All of lore.kernel.org
 help / color / mirror / Atom feed
From: George Stark <gnstark@salutedevices.com>
To: <andy.shevchenko@gmail.com>, <pavel@ucw.cz>, <lee@kernel.org>,
	<vadimp@nvidia.com>, <mpe@ellerman.id.au>, <npiggin@gmail.com>,
	<christophe.leroy@csgroup.eu>, <hdegoede@redhat.com>,
	<mazziesaccount@gmail.com>, <peterz@infradead.org>,
	<mingo@redhat.com>, <will@kernel.org>, <longman@redhat.com>,
	<boqun.feng@gmail.com>, <nikitos.tr@gmail.com>,
	<kabel@kernel.org>
Cc: <linux-leds@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linuxppc-dev@lists.ozlabs.org>, <kernel@salutedevices.com>,
	George Stark <gnstark@salutedevices.com>,
	Nikita Travkin <nikita@trvn.ru>
Subject: [PATCH v5 03/10] leds: aw2013: use devm API to cleanup module's resources
Date: Thu, 7 Mar 2024 05:40:27 +0300	[thread overview]
Message-ID: <20240307024034.1548605-4-gnstark@salutedevices.com> (raw)
In-Reply-To: <20240307024034.1548605-1-gnstark@salutedevices.com>

In this driver LEDs are registered using devm_led_classdev_register()
so they are automatically unregistered after module's remove() is done.
led_classdev_unregister() calls module's led_set_brightness() to turn off
the LEDs and that callback uses resources which were destroyed already
in module's remove() so use devm API instead of remove().

Signed-off-by: George Stark <gnstark@salutedevices.com>
Tested-by: Nikita Travkin <nikita@trvn.ru>
---
 drivers/leds/leds-aw2013.c | 25 +++++++++++++------------
 1 file changed, 13 insertions(+), 12 deletions(-)

diff --git a/drivers/leds/leds-aw2013.c b/drivers/leds/leds-aw2013.c
index 17235a5e576a..6475eadcb0df 100644
--- a/drivers/leds/leds-aw2013.c
+++ b/drivers/leds/leds-aw2013.c
@@ -320,6 +320,11 @@ static int aw2013_probe_dt(struct aw2013 *chip)
 	return 0;
 }
 
+static void aw2013_chip_disable_action(void *data)
+{
+	aw2013_chip_disable(data);
+}
+
 static const struct regmap_config aw2013_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
@@ -336,7 +341,10 @@ static int aw2013_probe(struct i2c_client *client)
 	if (!chip)
 		return -ENOMEM;
 
-	mutex_init(&chip->mutex);
+	ret = devm_mutex_init(&client->dev, &chip->mutex);
+	if (ret)
+		return ret;
+
 	mutex_lock(&chip->mutex);
 
 	chip->client = client;
@@ -384,6 +392,10 @@ static int aw2013_probe(struct i2c_client *client)
 		goto error_reg;
 	}
 
+	ret = devm_add_action(&client->dev, aw2013_chip_disable_action, chip);
+	if (ret)
+		goto error_reg;
+
 	ret = aw2013_probe_dt(chip);
 	if (ret < 0)
 		goto error_reg;
@@ -406,19 +418,9 @@ static int aw2013_probe(struct i2c_client *client)
 
 error:
 	mutex_unlock(&chip->mutex);
-	mutex_destroy(&chip->mutex);
 	return ret;
 }
 
-static void aw2013_remove(struct i2c_client *client)
-{
-	struct aw2013 *chip = i2c_get_clientdata(client);
-
-	aw2013_chip_disable(chip);
-
-	mutex_destroy(&chip->mutex);
-}
-
 static const struct of_device_id aw2013_match_table[] = {
 	{ .compatible = "awinic,aw2013", },
 	{ /* sentinel */ },
@@ -432,7 +434,6 @@ static struct i2c_driver aw2013_driver = {
 		.of_match_table = aw2013_match_table,
 	},
 	.probe = aw2013_probe,
-	.remove = aw2013_remove,
 };
 
