From: Frank Li <Frank.Li@nxp.com>
To: Shawn Guo <shawnguo@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
linux-arm-kernel@lists.infradead.org (moderated
list:ARM/FREESCALE LAYERSCAPE ARM ARCHITECTURE),
devicetree@vger.kernel.org (open list:OPEN FIRMWARE AND
FLATTENED DEVICE TREE BINDINGS),
linux-kernel@vger.kernel.org (open list)
Cc: imx@lists.linux.dev
Subject: [PATCH v2 02/13] arm64: dts: layerscape: add platform special compatible string for gpio
Date: Wed, 26 Jun 2024 16:25:22 -0400 [thread overview]
Message-ID: <20240626202533.2182846-3-Frank.Li@nxp.com> (raw)
In-Reply-To: <20240626202533.2182846-1-Frank.Li@nxp.com>
Add platform special compatible string for all gpio controller to fix
below warning.
gpio@2300000: compatible: 'oneOf' conditional failed, one must be fixed:
['fsl,qoriq-gpio'] is too short
'fsl,qoriq-gpio' is not one of ['fsl,mpc5121-gpio', 'fsl,mpc5125-gpio', 'fsl,mpc8349-gpio', 'fsl,mpc8572-gpio', 'fsl,mpc8610-gpio', 'fsl,pq3-gpio']
'fsl,qoriq-gpio' is not one of ['fsl,ls1021a-gpio', 'fsl,ls1028a-gpio', 'fsl,ls1043a-gpio', 'fsl,ls1088a-gpio', 'fsl,ls2080a-gpio']
Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi | 4 ++--
arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi | 8 ++++----
arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi | 8 ++++----
3 files changed, 10 insertions(+), 10 deletions(-)
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
index 2e1cddc11bf47..1b6ab9550cce9 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1012a.dtsi
@@ -407,7 +407,7 @@ duart1: serial@21c0600 {
};
gpio0: gpio@2300000 {
- compatible = "fsl,qoriq-gpio";
+ compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
reg = <0x0 0x2300000 0x0 0x10000>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
@@ -417,7 +417,7 @@ gpio0: gpio@2300000 {
};
gpio1: gpio@2310000 {
- compatible = "fsl,qoriq-gpio";
+ compatible = "fsl,ls1021a-gpio", "fsl,qoriq-gpio";
reg = <0x0 0x2310000 0x0 0x10000>;
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
diff --git a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
index f8c9489507e7a..524b44f424272 100644
--- a/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-ls1046a.dtsi
@@ -589,7 +589,7 @@ duart3: serial@21d0600 {
};
gpio0: gpio@2300000 {
- compatible = "fsl,qoriq-gpio";
+ compatible = "fsl,ls1046a-gpio", "fsl,qoriq-gpio";
reg = <0x0 0x2300000 0x0 0x10000>;
interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
@@ -599,7 +599,7 @@ gpio0: gpio@2300000 {
};
gpio1: gpio@2310000 {
- compatible = "fsl,qoriq-gpio";
+ compatible = "fsl,ls1046a-gpio", "fsl,qoriq-gpio";
reg = <0x0 0x2310000 0x0 0x10000>;
interrupts = <GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
@@ -609,7 +609,7 @@ gpio1: gpio@2310000 {
};
gpio2: gpio@2320000 {
- compatible = "fsl,qoriq-gpio";
+ compatible = "fsl,ls1046a-gpio", "fsl,qoriq-gpio";
reg = <0x0 0x2320000 0x0 0x10000>;
interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
@@ -619,7 +619,7 @@ gpio2: gpio@2320000 {
};
gpio3: gpio@2330000 {
- compatible = "fsl,qoriq-gpio";
+ compatible = "fsl,ls1046a-gpio", "fsl,qoriq-gpio";
reg = <0x0 0x2330000 0x0 0x10000>;
interrupts = <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
diff --git a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
index 40159f58c6f94..da49f274e9d5a 100644
