All of lore.kernel.org
 help / color / mirror / Atom feed
From: George Stark <gnstark@salutedevices.com>
To: <andy.shevchenko@gmail.com>, <pavel@ucw.cz>, <lee@kernel.org>,
	<vadimp@nvidia.com>, <mpe@ellerman.id.au>, <npiggin@gmail.com>,
	<christophe.leroy@csgroup.eu>, <hdegoede@redhat.com>,
	<mazziesaccount@gmail.com>, <peterz@infradead.org>,
	<mingo@redhat.com>, <will@kernel.org>, <longman@redhat.com>,
	<boqun.feng@gmail.com>, <nikitos.tr@gmail.com>,
	<kabel@kernel.org>
Cc: <linux-leds@vger.kernel.org>, <linux-kernel@vger.kernel.org>,
	<linuxppc-dev@lists.ozlabs.org>, <kernel@salutedevices.com>,
	George Stark <gnstark@salutedevices.com>
Subject: [PATCH v5 05/10] leds: lp3952: use devm API to cleanup module's resources
Date: Thu, 7 Mar 2024 05:40:29 +0300	[thread overview]
Message-ID: <20240307024034.1548605-6-gnstark@salutedevices.com> (raw)
In-Reply-To: <20240307024034.1548605-1-gnstark@salutedevices.com>

In this driver LEDs are registered using devm_led_classdev_register()
so they are automatically unregistered after module's remove() is done.
led_classdev_unregister() calls module's led_set_brightness() to turn off
the LEDs and that callback uses resources which were destroyed already
in module's remove() so use devm API instead of remove().
Also drop explicit turning LEDs off from remove() due to they will be off
anyway by led_classdev_unregister().

Signed-off-by: George Stark <gnstark@salutedevices.com>
---
 drivers/leds/leds-lp3952.c | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)

diff --git a/drivers/leds/leds-lp3952.c b/drivers/leds/leds-lp3952.c
index 5d18bbfd1f23..e24bfe686312 100644
--- a/drivers/leds/leds-lp3952.c
+++ b/drivers/leds/leds-lp3952.c
@@ -207,6 +207,13 @@ static const struct regmap_config lp3952_regmap = {
 	.cache_type = REGCACHE_MAPLE,
 };
 
+static void gpio_set_low_action(void *data)
+{
+	struct lp3952_led_array *priv = (struct lp3952_led_array *)data;
+
+	gpiod_set_value(priv->enable_gpio, 0);
+}
+
 static int lp3952_probe(struct i2c_client *client)
 {
 	int status;
@@ -226,6 +233,10 @@ static int lp3952_probe(struct i2c_client *client)
 		return status;
 	}
 
+	status = devm_add_action(&client->dev, gpio_set_low_action, priv);
+	if (status)
+		return status;
+
 	priv->regmap = devm_regmap_init_i2c(client, &lp3952_regmap);
 	if (IS_ERR(priv->regmap)) {
 		int err = PTR_ERR(priv->regmap);
@@ -254,15 +265,6 @@ static int lp3952_probe(struct i2c_client *client)
 	return 0;
 }
 
-static void lp3952_remove(struct i2c_client *client)
-{
-	struct lp3952_led_array *priv;
-
-	priv = i2c_get_clientdata(client);
-	lp3952_on_off(priv, LP3952_LED_ALL, false);
-	gpiod_set_value(priv->enable_gpio, 0);
-}
-
 static const struct i2c_device_id lp3952_id[] = {
 	{LP3952_NAME, 0},
 	{}
@@ -274,7 +276,6 @@ static struct i2c_driver lp3952_i2c_driver = {
 			.name = LP3952_NAME,
 	},
 	.probe = lp3952_probe,
-	.remove = lp3952_remove,
 	.id_table = lp3952_id,
 };
 
