From: Laurent Pinchart <laurent.pinchart@ideasonboard.com>
To: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Cc: "Niklas Söderlund" <niklas.soderlund@ragnatech.se>,
"Mauro Carvalho Chehab" <mchehab@kernel.org>,
"Sakari Ailus" <sakari.ailus@linux.intel.com>,
linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
linux-kernel@vger.kernel.org,
"Niklas Söderlund" <niklas.soderlund+renesas@ragnatech.se>,
"Mauro Carvalho Chehab" <mchehab+huawei@kernel.org>,
"Jacopo Mondi" <jacopo.mondi@ideasonboard.com>
Subject: Re: [PATCH v3 14/15] media: rcar-csi2: Add full streams support
Date: Mon, 2 Jun 2025 16:54:53 +0300 [thread overview]
Message-ID: <20250602135453.GC23515@pendragon.ideasonboard.com> (raw)
In-Reply-To: <20250530-rcar-streams-v3-14-026655df7138@ideasonboard.com>
Hi Tomi,
Thank you for the patch.
On Fri, May 30, 2025 at 04:50:43PM +0300, Tomi Valkeinen wrote:
> Add the missing pieces to enable full streams support:
>
> - Add set_routing
> - Drop the explicit uses of a single stream, and instead use the streams
> mask.
>
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
> ---
> drivers/media/platform/renesas/rcar-csi2.c | 85 ++++++++++++++++++++++--------
> 1 file changed, 63 insertions(+), 22 deletions(-)
>
> diff --git a/drivers/media/platform/renesas/rcar-csi2.c b/drivers/media/platform/renesas/rcar-csi2.c
> index 8f708196ef49..4a73d223229c 100644
> --- a/drivers/media/platform/renesas/rcar-csi2.c
> +++ b/drivers/media/platform/renesas/rcar-csi2.c
> @@ -694,6 +694,17 @@ static const struct rcar_csi2_format rcar_csi2_formats[] = {
> },
> };
>
> +static const struct v4l2_mbus_framefmt rcar_csi2_default_fmt = {
> + .width = 1920,
> + .height = 1080,
> + .code = MEDIA_BUS_FMT_RGB888_1X24,
> + .colorspace = V4L2_COLORSPACE_SRGB,
> + .field = V4L2_FIELD_NONE,
> + .ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT,
> + .quantization = V4L2_QUANTIZATION_DEFAULT,
> + .xfer_func = V4L2_XFER_FUNC_DEFAULT,
> +};
> +
> static const struct rcar_csi2_format *rcsi2_code_to_fmt(unsigned int code)
> {
> unsigned int i;
> @@ -1641,10 +1652,8 @@ static int rcsi2_enable_streams(struct v4l2_subdev *sd,
> u64 source_streams_mask)
> {
> struct rcar_csi2 *priv = sd_to_csi2(sd);
> - int ret = 0;
> -
> - if (source_streams_mask != 1)
> - return -EINVAL;
> + u64 sink_streams;
> + int ret;
>
> if (!priv->remote)
> return -ENODEV;
> @@ -1655,8 +1664,13 @@ static int rcsi2_enable_streams(struct v4l2_subdev *sd,
> return ret;
> }
>
> + sink_streams = v4l2_subdev_state_xlate_streams(state,
> + RCAR_CSI2_SOURCE_VC0,
> + RCAR_CSI2_SINK,
> + &source_streams_mask);
> +
> ret = v4l2_subdev_enable_streams(priv->remote, priv->remote_pad,
> - BIT_ULL(0));
> + sink_streams);
> if (ret) {
> rcsi2_stop(priv);
> return ret;
> @@ -1672,10 +1686,7 @@ static int rcsi2_disable_streams(struct v4l2_subdev *sd,
> u32 source_pad, u64 source_streams_mask)
> {
> struct rcar_csi2 *priv = sd_to_csi2(sd);
> - int ret = 0;
> -
> - if (source_streams_mask != 1)
> - return -EINVAL;
> + u64 sink_streams;
>
> if (!priv->remote)
> return -ENODEV;
> @@ -1683,11 +1694,17 @@ static int rcsi2_disable_streams(struct v4l2_subdev *sd,
> if (priv->stream_count == 1)
> rcsi2_stop(priv);
>
> - v4l2_subdev_disable_streams(priv->remote, priv->remote_pad, BIT_ULL(0));
> + sink_streams = v4l2_subdev_state_xlate_streams(state,
> + RCAR_CSI2_SOURCE_VC0,
> + RCAR_CSI2_SINK,
> + &source_streams_mask);
> +
> + v4l2_subdev_disable_streams(priv->remote, priv->remote_pad,
> + sink_streams);
>
> priv->stream_count -= 1;
>
> - return ret;
> + return 0;
This seems to belong to a previous patch.
