From: Jamin Lin via <qemu-arm@nongnu.org>
To: "Cédric Le Goater" <clg@kaod.org>,
"Peter Maydell" <peter.maydell@linaro.org>,
"Andrew Jeffery" <andrew@codeconstruct.com.au>,
"Joel Stanley" <joel@jms.id.au>,
"Alistair Francis" <alistair@alistair23.me>,
"Cleber Rosa" <crosa@redhat.com>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Wainer dos Santos Moschetta" <wainersm@redhat.com>,
"Beraldo Leal" <bleal@redhat.com>,
"open list:ASPEED BMCs" <qemu-arm@nongnu.org>,
"open list:All patches CC here" <qemu-devel@nongnu.org>
Cc: <jamin_lin@aspeedtech.com>, <troy_lee@aspeedtech.com>,
<yunlin.tang@aspeedtech.com>
Subject: [PATCH v5 10/17] aspeed/smc: Add AST2700 support
Date: Tue, 4 Jun 2024 13:44:31 +0800 [thread overview]
Message-ID: <20240604054438.3424349-11-jamin_lin@aspeedtech.com> (raw)
In-Reply-To: <20240604054438.3424349-1-jamin_lin@aspeedtech.com>
AST2700 fmc/spi controller's address decoding unit is 64KB
and only bits [31:16] are used for decoding. Introduce seg_to_reg
and reg_to_seg handlers for ast2700 fmc/spi controller.
In addition, adds ast2700 fmc, spi0, spi1, and spi2 class init handler.
AST2700 is a 64 bits quad core CPUs(Cortex-a35). Introduce a new
"aspeed_2700_smc_flash_ops" and set its valid "max_access_size"
8 for 64 bits data format access.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
hw/ssi/aspeed_smc.c | 234 +++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 233 insertions(+), 1 deletion(-)
diff --git a/hw/ssi/aspeed_smc.c b/hw/ssi/aspeed_smc.c
index 129d06690d..49205ab76d 100644
--- a/hw/ssi/aspeed_smc.c
+++ b/hw/ssi/aspeed_smc.c
@@ -185,7 +185,7 @@
* 0: 4 bytes
* 0x1FFFFFC: 32M bytes
*
- * DMA length is from 1 byte to 32MB (AST2600, AST10x0)
+ * DMA length is from 1 byte to 32MB (AST2600, AST10x0 and AST2700)
* 0: 1 byte
* 0x1FFFFFF: 32M bytes
*/
@@ -1938,6 +1938,234 @@ static const TypeInfo aspeed_1030_spi2_info = {
.class_init = aspeed_1030_spi2_class_init,
};
+/*
+ * The FMC Segment Registers of the AST2700 have a 64KB unit.
+ * Only bits [31:16] are used for decoding.
+ */
+#define AST2700_SEG_ADDR_MASK 0xffff0000
+
+static uint32_t aspeed_2700_smc_segment_to_reg(const AspeedSMCState *s,
+ const AspeedSegments *seg)
+{
+ uint32_t reg = 0;
+
+ /* Disabled segments have a nil register */
+ if (!seg->size) {
+ return 0;
+ }
+
+ reg |= (seg->addr & AST2700_SEG_ADDR_MASK) >> 16; /* start offset */
+ reg |= (seg->addr + seg->size - 1) & AST2700_SEG_ADDR_MASK; /* end offset */
+ return reg;
+}
+
+static void aspeed_2700_smc_reg_to_segment(const AspeedSMCState *s,
+ uint32_t reg, AspeedSegments *seg)
+{
+ uint32_t start_offset = (reg << 16) & AST2700_SEG_ADDR_MASK;
+ uint32_t end_offset = reg & AST2700_SEG_ADDR_MASK;
+ AspeedSMCClass *asc = ASPEED_SMC_GET_CLASS(s);
+
+ if (reg) {
+ seg->addr = asc->flash_window_base + start_offset;
+ seg->size = end_offset + (64 * KiB) - start_offset;
