complete the PME_Turn_Off handshake.
+	 */
+	regmap_write_bits(scfg, reg, mask, 0);
+}
+
+static void ls1021a_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct ls_pcie *pcie = to_ls_pcie(pci);
+
+	scfg_pcie_send_turnoff_msg(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), PMXMTTURNOFF);
+}
+
+static int scfg_pcie_exit_from_l2(struct regmap *scfg, u32 reg, u32 mask)
+{
+	/* Reset the PEX wrapper to bring the link out of L2 */
+	regmap_write_bits(scfg, reg, mask, mask);
+	regmap_write_bits(scfg, reg, mask, 0);
+
+	return 0;
+}
+
+static int ls1021a_pcie_exit_from_l2(struct dw_pcie_rp *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct ls_pcie *pcie = to_ls_pcie(pci);
+
+	return scfg_pcie_exit_from_l2(pcie->scfg, SCFG_PEXSFTRSTCR, PEXSR(pcie->index));
+}
+
 static const struct dw_pcie_host_ops ls_pcie_host_ops = {
 	.host_init = ls_pcie_host_init,
 	.pme_turn_off = ls_pcie_send_turnoff_msg,
 };
 
+static const struct dw_pcie_host_ops ls1021a_pcie_host_ops = {
+	.host_init = ls_pcie_host_init,
+	.pme_turn_off = ls1021a_pcie_send_turnoff_msg,
+};
+
 static const struct ls_pcie_drvdata ls1021a_drvdata = {
-	.pm_support = false,
+	.pm_support = true,
+	.scfg_support = true,
+	.ops = &ls1021a_pcie_host_ops,
+	.exit_from_l2 = ls1021a_pcie_exit_from_l2,
 };
 
 static const struct ls_pcie_drvdata layerscape_drvdata = {
 	.pf_off = 0xc0000,
 	.pm_support = true,
+	.ops = &ls_pcie_host_ops;
 	.exit_from_l2 = ls_pcie_exit_from_l2,
 };
 
@@ -205,6 +267,8 @@ static int ls_pcie_probe(struct platform_device *pdev)
 	struct dw_pcie *pci;
 	struct ls_pcie *pcie;
 	struct resource *dbi_base;
+	u32 index[2];
+	int ret;
 
 	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
 	if (!pcie)
@@ -220,6 +284,7 @@ static int ls_pcie_probe(struct platform_device *pdev)
 	pci->pp.ops = &ls_pcie_host_ops;
 
 	pcie->pci = pci;
+	pci->pp.ops = pcie->drvdata->ops;
 
 	dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
 	pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
@@ -230,6 +295,20 @@ static int ls_pcie_probe(struct platform_device *pdev)
 
 	pcie->pf_base = pci->dbi_base + pcie->drvdata->pf_off;
 
+	if (pcie->drvdata->scfg_support) {
+		pcie->scfg = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,pcie-scfg");
+		if (IS_ERR(pcie->scfg)) {
+			dev_err(dev, "No syscfg phandle specified\n");
+			return PTR_ERR(pcie->scfg);
+		}
+
+		ret = of_property_read_u32_array(dev->of_node, "fsl,pcie-scfg", index, 2);
+		if (ret)
+			return ret;
+
+		pcie->index = index[1];
+	}
+
 	if (!ls_pcie_is_bridge(pcie))
 		return -ENODEV;
 
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 2/4] PCI: layerscape: Add suspend/resume for ls1021a

[Frank Li]

Add suspend/resume support for Layerscape LS1021a.

In the suspend path, PME_Turn_Off message is sent to the endpoint to
transition the link to L2/L3_Ready state. In this SoC, there is no way to
check if the controller has received the PME_To_Ack from the endpoint or
not. So to be on the safer side, the driver just waits for
PCIE_PME_TO_L2_TIMEOUT_US before asserting the SoC specific PMXMTTURNOFF
bit to complete the PME_Turn_Off handshake. Then the link would enter L2/L3
state depending on the VAUX supply.

In the resume path, the link is brought back from L2 to L0 by doing a
software reset.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---

Notes:
    Change from v4 to v5
    - update comit message
    - remove a empty line
    - use comments
    /* Reset the PEX wrapper to bring the link out of L2 */
    - pci->pp.ops = pcie->drvdata->ops,
    ls_pcie_host_ops to the "ops" member of layerscape_drvdata.
    - don't set pcie->scfg = NULL at error path
    
    Change from v3 to v4
    - update commit message.
    - it is reset a glue logic part for PCI controller.
    - use regmap_write_bits() to reduce code change.
    
    Change from v2 to v3
    - update according to mani's feedback
    change from v1 to v2
    - change subject 'a' to 'A'

 drivers/pci/controller/dwc/pci-layerscape.c | 81 ++++++++++++++++++++-
 1 file changed, 80 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
index aea89926bcc4f..8bdaae9be7d56 100644
--- a/drivers/pci/controller/dwc/pci-layerscape.c
+++ b/drivers/pci/controller/dwc/pci-layerscape.c
@@ -35,11 +35,19 @@
 #define PF_MCR_PTOMR		BIT(0)
 #define PF_MCR_EXL2S		BIT(1)
 
+/* LS1021A PEXn PM Write Control Register */
+#define SCFG_PEXPMWRCR(idx)	(0x5c + (idx) * 0x64)
+#define PMXMTTURNOFF		BIT(31)
+#define SCFG_PEXSFTRSTCR	0x190
+#define PEXSR(idx)		BIT(idx)
+
 #define PCIE_IATU_NUM		6
 
 struct ls_pcie_drvdata {
 	const u32 pf_off;
+	const struct dw_pcie_host_ops *ops;
 	int (*exit_from_l2)(struct dw_pcie_rp *pp);
+	bool scfg_support;
 	bool pm_support;
 };
 
@@ -47,6 +55,8 @@ struct ls_pcie {
 	struct dw_pcie *pci;
 	const struct ls_pcie_drvdata *drvdata;
 	void __iomem *pf_base;
+	struct regmap *scfg;
+	int index;
 	bool big_endian;
 };
 
@@ -171,18 +181,70 @@ static int ls_pcie_host_init(struct dw_pcie_rp *pp)
 	return 0;
 }
 
+static void scfg_pcie_send_turnoff_msg(struct regmap *scfg, u32 reg, u32 mask)
+{
+	/* Send PME_Turn_Off message */
+	regmap_write_bits(scfg, reg, mask, mask);
+
+	/*
+	 * There is no specific register to check for PME_To_Ack from endpoint.
+	 * So on the safe side, wait for PCIE_PME_TO_L2_TIMEOUT_US.
+	 */
+	mdelay(PCIE_PME_TO_L2_TIMEOUT_US/1000);
+
+	/*
+	 * Layerscape hardware reference manual recommends clearing the PMXMTTURNOFF bit
+	 * to complete the PME_Turn_Off handshake.
+	 */
+	regmap_write_bits(scfg, reg, mask, 0);
+}
+
+static void ls1021a_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct ls_pcie *pcie = to_ls_pcie(pci);
+
+	scfg_pcie_send_turnoff_msg(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), PMXMTTURNOFF);
+}
+
+static int scfg_pcie_exit_from_l2(struct regmap *scfg, u32 reg, u32 mask)
+{
+	/* Reset the PEX wrapper to bring the link out of L2 */
+	regmap_write_bits(scfg, reg, mask, mask);
+	regmap_write_bits(scfg, reg, mask, 0);
+
+	return 0;
+}
+
+static int ls1021a_pcie_exit_from_l2(struct dw_pcie_rp *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct ls_pcie *pcie = to_ls_pcie(pci);
+
+	return scfg_pcie_exit_from_l2(pcie->scfg, SCFG_PEXSFTRSTCR, PEXSR(pcie->index));
+}
+
 static const struct dw_pcie_host_ops ls_pcie_host_ops = {
 	.host_init = ls_pcie_host_init,
 	.pme_turn_off = ls_pcie_send_turnoff_msg,
 };
 
+static const struct dw_pcie_host_ops ls1021a_pcie_host_ops = {
+	.host_init = ls_pcie_host_init,
+	.pme_turn_off = ls1021a_pcie_send_turnoff_msg,
+};
+
 static const struct ls_pcie_drvdata ls1021a_drvdata = {
-	.pm_support = false,
+	.pm_support = true,
+	.scfg_support = true,
+	.ops = &ls1021a_pcie_host_ops,
+	.exit_from_l2 = ls1021a_pcie_exit_from_l2,
 };
 
 static const struct ls_pcie_drvdata layerscape_drvdata = {
 	.pf_off = 0xc0000,
 	.pm_support = true,
+	.ops = &ls_pcie_host_ops;
 	.exit_from_l2 = ls_pcie_exit_from_l2,
 };
 
@@ -205,6 +267,8 @@ static int ls_pcie_probe(struct platform_device *pdev)
 	struct dw_pcie *pci;
 	struct ls_pcie *pcie;
 	struct resource *dbi_base;
+	u32 index[2];
+	int ret;
 
 	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
 	if (!pcie)
@@ -220,6 +284,7 @@ static int ls_pcie_probe(struct platform_device *pdev)
 	pci->pp.ops = &ls_pcie_host_ops;
 
 	pcie->pci = pci;
+	pci->pp.ops = pcie->drvdata->ops;
 
 	dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
 	pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
@@ -230,6 +295,20 @@ static int ls_pcie_probe(struct platform_device *pdev)
 
 	pcie->pf_base = pci->dbi_base + pcie->drvdata->pf_off;
 
+	if (pcie->drvdata->scfg_support) {
+		pcie->scfg = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,pcie-scfg");
+		if (IS_ERR(pcie->scfg)) {
+			dev_err(dev, "No syscfg phandle specified\n");
+			return PTR_ERR(pcie->scfg);
+		}
+
+		ret = of_property_read_u32_array(dev->of_node, "fsl,pcie-scfg", index, 2);
+		if (ret)
+			return ret;
+
+		pcie->index = index[1];
+	}
+
 	if (!ls_pcie_is_bridge(pcie))
 		return -ENODEV;
 
-- 
2.34.1

RE: [PATCH v5 2/4] PCI: layerscape: Add suspend/resume for ls1021a

[Roy Zang]

> From: Frank Li <frank.li@nxp.com>
> Subject: [PATCH v5 2/4] PCI: layerscape: Add suspend/resume for ls1021a
> 
> Add suspend/resume support for Layerscape LS1021a.
> 
> In the suspend path, PME_Turn_Off message is sent to the endpoint to
> transition the link to L2/L3_Ready state. In this SoC, there is no way to check if
> the controller has received the PME_To_Ack from the endpoint or not. So to be
> on the safer side, the driver just waits for PCIE_PME_TO_L2_TIMEOUT_US
> before asserting the SoC specific PMXMTTURNOFF bit to complete the
> PME_Turn_Off handshake. Then the link would enter L2/L3 state depending on
> the VAUX supply.
> 
> In the resume path, the link is brought back from L2 to L0 by doing a software
> reset.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by:  Roy Zang <Roy.Zang@nxp.com>
Roy

RE: [PATCH v5 2/4] PCI: layerscape: Add suspend/resume for ls1021a

[Roy Zang]

> From: Frank Li <frank.li@nxp.com>
> Subject: [PATCH v5 2/4] PCI: layerscape: Add suspend/resume for ls1021a
> 
> Add suspend/resume support for Layerscape LS1021a.
> 
> In the suspend path, PME_Turn_Off message is sent to the endpoint to
> transition the link to L2/L3_Ready state. In this SoC, there is no way to check if
> the controller has received the PME_To_Ack from the endpoint or not. So to be
> on the safer side, the driver just waits for PCIE_PME_TO_L2_TIMEOUT_US
> before asserting the SoC specific PMXMTTURNOFF bit to complete the
> PME_Turn_Off handshake. Then the link would enter L2/L3 state depending on
> the VAUX supply.
> 
> In the resume path, the link is brought back from L2 to L0 by doing a software
> reset.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by:  Roy Zang <Roy.Zang@nxp.com>
Roy

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

RE: [PATCH v5 2/4] PCI: layerscape: Add suspend/resume for ls1021a

[Roy Zang]

> From: Frank Li <frank.li@nxp.com>
> Subject: [PATCH v5 2/4] PCI: layerscape: Add suspend/resume for ls1021a
> 
> Add suspend/resume support for Layerscape LS1021a.
> 
> In the suspend path, PME_Turn_Off message is sent to the endpoint to
> transition the link to L2/L3_Ready state. In this SoC, there is no way to check if
> the controller has received the PME_To_Ack from the endpoint or not. So to be
> on the safer side, the driver just waits for PCIE_PME_TO_L2_TIMEOUT_US
> before asserting the SoC specific PMXMTTURNOFF bit to complete the
> PME_Turn_Off handshake. Then the link would enter L2/L3 state depending on
> the VAUX supply.
> 
> In the resume path, the link is brought back from L2 to L0 by doing a software
> reset.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by:  Roy Zang <Roy.Zang@nxp.com>
Roy

Re: [PATCH v5 2/4] PCI: layerscape: Add suspend/resume for ls1021a

[Manivannan Sadhasivam]

On Fri, Dec 01, 2023 at 11:17:10AM -0500, Frank Li wrote:
> Add suspend/resume support for Layerscape LS1021a.
> 
> In the suspend path, PME_Turn_Off message is sent to the endpoint to
> transition the link to L2/L3_Ready state. In this SoC, there is no way to
> check if the controller has received the PME_To_Ack from the endpoint or
> not. So to be on the safer side, the driver just waits for
> PCIE_PME_TO_L2_TIMEOUT_US before asserting the SoC specific PMXMTTURNOFF
> bit to complete the PME_Turn_Off handshake. Then the link would enter L2/L3
> state depending on the VAUX supply.
> 
> In the resume path, the link is brought back from L2 to L0 by doing a
> software reset.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>

One comment below. With that addressed,

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

> ---
> 
> Notes:
>     Change from v4 to v5
>     - update comit message
>     - remove a empty line
>     - use comments
>     /* Reset the PEX wrapper to bring the link out of L2 */
>     - pci->pp.ops = pcie->drvdata->ops,
>     ls_pcie_host_ops to the "ops" member of layerscape_drvdata.
>     - don't set pcie->scfg = NULL at error path
>     
>     Change from v3 to v4
>     - update commit message.
>     - it is reset a glue logic part for PCI controller.
>     - use regmap_write_bits() to reduce code change.
>     
>     Change from v2 to v3
>     - update according to mani's feedback
>     change from v1 to v2
>     - change subject 'a' to 'A'
> 
>  drivers/pci/controller/dwc/pci-layerscape.c | 81 ++++++++++++++++++++-
>  1 file changed, 80 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
> index aea89926bcc4f..8bdaae9be7d56 100644
> --- a/drivers/pci/controller/dwc/pci-layerscape.c
> +++ b/drivers/pci/controller/dwc/pci-layerscape.c
> @@ -35,11 +35,19 @@
>  #define PF_MCR_PTOMR		BIT(0)
>  #define PF_MCR_EXL2S		BIT(1)
>  
> +/* LS1021A PEXn PM Write Control Register */
> +#define SCFG_PEXPMWRCR(idx)	(0x5c + (idx) * 0x64)
> +#define PMXMTTURNOFF		BIT(31)
> +#define SCFG_PEXSFTRSTCR	0x190
> +#define PEXSR(idx)		BIT(idx)
> +
>  #define PCIE_IATU_NUM		6
>  
>  struct ls_pcie_drvdata {
>  	const u32 pf_off;
> +	const struct dw_pcie_host_ops *ops;
>  	int (*exit_from_l2)(struct dw_pcie_rp *pp);
> +	bool scfg_support;
>  	bool pm_support;
>  };
>  
> @@ -47,6 +55,8 @@ struct ls_pcie {
>  	struct dw_pcie *pci;
>  	const struct ls_pcie_drvdata *drvdata;
>  	void __iomem *pf_base;
> +	struct regmap *scfg;
> +	int index;
>  	bool big_endian;
>  };
>  
> @@ -171,18 +181,70 @@ static int ls_pcie_host_init(struct dw_pcie_rp *pp)
>  	return 0;
>  }
>  
> +static void scfg_pcie_send_turnoff_msg(struct regmap *scfg, u32 reg, u32 mask)
> +{
> +	/* Send PME_Turn_Off message */
> +	regmap_write_bits(scfg, reg, mask, mask);
> +
> +	/*
> +	 * There is no specific register to check for PME_To_Ack from endpoint.
> +	 * So on the safe side, wait for PCIE_PME_TO_L2_TIMEOUT_US.
> +	 */
> +	mdelay(PCIE_PME_TO_L2_TIMEOUT_US/1000);
> +
> +	/*
> +	 * Layerscape hardware reference manual recommends clearing the PMXMTTURNOFF bit
> +	 * to complete the PME_Turn_Off handshake.
> +	 */
> +	regmap_write_bits(scfg, reg, mask, 0);
> +}
> +
> +static void ls1021a_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
> +{
> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +	struct ls_pcie *pcie = to_ls_pcie(pci);
> +
> +	scfg_pcie_send_turnoff_msg(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), PMXMTTURNOFF);
> +}
> +
> +static int scfg_pcie_exit_from_l2(struct regmap *scfg, u32 reg, u32 mask)
> +{
> +	/* Reset the PEX wrapper to bring the link out of L2 */
> +	regmap_write_bits(scfg, reg, mask, mask);
> +	regmap_write_bits(scfg, reg, mask, 0);
> +
> +	return 0;
> +}
> +
> +static int ls1021a_pcie_exit_from_l2(struct dw_pcie_rp *pp)
> +{
> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +	struct ls_pcie *pcie = to_ls_pcie(pci);
> +
> +	return scfg_pcie_exit_from_l2(pcie->scfg, SCFG_PEXSFTRSTCR, PEXSR(pcie->index));
> +}
> +
>  static const struct dw_pcie_host_ops ls_pcie_host_ops = {
>  	.host_init = ls_pcie_host_init,
>  	.pme_turn_off = ls_pcie_send_turnoff_msg,
>  };
>  
> +static const struct dw_pcie_host_ops ls1021a_pcie_host_ops = {
> +	.host_init = ls_pcie_host_init,
> +	.pme_turn_off = ls1021a_pcie_send_turnoff_msg,
> +};
> +
>  static const struct ls_pcie_drvdata ls1021a_drvdata = {
> -	.pm_support = false,
> +	.pm_support = true,
> +	.scfg_support = true,
> +	.ops = &ls1021a_pcie_host_ops,
> +	.exit_from_l2 = ls1021a_pcie_exit_from_l2,
>  };
>  
>  static const struct ls_pcie_drvdata layerscape_drvdata = {
>  	.pf_off = 0xc0000,
>  	.pm_support = true,
> +	.ops = &ls_pcie_host_ops;
>  	.exit_from_l2 = ls_pcie_exit_from_l2,
>  };
>  
> @@ -205,6 +267,8 @@ static int ls_pcie_probe(struct platform_device *pdev)
>  	struct dw_pcie *pci;
>  	struct ls_pcie *pcie;
>  	struct resource *dbi_base;
> +	u32 index[2];
> +	int ret;
>  
>  	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
>  	if (!pcie)
> @@ -220,6 +284,7 @@ static int ls_pcie_probe(struct platform_device *pdev)
>  	pci->pp.ops = &ls_pcie_host_ops;

