From: Tomer Maimon <tmaimon77@gmail.com>
To: <linus.walleij@linaro.org>, <avifishman70@gmail.com>,
<tali.perry1@gmail.com>, <joel@jms.id.au>, <venture@google.com>,
<yuenn@google.com>, <benjaminfair@google.com>
Cc: <openbmc@lists.ozlabs.org>, <linux-kernel@vger.kernel.org>,
<linux-gpio@vger.kernel.org>, Tomer Maimon <tmaimon77@gmail.com>
Subject: [PATCH v1 2/7] pinctrl: nuvoton: npcm8xx: add gpi35 and gpi36
Date: Thu, 11 Jul 2024 22:37:44 +0300 [thread overview]
Message-ID: <20240711193749.2397471-3-tmaimon77@gmail.com> (raw)
In-Reply-To: <20240711193749.2397471-1-tmaimon77@gmail.com>
This patch adds support for GPIO pins GPI35 and GPI36 on the Nuvoton
NPCM8xx BMC SoC.
The pins are configured for only for input.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
---
drivers/pinctrl/nuvoton/pinctrl-npcm8xx.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/pinctrl/nuvoton/pinctrl-npcm8xx.c b/drivers/pinctrl/nuvoton/pinctrl-npcm8xx.c
index 0cd8a5e00cde..cf021d0e8099 100644
--- a/drivers/pinctrl/nuvoton/pinctrl-npcm8xx.c
+++ b/drivers/pinctrl/nuvoton/pinctrl-npcm8xx.c
@@ -316,8 +316,8 @@ static struct irq_chip npcmgpio_irqchip = {
GPIOCHIP_IRQ_RESOURCE_HELPERS,
};
-static const int gpi36_pins[] = { 58 };
-static const int gpi35_pins[] = { 58 };
+static const int gpi36_pins[] = { 36 };
+static const int gpi35_pins[] = { 35 };
static const int tp_jtag3_pins[] = { 44, 62, 45, 46 };
static const int tp_uart_pins[] = { 50, 51 };
@@ -1366,6 +1366,8 @@ static const struct npcm8xx_pincfg pincfg[] = {
NPCM8XX_PINCFG(32, spi0cs1, MFSEL1, 3, smb14b, MFSEL7, 26, none, NONE, 0, none, NONE, 0, none, NONE, 0, SLEW),
NPCM8XX_PINCFG(33, i3c4, MFSEL6, 10, none, NONE, 0, none, NONE, 0, none, NONE, 0, none, NONE, 0, SLEW),
NPCM8XX_PINCFG(34, i3c4, MFSEL6, 10, none, NONE, 0, none, NONE, 0, none, NONE, 0, none, NONE, 0, SLEW),
+ NPCM8XX_PINCFG(35, gpi35, MFSEL5, 16, none, NONE, 0, none, NONE, 0, none, NONE, 0, none, NONE, 0, 0),
+ NPCM8XX_PINCFG(36, gpi36, MFSEL5, 18, none, NONE, 0, none, NONE, 0, none, NONE, 0, none, NONE, 0, 0),
NPCM8XX_PINCFG(37, smb3c, I2CSEGSEL, 12, smb23, MFSEL5, 31, none, NONE, 0, none, NONE, 0, none, NONE, 0, SLEW),
NPCM8XX_PINCFG(38, smb3c, I2CSEGSEL, 12, smb23, MFSEL5, 31, none, NONE, 0, none, NONE, 0, none, NONE, 0, SLEW),
NPCM8XX_PINCFG(39, smb3b, I2CSEGSEL, 11, smb22, MFSEL5, 30, none, NONE, 0, none, NONE, 0, none, NONE, 0, SLEW),
@@ -1611,6 +1613,8 @@ static const struct pinctrl_pin_desc npcm8xx_pins[] = {
PINCTRL_PIN(32, "GPIO32/SMB14B_SCL/SPI0_nCS1"),
PINCTRL_PIN(33, "GPIO33/I3C4_SCL"),
PINCTRL_PIN(34, "GPIO34/I3C4_SDA"),
+ PINCTRL_PIN(35, "MCBPCK/GPI35_AHB2PCI_DIS"),
+ PINCTRL_PIN(36, "SYSBPCK/GPI36"),
PINCTRL_PIN(37, "GPIO37/SMB3C_SDA/SMB23_SDA"),
PINCTRL_PIN(38, "GPIO38/SMB3C_SCL/SMB23_SCL"),
PINCTRL_PIN(39, "GPIO39/SMB3B_SDA/SMB22_SDA"),