 module_i2c_driver(aw2013_driver);
-- 
2.25.1


WARNING: multiple messages have this Message-ID (diff)
From: George Stark <gnstark@salutedevices.com>
To: <andy.shevchenko@gmail.com>, <pavel@ucw.cz>, <lee@kernel.org>,
	<vadimp@nvidia.com>, <mpe@ellerman.id.au>, <npiggin@gmail.com>,
	<christophe.leroy@csgroup.eu>, <hdegoede@redhat.com>,
	<mazziesaccount@gmail.com>, <peterz@infradead.org>,
	<mingo@redhat.com>, <will@kernel.org>, <longman@redhat.com>,
	<boqun.feng@gmail.com>, <nikitos.tr@gmail.com>,
	<kabel@kernel.org>
Cc: kernel@salutedevices.com, linux-kernel@vger.kernel.org,
	George Stark <gnstark@salutedevices.com>,
	Nikita Travkin <nikita@trvn.ru>,
	linuxppc-dev@lists.ozlabs.org, linux-leds@vger.kernel.org
Subject: [PATCH v5 03/10] leds: aw2013: use devm API to cleanup module's resources
Date: Thu, 7 Mar 2024 05:40:27 +0300	[thread overview]
Message-ID: <20240307024034.1548605-4-gnstark@salutedevices.com> (raw)
In-Reply-To: <20240307024034.1548605-1-gnstark@salutedevices.com>

In this driver LEDs are registered using devm_led_classdev_register()
so they are automatically unregistered after module's remove() is done.
led_classdev_unregister() calls module's led_set_brightness() to turn off
the LEDs and that callback uses resources which were destroyed already
in module's remove() so use devm API instead of remove().

Signed-off-by: George Stark <gnstark@salutedevices.com>
Tested-by: Nikita Travkin <nikita@trvn.ru>
---
 drivers/leds/leds-aw2013.c | 25 +++++++++++++------------
 1 file changed, 13 insertions(+), 12 deletions(-)

diff --git a/drivers/leds/leds-aw2013.c b/drivers/leds/leds-aw2013.c
index 17235a5e576a..6475eadcb0df 100644
--- a/drivers/leds/leds-aw2013.c
+++ b/drivers/leds/leds-aw2013.c
@@ -320,6 +320,11 @@ static int aw2013_probe_dt(struct aw2013 *chip)
 	return 0;
 }
 
+static void aw2013_chip_disable_action(void *data)
+{
+	aw2013_chip_disable(data);
+}
+
 static const struct regmap_config aw2013_regmap_config = {
 	.reg_bits = 8,
 	.val_bits = 8,
@@ -336,7 +341,10 @@ static int aw2013_probe(struct i2c_client *client)
 	if (!chip)
 		return -ENOMEM;
 
-	mutex_init(&chip->mutex);
+	ret = devm_mutex_init(&client->dev, &chip->mutex);
+	if (ret)
+		return ret;
+
 	mutex_lock(&chip->mutex);
 
 	chip->client = client;
@@ -384,6 +392,10 @@ static int aw2013_probe(struct i2c_client *client)
 		goto error_reg;
 	}
 
+	ret = devm_add_action(&client->dev, aw2013_chip_disable_action, chip);
+	if (ret)
+		goto error_reg;
+
 	ret = aw2013_probe_dt(chip);
 	if (ret < 0)
 		goto error_reg;
@@ -406,19 +418,9 @@ static int aw2013_probe(struct i2c_client *client)
 
 error:
 	mutex_unlock(&chip->mutex);
-	mutex_destroy(&chip->mutex);
 	return ret;
 }
 
-static void aw2013_remove(struct i2c_client *client)
-{
-	struct aw2013 *chip = i2c_get_clientdata(client);
-
-	aw2013_chip_disable(chip);
-
-	mutex_destroy(&chip->mutex);
-}
-
 static const struct of_device_id aw2013_match_table[] = {
 	{ .compatible = "awinic,aw2013", },
 	{ /* sentinel */ },
@@ -432,7 +434,6 @@ static struct i2c_driver aw2013_driver = {
 		.of_match_table = aw2013_match_table,
 	},
 	.probe = aw2013_probe,
-	.remove = aw2013_remove,
 };
 