+ } else {
+ seg->addr = asc->flash_window_base;
+ seg->size = 0;
+ }
+}
+
+static const uint32_t aspeed_2700_fmc_resets[ASPEED_SMC_R_MAX] = {
+ [R_CONF] = (CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE0 |
+ CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE1),
+ [R_CE_CTRL] = 0x0000aa00,
+ [R_CTRL0] = 0x406b0641,
+ [R_CTRL1] = 0x00000400,
+ [R_CTRL2] = 0x00000400,
+ [R_CTRL3] = 0x00000400,
+ [R_SEG_ADDR0] = 0x08000000,
+ [R_SEG_ADDR1] = 0x10000800,
+ [R_SEG_ADDR2] = 0x00000000,
+ [R_SEG_ADDR3] = 0x00000000,
+ [R_DUMMY_DATA] = 0x00010000,
+ [R_DMA_DRAM_ADDR_HIGH] = 0x00000000,
+ [R_TIMINGS] = 0x007b0000,
+};
+
+static const MemoryRegionOps aspeed_2700_smc_flash_ops = {
+ .read = aspeed_smc_flash_read,
+ .write = aspeed_smc_flash_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 1,
+ .max_access_size = 8,
+ },
+};
+
+static const AspeedSegments aspeed_2700_fmc_segments[] = {
+ { 0x0, 128 * MiB }, /* start address is readonly */
+ { 128 * MiB, 128 * MiB }, /* default is disabled but needed for -kernel */
+ { 256 * MiB, 128 * MiB }, /* default is disabled but needed for -kernel */
+ { 0x0, 0 }, /* disabled */
+};
+
+static void aspeed_2700_fmc_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass);
+
+ dc->desc = "Aspeed 2700 FMC Controller";
+ asc->r_conf = R_CONF;
+ asc->r_ce_ctrl = R_CE_CTRL;
+ asc->r_ctrl0 = R_CTRL0;
+ asc->r_timings = R_TIMINGS;
+ asc->nregs_timings = 3;
+ asc->conf_enable_w0 = CONF_ENABLE_W0;
+ asc->cs_num_max = 3;
+ asc->segments = aspeed_2700_fmc_segments;
+ asc->segment_addr_mask = 0xffffffff;
+ asc->resets = aspeed_2700_fmc_resets;
+ asc->flash_window_base = 0x100000000;
+ asc->flash_window_size = 1 * GiB;
+ asc->features = ASPEED_SMC_FEATURE_DMA |
+ ASPEED_SMC_FEATURE_DMA_DRAM_ADDR_HIGH;
+ asc->dma_flash_mask = 0x2FFFFFFC;
+ asc->dma_dram_mask = 0xFFFFFFFC;
+ asc->dma_start_length = 1;
+ asc->nregs = ASPEED_SMC_R_MAX;
+ asc->segment_to_reg = aspeed_2700_smc_segment_to_reg;
+ asc->reg_to_segment = aspeed_2700_smc_reg_to_segment;
+ asc->dma_ctrl = aspeed_2600_smc_dma_ctrl;
+ asc->reg_ops = &aspeed_2700_smc_flash_ops;
+}
+
+static const TypeInfo aspeed_2700_fmc_info = {
+ .name = "aspeed.fmc-ast2700",
+ .parent = TYPE_ASPEED_SMC,
+ .class_init = aspeed_2700_fmc_class_init,
+};
+
+static const AspeedSegments aspeed_2700_spi0_segments[] = {
+ { 0x0, 128 * MiB }, /* start address is readonly */
+ { 128 * MiB, 128 * MiB }, /* start address is readonly */
+ { 0x0, 0 }, /* disabled */
+};
+
+static void aspeed_2700_spi0_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass);
+
+ dc->desc = "Aspeed 2700 SPI0 Controller";
+ asc->r_conf = R_CONF;
+ asc->r_ce_ctrl = R_CE_CTRL;
+ asc->r_ctrl0 = R_CTRL0;
+ asc->r_timings = R_TIMINGS;
+ asc->nregs_timings = 2;
+ asc->conf_enable_w0 = CONF_ENABLE_W0;
+ asc->cs_num_max = 2;
+ asc->segments = aspeed_2700_spi0_segments;