This should be removed now.

- Mani

>  
>  	pcie->pci = pci;
> +	pci->pp.ops = pcie->drvdata->ops;
>  
>  	dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
>  	pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
> @@ -230,6 +295,20 @@ static int ls_pcie_probe(struct platform_device *pdev)
>  
>  	pcie->pf_base = pci->dbi_base + pcie->drvdata->pf_off;
>  
> +	if (pcie->drvdata->scfg_support) {
> +		pcie->scfg = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,pcie-scfg");
> +		if (IS_ERR(pcie->scfg)) {
> +			dev_err(dev, "No syscfg phandle specified\n");
> +			return PTR_ERR(pcie->scfg);
> +		}
> +
> +		ret = of_property_read_u32_array(dev->of_node, "fsl,pcie-scfg", index, 2);
> +		if (ret)
> +			return ret;
> +
> +		pcie->index = index[1];
> +	}
> +
>  	if (!ls_pcie_is_bridge(pcie))
>  		return -ENODEV;
>  
> -- 
> 2.34.1
> 

-- 
மணிவண்ணன் சதாசிவம்

Re: [PATCH v5 2/4] PCI: layerscape: Add suspend/resume for ls1021a

[Manivannan Sadhasivam]

On Fri, Dec 01, 2023 at 11:17:10AM -0500, Frank Li wrote:
> Add suspend/resume support for Layerscape LS1021a.
> 
> In the suspend path, PME_Turn_Off message is sent to the endpoint to
> transition the link to L2/L3_Ready state. In this SoC, there is no way to
> check if the controller has received the PME_To_Ack from the endpoint or
> not. So to be on the safer side, the driver just waits for
> PCIE_PME_TO_L2_TIMEOUT_US before asserting the SoC specific PMXMTTURNOFF
> bit to complete the PME_Turn_Off handshake. Then the link would enter L2/L3
> state depending on the VAUX supply.
> 
> In the resume path, the link is brought back from L2 to L0 by doing a
> software reset.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>

One comment below. With that addressed,

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

> ---
> 
> Notes:
>     Change from v4 to v5
>     - update comit message
>     - remove a empty line
>     - use comments
>     /* Reset the PEX wrapper to bring the link out of L2 */
>     - pci->pp.ops = pcie->drvdata->ops,
>     ls_pcie_host_ops to the "ops" member of layerscape_drvdata.
>     - don't set pcie->scfg = NULL at error path
>     
>     Change from v3 to v4
>     - update commit message.
>     - it is reset a glue logic part for PCI controller.
>     - use regmap_write_bits() to reduce code change.
>     
>     Change from v2 to v3
>     - update according to mani's feedback
>     change from v1 to v2
>     - change subject 'a' to 'A'
> 
>  drivers/pci/controller/dwc/pci-layerscape.c | 81 ++++++++++++++++++++-
>  1 file changed, 80 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
> index aea89926bcc4f..8bdaae9be7d56 100644
> --- a/drivers/pci/controller/dwc/pci-layerscape.c
> +++ b/drivers/pci/controller/dwc/pci-layerscape.c
> @@ -35,11 +35,19 @@
>  #define PF_MCR_PTOMR		BIT(0)
>  #define PF_MCR_EXL2S		BIT(1)
>  
> +/* LS1021A PEXn PM Write Control Register */
> +#define SCFG_PEXPMWRCR(idx)	(0x5c + (idx) * 0x64)
> +#define PMXMTTURNOFF		BIT(31)
> +#define SCFG_PEXSFTRSTCR	0x190
> +#define PEXSR(idx)		BIT(idx)
> +
>  #define PCIE_IATU_NUM		6
>  
>  struct ls_pcie_drvdata {
>  	const u32 pf_off;
> +	const struct dw_pcie_host_ops *ops;
>  	int (*exit_from_l2)(struct dw_pcie_rp *pp);
> +	bool scfg_support;
>  	bool pm_support;
>  };
>  
> @@ -47,6 +55,8 @@ struct ls_pcie {
>  	struct dw_pcie *pci;
>  	const struct ls_pcie_drvdata *drvdata;
>  	void __iomem *pf_base;
> +	struct regmap *scfg;
> +	int index;
>  	bool big_endian;
>  };
>  
> @@ -171,18 +181,70 @@ static int ls_pcie_host_init(struct dw_pcie_rp *pp)
>  	return 0;
>  }
>  
> +static void scfg_pcie_send_turnoff_msg(struct regmap *scfg, u32 reg, u32 mask)
> +{
> +	/* Send PME_Turn_Off message */
> +	regmap_write_bits(scfg, reg, mask, mask);
> +
> +	/*
> +	 * There is no specific register to check for PME_To_Ack from endpoint.
> +	 * So on the safe side, wait for PCIE_PME_TO_L2_TIMEOUT_US.
> +	 */
> +	mdelay(PCIE_PME_TO_L2_TIMEOUT_US/1000);
> +
> +	/*
> +	 * Layerscape hardware reference manual recommends clearing the PMXMTTURNOFF bit
> +	 * to complete the PME_Turn_Off handshake.
> +	 */
> +	regmap_write_bits(scfg, reg, mask, 0);
> +}
> +
> +static void ls1021a_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
> +{
> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +	struct ls_pcie *pcie = to_ls_pcie(pci);
> +
> +	scfg_pcie_send_turnoff_msg(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), PMXMTTURNOFF);
> +}
> +
> +static int scfg_pcie_exit_from_l2(struct regmap *scfg, u32 reg, u32 mask)
> +{
> +	/* Reset the PEX wrapper to bring the link out of L2 */
> +	regmap_write_bits(scfg, reg, mask, mask);
> +	regmap_write_bits(scfg, reg, mask, 0);
> +
> +	return 0;
> +}
> +
> +static int ls1021a_pcie_exit_from_l2(struct dw_pcie_rp *pp)
> +{
> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +	struct ls_pcie *pcie = to_ls_pcie(pci);
> +
> +	return scfg_pcie_exit_from_l2(pcie->scfg, SCFG_PEXSFTRSTCR, PEXSR(pcie->index));
> +}
> +
>  static const struct dw_pcie_host_ops ls_pcie_host_ops = {
>  	.host_init = ls_pcie_host_init,
>  	.pme_turn_off = ls_pcie_send_turnoff_msg,
>  };
>  
> +static const struct dw_pcie_host_ops ls1021a_pcie_host_ops = {
> +	.host_init = ls_pcie_host_init,
> +	.pme_turn_off = ls1021a_pcie_send_turnoff_msg,
> +};
> +
>  static const struct ls_pcie_drvdata ls1021a_drvdata = {
> -	.pm_support = false,
> +	.pm_support = true,
> +	.scfg_support = true,
> +	.ops = &ls1021a_pcie_host_ops,
> +	.exit_from_l2 = ls1021a_pcie_exit_from_l2,
>  };
>  
>  static const struct ls_pcie_drvdata layerscape_drvdata = {
>  	.pf_off = 0xc0000,
>  	.pm_support = true,
> +	.ops = &ls_pcie_host_ops;
>  	.exit_from_l2 = ls_pcie_exit_from_l2,
>  };
>  
> @@ -205,6 +267,8 @@ static int ls_pcie_probe(struct platform_device *pdev)
>  	struct dw_pcie *pci;
>  	struct ls_pcie *pcie;
>  	struct resource *dbi_base;
> +	u32 index[2];
> +	int ret;
>  
>  	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
>  	if (!pcie)
> @@ -220,6 +284,7 @@ static int ls_pcie_probe(struct platform_device *pdev)
>  	pci->pp.ops = &ls_pcie_host_ops;

This should be removed now.

- Mani

>  
>  	pcie->pci = pci;
> +	pci->pp.ops = pcie->drvdata->ops;
>  
>  	dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
>  	pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
> @@ -230,6 +295,20 @@ static int ls_pcie_probe(struct platform_device *pdev)
>  
>  	pcie->pf_base = pci->dbi_base + pcie->drvdata->pf_off;
>  
> +	if (pcie->drvdata->scfg_support) {
> +		pcie->scfg = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,pcie-scfg");
> +		if (IS_ERR(pcie->scfg)) {
> +			dev_err(dev, "No syscfg phandle specified\n");
> +			return PTR_ERR(pcie->scfg);
> +		}
> +
> +		ret = of_property_read_u32_array(dev->of_node, "fsl,pcie-scfg", index, 2);
> +		if (ret)
> +			return ret;
> +
> +		pcie->index = index[1];
> +	}
> +
>  	if (!ls_pcie_is_bridge(pcie))
>  		return -ENODEV;
>  
> -- 
> 2.34.1
> 

-- 
மணிவண்ணன் சதாசிவம்

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 2/4] PCI: layerscape: Add suspend/resume for ls1021a

[Manivannan Sadhasivam]

On Fri, Dec 01, 2023 at 11:17:10AM -0500, Frank Li wrote:
> Add suspend/resume support for Layerscape LS1021a.
> 
> In the suspend path, PME_Turn_Off message is sent to the endpoint to
> transition the link to L2/L3_Ready state. In this SoC, there is no way to
> check if the controller has received the PME_To_Ack from the endpoint or
> not. So to be on the safer side, the driver just waits for
> PCIE_PME_TO_L2_TIMEOUT_US before asserting the SoC specific PMXMTTURNOFF
> bit to complete the PME_Turn_Off handshake. Then the link would enter L2/L3
> state depending on the VAUX supply.
> 
> In the resume path, the link is brought back from L2 to L0 by doing a
> software reset.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>

One comment below. With that addressed,

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

> ---
> 
> Notes:
>     Change from v4 to v5
>     - update comit message
>     - remove a empty line
>     - use comments
>     /* Reset the PEX wrapper to bring the link out of L2 */
>     - pci->pp.ops = pcie->drvdata->ops,
>     ls_pcie_host_ops to the "ops" member of layerscape_drvdata.
>     - don't set pcie->scfg = NULL at error path
>     
>     Change from v3 to v4
>     - update commit message.
>     - it is reset a glue logic part for PCI controller.
>     - use regmap_write_bits() to reduce code change.
>     
>     Change from v2 to v3
>     - update according to mani's feedback
>     change from v1 to v2
>     - change subject 'a' to 'A'
> 
>  drivers/pci/controller/dwc/pci-layerscape.c | 81 ++++++++++++++++++++-
>  1 file changed, 80 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
> index aea89926bcc4f..8bdaae9be7d56 100644
> --- a/drivers/pci/controller/dwc/pci-layerscape.c
> +++ b/drivers/pci/controller/dwc/pci-layerscape.c
> @@ -35,11 +35,19 @@
>  #define PF_MCR_PTOMR		BIT(0)
>  #define PF_MCR_EXL2S		BIT(1)
>  
> +/* LS1021A PEXn PM Write Control Register */
> +#define SCFG_PEXPMWRCR(idx)	(0x5c + (idx) * 0x64)
> +#define PMXMTTURNOFF		BIT(31)
> +#define SCFG_PEXSFTRSTCR	0x190
> +#define PEXSR(idx)		BIT(idx)
> +
>  #define PCIE_IATU_NUM		6
>  
>  struct ls_pcie_drvdata {
>  	const u32 pf_off;
> +	const struct dw_pcie_host_ops *ops;
>  	int (*exit_from_l2)(struct dw_pcie_rp *pp);
> +	bool scfg_support;
>  	bool pm_support;
>  };
>  
> @@ -47,6 +55,8 @@ struct ls_pcie {
>  	struct dw_pcie *pci;
>  	const struct ls_pcie_drvdata *drvdata;
>  	void __iomem *pf_base;
> +	struct regmap *scfg;
> +	int index;
>  	bool big_endian;
>  };
>  
> @@ -171,18 +181,70 @@ static int ls_pcie_host_init(struct dw_pcie_rp *pp)
>  	return 0;
>  }
>  
> +static void scfg_pcie_send_turnoff_msg(struct regmap *scfg, u32 reg, u32 mask)
> +{
> +	/* Send PME_Turn_Off message */
> +	regmap_write_bits(scfg, reg, mask, mask);
> +
> +	/*
> +	 * There is no specific register to check for PME_To_Ack from endpoint.
> +	 * So on the safe side, wait for PCIE_PME_TO_L2_TIMEOUT_US.
> +	 */
> +	mdelay(PCIE_PME_TO_L2_TIMEOUT_US/1000);
> +
> +	/*
> +	 * Layerscape hardware reference manual recommends clearing the PMXMTTURNOFF bit
> +	 * to complete the PME_Turn_Off handshake.
> +	 */
> +	regmap_write_bits(scfg, reg, mask, 0);
> +}
> +
> +static void ls1021a_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
> +{
> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +	struct ls_pcie *pcie = to_ls_pcie(pci);
> +
> +	scfg_pcie_send_turnoff_msg(pcie->scfg, SCFG_PEXPMWRCR(pcie->index), PMXMTTURNOFF);
> +}
> +
> +static int scfg_pcie_exit_from_l2(struct regmap *scfg, u32 reg, u32 mask)
> +{
> +	/* Reset the PEX wrapper to bring the link out of L2 */
> +	regmap_write_bits(scfg, reg, mask, mask);
> +	regmap_write_bits(scfg, reg, mask, 0);
> +
> +	return 0;
> +}
> +
> +static int ls1021a_pcie_exit_from_l2(struct dw_pcie_rp *pp)
> +{
> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +	struct ls_pcie *pcie = to_ls_pcie(pci);
> +
> +	return scfg_pcie_exit_from_l2(pcie->scfg, SCFG_PEXSFTRSTCR, PEXSR(pcie->index));
> +}
> +
>  static const struct dw_pcie_host_ops ls_pcie_host_ops = {
>  	.host_init = ls_pcie_host_init,
>  	.pme_turn_off = ls_pcie_send_turnoff_msg,
>  };
>  
> +static const struct dw_pcie_host_ops ls1021a_pcie_host_ops = {
> +	.host_init = ls_pcie_host_init,
> +	.pme_turn_off = ls1021a_pcie_send_turnoff_msg,
> +};
> +
>  static const struct ls_pcie_drvdata ls1021a_drvdata = {
> -	.pm_support = false,
> +	.pm_support = true,
> +	.scfg_support = true,
> +	.ops = &ls1021a_pcie_host_ops,
> +	.exit_from_l2 = ls1021a_pcie_exit_from_l2,
>  };
>  
>  static const struct ls_pcie_drvdata layerscape_drvdata = {
>  	.pf_off = 0xc0000,
>  	.pm_support = true,
> +	.ops = &ls_pcie_host_ops;
>  	.exit_from_l2 = ls_pcie_exit_from_l2,
>  };
>  
> @@ -205,6 +267,8 @@ static int ls_pcie_probe(struct platform_device *pdev)
>  	struct dw_pcie *pci;
>  	struct ls_pcie *pcie;
>  	struct resource *dbi_base;
> +	u32 index[2];
> +	int ret;
>  
>  	pcie = devm_kzalloc(dev, sizeof(*pcie), GFP_KERNEL);
>  	if (!pcie)
> @@ -220,6 +284,7 @@ static int ls_pcie_probe(struct platform_device *pdev)
>  	pci->pp.ops = &ls_pcie_host_ops;

This should be removed now.