@@ -2045,7 +2049,7 @@ static int npcm8xx_gpio_request_enable(struct pinctrl_dev *pctldev,
const unsigned int *pin = &offset;
int mode = fn_gpio;
- if (pin[0] >= 183 && pin[0] <= 189)
+ if ((pin[0] >= 183 && pin[0] <= 189) || pin[0] == 35 || pin[0] == 36)
mode = pincfg[pin[0]].fn0;
npcm8xx_setfunc(npcm->gcr_regmap, &offset, 1, mode);
--
2.34.1
WARNING: multiple messages have this Message-ID (diff)
From: Tomer Maimon <tmaimon77@gmail.com>
To: <linus.walleij@linaro.org>, <avifishman70@gmail.com>,
<tali.perry1@gmail.com>, <joel@jms.id.au>, <venture@google.com>,
<yuenn@google.com>, <benjaminfair@google.com>
Cc: linux-gpio@vger.kernel.org, openbmc@lists.ozlabs.org,
linux-kernel@vger.kernel.org, Tomer Maimon <tmaimon77@gmail.com>
Subject: [PATCH v1 2/7] pinctrl: nuvoton: npcm8xx: add gpi35 and gpi36
Date: Thu, 11 Jul 2024 22:37:44 +0300 [thread overview]
Message-ID: <20240711193749.2397471-3-tmaimon77@gmail.com> (raw)
In-Reply-To: <20240711193749.2397471-1-tmaimon77@gmail.com>
This patch adds support for GPIO pins GPI35 and GPI36 on the Nuvoton
NPCM8xx BMC SoC.
The pins are configured for only for input.
Signed-off-by: Tomer Maimon <tmaimon77@gmail.com>
---
drivers/pinctrl/nuvoton/pinctrl-npcm8xx.c | 10 +++++++---
1 file changed, 7 insertions(+), 3 deletions(-)
diff --git a/drivers/pinctrl/nuvoton/pinctrl-npcm8xx.c b/drivers/pinctrl/nuvoton/pinctrl-npcm8xx.c
index 0cd8a5e00cde..cf021d0e8099 100644
--- a/drivers/pinctrl/nuvoton/pinctrl-npcm8xx.c
+++ b/drivers/pinctrl/nuvoton/pinctrl-npcm8xx.c
@@ -316,8 +316,8 @@ static struct irq_chip npcmgpio_irqchip = {
GPIOCHIP_IRQ_RESOURCE_HELPERS,
};
-static const int gpi36_pins[] = { 58 };
-static const int gpi35_pins[] = { 58 };
+static const int gpi36_pins[] = { 36 };
+static const int gpi35_pins[] = { 35 };
static const int tp_jtag3_pins[] = { 44, 62, 45, 46 };
static const int tp_uart_pins[] = { 50, 51 };
@@ -1366,6 +1366,8 @@ static const struct npcm8xx_pincfg pincfg[] = {
NPCM8XX_PINCFG(32, spi0cs1, MFSEL1, 3, smb14b, MFSEL7, 26, none, NONE, 0, none, NONE, 0, none, NONE, 0, SLEW),
NPCM8XX_PINCFG(33, i3c4, MFSEL6, 10, none, NONE, 0, none, NONE, 0, none, NONE, 0, none, NONE, 0, SLEW),
NPCM8XX_PINCFG(34, i3c4, MFSEL6, 10, none, NONE, 0, none, NONE, 0, none, NONE, 0, none, NONE, 0, SLEW),
+ NPCM8XX_PINCFG(35, gpi35, MFSEL5, 16, none, NONE, 0, none, NONE, 0, none, NONE, 0, none, NONE, 0, 0),
+ NPCM8XX_PINCFG(36, gpi36, MFSEL5, 18, none, NONE, 0, none, NONE, 0, none, NONE, 0, none, NONE, 0, 0),
NPCM8XX_PINCFG(37, smb3c, I2CSEGSEL, 12, smb23, MFSEL5, 31, none, NONE, 0, none, NONE, 0, none, NONE, 0, SLEW),
NPCM8XX_PINCFG(38, smb3c, I2CSEGSEL, 12, smb23, MFSEL5, 31, none, NONE, 0, none, NONE, 0, none, NONE, 0, SLEW),
NPCM8XX_PINCFG(39, smb3b, I2CSEGSEL, 11, smb22, MFSEL5, 30, none, NONE, 0, none, NONE, 0, none, NONE, 0, SLEW),