+ asc->segment_addr_mask = 0xffffffff;
+ asc->flash_window_base = 0x180000000;
+ asc->flash_window_size = 1 * GiB;
+ asc->features = ASPEED_SMC_FEATURE_DMA |
+ ASPEED_SMC_FEATURE_DMA_DRAM_ADDR_HIGH;
+ asc->dma_flash_mask = 0x2FFFFFFC;
+ asc->dma_dram_mask = 0xFFFFFFFC;
+ asc->dma_start_length = 1;
+ asc->nregs = ASPEED_SMC_R_MAX;
+ asc->segment_to_reg = aspeed_2700_smc_segment_to_reg;
+ asc->reg_to_segment = aspeed_2700_smc_reg_to_segment;
+ asc->dma_ctrl = aspeed_2600_smc_dma_ctrl;
+ asc->reg_ops = &aspeed_2700_smc_flash_ops;
+}
+
+static const TypeInfo aspeed_2700_spi0_info = {
+ .name = "aspeed.spi0-ast2700",
+ .parent = TYPE_ASPEED_SMC,
+ .class_init = aspeed_2700_spi0_class_init,
+};
+
+static const AspeedSegments aspeed_2700_spi1_segments[] = {
+ { 0x0, 128 * MiB }, /* start address is readonly */
+ { 0x0, 0 }, /* disabled */
+};
+
+static void aspeed_2700_spi1_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass);
+
+ dc->desc = "Aspeed 2700 SPI1 Controller";
+ asc->r_conf = R_CONF;
+ asc->r_ce_ctrl = R_CE_CTRL;
+ asc->r_ctrl0 = R_CTRL0;
+ asc->r_timings = R_TIMINGS;
+ asc->nregs_timings = 2;
+ asc->conf_enable_w0 = CONF_ENABLE_W0;
+ asc->cs_num_max = 2;
+ asc->segments = aspeed_2700_spi1_segments;
+ asc->segment_addr_mask = 0xffffffff;
+ asc->flash_window_base = 0x200000000;
+ asc->flash_window_size = 1 * GiB;
+ asc->features = ASPEED_SMC_FEATURE_DMA |
+ ASPEED_SMC_FEATURE_DMA_DRAM_ADDR_HIGH;
+ asc->dma_flash_mask = 0x2FFFFFFC;
+ asc->dma_dram_mask = 0xFFFFFFFC;
+ asc->dma_start_length = 1;
+ asc->nregs = ASPEED_SMC_R_MAX;
+ asc->segment_to_reg = aspeed_2700_smc_segment_to_reg;
+ asc->reg_to_segment = aspeed_2700_smc_reg_to_segment;
+ asc->dma_ctrl = aspeed_2600_smc_dma_ctrl;
+ asc->reg_ops = &aspeed_2700_smc_flash_ops;
+}
+
+static const TypeInfo aspeed_2700_spi1_info = {
+ .name = "aspeed.spi1-ast2700",
+ .parent = TYPE_ASPEED_SMC,
+ .class_init = aspeed_2700_spi1_class_init,
+};
+
+static const AspeedSegments aspeed_2700_spi2_segments[] = {
+ { 0x0, 128 * MiB }, /* start address is readonly */
+ { 0x0, 0 }, /* disabled */
+};
+
+static void aspeed_2700_spi2_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass);
+
+ dc->desc = "Aspeed 2700 SPI2 Controller";
+ asc->r_conf = R_CONF;
+ asc->r_ce_ctrl = R_CE_CTRL;
+ asc->r_ctrl0 = R_CTRL0;
+ asc->r_timings = R_TIMINGS;
+ asc->nregs_timings = 2;
+ asc->conf_enable_w0 = CONF_ENABLE_W0;
+ asc->cs_num_max = 2;
+ asc->segments = aspeed_2700_spi2_segments;
+ asc->segment_addr_mask = 0xffffffff;
+ asc->flash_window_base = 0x280000000;
+ asc->flash_window_size = 1 * GiB;
+ asc->features = ASPEED_SMC_FEATURE_DMA |
+ ASPEED_SMC_FEATURE_DMA_DRAM_ADDR_HIGH;
+ asc->dma_flash_mask = 0x0FFFFFFC;
+ asc->dma_dram_mask = 0xFFFFFFFC;
+ asc->dma_start_length = 1;
+ asc->nregs = ASPEED_SMC_R_MAX;
+ asc->segment_to_reg = aspeed_2700_smc_segment_to_reg;
+ asc->reg_to_segment = aspeed_2700_smc_reg_to_segment;