- Mani

>  
>  	pcie->pci = pci;
> +	pci->pp.ops = pcie->drvdata->ops;
>  
>  	dbi_base = platform_get_resource_byname(pdev, IORESOURCE_MEM, "regs");
>  	pci->dbi_base = devm_pci_remap_cfg_resource(dev, dbi_base);
> @@ -230,6 +295,20 @@ static int ls_pcie_probe(struct platform_device *pdev)
>  
>  	pcie->pf_base = pci->dbi_base + pcie->drvdata->pf_off;
>  
> +	if (pcie->drvdata->scfg_support) {
> +		pcie->scfg = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,pcie-scfg");
> +		if (IS_ERR(pcie->scfg)) {
> +			dev_err(dev, "No syscfg phandle specified\n");
> +			return PTR_ERR(pcie->scfg);
> +		}
> +
> +		ret = of_property_read_u32_array(dev->of_node, "fsl,pcie-scfg", index, 2);
> +		if (ret)
> +			return ret;
> +
> +		pcie->index = index[1];
> +	}
> +
>  	if (!ls_pcie_is_bridge(pcie))
>  		return -ENODEV;
>  
> -- 
> 2.34.1
> 

-- 
மணிவண்ணன் சதாசிவம்

[PATCH v5 3/4] PCI: layerscape(ep): Rename pf_* as pf_lut_*

[Frank Li]

'pf' and 'lut' is just difference name in difference chips, but basic it is
a MMIO base address plus an offset.

Rename it to avoid duplicate pf_* and lut_* in driver.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---

Notes:
    pf_lut is better than pf_* or lut* because some chip use 'pf', some chip
    use 'lut'.
    
    Change from v4 to v5
    - rename layerscape-ep code also
    change from v1 to v4
    - new patch at v3

 .../pci/controller/dwc/pci-layerscape-ep.c    | 16 ++++-----
 drivers/pci/controller/dwc/pci-layerscape.c   | 36 +++++++++----------
 2 files changed, 26 insertions(+), 26 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-layerscape-ep.c b/drivers/pci/controller/dwc/pci-layerscape-ep.c
index 3d3c50ef4b6ff..2ca339f938a86 100644
--- a/drivers/pci/controller/dwc/pci-layerscape-ep.c
+++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c
@@ -49,7 +49,7 @@ struct ls_pcie_ep {
 	bool				big_endian;
 };
 
-static u32 ls_lut_readl(struct ls_pcie_ep *pcie, u32 offset)
+static u32 ls_pcie_pf_lut_readl(struct ls_pcie_ep *pcie, u32 offset)
 {
 	struct dw_pcie *pci = pcie->pci;
 
@@ -59,7 +59,7 @@ static u32 ls_lut_readl(struct ls_pcie_ep *pcie, u32 offset)
 		return ioread32(pci->dbi_base + offset);
 }
 
-static void ls_lut_writel(struct ls_pcie_ep *pcie, u32 offset, u32 value)
+static void ls_pcie_pf_lut_writel(struct ls_pcie_ep *pcie, u32 offset, u32 value)
 {
 	struct dw_pcie *pci = pcie->pci;
 
@@ -76,8 +76,8 @@ static irqreturn_t ls_pcie_ep_event_handler(int irq, void *dev_id)
 	u32 val, cfg;
 	u8 offset;
 
-	val = ls_lut_readl(pcie, PEX_PF0_PME_MES_DR);
-	ls_lut_writel(pcie, PEX_PF0_PME_MES_DR, val);
+	val = ls_pcie_pf_lut_readl(pcie, PEX_PF0_PME_MES_DR);
+	ls_pcie_pf_lut_writel(pcie, PEX_PF0_PME_MES_DR, val);
 
 	if (!val)
 		return IRQ_NONE;
@@ -96,9 +96,9 @@ static irqreturn_t ls_pcie_ep_event_handler(int irq, void *dev_id)
 		dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, pcie->lnkcap);
 		dw_pcie_dbi_ro_wr_dis(pci);
 
-		cfg = ls_lut_readl(pcie, PEX_PF0_CONFIG);
+		cfg = ls_pcie_pf_lut_readl(pcie, PEX_PF0_CONFIG);
 		cfg |= PEX_PF0_CFG_READY;
-		ls_lut_writel(pcie, PEX_PF0_CONFIG, cfg);
+		ls_pcie_pf_lut_writel(pcie, PEX_PF0_CONFIG, cfg);
 		dw_pcie_ep_linkup(&pci->ep);
 
 		dev_dbg(pci->dev, "Link up\n");
@@ -130,10 +130,10 @@ static int ls_pcie_ep_interrupt_init(struct ls_pcie_ep *pcie,
 	}
 
 	/* Enable interrupts */
-	val = ls_lut_readl(pcie, PEX_PF0_PME_MES_IER);
+	val = ls_pcie_pf_lut_readl(pcie, PEX_PF0_PME_MES_IER);
 	val |=  PEX_PF0_PME_MES_IER_LDDIE | PEX_PF0_PME_MES_IER_HRDIE |
 		PEX_PF0_PME_MES_IER_LUDIE;
-	ls_lut_writel(pcie, PEX_PF0_PME_MES_IER, val);
+	ls_pcie_pf_lut_writel(pcie, PEX_PF0_PME_MES_IER, val);
 
 	return 0;
 }
diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
index 8bdaae9be7d56..a9151e98fde6f 100644
--- a/drivers/pci/controller/dwc/pci-layerscape.c
+++ b/drivers/pci/controller/dwc/pci-layerscape.c
@@ -44,7 +44,7 @@
 #define PCIE_IATU_NUM		6
 
 struct ls_pcie_drvdata {
-	const u32 pf_off;
+	const u32 pf_lut_off;
 	const struct dw_pcie_host_ops *ops;
 	int (*exit_from_l2)(struct dw_pcie_rp *pp);
 	bool scfg_support;
@@ -54,13 +54,13 @@ struct ls_pcie_drvdata {
 struct ls_pcie {
 	struct dw_pcie *pci;
 	const struct ls_pcie_drvdata *drvdata;
-	void __iomem *pf_base;
+	void __iomem *pf_lut_base;
 	struct regmap *scfg;
 	int index;
 	bool big_endian;
 };
 
-#define ls_pcie_pf_readl_addr(addr)	ls_pcie_pf_readl(pcie, addr)
+#define ls_pcie_pf_lut_readl_addr(addr)	ls_pcie_pf_lut_readl(pcie, addr)
 #define to_ls_pcie(x)	dev_get_drvdata((x)->dev)
 
 static bool ls_pcie_is_bridge(struct ls_pcie *pcie)
@@ -101,20 +101,20 @@ static void ls_pcie_fix_error_response(struct ls_pcie *pcie)
 	iowrite32(PCIE_ABSERR_SETTING, pci->dbi_base + PCIE_ABSERR);
 }
 
-static u32 ls_pcie_pf_readl(struct ls_pcie *pcie, u32 off)
+static u32 ls_pcie_pf_lut_readl(struct ls_pcie *pcie, u32 off)
 {
 	if (pcie->big_endian)
-		return ioread32be(pcie->pf_base + off);
+		return ioread32be(pcie->pf_lut_base + off);
 
-	return ioread32(pcie->pf_base + off);
+	return ioread32(pcie->pf_lut_base + off);
 }
 
-static void ls_pcie_pf_writel(struct ls_pcie *pcie, u32 off, u32 val)
+static void ls_pcie_pf_lut_writel(struct ls_pcie *pcie, u32 off, u32 val)
 {
 	if (pcie->big_endian)
-		iowrite32be(val, pcie->pf_base + off);
+		iowrite32be(val, pcie->pf_lut_base + off);
 	else
-		iowrite32(val, pcie->pf_base + off);
+		iowrite32(val, pcie->pf_lut_base + off);
 }
 
 static void ls_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
@@ -124,11 +124,11 @@ static void ls_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
 	u32 val;
 	int ret;
 
-	val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR);
+	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_PF_MCR);
 	val |= PF_MCR_PTOMR;
-	ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val);
+	ls_pcie_pf_lut_writel(pcie, LS_PCIE_PF_MCR, val);
 
-	ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR,
+	ret = readx_poll_timeout(ls_pcie_pf_lut_readl_addr, LS_PCIE_PF_MCR,
 				 val, !(val & PF_MCR_PTOMR),
 				 PCIE_PME_TO_L2_TIMEOUT_US/10,
 				 PCIE_PME_TO_L2_TIMEOUT_US);
@@ -147,15 +147,15 @@ static int ls_pcie_exit_from_l2(struct dw_pcie_rp *pp)
 	 * Set PF_MCR_EXL2S bit in LS_PCIE_PF_MCR register for the link
 	 * to exit L2 state.
 	 */
-	val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR);
+	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_PF_MCR);
 	val |= PF_MCR_EXL2S;
-	ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val);
+	ls_pcie_pf_lut_writel(pcie, LS_PCIE_PF_MCR, val);
 
 	/*
 	 * L2 exit timeout of 10ms is not defined in the specifications,
 	 * it was chosen based on empirical observations.
 	 */
-	ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR,
+	ret = readx_poll_timeout(ls_pcie_pf_lut_readl_addr, LS_PCIE_PF_MCR,
 				 val, !(val & PF_MCR_EXL2S),
 				 1000,
 				 10000);
@@ -242,9 +242,9 @@ static const struct ls_pcie_drvdata ls1021a_drvdata = {
 };
 
 static const struct ls_pcie_drvdata layerscape_drvdata = {
-	.pf_off = 0xc0000,
+	.pf_lut_off = 0xc0000,
 	.pm_support = true,
-	.ops = &ls_pcie_host_ops;
+	.ops = &ls_pcie_host_ops,
 	.exit_from_l2 = ls_pcie_exit_from_l2,
 };
 
@@ -293,7 +293,7 @@ static int ls_pcie_probe(struct platform_device *pdev)
 
 	pcie->big_endian = of_property_read_bool(dev->of_node, "big-endian");
 
-	pcie->pf_base = pci->dbi_base + pcie->drvdata->pf_off;
+	pcie->pf_lut_base = pci->dbi_base + pcie->drvdata->pf_lut_off;
 
 	if (pcie->drvdata->scfg_support) {
 		pcie->scfg = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,pcie-scfg");
-- 
2.34.1

[PATCH v5 3/4] PCI: layerscape(ep): Rename pf_* as pf_lut_*

[Frank Li]

'pf' and 'lut' is just difference name in difference chips, but basic it is
a MMIO base address plus an offset.

Rename it to avoid duplicate pf_* and lut_* in driver.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---

Notes:
    pf_lut is better than pf_* or lut* because some chip use 'pf', some chip
    use 'lut'.
    
    Change from v4 to v5
    - rename layerscape-ep code also
    change from v1 to v4
    - new patch at v3

 .../pci/controller/dwc/pci-layerscape-ep.c    | 16 ++++-----
 drivers/pci/controller/dwc/pci-layerscape.c   | 36 +++++++++----------
 2 files changed, 26 insertions(+), 26 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-layerscape-ep.c b/drivers/pci/controller/dwc/pci-layerscape-ep.c
index 3d3c50ef4b6ff..2ca339f938a86 100644
--- a/drivers/pci/controller/dwc/pci-layerscape-ep.c
+++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c
@@ -49,7 +49,7 @@ struct ls_pcie_ep {
 	bool				big_endian;
 };
 
-static u32 ls_lut_readl(struct ls_pcie_ep *pcie, u32 offset)
+static u32 ls_pcie_pf_lut_readl(struct ls_pcie_ep *pcie, u32 offset)
 {
 	struct dw_pcie *pci = pcie->pci;
 
@@ -59,7 +59,7 @@ static u32 ls_lut_readl(struct ls_pcie_ep *pcie, u32 offset)
 		return ioread32(pci->dbi_base + offset);
 }
 
-static void ls_lut_writel(struct ls_pcie_ep *pcie, u32 offset, u32 value)
+static void ls_pcie_pf_lut_writel(struct ls_pcie_ep *pcie, u32 offset, u32 value)
 {
 	struct dw_pcie *pci = pcie->pci;
 
@@ -76,8 +76,8 @@ static irqreturn_t ls_pcie_ep_event_handler(int irq, void *dev_id)
 	u32 val, cfg;
 	u8 offset;
 
-	val = ls_lut_readl(pcie, PEX_PF0_PME_MES_DR);
-	ls_lut_writel(pcie, PEX_PF0_PME_MES_DR, val);
+	val = ls_pcie_pf_lut_readl(pcie, PEX_PF0_PME_MES_DR);
+	ls_pcie_pf_lut_writel(pcie, PEX_PF0_PME_MES_DR, val);
 
 	if (!val)
 		return IRQ_NONE;
@@ -96,9 +96,9 @@ static irqreturn_t ls_pcie_ep_event_handler(int irq, void *dev_id)
 		dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, pcie->lnkcap);
 		dw_pcie_dbi_ro_wr_dis(pci);
 
-		cfg = ls_lut_readl(pcie, PEX_PF0_CONFIG);
+		cfg = ls_pcie_pf_lut_readl(pcie, PEX_PF0_CONFIG);
 		cfg |= PEX_PF0_CFG_READY;
-		ls_lut_writel(pcie, PEX_PF0_CONFIG, cfg);
+		ls_pcie_pf_lut_writel(pcie, PEX_PF0_CONFIG, cfg);
 		dw_pcie_ep_linkup(&pci->ep);
 
 		dev_dbg(pci->dev, "Link up\n");
@@ -130,10 +130,10 @@ static int ls_pcie_ep_interrupt_init(struct ls_pcie_ep *pcie,
 	}
 
 	/* Enable interrupts */
-	val = ls_lut_readl(pcie, PEX_PF0_PME_MES_IER);
+	val = ls_pcie_pf_lut_readl(pcie, PEX_PF0_PME_MES_IER);
 	val |=  PEX_PF0_PME_MES_IER_LDDIE | PEX_PF0_PME_MES_IER_HRDIE |
 		PEX_PF0_PME_MES_IER_LUDIE;
-	ls_lut_writel(pcie, PEX_PF0_PME_MES_IER, val);
+	ls_pcie_pf_lut_writel(pcie, PEX_PF0_PME_MES_IER, val);
 
 	return 0;
 }
diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
index 8bdaae9be7d56..a9151e98fde6f 100644
--- a/drivers/pci/controller/dwc/pci-layerscape.c
+++ b/drivers/pci/controller/dwc/pci-layerscape.c
@@ -44,7 +44,7 @@
 #define PCIE_IATU_NUM		6
 
 struct ls_pcie_drvdata {
-	const u32 pf_off;
+	const u32 pf_lut_off;
 	const struct dw_pcie_host_ops *ops;
 	int (*exit_from_l2)(struct dw_pcie_rp *pp);
 	bool scfg_support;
@@ -54,13 +54,13 @@ struct ls_pcie_drvdata {
 struct ls_pcie {
 	struct dw_pcie *pci;
 	const struct ls_pcie_drvdata *drvdata;
-	void __iomem *pf_base;
+	void __iomem *pf_lut_base;
 	struct regmap *scfg;
 	int index;
 	bool big_endian;
 };
 
-#define ls_pcie_pf_readl_addr(addr)	ls_pcie_pf_readl(pcie, addr)
+#define ls_pcie_pf_lut_readl_addr(addr)	ls_pcie_pf_lut_readl(pcie, addr)
 #define to_ls_pcie(x)	dev_get_drvdata((x)->dev)
 
 static bool ls_pcie_is_bridge(struct ls_pcie *pcie)
@@ -101,20 +101,20 @@ static void ls_pcie_fix_error_response(struct ls_pcie *pcie)
 	iowrite32(PCIE_ABSERR_SETTING, pci->dbi_base + PCIE_ABSERR);
 }
 