 module_i2c_driver(aw2013_driver);
-- 
2.25.1


  parent reply	other threads:[~2024-03-07  2:40 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-03-07  2:40 [PATCH v5 00/10] devm_led_classdev_register() usage problem George Stark
2024-03-07  2:40 ` George Stark
2024-03-07  2:40 ` [PATCH v5 01/10] locking/mutex: move mutex_destroy() definition lower George Stark
2024-03-07  2:40   ` George Stark
2024-03-07  2:40 ` [PATCH v5 02/10] locking/mutex: introduce devm_mutex_init George Stark
2024-03-07  2:40   ` George Stark
2024-03-07  9:56   ` Marek Behún
2024-03-07  9:56     ` Marek Behún
2024-03-07 13:39     ` Waiman Long
2024-03-07 13:39       ` Waiman Long
2024-03-07 16:44       ` Marek Behún
2024-03-07 16:44         ` Marek Behún
2024-03-11 23:47         ` George Stark
2024-03-11 23:47           ` George Stark
2024-03-12  1:10           ` Waiman Long
2024-03-12  1:10             ` Waiman Long
2024-03-12  5:44             ` Christophe Leroy
2024-03-12  5:44               ` Christophe Leroy
2024-03-12  6:04           ` Christophe Leroy
2024-03-12  6:04             ` Christophe Leroy
2024-03-12 11:39             ` George Stark
2024-03-12 11:39               ` George Stark
2024-03-12 11:51               ` Christophe Leroy
2024-03-12 11:51                 ` Christophe Leroy
2024-03-12 15:30                 ` George Stark
2024-03-12 15:30                   ` George Stark
2024-03-12 18:17                   ` Christophe Leroy
2024-03-12 18:17                     ` Christophe Leroy
2024-03-07 10:34   ` Andy Shevchenko
2024-03-07 10:34     ` Andy Shevchenko
2024-03-12  0:01     ` George Stark
2024-03-12  0:01       ` George Stark
2024-03-12  5:41       ` Christophe Leroy
2024-03-12  5:41         ` Christophe Leroy
2024-03-12  8:58         ` Andy Shevchenko
2024-03-12  8:58           ` Andy Shevchenko
2024-03-07 13:50   ` Christophe Leroy
2024-03-07 13:50     ` Christophe Leroy
2024-03-11 23:31     ` George Stark
2024-03-11 23:31       ` George Stark
2024-03-07  2:40 ` George Stark [this message]
2024-03-07  2:40   ` [PATCH v5 03/10] leds: aw2013: use devm API to cleanup module's resources George Stark
2024-03-07  2:40 ` [PATCH v5 04/10] leds: aw200xx: " George Stark
2024-03-07  2:40   ` George Stark
2024-03-07  2:40 ` [PATCH v5 05/10] leds: lp3952: " George Stark
2024-03-07  2:40   ` George Stark
2024-03-07  2:40 ` [PATCH v5 06/10] leds: lm3532: " George Stark
2024-03-07  2:40   ` George Stark
2024-03-07  2:40 ` [PATCH v5 07/10] leds: nic78bx: " George Stark
2024-03-07  2:40   ` George Stark
2024-03-07  2:40 ` [PATCH v5 08/10] leds: mlxreg: use devm_mutex_init for mutex initializtion George Stark
2024-03-07  2:40   ` George Stark
2024-03-07  2:40 ` [PATCH v5 09/10] leds: an30259a: use devm_mutext_init for mutext initialization George Stark
2024-03-07  2:40   ` George Stark
2024-03-07  2:40 ` [PATCH v5 10/10] leds: powernv: use LED_RETAIN_AT_SHUTDOWN flag for leds George Stark
2024-03-07  2:40   ` George Stark

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240307024034.1548605-4-gnstark@salutedevices.com \
    --to=gnstark@salutedevices.com \
    --cc=andy.shevchenko@gmail.com \
    --cc=boqun.feng@gmail.com \
    --cc=christophe.leroy@csgroup.eu \
    --cc=hdegoede@redhat.com \
    --cc=kabel@kernel.org \
    --cc=kernel@salutedevices.com \
    --cc=lee@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=longman@redhat.com \
    --cc=mazziesaccount@gmail.com \
    --cc=mingo@redhat.com \
    --cc=mpe@ellerman.id.au \
    --cc=nikita@trvn.ru \
    --cc=nikitos.tr@gmail.com \
    --cc=npiggin@gmail.com \
    --cc=pavel@ucw.cz \
    --cc=peterz@infradead.org \
    --cc=vadimp@nvidia.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.