+ asc->dma_ctrl = aspeed_2600_smc_dma_ctrl;
+ asc->reg_ops = &aspeed_2700_smc_flash_ops;
+}
+
+static const TypeInfo aspeed_2700_spi2_info = {
+ .name = "aspeed.spi2-ast2700",
+ .parent = TYPE_ASPEED_SMC,
+ .class_init = aspeed_2700_spi2_class_init,
+};
+
static void aspeed_smc_register_types(void)
{
type_register_static(&aspeed_smc_flash_info);
@@ -1954,6 +2182,10 @@ static void aspeed_smc_register_types(void)
type_register_static(&aspeed_1030_fmc_info);
type_register_static(&aspeed_1030_spi1_info);
type_register_static(&aspeed_1030_spi2_info);
+ type_register_static(&aspeed_2700_fmc_info);
+ type_register_static(&aspeed_2700_spi0_info);
+ type_register_static(&aspeed_2700_spi1_info);
+ type_register_static(&aspeed_2700_spi2_info);
}
type_init(aspeed_smc_register_types)
--
2.25.1
WARNING: multiple messages have this Message-ID (diff)
From: Jamin Lin via <qemu-devel@nongnu.org>
To: "Cédric Le Goater" <clg@kaod.org>,
"Peter Maydell" <peter.maydell@linaro.org>,
"Andrew Jeffery" <andrew@codeconstruct.com.au>,
"Joel Stanley" <joel@jms.id.au>,
"Alistair Francis" <alistair@alistair23.me>,
"Cleber Rosa" <crosa@redhat.com>,
"Philippe Mathieu-Daudé" <philmd@linaro.org>,
"Wainer dos Santos Moschetta" <wainersm@redhat.com>,
"Beraldo Leal" <bleal@redhat.com>,
"open list:ASPEED BMCs" <qemu-arm@nongnu.org>,
"open list:All patches CC here" <qemu-devel@nongnu.org>
Cc: <jamin_lin@aspeedtech.com>, <troy_lee@aspeedtech.com>,
<yunlin.tang@aspeedtech.com>
Subject: [PATCH v5 10/17] aspeed/smc: Add AST2700 support
Date: Tue, 4 Jun 2024 13:44:31 +0800 [thread overview]
Message-ID: <20240604054438.3424349-11-jamin_lin@aspeedtech.com> (raw)
In-Reply-To: <20240604054438.3424349-1-jamin_lin@aspeedtech.com>
AST2700 fmc/spi controller's address decoding unit is 64KB
and only bits [31:16] are used for decoding. Introduce seg_to_reg
and reg_to_seg handlers for ast2700 fmc/spi controller.
In addition, adds ast2700 fmc, spi0, spi1, and spi2 class init handler.
AST2700 is a 64 bits quad core CPUs(Cortex-a35). Introduce a new
"aspeed_2700_smc_flash_ops" and set its valid "max_access_size"
8 for 64 bits data format access.
Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
hw/ssi/aspeed_smc.c | 234 +++++++++++++++++++++++++++++++++++++++++++-
1 file changed, 233 insertions(+), 1 deletion(-)
diff --git a/hw/ssi/aspeed_smc.c b/hw/ssi/aspeed_smc.c
index 129d06690d..49205ab76d 100644
--- a/hw/ssi/aspeed_smc.c
+++ b/hw/ssi/aspeed_smc.c
@@ -185,7 +185,7 @@
* 0: 4 bytes
* 0x1FFFFFC: 32M bytes
*
- * DMA length is from 1 byte to 32MB (AST2600, AST10x0)
+ * DMA length is from 1 byte to 32MB (AST2600, AST10x0 and AST2700)
* 0: 1 byte
* 0x1FFFFFF: 32M bytes
*/
@@ -1938,6 +1938,234 @@ static const TypeInfo aspeed_1030_spi2_info = {
.class_init = aspeed_1030_spi2_class_init,
};
+/*
+ * The FMC Segment Registers of the AST2700 have a 64KB unit.