-static u32 ls_pcie_pf_readl(struct ls_pcie *pcie, u32 off)
+static u32 ls_pcie_pf_lut_readl(struct ls_pcie *pcie, u32 off)
 {
 	if (pcie->big_endian)
-		return ioread32be(pcie->pf_base + off);
+		return ioread32be(pcie->pf_lut_base + off);
 
-	return ioread32(pcie->pf_base + off);
+	return ioread32(pcie->pf_lut_base + off);
 }
 
-static void ls_pcie_pf_writel(struct ls_pcie *pcie, u32 off, u32 val)
+static void ls_pcie_pf_lut_writel(struct ls_pcie *pcie, u32 off, u32 val)
 {
 	if (pcie->big_endian)
-		iowrite32be(val, pcie->pf_base + off);
+		iowrite32be(val, pcie->pf_lut_base + off);
 	else
-		iowrite32(val, pcie->pf_base + off);
+		iowrite32(val, pcie->pf_lut_base + off);
 }
 
 static void ls_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
@@ -124,11 +124,11 @@ static void ls_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
 	u32 val;
 	int ret;
 
-	val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR);
+	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_PF_MCR);
 	val |= PF_MCR_PTOMR;
-	ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val);
+	ls_pcie_pf_lut_writel(pcie, LS_PCIE_PF_MCR, val);
 
-	ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR,
+	ret = readx_poll_timeout(ls_pcie_pf_lut_readl_addr, LS_PCIE_PF_MCR,
 				 val, !(val & PF_MCR_PTOMR),
 				 PCIE_PME_TO_L2_TIMEOUT_US/10,
 				 PCIE_PME_TO_L2_TIMEOUT_US);
@@ -147,15 +147,15 @@ static int ls_pcie_exit_from_l2(struct dw_pcie_rp *pp)
 	 * Set PF_MCR_EXL2S bit in LS_PCIE_PF_MCR register for the link
 	 * to exit L2 state.
 	 */
-	val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR);
+	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_PF_MCR);
 	val |= PF_MCR_EXL2S;
-	ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val);
+	ls_pcie_pf_lut_writel(pcie, LS_PCIE_PF_MCR, val);
 
 	/*
 	 * L2 exit timeout of 10ms is not defined in the specifications,
 	 * it was chosen based on empirical observations.
 	 */
-	ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR,
+	ret = readx_poll_timeout(ls_pcie_pf_lut_readl_addr, LS_PCIE_PF_MCR,
 				 val, !(val & PF_MCR_EXL2S),
 				 1000,
 				 10000);
@@ -242,9 +242,9 @@ static const struct ls_pcie_drvdata ls1021a_drvdata = {
 };
 
 static const struct ls_pcie_drvdata layerscape_drvdata = {
-	.pf_off = 0xc0000,
+	.pf_lut_off = 0xc0000,
 	.pm_support = true,
-	.ops = &ls_pcie_host_ops;
+	.ops = &ls_pcie_host_ops,
 	.exit_from_l2 = ls_pcie_exit_from_l2,
 };
 
@@ -293,7 +293,7 @@ static int ls_pcie_probe(struct platform_device *pdev)
 
 	pcie->big_endian = of_property_read_bool(dev->of_node, "big-endian");
 
-	pcie->pf_base = pci->dbi_base + pcie->drvdata->pf_off;
+	pcie->pf_lut_base = pci->dbi_base + pcie->drvdata->pf_lut_off;
 
 	if (pcie->drvdata->scfg_support) {
 		pcie->scfg = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,pcie-scfg");
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 3/4] PCI: layerscape(ep): Rename pf_* as pf_lut_*

[Frank Li]

'pf' and 'lut' is just difference name in difference chips, but basic it is
a MMIO base address plus an offset.

Rename it to avoid duplicate pf_* and lut_* in driver.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---

Notes:
    pf_lut is better than pf_* or lut* because some chip use 'pf', some chip
    use 'lut'.
    
    Change from v4 to v5
    - rename layerscape-ep code also
    change from v1 to v4
    - new patch at v3

 .../pci/controller/dwc/pci-layerscape-ep.c    | 16 ++++-----
 drivers/pci/controller/dwc/pci-layerscape.c   | 36 +++++++++----------
 2 files changed, 26 insertions(+), 26 deletions(-)

diff --git a/drivers/pci/controller/dwc/pci-layerscape-ep.c b/drivers/pci/controller/dwc/pci-layerscape-ep.c
index 3d3c50ef4b6ff..2ca339f938a86 100644
--- a/drivers/pci/controller/dwc/pci-layerscape-ep.c
+++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c
@@ -49,7 +49,7 @@ struct ls_pcie_ep {
 	bool				big_endian;
 };
 
-static u32 ls_lut_readl(struct ls_pcie_ep *pcie, u32 offset)
+static u32 ls_pcie_pf_lut_readl(struct ls_pcie_ep *pcie, u32 offset)
 {
 	struct dw_pcie *pci = pcie->pci;
 
@@ -59,7 +59,7 @@ static u32 ls_lut_readl(struct ls_pcie_ep *pcie, u32 offset)
 		return ioread32(pci->dbi_base + offset);
 }
 
-static void ls_lut_writel(struct ls_pcie_ep *pcie, u32 offset, u32 value)
+static void ls_pcie_pf_lut_writel(struct ls_pcie_ep *pcie, u32 offset, u32 value)
 {
 	struct dw_pcie *pci = pcie->pci;
 
@@ -76,8 +76,8 @@ static irqreturn_t ls_pcie_ep_event_handler(int irq, void *dev_id)
 	u32 val, cfg;
 	u8 offset;
 
-	val = ls_lut_readl(pcie, PEX_PF0_PME_MES_DR);
-	ls_lut_writel(pcie, PEX_PF0_PME_MES_DR, val);
+	val = ls_pcie_pf_lut_readl(pcie, PEX_PF0_PME_MES_DR);
+	ls_pcie_pf_lut_writel(pcie, PEX_PF0_PME_MES_DR, val);
 
 	if (!val)
 		return IRQ_NONE;
@@ -96,9 +96,9 @@ static irqreturn_t ls_pcie_ep_event_handler(int irq, void *dev_id)
 		dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, pcie->lnkcap);
 		dw_pcie_dbi_ro_wr_dis(pci);
 
-		cfg = ls_lut_readl(pcie, PEX_PF0_CONFIG);
+		cfg = ls_pcie_pf_lut_readl(pcie, PEX_PF0_CONFIG);
 		cfg |= PEX_PF0_CFG_READY;
-		ls_lut_writel(pcie, PEX_PF0_CONFIG, cfg);
+		ls_pcie_pf_lut_writel(pcie, PEX_PF0_CONFIG, cfg);
 		dw_pcie_ep_linkup(&pci->ep);
 
 		dev_dbg(pci->dev, "Link up\n");
@@ -130,10 +130,10 @@ static int ls_pcie_ep_interrupt_init(struct ls_pcie_ep *pcie,
 	}
 
 	/* Enable interrupts */
-	val = ls_lut_readl(pcie, PEX_PF0_PME_MES_IER);
+	val = ls_pcie_pf_lut_readl(pcie, PEX_PF0_PME_MES_IER);
 	val |=  PEX_PF0_PME_MES_IER_LDDIE | PEX_PF0_PME_MES_IER_HRDIE |
 		PEX_PF0_PME_MES_IER_LUDIE;
-	ls_lut_writel(pcie, PEX_PF0_PME_MES_IER, val);
+	ls_pcie_pf_lut_writel(pcie, PEX_PF0_PME_MES_IER, val);
 
 	return 0;
 }
diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
index 8bdaae9be7d56..a9151e98fde6f 100644
--- a/drivers/pci/controller/dwc/pci-layerscape.c
+++ b/drivers/pci/controller/dwc/pci-layerscape.c
@@ -44,7 +44,7 @@
 #define PCIE_IATU_NUM		6
 
 struct ls_pcie_drvdata {
-	const u32 pf_off;
+	const u32 pf_lut_off;
 	const struct dw_pcie_host_ops *ops;
 	int (*exit_from_l2)(struct dw_pcie_rp *pp);
 	bool scfg_support;
@@ -54,13 +54,13 @@ struct ls_pcie_drvdata {
 struct ls_pcie {
 	struct dw_pcie *pci;
 	const struct ls_pcie_drvdata *drvdata;
-	void __iomem *pf_base;
+	void __iomem *pf_lut_base;
 	struct regmap *scfg;
 	int index;
 	bool big_endian;
 };
 
-#define ls_pcie_pf_readl_addr(addr)	ls_pcie_pf_readl(pcie, addr)
+#define ls_pcie_pf_lut_readl_addr(addr)	ls_pcie_pf_lut_readl(pcie, addr)
 #define to_ls_pcie(x)	dev_get_drvdata((x)->dev)
 
 static bool ls_pcie_is_bridge(struct ls_pcie *pcie)
@@ -101,20 +101,20 @@ static void ls_pcie_fix_error_response(struct ls_pcie *pcie)
 	iowrite32(PCIE_ABSERR_SETTING, pci->dbi_base + PCIE_ABSERR);
 }
 
-static u32 ls_pcie_pf_readl(struct ls_pcie *pcie, u32 off)
+static u32 ls_pcie_pf_lut_readl(struct ls_pcie *pcie, u32 off)
 {
 	if (pcie->big_endian)
-		return ioread32be(pcie->pf_base + off);
+		return ioread32be(pcie->pf_lut_base + off);
 
-	return ioread32(pcie->pf_base + off);
+	return ioread32(pcie->pf_lut_base + off);
 }
 
-static void ls_pcie_pf_writel(struct ls_pcie *pcie, u32 off, u32 val)
+static void ls_pcie_pf_lut_writel(struct ls_pcie *pcie, u32 off, u32 val)
 {
 	if (pcie->big_endian)
-		iowrite32be(val, pcie->pf_base + off);
+		iowrite32be(val, pcie->pf_lut_base + off);
 	else
-		iowrite32(val, pcie->pf_base + off);
+		iowrite32(val, pcie->pf_lut_base + off);
 }
 
 static void ls_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
@@ -124,11 +124,11 @@ static void ls_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
 	u32 val;
 	int ret;
 
-	val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR);
+	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_PF_MCR);
 	val |= PF_MCR_PTOMR;
-	ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val);
+	ls_pcie_pf_lut_writel(pcie, LS_PCIE_PF_MCR, val);
 
-	ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR,
+	ret = readx_poll_timeout(ls_pcie_pf_lut_readl_addr, LS_PCIE_PF_MCR,
 				 val, !(val & PF_MCR_PTOMR),
 				 PCIE_PME_TO_L2_TIMEOUT_US/10,
 				 PCIE_PME_TO_L2_TIMEOUT_US);
@@ -147,15 +147,15 @@ static int ls_pcie_exit_from_l2(struct dw_pcie_rp *pp)
 	 * Set PF_MCR_EXL2S bit in LS_PCIE_PF_MCR register for the link
 	 * to exit L2 state.
 	 */
-	val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR);
+	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_PF_MCR);
 	val |= PF_MCR_EXL2S;
-	ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val);
+	ls_pcie_pf_lut_writel(pcie, LS_PCIE_PF_MCR, val);
 
 	/*
 	 * L2 exit timeout of 10ms is not defined in the specifications,
 	 * it was chosen based on empirical observations.
 	 */
-	ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR,
+	ret = readx_poll_timeout(ls_pcie_pf_lut_readl_addr, LS_PCIE_PF_MCR,
 				 val, !(val & PF_MCR_EXL2S),
 				 1000,
 				 10000);
@@ -242,9 +242,9 @@ static const struct ls_pcie_drvdata ls1021a_drvdata = {
 };
 
 static const struct ls_pcie_drvdata layerscape_drvdata = {
-	.pf_off = 0xc0000,
+	.pf_lut_off = 0xc0000,
 	.pm_support = true,
-	.ops = &ls_pcie_host_ops;
+	.ops = &ls_pcie_host_ops,
 	.exit_from_l2 = ls_pcie_exit_from_l2,
 };
 
@@ -293,7 +293,7 @@ static int ls_pcie_probe(struct platform_device *pdev)
 
 	pcie->big_endian = of_property_read_bool(dev->of_node, "big-endian");
 
-	pcie->pf_base = pci->dbi_base + pcie->drvdata->pf_off;
+	pcie->pf_lut_base = pci->dbi_base + pcie->drvdata->pf_lut_off;
 
 	if (pcie->drvdata->scfg_support) {
 		pcie->scfg = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,pcie-scfg");
-- 
2.34.1

RE: [PATCH v5 3/4] PCI: layerscape(ep): Rename pf_* as pf_lut_*

[Roy Zang]

> From: Frank Li <frank.li@nxp.com>
> Subject: [PATCH v5 3/4] PCI: layerscape(ep): Rename pf_* as pf_lut_*
> 
> 'pf' and 'lut' is just difference name in difference chips, but basic it is a MMIO
> base address plus an offset.
> 
> Rename it to avoid duplicate pf_* and lut_* in driver.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by:  Roy Zang <Roy.Zang@nxp.com>
Roy

RE: [PATCH v5 3/4] PCI: layerscape(ep): Rename pf_* as pf_lut_*

[Roy Zang]

> From: Frank Li <frank.li@nxp.com>
> Subject: [PATCH v5 3/4] PCI: layerscape(ep): Rename pf_* as pf_lut_*
> 
> 'pf' and 'lut' is just difference name in difference chips, but basic it is a MMIO
> base address plus an offset.
> 
> Rename it to avoid duplicate pf_* and lut_* in driver.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by:  Roy Zang <Roy.Zang@nxp.com>
Roy

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

RE: [PATCH v5 3/4] PCI: layerscape(ep): Rename pf_* as pf_lut_*

[Roy Zang]

> From: Frank Li <frank.li@nxp.com>
> Subject: [PATCH v5 3/4] PCI: layerscape(ep): Rename pf_* as pf_lut_*
> 
> 'pf' and 'lut' is just difference name in difference chips, but basic it is a MMIO
> base address plus an offset.
> 
> Rename it to avoid duplicate pf_* and lut_* in driver.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by:  Roy Zang <Roy.Zang@nxp.com>
Roy

Re: [PATCH v5 3/4] PCI: layerscape(ep): Rename pf_* as pf_lut_*

[Manivannan Sadhasivam]

On Fri, Dec 01, 2023 at 11:17:11AM -0500, Frank Li wrote:
> 'pf' and 'lut' is just difference name in difference chips, but basic it is
> a MMIO base address plus an offset.
> 
> Rename it to avoid duplicate pf_* and lut_* in driver.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>

