All of lore.kernel.org
 help / color / mirror / Atom feed
From: Lothar Rubusch <l.rubusch@gmail.com>
To: lars@metafoo.de, Michael.Hennerich@analog.com, jic23@kernel.org,
	linux-iio@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: l.rubusch@gmx.ch, Lothar Rubusch <l.rubusch@gmail.com>
Subject: [PATCH 22/22] iio: accel: adxl345: add debug printout
Date: Thu, 14 Nov 2024 23:10:02 +0000	[thread overview]
Message-ID: <20241114231002.98595-23-l.rubusch@gmail.com> (raw)
In-Reply-To: <20241114231002.98595-1-l.rubusch@gmail.com>

Add debug prints to allow to debug the sensor based on dynamic debug.

Signed-off-by: Lothar Rubusch <l.rubusch@gmail.com>
---
 drivers/iio/accel/adxl345_core.c | 95 ++++++++++++++++++++++++++++++++
 1 file changed, 95 insertions(+)

diff --git a/drivers/iio/accel/adxl345_core.c b/drivers/iio/accel/adxl345_core.c
index 8025dfeb84..e416a50dd0 100644
--- a/drivers/iio/accel/adxl345_core.c
+++ b/drivers/iio/accel/adxl345_core.c
@@ -26,6 +26,9 @@
 
 #include "adxl345.h"
 
+/* debugging registers */
+#define DEBUG_ADXL345 0
+
 /* ADXL345 register map */
 #define ADXL345_REG_DEVID		0x00 /* r    Device ID */
 #define ADXL345_REG_THRESH_TAP	0x1D /* r/w  Tap Threshold */
@@ -181,6 +184,78 @@ static const struct iio_chan_spec adxl34x_channels[] = {
 	ADXL34x_CHANNEL(2, chan_z, Z),
 };
 
+/*
+ * Debugging
+ */
+
+__maybe_unused
+static void adxl345_debug_registers(const char *func, struct adxl34x_state *st)
+{
+#if DEBUG_ADXL345 == 1
+	struct regmap *regmap = st->regmap;
+	unsigned int regval = 0;
+
+	regmap_read(regmap, ADXL345_REG_THRESH_TAP, &regval);
+	pr_debug("%s(): DEBUG - 0x%02X\t- ADXL345_REG_THRESH_TAP\n",
+			func, 0xff & regval);
+
+	regmap_read(regmap, ADXL345_REG_DUR, &regval);
+	pr_debug("%s(): DEBUG - 0x%02X\t- ADXL345_REG_DUR\n",
+			func, 0xff & regval);
+
+	regmap_read(regmap, ADXL345_REG_LATENT, &regval);
+	pr_debug("%s(): DEBUG - 0x%02X\t- ADXL345_REG_LATENT\n",
+			func, 0xff & regval);
+
+	regmap_read(regmap, ADXL345_REG_WINDOW, &regval);
+	pr_debug("%s(): DEBUG - 0x%02X\t- ADXL345_REG_WINDOW\n",
+			func, 0xff & regval);
+
+	regmap_read(regmap, ADXL345_REG_ACT_TAP_STATUS, &regval);
+	pr_debug("%s(): DEBUG - 0x%02X\t- ADXL345_REG_ACT_TAP_STATUS\n",
+			func, 0xff & regval);
+
+	regmap_read(regmap, ADXL345_REG_POWER_CTL, &regval);
+	pr_debug("%s(): DEBUG - 0x%02X\t- ADXL345_REG_POWER_CTL\n",
+			func, 0xff & regval);
+
+	regmap_read(regmap, ADXL345_REG_INT_ENABLE, &regval);
+	pr_debug("%s(): DEBUG - 0x%02X\t- ADXL345_REG_INT_ENABLE\n",
+			func, 0xff & regval);
+
+	regmap_read(regmap, ADXL345_REG_INT_MAP, &regval);
+	pr_debug("%s(): DEBUG - 0x%02X\t- ADXL345_REG_INT_MAP\n",
+			func, 0xff & regval);
+
+	regmap_read(regmap, ADXL345_REG_INT_SOURCE, &regval);
+	pr_debug("%s(): DEBUG - 0x%02X\t- ADXL345_REG_INT_SOURCE\n",
+			func, 0xff & regval);
+
+	regmap_read(regmap, ADXL345_REG_FIFO_CTL, &regval);
+	pr_debug("%s(): DEBUG - 0x%02X\t- ADXL345_REG_FIFO_CTL\n",
+			func, 0xff & regval);
+
+	regmap_read(regmap, ADXL345_REG_FIFO_STATUS, &regval);
+	pr_debug("%s(): DEBUG - 0x%02X\t- ADXL345_REG_FIFO_STATUS\n",
+			func, 0xff & regval);
+# endif
+}
+
+__maybe_unused
+static void adxl345_debug_fifo(const char *func, s16 *fifo_buf, int entries_line)
+{
+#if DEBUG_ADXL345 == 1
+	s16 xval, yval, zval;
+
+	xval = fifo_buf[0 + entries_line];
+	yval = fifo_buf[1 + entries_line];
+	zval = fifo_buf[2 + entries_line];
+
+	pr_debug("%s(): FIFO[%d] - x=%d, y=%d, z=%d\n",
+		func, entries_line/3, xval, yval, zval);
+#endif
+}
+
 static int adxl345_set_interrupts(struct adxl34x_state *st)
 {
 	int ret;
@@ -513,6 +588,8 @@ static int adxl345_read_fifo_elements(struct adxl34x_state *st, int fifo_entries
 	size_t count, ndirs = 3;
 	int i, ret;
 