-- 
2.25.1


WARNING: multiple messages have this Message-ID (diff)
From: George Stark <gnstark@salutedevices.com>
To: <andy.shevchenko@gmail.com>, <pavel@ucw.cz>, <lee@kernel.org>,
	<vadimp@nvidia.com>, <mpe@ellerman.id.au>, <npiggin@gmail.com>,
	<christophe.leroy@csgroup.eu>, <hdegoede@redhat.com>,
	<mazziesaccount@gmail.com>, <peterz@infradead.org>,
	<mingo@redhat.com>, <will@kernel.org>, <longman@redhat.com>,
	<boqun.feng@gmail.com>, <nikitos.tr@gmail.com>,
	<kabel@kernel.org>
Cc: kernel@salutedevices.com, linuxppc-dev@lists.ozlabs.org,
	linux-kernel@vger.kernel.org, linux-leds@vger.kernel.org,
	George Stark <gnstark@salutedevices.com>
Subject: [PATCH v5 05/10] leds: lp3952: use devm API to cleanup module's resources
Date: Thu, 7 Mar 2024 05:40:29 +0300	[thread overview]
Message-ID: <20240307024034.1548605-6-gnstark@salutedevices.com> (raw)
In-Reply-To: <20240307024034.1548605-1-gnstark@salutedevices.com>

In this driver LEDs are registered using devm_led_classdev_register()
so they are automatically unregistered after module's remove() is done.
led_classdev_unregister() calls module's led_set_brightness() to turn off
the LEDs and that callback uses resources which were destroyed already
in module's remove() so use devm API instead of remove().
Also drop explicit turning LEDs off from remove() due to they will be off
anyway by led_classdev_unregister().

Signed-off-by: George Stark <gnstark@salutedevices.com>
---
 drivers/leds/leds-lp3952.c | 21 +++++++++++----------
 1 file changed, 11 insertions(+), 10 deletions(-)

diff --git a/drivers/leds/leds-lp3952.c b/drivers/leds/leds-lp3952.c
index 5d18bbfd1f23..e24bfe686312 100644
--- a/drivers/leds/leds-lp3952.c
+++ b/drivers/leds/leds-lp3952.c
@@ -207,6 +207,13 @@ static const struct regmap_config lp3952_regmap = {
 	.cache_type = REGCACHE_MAPLE,
 };
 
+static void gpio_set_low_action(void *data)
+{
+	struct lp3952_led_array *priv = (struct lp3952_led_array *)data;
+
+	gpiod_set_value(priv->enable_gpio, 0);
+}
+
 static int lp3952_probe(struct i2c_client *client)
 {
 	int status;
@@ -226,6 +233,10 @@ static int lp3952_probe(struct i2c_client *client)
 		return status;
 	}
 
+	status = devm_add_action(&client->dev, gpio_set_low_action, priv);
+	if (status)
+		return status;
+
 	priv->regmap = devm_regmap_init_i2c(client, &lp3952_regmap);
 	if (IS_ERR(priv->regmap)) {
 		int err = PTR_ERR(priv->regmap);
@@ -254,15 +265,6 @@ static int lp3952_probe(struct i2c_client *client)
 	return 0;
 }
 
-static void lp3952_remove(struct i2c_client *client)
-{
-	struct lp3952_led_array *priv;
-
-	priv = i2c_get_clientdata(client);
-	lp3952_on_off(priv, LP3952_LED_ALL, false);
-	gpiod_set_value(priv->enable_gpio, 0);
-}
-
 static const struct i2c_device_id lp3952_id[] = {
 	{LP3952_NAME, 0},
 	{}
@@ -274,7 +276,6 @@ static struct i2c_driver lp3952_i2c_driver = {
 			.name = LP3952_NAME,
 	},
 	.probe = lp3952_probe,
-	.remove = lp3952_remove,
 	.id_table = lp3952_id,
 };
 
-- 
2.25.1


  parent reply	other threads:[~2024-03-07  2:40 UTC|newest]