+ * Only bits [31:16] are used for decoding.
+ */
+#define AST2700_SEG_ADDR_MASK 0xffff0000
+
+static uint32_t aspeed_2700_smc_segment_to_reg(const AspeedSMCState *s,
+ const AspeedSegments *seg)
+{
+ uint32_t reg = 0;
+
+ /* Disabled segments have a nil register */
+ if (!seg->size) {
+ return 0;
+ }
+
+ reg |= (seg->addr & AST2700_SEG_ADDR_MASK) >> 16; /* start offset */
+ reg |= (seg->addr + seg->size - 1) & AST2700_SEG_ADDR_MASK; /* end offset */
+ return reg;
+}
+
+static void aspeed_2700_smc_reg_to_segment(const AspeedSMCState *s,
+ uint32_t reg, AspeedSegments *seg)
+{
+ uint32_t start_offset = (reg << 16) & AST2700_SEG_ADDR_MASK;
+ uint32_t end_offset = reg & AST2700_SEG_ADDR_MASK;
+ AspeedSMCClass *asc = ASPEED_SMC_GET_CLASS(s);
+
+ if (reg) {
+ seg->addr = asc->flash_window_base + start_offset;
+ seg->size = end_offset + (64 * KiB) - start_offset;
+ } else {
+ seg->addr = asc->flash_window_base;
+ seg->size = 0;
+ }
+}
+
+static const uint32_t aspeed_2700_fmc_resets[ASPEED_SMC_R_MAX] = {
+ [R_CONF] = (CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE0 |
+ CONF_FLASH_TYPE_SPI << CONF_FLASH_TYPE1),
+ [R_CE_CTRL] = 0x0000aa00,
+ [R_CTRL0] = 0x406b0641,
+ [R_CTRL1] = 0x00000400,
+ [R_CTRL2] = 0x00000400,
+ [R_CTRL3] = 0x00000400,
+ [R_SEG_ADDR0] = 0x08000000,
+ [R_SEG_ADDR1] = 0x10000800,
+ [R_SEG_ADDR2] = 0x00000000,
+ [R_SEG_ADDR3] = 0x00000000,
+ [R_DUMMY_DATA] = 0x00010000,
+ [R_DMA_DRAM_ADDR_HIGH] = 0x00000000,
+ [R_TIMINGS] = 0x007b0000,
+};
+
+static const MemoryRegionOps aspeed_2700_smc_flash_ops = {
+ .read = aspeed_smc_flash_read,
+ .write = aspeed_smc_flash_write,
+ .endianness = DEVICE_LITTLE_ENDIAN,
+ .valid = {
+ .min_access_size = 1,
+ .max_access_size = 8,
+ },
+};
+
+static const AspeedSegments aspeed_2700_fmc_segments[] = {
+ { 0x0, 128 * MiB }, /* start address is readonly */
+ { 128 * MiB, 128 * MiB }, /* default is disabled but needed for -kernel */
+ { 256 * MiB, 128 * MiB }, /* default is disabled but needed for -kernel */
+ { 0x0, 0 }, /* disabled */
+};
+
+static void aspeed_2700_fmc_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass);
+
+ dc->desc = "Aspeed 2700 FMC Controller";
+ asc->r_conf = R_CONF;
+ asc->r_ce_ctrl = R_CE_CTRL;
+ asc->r_ctrl0 = R_CTRL0;
+ asc->r_timings = R_TIMINGS;
+ asc->nregs_timings = 3;
+ asc->conf_enable_w0 = CONF_ENABLE_W0;
+ asc->cs_num_max = 3;
+ asc->segments = aspeed_2700_fmc_segments;
+ asc->segment_addr_mask = 0xffffffff;
+ asc->resets = aspeed_2700_fmc_resets;
+ asc->flash_window_base = 0x100000000;
+ asc->flash_window_size = 1 * GiB;
+ asc->features = ASPEED_SMC_FEATURE_DMA |