+	pr_debug("%s(): fifo_entries = %d\n", __func__, fifo_entries);
+
 	count = 2 * ndirs; /* 2 byte per direction */
 	for (i = 0; i < fifo_entries; i++) {
 		ret = regmap_noinc_read(st->regmap, ADXL345_REG_XYZ_BASE,
@@ -522,6 +599,7 @@ static int adxl345_read_fifo_elements(struct adxl34x_state *st, int fifo_entries
 			return -EFAULT;
 		}
 	}
+	adxl345_debug_registers(__func__, st);
 
 	return 0;
 }
@@ -639,6 +717,7 @@ static int adxl345_push_fifo_data(struct iio_dev *indio_dev,
 		if (st->fifo_delay && (fifo_entries > 1))
 			udelay(3);
 
+		adxl345_debug_fifo(__func__, st->fifo_buf, i);
 		iio_push_to_buffers(indio_dev, &st->fifo_buf[i]);
 	}
 
@@ -666,6 +745,7 @@ static int adxl345_trig_dready(struct iio_trigger *trig, bool state)
 			 __func__, st->int_map);
 	}
 
+	adxl345_debug_registers(__func__, st);
 	return 0;
 }
 
@@ -697,6 +777,7 @@ static irqreturn_t adxl345_trigger_handler(int irq, void *p)
 	int fifo_entries;
 	int ret;
 
+	pr_debug("%s(): IRQ caught!\n", __func__);
 	ret = adxl345_get_status(st, &int_stat);
 	if (ret < 0)
 		goto err;
@@ -731,6 +812,7 @@ static irqreturn_t adxl345_trigger_handler(int irq, void *p)
 
 	goto done;
 err:
+	pr_debug("%s(): error termination\n", __func__);
 	iio_trigger_notify_done(indio_dev->trig);
 	adxl345_set_measure_en(st, false);
 	adxl345_empty_fifo(st);
@@ -738,6 +820,7 @@ static irqreturn_t adxl345_trigger_handler(int irq, void *p)
 	return IRQ_NONE;
 
 done:
+	pr_debug("%s(): regular termination\n", __func__);
 	return IRQ_HANDLED;
 }
 
@@ -788,6 +871,9 @@ int adxl345_core_probe(struct device *dev, struct regmap *regmap,
 	st = iio_priv(indio_dev);
 	st->regmap = regmap;
 
+	dev_dbg(dev, "irq '%d'\n", irq);
+	if (!irq) /* fall back to bypass mode w/o IRQ */
+		dev_dbg(dev, "no IRQ, FIFO mode will stay in BYPASS_MODE\n");
 	st->irq = irq;
 	st->info = device_get_match_data(dev);
 	if (!st->info)
@@ -815,7 +901,11 @@ int adxl345_core_probe(struct device *dev, struct regmap *regmap,
 	indio_dev->channels = adxl34x_channels;
 	indio_dev->num_channels = ARRAY_SIZE(adxl34x_channels);
 
+	dev_dbg(dev, "setting up indio_dev ok\n");
+
 	if (setup) {
+		dev_dbg(dev, "setup() was provided\n");
+
 		/* Perform optional initial bus specific configuration */
 		ret = setup(dev, st->regmap);
 		if (ret)
@@ -830,6 +920,8 @@ int adxl345_core_probe(struct device *dev, struct regmap *regmap,
 					     "Failed to set data range\n");
 
 	} else {
+		dev_dbg(dev, "No setup() provided\n");
+
 		/* Enable full-resolution mode (init all data_format bits) */
 		ret = regmap_write(st->regmap, ADXL345_REG_DATA_FORMAT,
 				   ADXL345_DATA_FORMAT_FULL_RES);
@@ -838,6 +930,7 @@ int adxl345_core_probe(struct device *dev, struct regmap *regmap,
 					     "Failed to set data range\n");
 	}
 