--- a/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
+++ b/arch/arm64/boot/dts/freescale/fsl-lx2160a.dtsi
@@ -1027,7 +1027,7 @@ QORIQ_CLK_PLL_DIV(8)>,
};
gpio0: gpio@2300000 {
- compatible = "fsl,qoriq-gpio";
+ compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
reg = <0x0 0x2300000 0x0 0x10000>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
@@ -1038,7 +1038,7 @@ gpio0: gpio@2300000 {
};
gpio1: gpio@2310000 {
- compatible = "fsl,qoriq-gpio";
+ compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
reg = <0x0 0x2310000 0x0 0x10000>;
interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
@@ -1049,7 +1049,7 @@ gpio1: gpio@2310000 {
};
gpio2: gpio@2320000 {
- compatible = "fsl,qoriq-gpio";
+ compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
reg = <0x0 0x2320000 0x0 0x10000>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
@@ -1060,7 +1060,7 @@ gpio2: gpio@2320000 {
};
gpio3: gpio@2330000 {
- compatible = "fsl,qoriq-gpio";
+ compatible = "fsl,ls2080a-gpio", "fsl,qoriq-gpio";
reg = <0x0 0x2330000 0x0 0x10000>;
interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
gpio-controller;
--
2.34.1
next prev parent reply other threads:[~2024-06-26 20:25 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-06-26 20:25 [PATCH v2 00/13] arm64: dts: layerscaple: clean up some simple CHECK_WARNING Frank Li
2024-06-26 20:25 ` [PATCH v2 01/13] arm64: dts: layerscape: rename node 'timer' as 'rtc' Frank Li
2024-06-26 20:28 ` [PATCH v2 00/13] arm64: dts: layerscaple: clean up some simple CHECK_WARNING Frank Li
2024-06-27 10:37 ` Shawn Guo
2024-06-26 20:25 ` Frank Li [this message]
2024-07-01 16:43 ` [PATCH v2 02/13] arm64: dts: layerscape: add platform special compatible string for gpio Rob Herring
2024-07-01 18:51 ` Frank Li
2024-06-26 20:25 ` [PATCH v2 03/13] arm64: dts: fsl-lx2160a: fix #address-cells for pinctrl-single Frank Li
2024-06-26 20:25 ` [PATCH v2 04/13] arm64: dts: fsl-ls1012a: remove property 'snps,host-vbus-glitches' Frank Li
2024-06-26 20:25 ` [PATCH v2 05/13] arm64: dts: layerscape: replace node name 'nor' with 'flash' Frank Li
2024-06-26 20:25 ` [PATCH v2 06/13] arm64: dts: layerscape: remove compatible string 'fsl,fman-xmdio' for fman3 Frank Li
2024-06-26 20:25 ` [PATCH v2 07/13] arm64: dts: layerscaple: add #dma-cells for qdma Frank Li
2024-06-27 17:17 ` Rob Herring
2024-06-27 17:22 ` Rob Herring
2024-06-27 18:27 ` Frank Li
2024-06-28 2:34 ` Shawn Guo
2024-06-26 20:25 ` [PATCH v2 08/13] arm64: dts: layerscape: rename node name "wdt" to "watchdog" Frank Li
2024-06-26 20:25 ` [PATCH v2 09/13] arm64: dts: layerscape: change pcie interrupt order Frank Li
2024-06-26 20:25 ` [PATCH v2 10/13] arm64: dts: layerscape: rename aux_bus to aux-bus Frank Li
2024-06-26 20:25 ` [PATCH v2 11/13] arm64: dts: fsl-ls1043a: remove unused clk-name at watchdog node Frank Li
2024-06-26 20:25 ` [PATCH v2 12/13] arm64: dts: fsl-ls1046a: rename thermal node name Frank Li
2024-06-26 20:25 ` [PATCH v2 13/13] arm64: dts: layerscape: rename b(q)man-portals to b(q)man-portals-bus Frank Li
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240626202533.2182846-3-Frank.Li@nxp.com \
--to=frank.li@nxp.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=imx@lists.linux.dev \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
--cc=shawnguo@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.