Thread overview: 56+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-03-07  2:40 [PATCH v5 00/10] devm_led_classdev_register() usage problem George Stark
2024-03-07  2:40 ` George Stark
2024-03-07  2:40 ` [PATCH v5 01/10] locking/mutex: move mutex_destroy() definition lower George Stark
2024-03-07  2:40   ` George Stark
2024-03-07  2:40 ` [PATCH v5 02/10] locking/mutex: introduce devm_mutex_init George Stark
2024-03-07  2:40   ` George Stark
2024-03-07  9:56   ` Marek Behún
2024-03-07  9:56     ` Marek Behún
2024-03-07 13:39     ` Waiman Long
2024-03-07 13:39       ` Waiman Long
2024-03-07 16:44       ` Marek Behún
2024-03-07 16:44         ` Marek Behún
2024-03-11 23:47         ` George Stark
2024-03-11 23:47           ` George Stark
2024-03-12  1:10           ` Waiman Long
2024-03-12  1:10             ` Waiman Long
2024-03-12  5:44             ` Christophe Leroy
2024-03-12  5:44               ` Christophe Leroy
2024-03-12  6:04           ` Christophe Leroy
2024-03-12  6:04             ` Christophe Leroy
2024-03-12 11:39             ` George Stark
2024-03-12 11:39               ` George Stark
2024-03-12 11:51               ` Christophe Leroy
2024-03-12 11:51                 ` Christophe Leroy
2024-03-12 15:30                 ` George Stark
2024-03-12 15:30                   ` George Stark
2024-03-12 18:17                   ` Christophe Leroy
2024-03-12 18:17                     ` Christophe Leroy
2024-03-07 10:34   ` Andy Shevchenko
2024-03-07 10:34     ` Andy Shevchenko
2024-03-12  0:01     ` George Stark
2024-03-12  0:01       ` George Stark
2024-03-12  5:41       ` Christophe Leroy
2024-03-12  5:41         ` Christophe Leroy
2024-03-12  8:58         ` Andy Shevchenko
2024-03-12  8:58           ` Andy Shevchenko
2024-03-07 13:50   ` Christophe Leroy
2024-03-07 13:50     ` Christophe Leroy
2024-03-11 23:31     ` George Stark
2024-03-11 23:31       ` George Stark
2024-03-07  2:40 ` [PATCH v5 03/10] leds: aw2013: use devm API to cleanup module's resources George Stark
2024-03-07  2:40   ` George Stark
2024-03-07  2:40 ` [PATCH v5 04/10] leds: aw200xx: " George Stark
2024-03-07  2:40   ` George Stark
2024-03-07  2:40 ` George Stark [this message]
2024-03-07  2:40   ` [PATCH v5 05/10] leds: lp3952: " George Stark
2024-03-07  2:40 ` [PATCH v5 06/10] leds: lm3532: " George Stark
2024-03-07  2:40   ` George Stark
2024-03-07  2:40 ` [PATCH v5 07/10] leds: nic78bx: " George Stark
2024-03-07  2:40   ` George Stark
2024-03-07  2:40 ` [PATCH v5 08/10] leds: mlxreg: use devm_mutex_init for mutex initializtion George Stark
2024-03-07  2:40   ` George Stark
2024-03-07  2:40 ` [PATCH v5 09/10] leds: an30259a: use devm_mutext_init for mutext initialization George Stark
2024-03-07  2:40   ` George Stark
2024-03-07  2:40 ` [PATCH v5 10/10] leds: powernv: use LED_RETAIN_AT_SHUTDOWN flag for leds George Stark
2024-03-07  2:40   ` George Stark

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20240307024034.1548605-6-gnstark@salutedevices.com \
    --to=gnstark@salutedevices.com \
    --cc=andy.shevchenko@gmail.com \
    --cc=boqun.feng@gmail.com \
    --cc=christophe.leroy@csgroup.eu \
    --cc=hdegoede@redhat.com \
    --cc=kabel@kernel.org \
    --cc=kernel@salutedevices.com \
    --cc=lee@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-leds@vger.kernel.org \
    --cc=linuxppc-dev@lists.ozlabs.org \
    --cc=longman@redhat.com \
    --cc=mazziesaccount@gmail.com \
    --cc=mingo@redhat.com \
    --cc=mpe@ellerman.id.au \
    --cc=nikitos.tr@gmail.com \
    --cc=npiggin@gmail.com \
    --cc=pavel@ucw.cz \
    --cc=peterz@infradead.org \
    --cc=vadimp@nvidia.com \
    --cc=will@kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.