One comment below. With that addressed,

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

> ---
> 
> Notes:
>     pf_lut is better than pf_* or lut* because some chip use 'pf', some chip
>     use 'lut'.
>     
>     Change from v4 to v5
>     - rename layerscape-ep code also
>     change from v1 to v4
>     - new patch at v3
> 
>  .../pci/controller/dwc/pci-layerscape-ep.c    | 16 ++++-----
>  drivers/pci/controller/dwc/pci-layerscape.c   | 36 +++++++++----------
>  2 files changed, 26 insertions(+), 26 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-layerscape-ep.c b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> index 3d3c50ef4b6ff..2ca339f938a86 100644
> --- a/drivers/pci/controller/dwc/pci-layerscape-ep.c
> +++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> @@ -49,7 +49,7 @@ struct ls_pcie_ep {
>  	bool				big_endian;
>  };
>  
> -static u32 ls_lut_readl(struct ls_pcie_ep *pcie, u32 offset)
> +static u32 ls_pcie_pf_lut_readl(struct ls_pcie_ep *pcie, u32 offset)
>  {
>  	struct dw_pcie *pci = pcie->pci;
>  
> @@ -59,7 +59,7 @@ static u32 ls_lut_readl(struct ls_pcie_ep *pcie, u32 offset)
>  		return ioread32(pci->dbi_base + offset);
>  }
>  
> -static void ls_lut_writel(struct ls_pcie_ep *pcie, u32 offset, u32 value)
> +static void ls_pcie_pf_lut_writel(struct ls_pcie_ep *pcie, u32 offset, u32 value)
>  {
>  	struct dw_pcie *pci = pcie->pci;
>  
> @@ -76,8 +76,8 @@ static irqreturn_t ls_pcie_ep_event_handler(int irq, void *dev_id)
>  	u32 val, cfg;
>  	u8 offset;
>  
> -	val = ls_lut_readl(pcie, PEX_PF0_PME_MES_DR);
> -	ls_lut_writel(pcie, PEX_PF0_PME_MES_DR, val);
> +	val = ls_pcie_pf_lut_readl(pcie, PEX_PF0_PME_MES_DR);
> +	ls_pcie_pf_lut_writel(pcie, PEX_PF0_PME_MES_DR, val);
>  
>  	if (!val)
>  		return IRQ_NONE;
> @@ -96,9 +96,9 @@ static irqreturn_t ls_pcie_ep_event_handler(int irq, void *dev_id)
>  		dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, pcie->lnkcap);
>  		dw_pcie_dbi_ro_wr_dis(pci);
>  
> -		cfg = ls_lut_readl(pcie, PEX_PF0_CONFIG);
> +		cfg = ls_pcie_pf_lut_readl(pcie, PEX_PF0_CONFIG);
>  		cfg |= PEX_PF0_CFG_READY;
> -		ls_lut_writel(pcie, PEX_PF0_CONFIG, cfg);
> +		ls_pcie_pf_lut_writel(pcie, PEX_PF0_CONFIG, cfg);
>  		dw_pcie_ep_linkup(&pci->ep);
>  
>  		dev_dbg(pci->dev, "Link up\n");
> @@ -130,10 +130,10 @@ static int ls_pcie_ep_interrupt_init(struct ls_pcie_ep *pcie,
>  	}
>  
>  	/* Enable interrupts */
> -	val = ls_lut_readl(pcie, PEX_PF0_PME_MES_IER);
> +	val = ls_pcie_pf_lut_readl(pcie, PEX_PF0_PME_MES_IER);
>  	val |=  PEX_PF0_PME_MES_IER_LDDIE | PEX_PF0_PME_MES_IER_HRDIE |
>  		PEX_PF0_PME_MES_IER_LUDIE;
> -	ls_lut_writel(pcie, PEX_PF0_PME_MES_IER, val);
> +	ls_pcie_pf_lut_writel(pcie, PEX_PF0_PME_MES_IER, val);
>  
>  	return 0;
>  }
> diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
> index 8bdaae9be7d56..a9151e98fde6f 100644
> --- a/drivers/pci/controller/dwc/pci-layerscape.c
> +++ b/drivers/pci/controller/dwc/pci-layerscape.c
> @@ -44,7 +44,7 @@
>  #define PCIE_IATU_NUM		6
>  
>  struct ls_pcie_drvdata {
> -	const u32 pf_off;
> +	const u32 pf_lut_off;
>  	const struct dw_pcie_host_ops *ops;
>  	int (*exit_from_l2)(struct dw_pcie_rp *pp);
>  	bool scfg_support;
> @@ -54,13 +54,13 @@ struct ls_pcie_drvdata {
>  struct ls_pcie {
>  	struct dw_pcie *pci;
>  	const struct ls_pcie_drvdata *drvdata;
> -	void __iomem *pf_base;
> +	void __iomem *pf_lut_base;
>  	struct regmap *scfg;
>  	int index;
>  	bool big_endian;
>  };
>  
> -#define ls_pcie_pf_readl_addr(addr)	ls_pcie_pf_readl(pcie, addr)
> +#define ls_pcie_pf_lut_readl_addr(addr)	ls_pcie_pf_lut_readl(pcie, addr)
>  #define to_ls_pcie(x)	dev_get_drvdata((x)->dev)
>  
>  static bool ls_pcie_is_bridge(struct ls_pcie *pcie)
> @@ -101,20 +101,20 @@ static void ls_pcie_fix_error_response(struct ls_pcie *pcie)
>  	iowrite32(PCIE_ABSERR_SETTING, pci->dbi_base + PCIE_ABSERR);
>  }
>  
> -static u32 ls_pcie_pf_readl(struct ls_pcie *pcie, u32 off)
> +static u32 ls_pcie_pf_lut_readl(struct ls_pcie *pcie, u32 off)
>  {
>  	if (pcie->big_endian)
> -		return ioread32be(pcie->pf_base + off);
> +		return ioread32be(pcie->pf_lut_base + off);
>  
> -	return ioread32(pcie->pf_base + off);
> +	return ioread32(pcie->pf_lut_base + off);
>  }
>  
> -static void ls_pcie_pf_writel(struct ls_pcie *pcie, u32 off, u32 val)
> +static void ls_pcie_pf_lut_writel(struct ls_pcie *pcie, u32 off, u32 val)
>  {
>  	if (pcie->big_endian)
> -		iowrite32be(val, pcie->pf_base + off);
> +		iowrite32be(val, pcie->pf_lut_base + off);
>  	else
> -		iowrite32(val, pcie->pf_base + off);
> +		iowrite32(val, pcie->pf_lut_base + off);
>  }
>  
>  static void ls_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
> @@ -124,11 +124,11 @@ static void ls_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
>  	u32 val;
>  	int ret;
>  
> -	val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR);
> +	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_PF_MCR);
>  	val |= PF_MCR_PTOMR;
> -	ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val);
> +	ls_pcie_pf_lut_writel(pcie, LS_PCIE_PF_MCR, val);
>  
> -	ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR,
> +	ret = readx_poll_timeout(ls_pcie_pf_lut_readl_addr, LS_PCIE_PF_MCR,
>  				 val, !(val & PF_MCR_PTOMR),
>  				 PCIE_PME_TO_L2_TIMEOUT_US/10,
>  				 PCIE_PME_TO_L2_TIMEOUT_US);
> @@ -147,15 +147,15 @@ static int ls_pcie_exit_from_l2(struct dw_pcie_rp *pp)
>  	 * Set PF_MCR_EXL2S bit in LS_PCIE_PF_MCR register for the link
>  	 * to exit L2 state.
>  	 */
> -	val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR);
> +	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_PF_MCR);
>  	val |= PF_MCR_EXL2S;
> -	ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val);
> +	ls_pcie_pf_lut_writel(pcie, LS_PCIE_PF_MCR, val);
>  
>  	/*
>  	 * L2 exit timeout of 10ms is not defined in the specifications,
>  	 * it was chosen based on empirical observations.
>  	 */
> -	ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR,
> +	ret = readx_poll_timeout(ls_pcie_pf_lut_readl_addr, LS_PCIE_PF_MCR,
>  				 val, !(val & PF_MCR_EXL2S),
>  				 1000,
>  				 10000);
> @@ -242,9 +242,9 @@ static const struct ls_pcie_drvdata ls1021a_drvdata = {
>  };
>  
>  static const struct ls_pcie_drvdata layerscape_drvdata = {
> -	.pf_off = 0xc0000,
> +	.pf_lut_off = 0xc0000,
>  	.pm_support = true,
> -	.ops = &ls_pcie_host_ops;
> +	.ops = &ls_pcie_host_ops,

This change should be part of the previous patch.

- Mani

>  	.exit_from_l2 = ls_pcie_exit_from_l2,
>  };
>  
> @@ -293,7 +293,7 @@ static int ls_pcie_probe(struct platform_device *pdev)
>  
>  	pcie->big_endian = of_property_read_bool(dev->of_node, "big-endian");
>  
> -	pcie->pf_base = pci->dbi_base + pcie->drvdata->pf_off;
> +	pcie->pf_lut_base = pci->dbi_base + pcie->drvdata->pf_lut_off;
>  
>  	if (pcie->drvdata->scfg_support) {
>  		pcie->scfg = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,pcie-scfg");
> -- 
> 2.34.1
> 

-- 
மணிவண்ணன் சதாசிவம்

Re: [PATCH v5 3/4] PCI: layerscape(ep): Rename pf_* as pf_lut_*

[Manivannan Sadhasivam]

On Fri, Dec 01, 2023 at 11:17:11AM -0500, Frank Li wrote:
> 'pf' and 'lut' is just difference name in difference chips, but basic it is
> a MMIO base address plus an offset.
> 
> Rename it to avoid duplicate pf_* and lut_* in driver.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>

One comment below. With that addressed,

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

> ---
> 
> Notes:
>     pf_lut is better than pf_* or lut* because some chip use 'pf', some chip
>     use 'lut'.
>     
>     Change from v4 to v5
>     - rename layerscape-ep code also
>     change from v1 to v4
>     - new patch at v3
> 
>  .../pci/controller/dwc/pci-layerscape-ep.c    | 16 ++++-----
>  drivers/pci/controller/dwc/pci-layerscape.c   | 36 +++++++++----------
>  2 files changed, 26 insertions(+), 26 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-layerscape-ep.c b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> index 3d3c50ef4b6ff..2ca339f938a86 100644
> --- a/drivers/pci/controller/dwc/pci-layerscape-ep.c
> +++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> @@ -49,7 +49,7 @@ struct ls_pcie_ep {
>  	bool				big_endian;
>  };
>  
> -static u32 ls_lut_readl(struct ls_pcie_ep *pcie, u32 offset)
> +static u32 ls_pcie_pf_lut_readl(struct ls_pcie_ep *pcie, u32 offset)
>  {
>  	struct dw_pcie *pci = pcie->pci;
>  
> @@ -59,7 +59,7 @@ static u32 ls_lut_readl(struct ls_pcie_ep *pcie, u32 offset)
>  		return ioread32(pci->dbi_base + offset);
>  }
>  
> -static void ls_lut_writel(struct ls_pcie_ep *pcie, u32 offset, u32 value)
> +static void ls_pcie_pf_lut_writel(struct ls_pcie_ep *pcie, u32 offset, u32 value)
>  {
>  	struct dw_pcie *pci = pcie->pci;
>  
> @@ -76,8 +76,8 @@ static irqreturn_t ls_pcie_ep_event_handler(int irq, void *dev_id)
>  	u32 val, cfg;
>  	u8 offset;
>  
> -	val = ls_lut_readl(pcie, PEX_PF0_PME_MES_DR);
> -	ls_lut_writel(pcie, PEX_PF0_PME_MES_DR, val);
> +	val = ls_pcie_pf_lut_readl(pcie, PEX_PF0_PME_MES_DR);
> +	ls_pcie_pf_lut_writel(pcie, PEX_PF0_PME_MES_DR, val);
>  
>  	if (!val)
>  		return IRQ_NONE;
> @@ -96,9 +96,9 @@ static irqreturn_t ls_pcie_ep_event_handler(int irq, void *dev_id)
>  		dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, pcie->lnkcap);
>  		dw_pcie_dbi_ro_wr_dis(pci);
>  
> -		cfg = ls_lut_readl(pcie, PEX_PF0_CONFIG);
> +		cfg = ls_pcie_pf_lut_readl(pcie, PEX_PF0_CONFIG);
>  		cfg |= PEX_PF0_CFG_READY;
> -		ls_lut_writel(pcie, PEX_PF0_CONFIG, cfg);
> +		ls_pcie_pf_lut_writel(pcie, PEX_PF0_CONFIG, cfg);
>  		dw_pcie_ep_linkup(&pci->ep);
>  
>  		dev_dbg(pci->dev, "Link up\n");
> @@ -130,10 +130,10 @@ static int ls_pcie_ep_interrupt_init(struct ls_pcie_ep *pcie,
>  	}
>  
>  	/* Enable interrupts */
> -	val = ls_lut_readl(pcie, PEX_PF0_PME_MES_IER);
> +	val = ls_pcie_pf_lut_readl(pcie, PEX_PF0_PME_MES_IER);
>  	val |=  PEX_PF0_PME_MES_IER_LDDIE | PEX_PF0_PME_MES_IER_HRDIE |
>  		PEX_PF0_PME_MES_IER_LUDIE;
> -	ls_lut_writel(pcie, PEX_PF0_PME_MES_IER, val);
> +	ls_pcie_pf_lut_writel(pcie, PEX_PF0_PME_MES_IER, val);
>  
>  	return 0;
>  }
> diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
> index 8bdaae9be7d56..a9151e98fde6f 100644
> --- a/drivers/pci/controller/dwc/pci-layerscape.c
> +++ b/drivers/pci/controller/dwc/pci-layerscape.c
> @@ -44,7 +44,7 @@
>  #define PCIE_IATU_NUM		6
>  
>  struct ls_pcie_drvdata {
> -	const u32 pf_off;
> +	const u32 pf_lut_off;
>  	const struct dw_pcie_host_ops *ops;
>  	int (*exit_from_l2)(struct dw_pcie_rp *pp);
>  	bool scfg_support;
> @@ -54,13 +54,13 @@ struct ls_pcie_drvdata {
>  struct ls_pcie {
>  	struct dw_pcie *pci;
>  	const struct ls_pcie_drvdata *drvdata;
> -	void __iomem *pf_base;
> +	void __iomem *pf_lut_base;
>  	struct regmap *scfg;
>  	int index;
>  	bool big_endian;
>  };
>  
> -#define ls_pcie_pf_readl_addr(addr)	ls_pcie_pf_readl(pcie, addr)
> +#define ls_pcie_pf_lut_readl_addr(addr)	ls_pcie_pf_lut_readl(pcie, addr)
>  #define to_ls_pcie(x)	dev_get_drvdata((x)->dev)
>  
>  static bool ls_pcie_is_bridge(struct ls_pcie *pcie)
> @@ -101,20 +101,20 @@ static void ls_pcie_fix_error_response(struct ls_pcie *pcie)
>  	iowrite32(PCIE_ABSERR_SETTING, pci->dbi_base + PCIE_ABSERR);
>  }
>  
> -static u32 ls_pcie_pf_readl(struct ls_pcie *pcie, u32 off)
> +static u32 ls_pcie_pf_lut_readl(struct ls_pcie *pcie, u32 off)
>  {
>  	if (pcie->big_endian)
> -		return ioread32be(pcie->pf_base + off);
> +		return ioread32be(pcie->pf_lut_base + off);
>  
> -	return ioread32(pcie->pf_base + off);
> +	return ioread32(pcie->pf_lut_base + off);
>  }
>  
> -static void ls_pcie_pf_writel(struct ls_pcie *pcie, u32 off, u32 val)
> +static void ls_pcie_pf_lut_writel(struct ls_pcie *pcie, u32 off, u32 val)
>  {
>  	if (pcie->big_endian)
> -		iowrite32be(val, pcie->pf_base + off);
> +		iowrite32be(val, pcie->pf_lut_base + off);
>  	else
> -		iowrite32(val, pcie->pf_base + off);
> +		iowrite32(val, pcie->pf_lut_base + off);
>  }
>  
>  static void ls_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
> @@ -124,11 +124,11 @@ static void ls_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
>  	u32 val;
>  	int ret;
>  
> -	val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR);
> +	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_PF_MCR);
>  	val |= PF_MCR_PTOMR;
> -	ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val);
> +	ls_pcie_pf_lut_writel(pcie, LS_PCIE_PF_MCR, val);
>  
> -	ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR,
> +	ret = readx_poll_timeout(ls_pcie_pf_lut_readl_addr, LS_PCIE_PF_MCR,
>  				 val, !(val & PF_MCR_PTOMR),
>  				 PCIE_PME_TO_L2_TIMEOUT_US/10,
>  				 PCIE_PME_TO_L2_TIMEOUT_US);
> @@ -147,15 +147,15 @@ static int ls_pcie_exit_from_l2(struct dw_pcie_rp *pp)
>  	 * Set PF_MCR_EXL2S bit in LS_PCIE_PF_MCR register for the link
>  	 * to exit L2 state.
>  	 */
> -	val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR);
> +	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_PF_MCR);
>  	val |= PF_MCR_EXL2S;
> -	ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val);
> +	ls_pcie_pf_lut_writel(pcie, LS_PCIE_PF_MCR, val);
>  
>  	/*
>  	 * L2 exit timeout of 10ms is not defined in the specifications,
>  	 * it was chosen based on empirical observations.
>  	 */
> -	ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR,
> +	ret = readx_poll_timeout(ls_pcie_pf_lut_readl_addr, LS_PCIE_PF_MCR,
>  				 val, !(val & PF_MCR_EXL2S),
>  				 1000,
>  				 10000);
> @@ -242,9 +242,9 @@ static const struct ls_pcie_drvdata ls1021a_drvdata = {
>  };
>  
>  static const struct ls_pcie_drvdata layerscape_drvdata = {
> -	.pf_off = 0xc0000,
> +	.pf_lut_off = 0xc0000,
>  	.pm_support = true,
> -	.ops = &ls_pcie_host_ops;
> +	.ops = &ls_pcie_host_ops,

This change should be part of the previous patch.