> }
>
> static int rcsi2_set_pad_format(struct v4l2_subdev *sd,
> @@ -1720,6 +1737,40 @@ static int rcsi2_set_pad_format(struct v4l2_subdev *sd,
> return 0;
> }
>
> +static int rcsi2_set_routing(struct v4l2_subdev *sd,
> + struct v4l2_subdev_state *state,
> + enum v4l2_subdev_format_whence which,
> + struct v4l2_subdev_krouting *routing)
> +{
> + struct rcar_csi2 *priv = sd_to_csi2(sd);
> + int ret;
> +
> + if (!priv->info->use_isp)
> + return -ENOTTY;
> +
> + if (routing->num_routes > V4L2_FRAME_DESC_ENTRY_MAX)
> + return -EINVAL;
A comment to explain this check would be nice.
> +
> + if (priv->info->use_isp) {
You return an error above when this condition is false.
> + ret = v4l2_subdev_routing_validate(sd, routing,
> + V4L2_SUBDEV_ROUTING_ONLY_1_TO_1);
> + } else {
> + ret = v4l2_subdev_routing_validate(sd, routing,
> + V4L2_SUBDEV_ROUTING_ONLY_1_TO_1 |
> + V4L2_SUBDEV_ROUTING_NO_SOURCE_MULTIPLEXING);
> + }
> +
> + if (ret)
> + return ret;
> +
> + ret = v4l2_subdev_set_routing_with_fmt(sd, state, routing,
> + &rcar_csi2_default_fmt);
> + if (ret)
> + return ret;
> +
> + return 0;
> +}
> +
> static int rcsi2_get_frame_desc_fallback(struct v4l2_subdev *sd,
> unsigned int pad,
> struct v4l2_mbus_frame_desc *fd)
> @@ -1781,6 +1832,7 @@ static const struct v4l2_subdev_pad_ops rcar_csi2_pad_ops = {
> .set_fmt = rcsi2_set_pad_format,
> .get_fmt = v4l2_subdev_get_fmt,
>
> + .set_routing = rcsi2_set_routing,
> .get_frame_desc = rcsi2_get_frame_desc,
> };
>
> @@ -1801,17 +1853,6 @@ static int rcsi2_init_state(struct v4l2_subdev *sd,
> },
> };
>
> - static const struct v4l2_mbus_framefmt rcar_csi2_default_fmt = {
> - .width = 1920,
> - .height = 1080,
> - .code = MEDIA_BUS_FMT_RGB888_1X24,
> - .colorspace = V4L2_COLORSPACE_SRGB,
> - .field = V4L2_FIELD_NONE,
> - .ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT,
> - .quantization = V4L2_QUANTIZATION_DEFAULT,
> - .xfer_func = V4L2_XFER_FUNC_DEFAULT,
> - };
> -
> static const struct v4l2_subdev_krouting routing = {
> .num_routes = ARRAY_SIZE(routes),
> .routes = routes,
--
Regards,
Laurent Pinchart
next prev parent reply other threads:[~2025-06-02 13:55 UTC|newest]
Thread overview: 57+ messages / expand[flat|nested] mbox.gz Atom feed top
2025-05-30 13:50 [PATCH v3 00/15] media: rcar: Streams support Tomi Valkeinen
