From: Lothar Rubusch <l.rubusch@gmail.com>
To: lars@metafoo.de, Michael.Hennerich@analog.com, jic23@kernel.org,
linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: l.rubusch@gmx.ch, Lothar Rubusch <l.rubusch@gmail.com>
Subject: [PATCH 14/22] iio: accel: adxl345: read FIFO entries
Date: Thu, 14 Nov 2024 23:09:54 +0000 [thread overview]
Message-ID: <20241114231002.98595-15-l.rubusch@gmail.com> (raw)
In-Reply-To: <20241114231002.98595-1-l.rubusch@gmail.com>
Add a function to read the elements of the adxl345 FIFO. This will
flush the FIFO, and brings it into a ready state. The read out
is used to read the elemnts and to reset the fifo again. The cleanup
equally needs a read on the INT_SOURCE register.
Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
---
drivers/iio/accel/adxl345_core.c | 30 ++++++++++++++++++++++++++++--
1 file changed, 28 insertions(+), 2 deletions(-)
diff --git a/drivers/iio/accel/adxl345_core.c b/drivers/iio/accel/adxl345_core.c
index dbd07308a7..57bca112ea 100644
--- a/drivers/iio/accel/adxl345_core.c
+++ b/drivers/iio/accel/adxl345_core.c
@@ -140,6 +140,8 @@ struct adxl34x_state {
const struct adxl345_chip_info *info;
struct regmap *regmap;
struct adxl34x_platform_data data; /* watermark, fifo_mode, etc */
+
+ __le16 fifo_buf[3 * ADXL34x_FIFO_SIZE] __aligned(IIO_DMA_MINALIGN);
u8 int_map;
bool fifo_delay; /* delay: delay is needed for SPI */
u8 intio;
@@ -321,6 +323,27 @@ static const struct attribute_group adxl345_attrs_group = {
.attrs = adxl345_attrs,
};
+/**
+ * Read number of FIFO entries into *fifo_entries
+ */
+static int adxl345_get_fifo_entries(struct adxl34x_state *st, int *fifo_entries)
+{
+ unsigned int regval = 0;
+ int ret;
+
+ ret = regmap_read(st->regmap, ADXL345_REG_FIFO_STATUS, ®val);
+ if (ret) {
+ pr_warn("%s(): Failed to read FIFO_STATUS register\n", __func__);
+ *fifo_entries = 0;
+ return ret;
+ }
+
+ *fifo_entries = 0x3f & regval;
+ pr_debug("%s(): fifo_entries %d\n", __func__, *fifo_entries);
+
+ return 0;
+}
+
static const struct iio_buffer_setup_ops adxl345_buffer_ops = {
};
@@ -362,6 +385,7 @@ static irqreturn_t adxl345_trigger_handler(int irq, void *p)
struct iio_dev *indio_dev = ((struct iio_poll_func *) p)->indio_dev;
struct adxl34x_state *st = iio_priv(indio_dev);
u8 int_stat;
+ int fifo_entries;
int ret;
ret = adxl345_get_status(st, &int_stat);
@@ -379,9 +403,11 @@ static irqreturn_t adxl345_trigger_handler(int irq, void *p)
goto done;
}
- if (int_stat & (ADXL345_INT_DATA_READY | ADXL345_INT_WATERMARK))
+ if (int_stat & (ADXL345_INT_DATA_READY | ADXL345_INT_WATERMARK)) {
pr_debug("%s(): WATERMARK or DATA_READY event detected\n", __func__);
-
+ if (adxl345_get_fifo_entries(st, &fifo_entries) < 0)
+ goto done;
+ }
goto done;
done:
--
2.39.2
next prev parent reply other threads:[~2024-11-14 23:10 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-11-14 23:09 [PATCH 00/22] iio: accel: adxl345: add FIFO operating with IRQ triggered watermark events Lothar Rubusch
2024-11-14 23:09 ` [PATCH 01/22] iio: accel: adxl345: fix comment on probe Lothar Rubusch
2024-11-14 23:09 ` [PATCH 02/22] iio: accel: adxl345: rename variable data to st Lothar Rubusch
2024-11-14 23:09 ` [PATCH 03/22] iio: accel: adxl345: rename struct adxl34x_state Lothar Rubusch
2024-11-14 23:09 ` [PATCH 04/22] iio: accel: adxl345: rename to adxl34x_channels Lothar Rubusch
2024-11-14 23:09 ` [PATCH 05/22] iio: accel: adxl345: measure right-justified Lothar Rubusch
2024-11-14 23:09 ` [PATCH 06/22] iio: accel: adxl345: add function to switch measuring Lothar Rubusch
2024-11-17 5:37 ` kernel test robot
2024-11-14 23:09 ` [PATCH 07/22] iio: accel: adxl345: initialize IRQ number Lothar Rubusch
2024-11-14 23:09 ` [PATCH 08/22] iio: accel: adxl345: initialize FIFO delay value for SPI Lothar Rubusch
2024-11-14 23:09 ` [PATCH 09/22] iio: accel: adxl345: unexpose private defines Lothar Rubusch
2024-11-14 23:09 ` [PATCH 10/22] iio: accel: adxl345: set interrupt line to INT1 Lothar Rubusch
2024-11-14 23:09 ` [PATCH 11/22] iio: accel: adxl345: import adxl345 general data Lothar Rubusch
2024-11-14 23:09 ` [PATCH 12/22] iio: accel: adxl345: elaborate iio channel definition Lothar Rubusch
2024-11-14 23:09 ` [PATCH 13/22] iio: accel: adxl345: add trigger handler Lothar Rubusch
2024-11-14 23:09 ` Lothar Rubusch [this message]
2024-11-14 23:09 ` [PATCH 15/22] iio: accel: adxl345: reset the FIFO on error Lothar Rubusch
2024-11-17 0:45 ` kernel test robot
2024-11-17 7:12 ` kernel test robot
2024-11-17 15:49 ` kernel test robot
2024-11-14 23:09 ` [PATCH 16/22] iio: accel: adxl345: register trigger ops Lothar Rubusch
2024-11-14 23:09 ` [PATCH 17/22] iio: accel: adxl345: push FIFO data to iio Lothar Rubusch
2024-11-14 23:09 ` [PATCH 18/22] iio: accel: adxl345: start measure at buffer en/disable Lothar Rubusch
2024-11-14 23:09 ` [PATCH 19/22] iio: accel: adxl345: prepare FIFO watermark handling Lothar Rubusch
2024-11-14 23:10 ` [PATCH 20/22] iio: accel: adxl345: use FIFO with watermark IRQ Lothar Rubusch
2024-11-14 23:10 ` [PATCH 21/22] iio: accel: adxl345: sync FIFO reading with sensor Lothar Rubusch
2024-11-14 23:10 ` [PATCH 22/22] iio: accel: adxl345: add debug printout Lothar Rubusch
2024-11-17 18:35 ` kernel test robot
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20241114231002.98595-15-l.rubusch@gmail.com \
--to=l.rubusch@gmail.com \
--cc=Michael.Hennerich@analog.com \
--cc=jic23@kernel.org \
--cc=l.rubusch@gmx.ch \
--cc=lars@metafoo.de \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.