- Mani

>  	.exit_from_l2 = ls_pcie_exit_from_l2,
>  };
>  
> @@ -293,7 +293,7 @@ static int ls_pcie_probe(struct platform_device *pdev)
>  
>  	pcie->big_endian = of_property_read_bool(dev->of_node, "big-endian");
>  
> -	pcie->pf_base = pci->dbi_base + pcie->drvdata->pf_off;
> +	pcie->pf_lut_base = pci->dbi_base + pcie->drvdata->pf_lut_off;
>  
>  	if (pcie->drvdata->scfg_support) {
>  		pcie->scfg = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,pcie-scfg");
> -- 
> 2.34.1
> 

-- 
மணிவண்ணன் சதாசிவம்

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 3/4] PCI: layerscape(ep): Rename pf_* as pf_lut_*

[Manivannan Sadhasivam]

On Fri, Dec 01, 2023 at 11:17:11AM -0500, Frank Li wrote:
> 'pf' and 'lut' is just difference name in difference chips, but basic it is
> a MMIO base address plus an offset.
> 
> Rename it to avoid duplicate pf_* and lut_* in driver.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>

One comment below. With that addressed,

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

> ---
> 
> Notes:
>     pf_lut is better than pf_* or lut* because some chip use 'pf', some chip
>     use 'lut'.
>     
>     Change from v4 to v5
>     - rename layerscape-ep code also
>     change from v1 to v4
>     - new patch at v3
> 
>  .../pci/controller/dwc/pci-layerscape-ep.c    | 16 ++++-----
>  drivers/pci/controller/dwc/pci-layerscape.c   | 36 +++++++++----------
>  2 files changed, 26 insertions(+), 26 deletions(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-layerscape-ep.c b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> index 3d3c50ef4b6ff..2ca339f938a86 100644
> --- a/drivers/pci/controller/dwc/pci-layerscape-ep.c
> +++ b/drivers/pci/controller/dwc/pci-layerscape-ep.c
> @@ -49,7 +49,7 @@ struct ls_pcie_ep {
>  	bool				big_endian;
>  };
>  
> -static u32 ls_lut_readl(struct ls_pcie_ep *pcie, u32 offset)
> +static u32 ls_pcie_pf_lut_readl(struct ls_pcie_ep *pcie, u32 offset)
>  {
>  	struct dw_pcie *pci = pcie->pci;
>  
> @@ -59,7 +59,7 @@ static u32 ls_lut_readl(struct ls_pcie_ep *pcie, u32 offset)
>  		return ioread32(pci->dbi_base + offset);
>  }
>  
> -static void ls_lut_writel(struct ls_pcie_ep *pcie, u32 offset, u32 value)
> +static void ls_pcie_pf_lut_writel(struct ls_pcie_ep *pcie, u32 offset, u32 value)
>  {
>  	struct dw_pcie *pci = pcie->pci;
>  
> @@ -76,8 +76,8 @@ static irqreturn_t ls_pcie_ep_event_handler(int irq, void *dev_id)
>  	u32 val, cfg;
>  	u8 offset;
>  
> -	val = ls_lut_readl(pcie, PEX_PF0_PME_MES_DR);
> -	ls_lut_writel(pcie, PEX_PF0_PME_MES_DR, val);
> +	val = ls_pcie_pf_lut_readl(pcie, PEX_PF0_PME_MES_DR);
> +	ls_pcie_pf_lut_writel(pcie, PEX_PF0_PME_MES_DR, val);
>  
>  	if (!val)
>  		return IRQ_NONE;
> @@ -96,9 +96,9 @@ static irqreturn_t ls_pcie_ep_event_handler(int irq, void *dev_id)
>  		dw_pcie_writel_dbi(pci, offset + PCI_EXP_LNKCAP, pcie->lnkcap);
>  		dw_pcie_dbi_ro_wr_dis(pci);
>  
> -		cfg = ls_lut_readl(pcie, PEX_PF0_CONFIG);
> +		cfg = ls_pcie_pf_lut_readl(pcie, PEX_PF0_CONFIG);
>  		cfg |= PEX_PF0_CFG_READY;
> -		ls_lut_writel(pcie, PEX_PF0_CONFIG, cfg);
> +		ls_pcie_pf_lut_writel(pcie, PEX_PF0_CONFIG, cfg);
>  		dw_pcie_ep_linkup(&pci->ep);
>  
>  		dev_dbg(pci->dev, "Link up\n");
> @@ -130,10 +130,10 @@ static int ls_pcie_ep_interrupt_init(struct ls_pcie_ep *pcie,
>  	}
>  
>  	/* Enable interrupts */
> -	val = ls_lut_readl(pcie, PEX_PF0_PME_MES_IER);
> +	val = ls_pcie_pf_lut_readl(pcie, PEX_PF0_PME_MES_IER);
>  	val |=  PEX_PF0_PME_MES_IER_LDDIE | PEX_PF0_PME_MES_IER_HRDIE |
>  		PEX_PF0_PME_MES_IER_LUDIE;
> -	ls_lut_writel(pcie, PEX_PF0_PME_MES_IER, val);
> +	ls_pcie_pf_lut_writel(pcie, PEX_PF0_PME_MES_IER, val);
>  
>  	return 0;
>  }
> diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
> index 8bdaae9be7d56..a9151e98fde6f 100644
> --- a/drivers/pci/controller/dwc/pci-layerscape.c
> +++ b/drivers/pci/controller/dwc/pci-layerscape.c
> @@ -44,7 +44,7 @@
>  #define PCIE_IATU_NUM		6
>  
>  struct ls_pcie_drvdata {
> -	const u32 pf_off;
> +	const u32 pf_lut_off;
>  	const struct dw_pcie_host_ops *ops;
>  	int (*exit_from_l2)(struct dw_pcie_rp *pp);
>  	bool scfg_support;
> @@ -54,13 +54,13 @@ struct ls_pcie_drvdata {
>  struct ls_pcie {
>  	struct dw_pcie *pci;
>  	const struct ls_pcie_drvdata *drvdata;
> -	void __iomem *pf_base;
> +	void __iomem *pf_lut_base;
>  	struct regmap *scfg;
>  	int index;
>  	bool big_endian;
>  };
>  
> -#define ls_pcie_pf_readl_addr(addr)	ls_pcie_pf_readl(pcie, addr)
> +#define ls_pcie_pf_lut_readl_addr(addr)	ls_pcie_pf_lut_readl(pcie, addr)
>  #define to_ls_pcie(x)	dev_get_drvdata((x)->dev)
>  
>  static bool ls_pcie_is_bridge(struct ls_pcie *pcie)
> @@ -101,20 +101,20 @@ static void ls_pcie_fix_error_response(struct ls_pcie *pcie)
>  	iowrite32(PCIE_ABSERR_SETTING, pci->dbi_base + PCIE_ABSERR);
>  }
>  
> -static u32 ls_pcie_pf_readl(struct ls_pcie *pcie, u32 off)
> +static u32 ls_pcie_pf_lut_readl(struct ls_pcie *pcie, u32 off)
>  {
>  	if (pcie->big_endian)
> -		return ioread32be(pcie->pf_base + off);
> +		return ioread32be(pcie->pf_lut_base + off);
>  
> -	return ioread32(pcie->pf_base + off);
> +	return ioread32(pcie->pf_lut_base + off);
>  }
>  
> -static void ls_pcie_pf_writel(struct ls_pcie *pcie, u32 off, u32 val)
> +static void ls_pcie_pf_lut_writel(struct ls_pcie *pcie, u32 off, u32 val)
>  {
>  	if (pcie->big_endian)
> -		iowrite32be(val, pcie->pf_base + off);
> +		iowrite32be(val, pcie->pf_lut_base + off);
>  	else
> -		iowrite32(val, pcie->pf_base + off);
> +		iowrite32(val, pcie->pf_lut_base + off);
>  }
>  
>  static void ls_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
> @@ -124,11 +124,11 @@ static void ls_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
>  	u32 val;
>  	int ret;
>  
> -	val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR);
> +	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_PF_MCR);
>  	val |= PF_MCR_PTOMR;
> -	ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val);
> +	ls_pcie_pf_lut_writel(pcie, LS_PCIE_PF_MCR, val);
>  
> -	ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR,
> +	ret = readx_poll_timeout(ls_pcie_pf_lut_readl_addr, LS_PCIE_PF_MCR,
>  				 val, !(val & PF_MCR_PTOMR),
>  				 PCIE_PME_TO_L2_TIMEOUT_US/10,
>  				 PCIE_PME_TO_L2_TIMEOUT_US);
> @@ -147,15 +147,15 @@ static int ls_pcie_exit_from_l2(struct dw_pcie_rp *pp)
>  	 * Set PF_MCR_EXL2S bit in LS_PCIE_PF_MCR register for the link
>  	 * to exit L2 state.
>  	 */
> -	val = ls_pcie_pf_readl(pcie, LS_PCIE_PF_MCR);
> +	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_PF_MCR);
>  	val |= PF_MCR_EXL2S;
> -	ls_pcie_pf_writel(pcie, LS_PCIE_PF_MCR, val);
> +	ls_pcie_pf_lut_writel(pcie, LS_PCIE_PF_MCR, val);
>  
>  	/*
>  	 * L2 exit timeout of 10ms is not defined in the specifications,
>  	 * it was chosen based on empirical observations.
>  	 */
> -	ret = readx_poll_timeout(ls_pcie_pf_readl_addr, LS_PCIE_PF_MCR,
> +	ret = readx_poll_timeout(ls_pcie_pf_lut_readl_addr, LS_PCIE_PF_MCR,
>  				 val, !(val & PF_MCR_EXL2S),
>  				 1000,
>  				 10000);
> @@ -242,9 +242,9 @@ static const struct ls_pcie_drvdata ls1021a_drvdata = {
>  };
>  
>  static const struct ls_pcie_drvdata layerscape_drvdata = {
> -	.pf_off = 0xc0000,
> +	.pf_lut_off = 0xc0000,
>  	.pm_support = true,
> -	.ops = &ls_pcie_host_ops;
> +	.ops = &ls_pcie_host_ops,

This change should be part of the previous patch.

- Mani

>  	.exit_from_l2 = ls_pcie_exit_from_l2,
>  };
>  
> @@ -293,7 +293,7 @@ static int ls_pcie_probe(struct platform_device *pdev)
>  
>  	pcie->big_endian = of_property_read_bool(dev->of_node, "big-endian");
>  
> -	pcie->pf_base = pci->dbi_base + pcie->drvdata->pf_off;
> +	pcie->pf_lut_base = pci->dbi_base + pcie->drvdata->pf_lut_off;
>  
>  	if (pcie->drvdata->scfg_support) {
>  		pcie->scfg = syscon_regmap_lookup_by_phandle(dev->of_node, "fsl,pcie-scfg");
> -- 
> 2.34.1
> 

-- 
மணிவண்ணன் சதாசிவம்

[PATCH v5 4/4] PCI: layerscape: Add suspend/resume for ls1043a

[Frank Li]

Add suspend/resume support for Layerscape LS1043a.

In the suspend path, PME_Turn_Off message is sent to the endpoint to
transition the link to L2/L3_Ready state. In this SoC, there is no way to
check if the controller has received the PME_To_Ack from the endpoint or
not. So to be on the safer side, the driver just waits for
PCIE_PME_TO_L2_TIMEOUT_US before asserting the SoC specific PMXMTTURNOFF
bit to complete the PME_Turn_Off handshake. Then the link would enter L2/L3
state depending on the VAUX supply.

In the resume path, the link is brought back from L2 to L0 by doing a
software reset.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---

Notes:
    Change from v4 to v5
    - update commit message
    - use comments
    /* Reset the PEX wrapper to bring the link out of L2 */
    
    Change from v3 to v4
    - Call scfg_pcie_send_turnoff_msg() shared with ls1021a
    - update commit message
    
    Change from v2 to v3
    - Remove ls_pcie_lut_readl(writel) function
    
    Change from v1 to v2
    - Update subject 'a' to 'A'

 drivers/pci/controller/dwc/pci-layerscape.c | 63 ++++++++++++++++++++-
 1 file changed, 62 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
index a9151e98fde6f..715365e91f8ef 100644
--- a/drivers/pci/controller/dwc/pci-layerscape.c
+++ b/drivers/pci/controller/dwc/pci-layerscape.c
@@ -41,6 +41,15 @@
 #define SCFG_PEXSFTRSTCR	0x190
 #define PEXSR(idx)		BIT(idx)
 
+/* LS1043A PEX PME control register */
+#define SCFG_PEXPMECR		0x144
+#define PEXPME(idx)		BIT(31 - (idx) * 4)
+
+/* LS1043A PEX LUT debug register */
+#define LS_PCIE_LDBG	0x7fc
+#define LDBG_SR		BIT(30)
+#define LDBG_WE		BIT(31)
+
 #define PCIE_IATU_NUM		6
 
 struct ls_pcie_drvdata {
@@ -224,6 +233,45 @@ static int ls1021a_pcie_exit_from_l2(struct dw_pcie_rp *pp)
 	return scfg_pcie_exit_from_l2(pcie->scfg, SCFG_PEXSFTRSTCR, PEXSR(pcie->index));
 }
 
+static void ls1043a_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct ls_pcie *pcie = to_ls_pcie(pci);
+
+	scfg_pcie_send_turnoff_msg(pcie->scfg, SCFG_PEXPMECR, PEXPME(pcie->index));
+}
+
+static int ls1043a_pcie_exit_from_l2(struct dw_pcie_rp *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct ls_pcie *pcie = to_ls_pcie(pci);
+	u32 val;
+
+	/*
+	 * Reset the PEX wrapper to bring the link out of L2.
+	 * LDBG_WE: allows the user to have write access to the PEXDBG[SR] for both setting and
+	 *	    clearing the soft reset on the PEX module.
+	 * LDBG_SR: When SR is set to 1, the PEX module enters soft reset.
+	 */
+	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_LDBG);
+	val |= LDBG_WE;
+	ls_pcie_pf_lut_writel(pcie, LS_PCIE_LDBG, val);
+
+	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_LDBG);
+	val |= LDBG_SR;
+	ls_pcie_pf_lut_writel(pcie, LS_PCIE_LDBG, val);
+
+	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_LDBG);
+	val &= ~LDBG_SR;
+	ls_pcie_pf_lut_writel(pcie, LS_PCIE_LDBG, val);
+
+	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_LDBG);
+	val &= ~LDBG_WE;
+	ls_pcie_pf_lut_writel(pcie, LS_PCIE_LDBG, val);
+
+	return 0;
+}
+
 static const struct dw_pcie_host_ops ls_pcie_host_ops = {
 	.host_init = ls_pcie_host_init,
 	.pme_turn_off = ls_pcie_send_turnoff_msg,
@@ -241,6 +289,19 @@ static const struct ls_pcie_drvdata ls1021a_drvdata = {
 	.exit_from_l2 = ls1021a_pcie_exit_from_l2,
 };
 
+static const struct dw_pcie_host_ops ls1043a_pcie_host_ops = {
+	.host_init = ls_pcie_host_init,
+	.pme_turn_off = ls1043a_pcie_send_turnoff_msg,
+};
+
+static const struct ls_pcie_drvdata ls1043a_drvdata = {
+	.pf_lut_off = 0x10000,
+	.pm_support = true,
+	.scfg_support = true,
+	.ops = &ls1043a_pcie_host_ops,
+	.exit_from_l2 = ls1043a_pcie_exit_from_l2,
+};
+
 static const struct ls_pcie_drvdata layerscape_drvdata = {
 	.pf_lut_off = 0xc0000,
 	.pm_support = true,
@@ -252,7 +313,7 @@ static const struct of_device_id ls_pcie_of_match[] = {
 	{ .compatible = "fsl,ls1012a-pcie", .data = &layerscape_drvdata },
 	{ .compatible = "fsl,ls1021a-pcie", .data = &ls1021a_drvdata },
 	{ .compatible = "fsl,ls1028a-pcie", .data = &layerscape_drvdata },
-	{ .compatible = "fsl,ls1043a-pcie", .data = &ls1021a_drvdata },
+	{ .compatible = "fsl,ls1043a-pcie", .data = &ls1043a_drvdata },
 	{ .compatible = "fsl,ls1046a-pcie", .data = &layerscape_drvdata },
 	{ .compatible = "fsl,ls2080a-pcie", .data = &layerscape_drvdata },
 	{ .compatible = "fsl,ls2085a-pcie", .data = &layerscape_drvdata },
-- 
2.34.1

[PATCH v5 4/4] PCI: layerscape: Add suspend/resume for ls1043a

[Frank Li]

Add suspend/resume support for Layerscape LS1043a.

In the suspend path, PME_Turn_Off message is sent to the endpoint to
transition the link to L2/L3_Ready state. In this SoC, there is no way to
check if the controller has received the PME_To_Ack from the endpoint or
not. So to be on the safer side, the driver just waits for
PCIE_PME_TO_L2_TIMEOUT_US before asserting the SoC specific PMXMTTURNOFF
bit to complete the PME_Turn_Off handshake. Then the link would enter L2/L3
state depending on the VAUX supply.