@@ -1611,6 +1613,8 @@ static const struct pinctrl_pin_desc npcm8xx_pins[] = {
PINCTRL_PIN(32, "GPIO32/SMB14B_SCL/SPI0_nCS1"),
PINCTRL_PIN(33, "GPIO33/I3C4_SCL"),
PINCTRL_PIN(34, "GPIO34/I3C4_SDA"),
+ PINCTRL_PIN(35, "MCBPCK/GPI35_AHB2PCI_DIS"),
+ PINCTRL_PIN(36, "SYSBPCK/GPI36"),
PINCTRL_PIN(37, "GPIO37/SMB3C_SDA/SMB23_SDA"),
PINCTRL_PIN(38, "GPIO38/SMB3C_SCL/SMB23_SCL"),
PINCTRL_PIN(39, "GPIO39/SMB3B_SDA/SMB22_SDA"),
@@ -2045,7 +2049,7 @@ static int npcm8xx_gpio_request_enable(struct pinctrl_dev *pctldev,
const unsigned int *pin = &offset;
int mode = fn_gpio;
- if (pin[0] >= 183 && pin[0] <= 189)
+ if ((pin[0] >= 183 && pin[0] <= 189) || pin[0] == 35 || pin[0] == 36)
mode = pincfg[pin[0]].fn0;
npcm8xx_setfunc(npcm->gcr_regmap, &offset, 1, mode);
--
2.34.1
next prev parent reply other threads:[~2024-07-12 5:11 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-07-11 19:37 [PATCH v1 0/7] pinctrl: npcm8xx: pin configuration changes Tomer Maimon
2024-07-11 19:37 ` Tomer Maimon
2024-07-11 19:37 ` [PATCH v1 1/7] pinctrl: nuvoton: npcm8xx: clear polarity before set both edge Tomer Maimon
2024-07-11 19:37 ` Tomer Maimon
2024-07-11 19:37 ` Tomer Maimon [this message]
2024-07-11 19:37 ` [PATCH v1 2/7] pinctrl: nuvoton: npcm8xx: add gpi35 and gpi36 Tomer Maimon
2024-07-11 19:37 ` [PATCH v1 3/7] pinctrl: nuvoton: npcm8xx: add pin 250 to DDR pins group Tomer Maimon
2024-07-11 19:37 ` Tomer Maimon
2024-07-11 19:37 ` [PATCH v1 4/7] pinctrl: nuvoton: npcm8xx: remove unused smb4den pin, group, function Tomer Maimon
2024-07-11 19:37 ` Tomer Maimon
2024-07-12 17:45 ` J. Neuschäfer
2024-07-12 17:45 ` J. Neuschäfer
2024-07-16 14:24 ` Tomer Maimon
2024-07-16 14:24 ` Tomer Maimon
2024-07-18 20:58 ` J. Neuschäfer
2024-07-18 20:58 ` J. Neuschäfer
2024-07-18 22:05 ` Tomer Maimon
2024-07-18 22:05 ` Tomer Maimon
2024-07-11 19:37 ` [PATCH v1 5/7] pinctrl: nuvoton: npcm8xx: remove unused lpcclk " Tomer Maimon
2024-07-11 19:37 ` Tomer Maimon
2024-07-11 19:37 ` [PATCH v1 6/7] pinctrl: nuvoton: npcm8xx: modify clkrun and serirq pin configuration Tomer Maimon
2024-07-11 19:37 ` Tomer Maimon
2024-07-11 19:37 ` [PATCH v1 7/7] pinctrl: nuvoton: npcm8xx: modify pins flags Tomer Maimon
2024-07-11 19:37 ` Tomer Maimon
2024-07-13 12:35 ` [PATCH v1 0/7] pinctrl: npcm8xx: pin configuration changes Jonas Gorski
2024-07-13 12:35 ` Jonas Gorski
2024-07-16 14:24 ` Tomer Maimon
2024-07-16 14:24 ` Tomer Maimon
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20240711193749.2397471-3-tmaimon77@gmail.com \
--to=tmaimon77@gmail.com \
--cc=avifishman70@gmail.com \
--cc=benjaminfair@google.com \
--cc=joel@jms.id.au \
--cc=linus.walleij@linaro.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=openbmc@lists.ozlabs.org \
--cc=tali.perry1@gmail.com \
--cc=venture@google.com \
--cc=yuenn@google.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.