+ ASPEED_SMC_FEATURE_DMA_DRAM_ADDR_HIGH;
+ asc->dma_flash_mask = 0x2FFFFFFC;
+ asc->dma_dram_mask = 0xFFFFFFFC;
+ asc->dma_start_length = 1;
+ asc->nregs = ASPEED_SMC_R_MAX;
+ asc->segment_to_reg = aspeed_2700_smc_segment_to_reg;
+ asc->reg_to_segment = aspeed_2700_smc_reg_to_segment;
+ asc->dma_ctrl = aspeed_2600_smc_dma_ctrl;
+ asc->reg_ops = &aspeed_2700_smc_flash_ops;
+}
+
+static const TypeInfo aspeed_2700_fmc_info = {
+ .name = "aspeed.fmc-ast2700",
+ .parent = TYPE_ASPEED_SMC,
+ .class_init = aspeed_2700_fmc_class_init,
+};
+
+static const AspeedSegments aspeed_2700_spi0_segments[] = {
+ { 0x0, 128 * MiB }, /* start address is readonly */
+ { 128 * MiB, 128 * MiB }, /* start address is readonly */
+ { 0x0, 0 }, /* disabled */
+};
+
+static void aspeed_2700_spi0_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass);
+
+ dc->desc = "Aspeed 2700 SPI0 Controller";
+ asc->r_conf = R_CONF;
+ asc->r_ce_ctrl = R_CE_CTRL;
+ asc->r_ctrl0 = R_CTRL0;
+ asc->r_timings = R_TIMINGS;
+ asc->nregs_timings = 2;
+ asc->conf_enable_w0 = CONF_ENABLE_W0;
+ asc->cs_num_max = 2;
+ asc->segments = aspeed_2700_spi0_segments;
+ asc->segment_addr_mask = 0xffffffff;
+ asc->flash_window_base = 0x180000000;
+ asc->flash_window_size = 1 * GiB;
+ asc->features = ASPEED_SMC_FEATURE_DMA |
+ ASPEED_SMC_FEATURE_DMA_DRAM_ADDR_HIGH;
+ asc->dma_flash_mask = 0x2FFFFFFC;
+ asc->dma_dram_mask = 0xFFFFFFFC;
+ asc->dma_start_length = 1;
+ asc->nregs = ASPEED_SMC_R_MAX;
+ asc->segment_to_reg = aspeed_2700_smc_segment_to_reg;
+ asc->reg_to_segment = aspeed_2700_smc_reg_to_segment;
+ asc->dma_ctrl = aspeed_2600_smc_dma_ctrl;
+ asc->reg_ops = &aspeed_2700_smc_flash_ops;
+}
+
+static const TypeInfo aspeed_2700_spi0_info = {
+ .name = "aspeed.spi0-ast2700",
+ .parent = TYPE_ASPEED_SMC,
+ .class_init = aspeed_2700_spi0_class_init,
+};
+
+static const AspeedSegments aspeed_2700_spi1_segments[] = {
+ { 0x0, 128 * MiB }, /* start address is readonly */
+ { 0x0, 0 }, /* disabled */
+};
+
+static void aspeed_2700_spi1_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass);
+
+ dc->desc = "Aspeed 2700 SPI1 Controller";
+ asc->r_conf = R_CONF;
+ asc->r_ce_ctrl = R_CE_CTRL;
+ asc->r_ctrl0 = R_CTRL0;
+ asc->r_timings = R_TIMINGS;
+ asc->nregs_timings = 2;
+ asc->conf_enable_w0 = CONF_ENABLE_W0;
+ asc->cs_num_max = 2;
+ asc->segments = aspeed_2700_spi1_segments;
+ asc->segment_addr_mask = 0xffffffff;
+ asc->flash_window_base = 0x200000000;
+ asc->flash_window_size = 1 * GiB;
+ asc->features = ASPEED_SMC_FEATURE_DMA |
+ ASPEED_SMC_FEATURE_DMA_DRAM_ADDR_HIGH;
+ asc->dma_flash_mask = 0x2FFFFFFC;
+ asc->dma_dram_mask = 0xFFFFFFFC;