In the resume path, the link is brought back from L2 to L0 by doing a
software reset.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---

Notes:
    Change from v4 to v5
    - update commit message
    - use comments
    /* Reset the PEX wrapper to bring the link out of L2 */
    
    Change from v3 to v4
    - Call scfg_pcie_send_turnoff_msg() shared with ls1021a
    - update commit message
    
    Change from v2 to v3
    - Remove ls_pcie_lut_readl(writel) function
    
    Change from v1 to v2
    - Update subject 'a' to 'A'

 drivers/pci/controller/dwc/pci-layerscape.c | 63 ++++++++++++++++++++-
 1 file changed, 62 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
index a9151e98fde6f..715365e91f8ef 100644
--- a/drivers/pci/controller/dwc/pci-layerscape.c
+++ b/drivers/pci/controller/dwc/pci-layerscape.c
@@ -41,6 +41,15 @@
 #define SCFG_PEXSFTRSTCR	0x190
 #define PEXSR(idx)		BIT(idx)
 
+/* LS1043A PEX PME control register */
+#define SCFG_PEXPMECR		0x144
+#define PEXPME(idx)		BIT(31 - (idx) * 4)
+
+/* LS1043A PEX LUT debug register */
+#define LS_PCIE_LDBG	0x7fc
+#define LDBG_SR		BIT(30)
+#define LDBG_WE		BIT(31)
+
 #define PCIE_IATU_NUM		6
 
 struct ls_pcie_drvdata {
@@ -224,6 +233,45 @@ static int ls1021a_pcie_exit_from_l2(struct dw_pcie_rp *pp)
 	return scfg_pcie_exit_from_l2(pcie->scfg, SCFG_PEXSFTRSTCR, PEXSR(pcie->index));
 }
 
+static void ls1043a_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct ls_pcie *pcie = to_ls_pcie(pci);
+
+	scfg_pcie_send_turnoff_msg(pcie->scfg, SCFG_PEXPMECR, PEXPME(pcie->index));
+}
+
+static int ls1043a_pcie_exit_from_l2(struct dw_pcie_rp *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct ls_pcie *pcie = to_ls_pcie(pci);
+	u32 val;
+
+	/*
+	 * Reset the PEX wrapper to bring the link out of L2.
+	 * LDBG_WE: allows the user to have write access to the PEXDBG[SR] for both setting and
+	 *	    clearing the soft reset on the PEX module.
+	 * LDBG_SR: When SR is set to 1, the PEX module enters soft reset.
+	 */
+	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_LDBG);
+	val |= LDBG_WE;
+	ls_pcie_pf_lut_writel(pcie, LS_PCIE_LDBG, val);
+
+	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_LDBG);
+	val |= LDBG_SR;
+	ls_pcie_pf_lut_writel(pcie, LS_PCIE_LDBG, val);
+
+	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_LDBG);
+	val &= ~LDBG_SR;
+	ls_pcie_pf_lut_writel(pcie, LS_PCIE_LDBG, val);
+
+	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_LDBG);
+	val &= ~LDBG_WE;
+	ls_pcie_pf_lut_writel(pcie, LS_PCIE_LDBG, val);
+
+	return 0;
+}
+
 static const struct dw_pcie_host_ops ls_pcie_host_ops = {
 	.host_init = ls_pcie_host_init,
 	.pme_turn_off = ls_pcie_send_turnoff_msg,
@@ -241,6 +289,19 @@ static const struct ls_pcie_drvdata ls1021a_drvdata = {
 	.exit_from_l2 = ls1021a_pcie_exit_from_l2,
 };
 
+static const struct dw_pcie_host_ops ls1043a_pcie_host_ops = {
+	.host_init = ls_pcie_host_init,
+	.pme_turn_off = ls1043a_pcie_send_turnoff_msg,
+};
+
+static const struct ls_pcie_drvdata ls1043a_drvdata = {
+	.pf_lut_off = 0x10000,
+	.pm_support = true,
+	.scfg_support = true,
+	.ops = &ls1043a_pcie_host_ops,
+	.exit_from_l2 = ls1043a_pcie_exit_from_l2,
+};
+
 static const struct ls_pcie_drvdata layerscape_drvdata = {
 	.pf_lut_off = 0xc0000,
 	.pm_support = true,
@@ -252,7 +313,7 @@ static const struct of_device_id ls_pcie_of_match[] = {
 	{ .compatible = "fsl,ls1012a-pcie", .data = &layerscape_drvdata },
 	{ .compatible = "fsl,ls1021a-pcie", .data = &ls1021a_drvdata },
 	{ .compatible = "fsl,ls1028a-pcie", .data = &layerscape_drvdata },
-	{ .compatible = "fsl,ls1043a-pcie", .data = &ls1021a_drvdata },
+	{ .compatible = "fsl,ls1043a-pcie", .data = &ls1043a_drvdata },
 	{ .compatible = "fsl,ls1046a-pcie", .data = &layerscape_drvdata },
 	{ .compatible = "fsl,ls2080a-pcie", .data = &layerscape_drvdata },
 	{ .compatible = "fsl,ls2085a-pcie", .data = &layerscape_drvdata },
-- 
2.34.1


_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

[PATCH v5 4/4] PCI: layerscape: Add suspend/resume for ls1043a

[Frank Li]

Add suspend/resume support for Layerscape LS1043a.

In the suspend path, PME_Turn_Off message is sent to the endpoint to
transition the link to L2/L3_Ready state. In this SoC, there is no way to
check if the controller has received the PME_To_Ack from the endpoint or
not. So to be on the safer side, the driver just waits for
PCIE_PME_TO_L2_TIMEOUT_US before asserting the SoC specific PMXMTTURNOFF
bit to complete the PME_Turn_Off handshake. Then the link would enter L2/L3
state depending on the VAUX supply.

In the resume path, the link is brought back from L2 to L0 by doing a
software reset.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---

Notes:
    Change from v4 to v5
    - update commit message
    - use comments
    /* Reset the PEX wrapper to bring the link out of L2 */
    
    Change from v3 to v4
    - Call scfg_pcie_send_turnoff_msg() shared with ls1021a
    - update commit message
    
    Change from v2 to v3
    - Remove ls_pcie_lut_readl(writel) function
    
    Change from v1 to v2
    - Update subject 'a' to 'A'

 drivers/pci/controller/dwc/pci-layerscape.c | 63 ++++++++++++++++++++-
 1 file changed, 62 insertions(+), 1 deletion(-)

diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
index a9151e98fde6f..715365e91f8ef 100644
--- a/drivers/pci/controller/dwc/pci-layerscape.c
+++ b/drivers/pci/controller/dwc/pci-layerscape.c
@@ -41,6 +41,15 @@
 #define SCFG_PEXSFTRSTCR	0x190
 #define PEXSR(idx)		BIT(idx)
 
+/* LS1043A PEX PME control register */
+#define SCFG_PEXPMECR		0x144
+#define PEXPME(idx)		BIT(31 - (idx) * 4)
+
+/* LS1043A PEX LUT debug register */
+#define LS_PCIE_LDBG	0x7fc
+#define LDBG_SR		BIT(30)
+#define LDBG_WE		BIT(31)
+
 #define PCIE_IATU_NUM		6
 
 struct ls_pcie_drvdata {
@@ -224,6 +233,45 @@ static int ls1021a_pcie_exit_from_l2(struct dw_pcie_rp *pp)
 	return scfg_pcie_exit_from_l2(pcie->scfg, SCFG_PEXSFTRSTCR, PEXSR(pcie->index));
 }
 
+static void ls1043a_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct ls_pcie *pcie = to_ls_pcie(pci);
+
+	scfg_pcie_send_turnoff_msg(pcie->scfg, SCFG_PEXPMECR, PEXPME(pcie->index));
+}
+
+static int ls1043a_pcie_exit_from_l2(struct dw_pcie_rp *pp)
+{
+	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
+	struct ls_pcie *pcie = to_ls_pcie(pci);
+	u32 val;
+
+	/*
+	 * Reset the PEX wrapper to bring the link out of L2.
+	 * LDBG_WE: allows the user to have write access to the PEXDBG[SR] for both setting and
+	 *	    clearing the soft reset on the PEX module.
+	 * LDBG_SR: When SR is set to 1, the PEX module enters soft reset.
+	 */
+	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_LDBG);
+	val |= LDBG_WE;
+	ls_pcie_pf_lut_writel(pcie, LS_PCIE_LDBG, val);
+
+	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_LDBG);
+	val |= LDBG_SR;
+	ls_pcie_pf_lut_writel(pcie, LS_PCIE_LDBG, val);
+
+	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_LDBG);
+	val &= ~LDBG_SR;
+	ls_pcie_pf_lut_writel(pcie, LS_PCIE_LDBG, val);
+
+	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_LDBG);
+	val &= ~LDBG_WE;
+	ls_pcie_pf_lut_writel(pcie, LS_PCIE_LDBG, val);
+
+	return 0;
+}
+
 static const struct dw_pcie_host_ops ls_pcie_host_ops = {
 	.host_init = ls_pcie_host_init,
 	.pme_turn_off = ls_pcie_send_turnoff_msg,
@@ -241,6 +289,19 @@ static const struct ls_pcie_drvdata ls1021a_drvdata = {
 	.exit_from_l2 = ls1021a_pcie_exit_from_l2,
 };
 
+static const struct dw_pcie_host_ops ls1043a_pcie_host_ops = {
+	.host_init = ls_pcie_host_init,
+	.pme_turn_off = ls1043a_pcie_send_turnoff_msg,
+};
+
+static const struct ls_pcie_drvdata ls1043a_drvdata = {
+	.pf_lut_off = 0x10000,
+	.pm_support = true,
+	.scfg_support = true,
+	.ops = &ls1043a_pcie_host_ops,
+	.exit_from_l2 = ls1043a_pcie_exit_from_l2,
+};
+
 static const struct ls_pcie_drvdata layerscape_drvdata = {
 	.pf_lut_off = 0xc0000,
 	.pm_support = true,
@@ -252,7 +313,7 @@ static const struct of_device_id ls_pcie_of_match[] = {
 	{ .compatible = "fsl,ls1012a-pcie", .data = &layerscape_drvdata },
 	{ .compatible = "fsl,ls1021a-pcie", .data = &ls1021a_drvdata },
 	{ .compatible = "fsl,ls1028a-pcie", .data = &layerscape_drvdata },
-	{ .compatible = "fsl,ls1043a-pcie", .data = &ls1021a_drvdata },
+	{ .compatible = "fsl,ls1043a-pcie", .data = &ls1043a_drvdata },
 	{ .compatible = "fsl,ls1046a-pcie", .data = &layerscape_drvdata },
 	{ .compatible = "fsl,ls2080a-pcie", .data = &layerscape_drvdata },
 	{ .compatible = "fsl,ls2085a-pcie", .data = &layerscape_drvdata },
-- 
2.34.1

RE: [PATCH v5 4/4] PCI: layerscape: Add suspend/resume for ls1043a

[Roy Zang]

> From: Frank Li <frank.li@nxp.com>
> Subject: [PATCH v5 4/4] PCI: layerscape: Add suspend/resume for ls1043a
> 
> Add suspend/resume support for Layerscape LS1043a.
> 
> In the suspend path, PME_Turn_Off message is sent to the endpoint to
> transition the link to L2/L3_Ready state. In this SoC, there is no way to check if
> the controller has received the PME_To_Ack from the endpoint or not. So to be
> on the safer side, the driver just waits for PCIE_PME_TO_L2_TIMEOUT_US
> before asserting the SoC specific PMXMTTURNOFF bit to complete the
> PME_Turn_Off handshake. Then the link would enter L2/L3 state depending on
> the VAUX supply.
> 
> In the resume path, the link is brought back from L2 to L0 by doing a software
> reset.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by:  Roy Zang <Roy.Zang@nxp.com>
Roy

RE: [PATCH v5 4/4] PCI: layerscape: Add suspend/resume for ls1043a

[Roy Zang]

> From: Frank Li <frank.li@nxp.com>
> Subject: [PATCH v5 4/4] PCI: layerscape: Add suspend/resume for ls1043a
> 
> Add suspend/resume support for Layerscape LS1043a.
> 
> In the suspend path, PME_Turn_Off message is sent to the endpoint to
> transition the link to L2/L3_Ready state. In this SoC, there is no way to check if
> the controller has received the PME_To_Ack from the endpoint or not. So to be
> on the safer side, the driver just waits for PCIE_PME_TO_L2_TIMEOUT_US
> before asserting the SoC specific PMXMTTURNOFF bit to complete the
> PME_Turn_Off handshake. Then the link would enter L2/L3 state depending on
> the VAUX supply.
> 
> In the resume path, the link is brought back from L2 to L0 by doing a software
> reset.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by:  Roy Zang <Roy.Zang@nxp.com>
Roy

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

RE: [PATCH v5 4/4] PCI: layerscape: Add suspend/resume for ls1043a

[Roy Zang]

> From: Frank Li <frank.li@nxp.com>
> Subject: [PATCH v5 4/4] PCI: layerscape: Add suspend/resume for ls1043a
> 
> Add suspend/resume support for Layerscape LS1043a.
> 
> In the suspend path, PME_Turn_Off message is sent to the endpoint to
> transition the link to L2/L3_Ready state. In this SoC, there is no way to check if
> the controller has received the PME_To_Ack from the endpoint or not. So to be
> on the safer side, the driver just waits for PCIE_PME_TO_L2_TIMEOUT_US
> before asserting the SoC specific PMXMTTURNOFF bit to complete the
> PME_Turn_Off handshake. Then the link would enter L2/L3 state depending on
> the VAUX supply.
> 
> In the resume path, the link is brought back from L2 to L0 by doing a software
> reset.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>
Acked-by:  Roy Zang <Roy.Zang@nxp.com>
Roy

Re: [PATCH v5 4/4] PCI: layerscape: Add suspend/resume for ls1043a

[Manivannan Sadhasivam]

On Fri, Dec 01, 2023 at 11:17:12AM -0500, Frank Li wrote:
> Add suspend/resume support for Layerscape LS1043a.
> 
> In the suspend path, PME_Turn_Off message is sent to the endpoint to
> transition the link to L2/L3_Ready state. In this SoC, there is no way to
> check if the controller has received the PME_To_Ack from the endpoint or
> not. So to be on the safer side, the driver just waits for
> PCIE_PME_TO_L2_TIMEOUT_US before asserting the SoC specific PMXMTTURNOFF
> bit to complete the PME_Turn_Off handshake. Then the link would enter L2/L3
> state depending on the VAUX supply.
> 
> In the resume path, the link is brought back from L2 to L0 by doing a
> software reset.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

