[PATCH v3 20/28] test/qtest/hace: Adjust test address range for AST1030 due to SRAM limitations

[Jamin Lin via <qemu-arm@nongnu.org>]

The digest_addr is set to "src_addr + 0x1000000", where src_addr is the DRAM
base address. However, the value 0x1000000 (16MB) is too large because the
AST1030 does not support DRAM, and its SRAM size is only 768KB.

A range size of 0x10000 (64KB) is sufficient for HACE test cases, as the test
vector size does not exceed 64KB.

Updates:
1. Direct Access Mode
Update digest_addr to "src_addr + 0x10000" in the following functions:
aspeed_test_md5
aspeed_test_sha256
aspeed_test_sha512

2. Scatter-Gather (SG) Mode
Update source address for different SG buffer addresses in the following
functions:
src_addr1 = src_addr + 0x10000
src_addr2 = src_addr + 0x20000
src_addr3 = src_addr + 0x30000
digest_addr = src_addr + 0x40000

aspeed_test_sha256_sg
aspeed_test_sha512_sg

3. ACC Mode Update
Update the SG List start address: src_addr + 0x10000
Update the SG List buffer size to 0x30000 (192KB).

buffer_addr = src_addr + 0x10000
digest_addr = src_addr + 0x40000

Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
---
 tests/qtest/aspeed-hace-utils.c | 30 +++++++++++++++---------------
 1 file changed, 15 insertions(+), 15 deletions(-)

diff --git a/tests/qtest/aspeed-hace-utils.c b/tests/qtest/aspeed-hace-utils.c
index 777fa5b986..539d06e4f8 100644
--- a/tests/qtest/aspeed-hace-utils.c
+++ b/tests/qtest/aspeed-hace-utils.c
@@ -132,7 +132,7 @@ void aspeed_test_md5(const char *machine, const uint32_t base,
 {
     QTestState *s = qtest_init(machine);
 
-    uint32_t digest_addr = src_addr + 0x01000000;
+    uint32_t digest_addr = src_addr + 0x010000;
     uint8_t digest[16] = {0};
 
     /* Check engine is idle, no busy or irq bits set */
@@ -166,7 +166,7 @@ void aspeed_test_sha256(const char *machine, const uint32_t base,
 {
     QTestState *s = qtest_init(machine);
 
-    const uint32_t digest_addr = src_addr + 0x1000000;
+    const uint32_t digest_addr = src_addr + 0x10000;
     uint8_t digest[32] = {0};
 
     /* Check engine is idle, no busy or irq bits set */
@@ -200,7 +200,7 @@ void aspeed_test_sha512(const char *machine, const uint32_t base,
 {
     QTestState *s = qtest_init(machine);
 
-    const uint32_t digest_addr = src_addr + 0x1000000;
+    const uint32_t digest_addr = src_addr + 0x10000;
     uint8_t digest[64] = {0};
 
     /* Check engine is idle, no busy or irq bits set */
@@ -234,10 +234,10 @@ void aspeed_test_sha256_sg(const char *machine, const uint32_t base,
 {
     QTestState *s = qtest_init(machine);
 
-    const uint32_t src_addr_1 = src_addr + 0x1000000;
-    const uint32_t src_addr_2 = src_addr + 0x2000000;
-    const uint32_t src_addr_3 = src_addr + 0x3000000;
-    const uint32_t digest_addr = src_addr + 0x4000000;
+    const uint32_t src_addr_1 = src_addr + 0x10000;
+    const uint32_t src_addr_2 = src_addr + 0x20000;
+    const uint32_t src_addr_3 = src_addr + 0x30000;
+    const uint32_t digest_addr = src_addr + 0x40000;
     uint8_t digest[32] = {0};
     struct AspeedSgList array[] = {
         {  cpu_to_le32(sizeof(test_vector_sg1)),
@@ -285,10 +285,10 @@ void aspeed_test_sha512_sg(const char *machine, const uint32_t base,
 {
     QTestState *s = qtest_init(machine);
 
-    const uint32_t src_addr_1 = src_addr + 0x1000000;
-    const uint32_t src_addr_2 = src_addr + 0x2000000;
-    const uint32_t src_addr_3 = src_addr + 0x3000000;
-    const uint32_t digest_addr = src_addr + 0x4000000;
+    const uint32_t src_addr_1 = src_addr + 0x10000;
+    const uint32_t src_addr_2 = src_addr + 0x20000;
+    const uint32_t src_addr_3 = src_addr + 0x30000;
+    const uint32_t digest_addr = src_addr + 0x40000;
     uint8_t digest[64] = {0};
     struct AspeedSgList array[] = {
         {  cpu_to_le32(sizeof(test_vector_sg1)),
@@ -336,8 +336,8 @@ void aspeed_test_sha256_accum(const char *machine, const uint32_t base,
 {
     QTestState *s = qtest_init(machine);
 
-    const uint32_t buffer_addr = src_addr + 0x1000000;
-    const uint32_t digest_addr = src_addr + 0x4000000;
+    const uint32_t buffer_addr = src_addr + 0x10000;
+    const uint32_t digest_addr = src_addr + 0x40000;
     uint8_t digest[32] = {0};
     struct AspeedSgList array[] = {
         {  cpu_to_le32(sizeof(test_vector_accum_256) | SG_LIST_LEN_LAST),
@@ -377,8 +377,8 @@ void aspeed_test_sha512_accum(const char *machine, const uint32_t base,
 {
     QTestState *s = qtest_init(machine);
 
-    const uint32_t buffer_addr = src_addr + 0x1000000;
-    const uint32_t digest_addr = src_addr + 0x4000000;
+    const uint32_t buffer_addr = src_addr + 0x10000;
+    const uint32_t digest_addr = src_addr + 0x40000;
     uint8_t digest[64] = {0};
     struct AspeedSgList array[] = {
         {  cpu_to_le32(sizeof(test_vector_accum_512) | SG_LIST_LEN_LAST),
-- 
2.43.0