+ asc->dma_start_length = 1;
+ asc->nregs = ASPEED_SMC_R_MAX;
+ asc->segment_to_reg = aspeed_2700_smc_segment_to_reg;
+ asc->reg_to_segment = aspeed_2700_smc_reg_to_segment;
+ asc->dma_ctrl = aspeed_2600_smc_dma_ctrl;
+ asc->reg_ops = &aspeed_2700_smc_flash_ops;
+}
+
+static const TypeInfo aspeed_2700_spi1_info = {
+ .name = "aspeed.spi1-ast2700",
+ .parent = TYPE_ASPEED_SMC,
+ .class_init = aspeed_2700_spi1_class_init,
+};
+
+static const AspeedSegments aspeed_2700_spi2_segments[] = {
+ { 0x0, 128 * MiB }, /* start address is readonly */
+ { 0x0, 0 }, /* disabled */
+};
+
+static void aspeed_2700_spi2_class_init(ObjectClass *klass, void *data)
+{
+ DeviceClass *dc = DEVICE_CLASS(klass);
+ AspeedSMCClass *asc = ASPEED_SMC_CLASS(klass);
+
+ dc->desc = "Aspeed 2700 SPI2 Controller";
+ asc->r_conf = R_CONF;
+ asc->r_ce_ctrl = R_CE_CTRL;
+ asc->r_ctrl0 = R_CTRL0;
+ asc->r_timings = R_TIMINGS;
+ asc->nregs_timings = 2;
+ asc->conf_enable_w0 = CONF_ENABLE_W0;
+ asc->cs_num_max = 2;
+ asc->segments = aspeed_2700_spi2_segments;
+ asc->segment_addr_mask = 0xffffffff;
+ asc->flash_window_base = 0x280000000;
+ asc->flash_window_size = 1 * GiB;
+ asc->features = ASPEED_SMC_FEATURE_DMA |
+ ASPEED_SMC_FEATURE_DMA_DRAM_ADDR_HIGH;
+ asc->dma_flash_mask = 0x0FFFFFFC;
+ asc->dma_dram_mask = 0xFFFFFFFC;
+ asc->dma_start_length = 1;
+ asc->nregs = ASPEED_SMC_R_MAX;
+ asc->segment_to_reg = aspeed_2700_smc_segment_to_reg;
+ asc->reg_to_segment = aspeed_2700_smc_reg_to_segment;
+ asc->dma_ctrl = aspeed_2600_smc_dma_ctrl;
+ asc->reg_ops = &aspeed_2700_smc_flash_ops;
+}
+
+static const TypeInfo aspeed_2700_spi2_info = {
+ .name = "aspeed.spi2-ast2700",
+ .parent = TYPE_ASPEED_SMC,
+ .class_init = aspeed_2700_spi2_class_init,
+};
+
static void aspeed_smc_register_types(void)
{
type_register_static(&aspeed_smc_flash_info);
@@ -1954,6 +2182,10 @@ static void aspeed_smc_register_types(void)
type_register_static(&aspeed_1030_fmc_info);
type_register_static(&aspeed_1030_spi1_info);
type_register_static(&aspeed_1030_spi2_info);
+ type_register_static(&aspeed_2700_fmc_info);
+ type_register_static(&aspeed_2700_spi0_info);
+ type_register_static(&aspeed_2700_spi1_info);
+ type_register_static(&aspeed_2700_spi2_info);
}
type_init(aspeed_smc_register_types)
--
2.25.1
next prev parent reply other threads:[~2024-06-04 5:45 UTC|newest]
Thread overview: 39+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-04 5:44 [PATCH v5 00/17] Add AST2700 support Jamin Lin via
2024-06-04 5:44 ` [PATCH v5 01/17] aspeed/wdt: " Jamin Lin via
2024-06-04 5:44 ` [PATCH v5 02/17] aspeed/sli: " Jamin Lin via