- Mani

> ---
> 
> Notes:
>     Change from v4 to v5
>     - update commit message
>     - use comments
>     /* Reset the PEX wrapper to bring the link out of L2 */
>     
>     Change from v3 to v4
>     - Call scfg_pcie_send_turnoff_msg() shared with ls1021a
>     - update commit message
>     
>     Change from v2 to v3
>     - Remove ls_pcie_lut_readl(writel) function
>     
>     Change from v1 to v2
>     - Update subject 'a' to 'A'
> 
>  drivers/pci/controller/dwc/pci-layerscape.c | 63 ++++++++++++++++++++-
>  1 file changed, 62 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
> index a9151e98fde6f..715365e91f8ef 100644
> --- a/drivers/pci/controller/dwc/pci-layerscape.c
> +++ b/drivers/pci/controller/dwc/pci-layerscape.c
> @@ -41,6 +41,15 @@
>  #define SCFG_PEXSFTRSTCR	0x190
>  #define PEXSR(idx)		BIT(idx)
>  
> +/* LS1043A PEX PME control register */
> +#define SCFG_PEXPMECR		0x144
> +#define PEXPME(idx)		BIT(31 - (idx) * 4)
> +
> +/* LS1043A PEX LUT debug register */
> +#define LS_PCIE_LDBG	0x7fc
> +#define LDBG_SR		BIT(30)
> +#define LDBG_WE		BIT(31)
> +
>  #define PCIE_IATU_NUM		6
>  
>  struct ls_pcie_drvdata {
> @@ -224,6 +233,45 @@ static int ls1021a_pcie_exit_from_l2(struct dw_pcie_rp *pp)
>  	return scfg_pcie_exit_from_l2(pcie->scfg, SCFG_PEXSFTRSTCR, PEXSR(pcie->index));
>  }
>  
> +static void ls1043a_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
> +{
> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +	struct ls_pcie *pcie = to_ls_pcie(pci);
> +
> +	scfg_pcie_send_turnoff_msg(pcie->scfg, SCFG_PEXPMECR, PEXPME(pcie->index));
> +}
> +
> +static int ls1043a_pcie_exit_from_l2(struct dw_pcie_rp *pp)
> +{
> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +	struct ls_pcie *pcie = to_ls_pcie(pci);
> +	u32 val;
> +
> +	/*
> +	 * Reset the PEX wrapper to bring the link out of L2.
> +	 * LDBG_WE: allows the user to have write access to the PEXDBG[SR] for both setting and
> +	 *	    clearing the soft reset on the PEX module.
> +	 * LDBG_SR: When SR is set to 1, the PEX module enters soft reset.
> +	 */
> +	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_LDBG);
> +	val |= LDBG_WE;
> +	ls_pcie_pf_lut_writel(pcie, LS_PCIE_LDBG, val);
> +
> +	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_LDBG);
> +	val |= LDBG_SR;
> +	ls_pcie_pf_lut_writel(pcie, LS_PCIE_LDBG, val);
> +
> +	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_LDBG);
> +	val &= ~LDBG_SR;
> +	ls_pcie_pf_lut_writel(pcie, LS_PCIE_LDBG, val);
> +
> +	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_LDBG);
> +	val &= ~LDBG_WE;
> +	ls_pcie_pf_lut_writel(pcie, LS_PCIE_LDBG, val);
> +
> +	return 0;
> +}
> +
>  static const struct dw_pcie_host_ops ls_pcie_host_ops = {
>  	.host_init = ls_pcie_host_init,
>  	.pme_turn_off = ls_pcie_send_turnoff_msg,
> @@ -241,6 +289,19 @@ static const struct ls_pcie_drvdata ls1021a_drvdata = {
>  	.exit_from_l2 = ls1021a_pcie_exit_from_l2,
>  };
>  
> +static const struct dw_pcie_host_ops ls1043a_pcie_host_ops = {
> +	.host_init = ls_pcie_host_init,
> +	.pme_turn_off = ls1043a_pcie_send_turnoff_msg,
> +};
> +
> +static const struct ls_pcie_drvdata ls1043a_drvdata = {
> +	.pf_lut_off = 0x10000,
> +	.pm_support = true,
> +	.scfg_support = true,
> +	.ops = &ls1043a_pcie_host_ops,
> +	.exit_from_l2 = ls1043a_pcie_exit_from_l2,
> +};
> +
>  static const struct ls_pcie_drvdata layerscape_drvdata = {
>  	.pf_lut_off = 0xc0000,
>  	.pm_support = true,
> @@ -252,7 +313,7 @@ static const struct of_device_id ls_pcie_of_match[] = {
>  	{ .compatible = "fsl,ls1012a-pcie", .data = &layerscape_drvdata },
>  	{ .compatible = "fsl,ls1021a-pcie", .data = &ls1021a_drvdata },
>  	{ .compatible = "fsl,ls1028a-pcie", .data = &layerscape_drvdata },
> -	{ .compatible = "fsl,ls1043a-pcie", .data = &ls1021a_drvdata },
> +	{ .compatible = "fsl,ls1043a-pcie", .data = &ls1043a_drvdata },
>  	{ .compatible = "fsl,ls1046a-pcie", .data = &layerscape_drvdata },
>  	{ .compatible = "fsl,ls2080a-pcie", .data = &layerscape_drvdata },
>  	{ .compatible = "fsl,ls2085a-pcie", .data = &layerscape_drvdata },
> -- 
> 2.34.1
> 

-- 
மணிவண்ணன் சதாசிவம்

Re: [PATCH v5 4/4] PCI: layerscape: Add suspend/resume for ls1043a

[Manivannan Sadhasivam]

On Fri, Dec 01, 2023 at 11:17:12AM -0500, Frank Li wrote:
> Add suspend/resume support for Layerscape LS1043a.
> 
> In the suspend path, PME_Turn_Off message is sent to the endpoint to
> transition the link to L2/L3_Ready state. In this SoC, there is no way to
> check if the controller has received the PME_To_Ack from the endpoint or
> not. So to be on the safer side, the driver just waits for
> PCIE_PME_TO_L2_TIMEOUT_US before asserting the SoC specific PMXMTTURNOFF
> bit to complete the PME_Turn_Off handshake. Then the link would enter L2/L3
> state depending on the VAUX supply.
> 
> In the resume path, the link is brought back from L2 to L0 by doing a
> software reset.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

- Mani

> ---
> 
> Notes:
>     Change from v4 to v5
>     - update commit message
>     - use comments
>     /* Reset the PEX wrapper to bring the link out of L2 */
>     
>     Change from v3 to v4
>     - Call scfg_pcie_send_turnoff_msg() shared with ls1021a
>     - update commit message
>     
>     Change from v2 to v3
>     - Remove ls_pcie_lut_readl(writel) function
>     
>     Change from v1 to v2
>     - Update subject 'a' to 'A'
> 
>  drivers/pci/controller/dwc/pci-layerscape.c | 63 ++++++++++++++++++++-
>  1 file changed, 62 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
> index a9151e98fde6f..715365e91f8ef 100644
> --- a/drivers/pci/controller/dwc/pci-layerscape.c
> +++ b/drivers/pci/controller/dwc/pci-layerscape.c
> @@ -41,6 +41,15 @@
>  #define SCFG_PEXSFTRSTCR	0x190
>  #define PEXSR(idx)		BIT(idx)
>  
> +/* LS1043A PEX PME control register */
> +#define SCFG_PEXPMECR		0x144
> +#define PEXPME(idx)		BIT(31 - (idx) * 4)
> +
> +/* LS1043A PEX LUT debug register */
> +#define LS_PCIE_LDBG	0x7fc
> +#define LDBG_SR		BIT(30)
> +#define LDBG_WE		BIT(31)
> +
>  #define PCIE_IATU_NUM		6
>  
>  struct ls_pcie_drvdata {
> @@ -224,6 +233,45 @@ static int ls1021a_pcie_exit_from_l2(struct dw_pcie_rp *pp)
>  	return scfg_pcie_exit_from_l2(pcie->scfg, SCFG_PEXSFTRSTCR, PEXSR(pcie->index));
>  }
>  
> +static void ls1043a_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
> +{
> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +	struct ls_pcie *pcie = to_ls_pcie(pci);
> +
> +	scfg_pcie_send_turnoff_msg(pcie->scfg, SCFG_PEXPMECR, PEXPME(pcie->index));
> +}
> +
> +static int ls1043a_pcie_exit_from_l2(struct dw_pcie_rp *pp)
> +{
> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +	struct ls_pcie *pcie = to_ls_pcie(pci);
> +	u32 val;
> +
> +	/*
> +	 * Reset the PEX wrapper to bring the link out of L2.
> +	 * LDBG_WE: allows the user to have write access to the PEXDBG[SR] for both setting and
> +	 *	    clearing the soft reset on the PEX module.
> +	 * LDBG_SR: When SR is set to 1, the PEX module enters soft reset.
> +	 */
> +	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_LDBG);
> +	val |= LDBG_WE;
> +	ls_pcie_pf_lut_writel(pcie, LS_PCIE_LDBG, val);
> +
> +	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_LDBG);
> +	val |= LDBG_SR;
> +	ls_pcie_pf_lut_writel(pcie, LS_PCIE_LDBG, val);
> +
> +	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_LDBG);
> +	val &= ~LDBG_SR;
> +	ls_pcie_pf_lut_writel(pcie, LS_PCIE_LDBG, val);
> +
> +	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_LDBG);
> +	val &= ~LDBG_WE;
> +	ls_pcie_pf_lut_writel(pcie, LS_PCIE_LDBG, val);
> +
> +	return 0;
> +}
> +
>  static const struct dw_pcie_host_ops ls_pcie_host_ops = {
>  	.host_init = ls_pcie_host_init,
>  	.pme_turn_off = ls_pcie_send_turnoff_msg,
> @@ -241,6 +289,19 @@ static const struct ls_pcie_drvdata ls1021a_drvdata = {
>  	.exit_from_l2 = ls1021a_pcie_exit_from_l2,
>  };
>  
> +static const struct dw_pcie_host_ops ls1043a_pcie_host_ops = {
> +	.host_init = ls_pcie_host_init,
> +	.pme_turn_off = ls1043a_pcie_send_turnoff_msg,
> +};
> +
> +static const struct ls_pcie_drvdata ls1043a_drvdata = {
> +	.pf_lut_off = 0x10000,
> +	.pm_support = true,
> +	.scfg_support = true,
> +	.ops = &ls1043a_pcie_host_ops,
> +	.exit_from_l2 = ls1043a_pcie_exit_from_l2,
> +};
> +
>  static const struct ls_pcie_drvdata layerscape_drvdata = {
>  	.pf_lut_off = 0xc0000,
>  	.pm_support = true,
> @@ -252,7 +313,7 @@ static const struct of_device_id ls_pcie_of_match[] = {
>  	{ .compatible = "fsl,ls1012a-pcie", .data = &layerscape_drvdata },
>  	{ .compatible = "fsl,ls1021a-pcie", .data = &ls1021a_drvdata },
>  	{ .compatible = "fsl,ls1028a-pcie", .data = &layerscape_drvdata },
> -	{ .compatible = "fsl,ls1043a-pcie", .data = &ls1021a_drvdata },
> +	{ .compatible = "fsl,ls1043a-pcie", .data = &ls1043a_drvdata },
>  	{ .compatible = "fsl,ls1046a-pcie", .data = &layerscape_drvdata },
>  	{ .compatible = "fsl,ls2080a-pcie", .data = &layerscape_drvdata },
>  	{ .compatible = "fsl,ls2085a-pcie", .data = &layerscape_drvdata },
> -- 
> 2.34.1
> 

-- 
மணிவண்ணன் சதாசிவம்

_______________________________________________
linux-arm-kernel mailing list
linux-arm-kernel@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-arm-kernel

Re: [PATCH v5 4/4] PCI: layerscape: Add suspend/resume for ls1043a

[Manivannan Sadhasivam]

On Fri, Dec 01, 2023 at 11:17:12AM -0500, Frank Li wrote:
> Add suspend/resume support for Layerscape LS1043a.
> 
> In the suspend path, PME_Turn_Off message is sent to the endpoint to
> transition the link to L2/L3_Ready state. In this SoC, there is no way to
> check if the controller has received the PME_To_Ack from the endpoint or
> not. So to be on the safer side, the driver just waits for
> PCIE_PME_TO_L2_TIMEOUT_US before asserting the SoC specific PMXMTTURNOFF
> bit to complete the PME_Turn_Off handshake. Then the link would enter L2/L3
> state depending on the VAUX supply.
> 
> In the resume path, the link is brought back from L2 to L0 by doing a
> software reset.
> 
> Signed-off-by: Frank Li <Frank.Li@nxp.com>

Reviewed-by: Manivannan Sadhasivam <manivannan.sadhasivam@linaro.org>

- Mani

> ---
> 
> Notes:
>     Change from v4 to v5
>     - update commit message
>     - use comments
>     /* Reset the PEX wrapper to bring the link out of L2 */
>     
>     Change from v3 to v4
>     - Call scfg_pcie_send_turnoff_msg() shared with ls1021a
>     - update commit message
>     
>     Change from v2 to v3
>     - Remove ls_pcie_lut_readl(writel) function
>     
>     Change from v1 to v2
>     - Update subject 'a' to 'A'
> 
>  drivers/pci/controller/dwc/pci-layerscape.c | 63 ++++++++++++++++++++-
>  1 file changed, 62 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/pci/controller/dwc/pci-layerscape.c b/drivers/pci/controller/dwc/pci-layerscape.c
> index a9151e98fde6f..715365e91f8ef 100644
> --- a/drivers/pci/controller/dwc/pci-layerscape.c
> +++ b/drivers/pci/controller/dwc/pci-layerscape.c
> @@ -41,6 +41,15 @@
>  #define SCFG_PEXSFTRSTCR	0x190
>  #define PEXSR(idx)		BIT(idx)
>  
> +/* LS1043A PEX PME control register */
> +#define SCFG_PEXPMECR		0x144
> +#define PEXPME(idx)		BIT(31 - (idx) * 4)
> +
> +/* LS1043A PEX LUT debug register */
> +#define LS_PCIE_LDBG	0x7fc
> +#define LDBG_SR		BIT(30)
> +#define LDBG_WE		BIT(31)
> +
>  #define PCIE_IATU_NUM		6
>  
>  struct ls_pcie_drvdata {
> @@ -224,6 +233,45 @@ static int ls1021a_pcie_exit_from_l2(struct dw_pcie_rp *pp)
>  	return scfg_pcie_exit_from_l2(pcie->scfg, SCFG_PEXSFTRSTCR, PEXSR(pcie->index));
>  }
>  
> +static void ls1043a_pcie_send_turnoff_msg(struct dw_pcie_rp *pp)
> +{
> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +	struct ls_pcie *pcie = to_ls_pcie(pci);
> +
> +	scfg_pcie_send_turnoff_msg(pcie->scfg, SCFG_PEXPMECR, PEXPME(pcie->index));
> +}
> +
> +static int ls1043a_pcie_exit_from_l2(struct dw_pcie_rp *pp)
> +{
> +	struct dw_pcie *pci = to_dw_pcie_from_pp(pp);
> +	struct ls_pcie *pcie = to_ls_pcie(pci);
> +	u32 val;
> +
> +	/*
> +	 * Reset the PEX wrapper to bring the link out of L2.
> +	 * LDBG_WE: allows the user to have write access to the PEXDBG[SR] for both setting and
> +	 *	    clearing the soft reset on the PEX module.
> +	 * LDBG_SR: When SR is set to 1, the PEX module enters soft reset.
> +	 */
> +	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_LDBG);
> +	val |= LDBG_WE;
> +	ls_pcie_pf_lut_writel(pcie, LS_PCIE_LDBG, val);
> +
> +	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_LDBG);
> +	val |= LDBG_SR;
> +	ls_pcie_pf_lut_writel(pcie, LS_PCIE_LDBG, val);
> +
> +	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_LDBG);
> +	val &= ~LDBG_SR;
> +	ls_pcie_pf_lut_writel(pcie, LS_PCIE_LDBG, val);
> +
> +	val = ls_pcie_pf_lut_readl(pcie, LS_PCIE_LDBG);
> +	val &= ~LDBG_WE;
> +	ls_pcie_pf_lut_writel(pcie, LS_PCIE_LDBG, val);
> +
> +	return 0;
> +}
> +
>  static const struct dw_pcie_host_ops ls_pcie_host_ops = {
>  	.host_init = ls_pcie_host_init,
>  	.pme_turn_off = ls_pcie_send_turnoff_msg,
> @@ -241,6 +289,19 @@ static const struct ls_pcie_drvdata ls1021a_drvdata = {
>  	.exit_from_l2 = ls1021a_pcie_exit_from_l2,
>  };
>  
> +static const struct dw_pcie_host_ops ls1043a_pcie_host_ops = {
> +	.host_init = ls_pcie_host_init,
> +	.pme_turn_off = ls1043a_pcie_send_turnoff_msg,
> +};
> +
> +static const struct ls_pcie_drvdata ls1043a_drvdata = {
> +	.pf_lut_off = 0x10000,
> +	.pm_support = true,
> +	.scfg_support = true,
> +	.ops = &ls1043a_pcie_host_ops,
> +	.exit_from_l2 = ls1043a_pcie_exit_from_l2,
> +};
> +
>  static const struct ls_pcie_drvdata layerscape_drvdata = {
>  	.pf_lut_off = 0xc0000,
>  	.pm_support = true,
> @@ -252,7 +313,7 @@ static const struct of_device_id ls_pcie_of_match[] = {
>  	{ .compatible = "fsl,ls1012a-pcie", .data = &layerscape_drvdata },
>  	{ .compatible = "fsl,ls1021a-pcie", .data = &ls1021a_drvdata },
>  	{ .compatible = "fsl,ls1028a-pcie", .data = &layerscape_drvdata },
> -	{ .compatible = "fsl,ls1043a-pcie", .data = &ls1021a_drvdata },
> +	{ .compatible = "fsl,ls1043a-pcie", .data = &ls1043a_drvdata },
>  	{ .compatible = "fsl,ls1046a-pcie", .data = &layerscape_drvdata },
>  	{ .compatible = "fsl,ls2080a-pcie", .data = &layerscape_drvdata },
>  	{ .compatible = "fsl,ls2085a-pcie", .data = &layerscape_drvdata },
> -- 
> 2.34.1
> 

-- 
மணிவண்ணன் சதாசிவம்