+	dev_dbg(dev, "Retrieving DEVID\n");
 	ret = regmap_read(st->regmap, ADXL345_REG_DEVID, &regval);
 	if (ret < 0)
 		return dev_err_probe(dev, ret, "Error reading device ID\n");
@@ -845,7 +938,9 @@ int adxl345_core_probe(struct device *dev, struct regmap *regmap,
 	if (regval != ADXL345_DEVID)
 		return dev_err_probe(dev, -ENODEV, "Invalid device ID: %x, expected %x\n",
 				     regval, ADXL345_DEVID);
+	dev_dbg(dev, "Retrieving DEVID ok\n");
 
+	dev_dbg(dev, "Registering power down function\n");
 	ret = devm_add_action_or_reset(dev, adxl345_powerdown, st);
 	if (ret < 0)
 		return dev_err_probe(dev, ret, "Failed to add action or reset\n");
-- 
2.39.2


  parent reply	other threads:[~2024-11-14 23:10 UTC|newest]

Thread overview: 28+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2024-11-14 23:09 [PATCH 00/22] iio: accel: adxl345: add FIFO operating with IRQ triggered watermark events Lothar Rubusch
2024-11-14 23:09 ` [PATCH 01/22] iio: accel: adxl345: fix comment on probe Lothar Rubusch
2024-11-14 23:09 ` [PATCH 02/22] iio: accel: adxl345: rename variable data to st Lothar Rubusch
2024-11-14 23:09 ` [PATCH 03/22] iio: accel: adxl345: rename struct adxl34x_state Lothar Rubusch
2024-11-14 23:09 ` [PATCH 04/22] iio: accel: adxl345: rename to adxl34x_channels Lothar Rubusch
2024-11-14 23:09 ` [PATCH 05/22] iio: accel: adxl345: measure right-justified Lothar Rubusch
2024-11-14 23:09 ` [PATCH 06/22] iio: accel: adxl345: add function to switch measuring Lothar Rubusch
2024-11-17  5:37   ` kernel test robot
2024-11-14 23:09 ` [PATCH 07/22] iio: accel: adxl345: initialize IRQ number Lothar Rubusch
2024-11-14 23:09 ` [PATCH 08/22] iio: accel: adxl345: initialize FIFO delay value for SPI Lothar Rubusch
2024-11-14 23:09 ` [PATCH 09/22] iio: accel: adxl345: unexpose private defines Lothar Rubusch
2024-11-14 23:09 ` [PATCH 10/22] iio: accel: adxl345: set interrupt line to INT1 Lothar Rubusch
2024-11-14 23:09 ` [PATCH 11/22] iio: accel: adxl345: import adxl345 general data Lothar Rubusch
2024-11-14 23:09 ` [PATCH 12/22] iio: accel: adxl345: elaborate iio channel definition Lothar Rubusch
2024-11-14 23:09 ` [PATCH 13/22] iio: accel: adxl345: add trigger handler Lothar Rubusch
2024-11-14 23:09 ` [PATCH 14/22] iio: accel: adxl345: read FIFO entries Lothar Rubusch
2024-11-14 23:09 ` [PATCH 15/22] iio: accel: adxl345: reset the FIFO on error Lothar Rubusch
2024-11-17  0:45   ` kernel test robot
2024-11-17  7:12   ` kernel test robot
2024-11-17 15:49   ` kernel test robot
2024-11-14 23:09 ` [PATCH 16/22] iio: accel: adxl345: register trigger ops Lothar Rubusch
2024-11-14 23:09 ` [PATCH 17/22] iio: accel: adxl345: push FIFO data to iio Lothar Rubusch
2024-11-14 23:09 ` [PATCH 18/22] iio: accel: adxl345: start measure at buffer en/disable Lothar Rubusch
2024-11-14 23:09 ` [PATCH 19/22] iio: accel: adxl345: prepare FIFO watermark handling Lothar Rubusch
2024-11-14 23:10 ` [PATCH 20/22] iio: accel: adxl345: use FIFO with watermark IRQ Lothar Rubusch
2024-11-14 23:10 ` [PATCH 21/22] iio: accel: adxl345: sync FIFO reading with sensor Lothar Rubusch
2024-11-14 23:10 ` Lothar Rubusch [this message]
2024-11-17 18:35   ` [PATCH 22/22] iio: accel: adxl345: add debug printout kernel test robot

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20241114231002.98595-23-l.rubusch@gmail.com \
    --to=l.rubusch@gmail.com \
    --cc=Michael.Hennerich@analog.com \
    --cc=jic23@kernel.org \
    --cc=l.rubusch@gmx.ch \
    --cc=lars@metafoo.de \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.