2024-06-04 5:44 ` [PATCH v5 03/17] aspeed/sdmc: remove redundant macros Jamin Lin via
2024-06-04 5:44 ` Jamin Lin via
2024-06-04 5:44 ` [PATCH v5 04/17] aspeed/sdmc: fix coding style Jamin Lin via
2024-06-04 5:44 ` [PATCH v5 05/17] aspeed/sdmc: Add AST2700 support Jamin Lin via
2024-06-04 5:44 ` Jamin Lin via
2024-06-04 6:10 ` Cédric Le Goater
2024-06-04 5:44 ` [PATCH v5 06/17] aspeed/smc: correct device description Jamin Lin via
2024-06-04 5:44 ` [PATCH v5 07/17] aspeed/smc: support dma start length and 1 byte length unit Jamin Lin via
2024-06-04 5:44 ` [PATCH v5 08/17] aspeed/smc: support 64 bits dma dram address Jamin Lin via
2024-06-04 5:44 ` [PATCH v5 09/17] aspeed/smc: support different memory region ops for SMC flash region Jamin Lin via
2024-06-04 5:44 ` Jamin Lin via
2024-06-04 6:11 ` Cédric Le Goater
2024-06-04 5:44 ` Jamin Lin via [this message]
2024-06-04 5:44 ` [PATCH v5 10/17] aspeed/smc: Add AST2700 support Jamin Lin via
2024-06-04 6:12 ` Cédric Le Goater
2024-06-04 5:44 ` [PATCH v5 11/17] aspeed/scu: " Jamin Lin via
2024-06-04 5:44 ` Jamin Lin via
2024-06-04 5:44 ` [PATCH v5 12/17] aspeed/intc: " Jamin Lin via
2024-06-04 7:18 ` Cédric Le Goater
2024-06-04 5:44 ` [PATCH v5 13/17] aspeed/soc: " Jamin Lin via
2024-06-04 5:44 ` Jamin Lin via
2024-06-04 6:17 ` Cédric Le Goater
2025-01-30 15:13 ` Philippe Mathieu-Daudé
2025-02-03 7:28 ` Jamin Lin
2025-02-03 7:43 ` Jamin Lin
2025-02-03 16:40 ` Philippe Mathieu-Daudé
2025-02-04 3:22 ` Jamin Lin
2024-06-04 5:44 ` [PATCH v5 14/17] aspeed: Add an AST2700 eval board Jamin Lin via
2024-06-04 5:44 ` [PATCH v5 15/17] aspeed/soc: fix incorrect dram size for AST2700 Jamin Lin via
2024-06-04 6:13 ` Cédric Le Goater
2024-06-04 5:44 ` [PATCH v5 16/17] test/avocado/machine_aspeed.py: Add AST2700 test case Jamin Lin via
2024-06-04 5:44 ` [PATCH v5 17/17] docs:aspeed: Add AST2700 Evaluation board Jamin Lin via
2024-06-04 5:44 ` Jamin Lin via
2024-06-04 11:51 ` [PATCH v5 00/17] Add AST2700 support Cédric Le Goater
2024-06-05 0:40 ` Jamin Lin
2024-06-10 9:23 ` Cédric Le Goater
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240604054438.3424349-11-jamin_lin@aspeedtech.com \
--to=qemu-arm@nongnu.org \
--cc=alistair@alistair23.me \
--cc=andrew@codeconstruct.com.au \
--cc=bleal@redhat.com \
--cc=clg@kaod.org \
--cc=crosa@redhat.com \
--cc=jamin_lin@aspeedtech.com \
--cc=joel@jms.id.au \
--cc=peter.maydell@linaro.org \
--cc=philmd@linaro.org \
--cc=qemu-devel@nongnu.org \
--cc=troy_lee@aspeedtech.com \
--cc=wainersm@redhat.com \
--cc=yunlin.tang@aspeedtech.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.