2025-05-30 13:50 ` [PATCH v3 01/15] media: rcar-csi2: Use the pad version of v4l2_get_link_freq() Tomi Valkeinen
2025-06-02 9:43 ` Laurent Pinchart
2025-07-02 15:07 ` Niklas Söderlund
2025-07-02 20:51 ` Laurent Pinchart
2025-06-06 11:57 ` Niklas Söderlund
2025-05-30 13:50 ` [PATCH v3 02/15] media: rcar-isp: Improve ISPPROCMODE_DT_PROC_MODE_VC Tomi Valkeinen
2025-06-02 9:43 ` Laurent Pinchart
2025-06-06 11:58 ` Niklas Söderlund
2025-05-30 13:50 ` [PATCH v3 03/15] media: rcar-isp: Move {enable|disable}_streams() calls Tomi Valkeinen
2025-06-02 9:43 ` Laurent Pinchart
2025-09-26 11:22 ` Tomi Valkeinen
2025-09-27 6:17 ` Niklas Söderlund
2025-12-16 12:48 ` Tomi Valkeinen
2025-05-30 13:50 ` [PATCH v3 04/15] media: rcar-csi2: " Tomi Valkeinen
2025-06-02 9:43 ` Laurent Pinchart
2025-05-30 13:50 ` [PATCH v3 05/15] media: rcar-csi2: Move rcar2_calc_mbps() Tomi Valkeinen
2025-06-02 14:03 ` Laurent Pinchart
2025-06-06 12:03 ` Niklas Söderlund
2025-05-30 13:50 ` [PATCH v3 06/15] media: rcar-csi2: Simplify rcsi2_calc_mbps() Tomi Valkeinen
2025-06-02 9:43 ` Laurent Pinchart
2025-06-06 12:02 ` Niklas Söderlund
2025-05-30 13:50 ` [PATCH v3 07/15] media: rcar-csi2: Optimize rcsi2_calc_mbps() Tomi Valkeinen
2025-06-02 9:43 ` Laurent Pinchart
2025-06-06 12:07 ` Niklas Söderlund
2025-12-08 14:03 ` Tomi Valkeinen
2025-05-30 13:50 ` [PATCH v3 08/15] media: rcar-csi2: Switch to Streams API Tomi Valkeinen
2025-06-02 14:06 ` Laurent Pinchart
2025-12-16 13:15 ` Tomi Valkeinen
2025-06-06 12:09 ` Niklas Söderlund
2025-05-30 13:50 ` [PATCH v3 09/15] media: rcar-isp: " Tomi Valkeinen
2025-06-02 14:17 ` Laurent Pinchart
2025-06-06 12:10 ` Niklas Söderlund
2025-05-30 13:50 ` [PATCH v3 10/15] media: rcar-csi2: Add .get_frame_desc op Tomi Valkeinen
2025-06-02 9:44 ` Laurent Pinchart
2025-06-06 12:14 ` Niklas Söderlund
2025-12-16 13:18 ` Tomi Valkeinen
2025-12-16 13:22 ` Tomi Valkeinen
2025-05-30 13:50 ` [PATCH v3 11/15] media: rcar-isp: Call get_frame_desc to find out VC & DT Tomi Valkeinen
2025-06-02 13:22 ` Laurent Pinchart
2025-12-16 11:57 ` Tomi Valkeinen
2025-06-06 12:20 ` Niklas Söderlund
2025-12-16 13:35 ` Tomi Valkeinen
2025-05-30 13:50 ` [PATCH v3 12/15] media: rcar-csi2: Add more stream support to rcsi2_calc_mbps() Tomi Valkeinen
2025-06-02 13:28 ` Laurent Pinchart
2025-12-16 12:45 ` Tomi Valkeinen
2025-06-06 12:25 ` Niklas Söderlund
2025-05-30 13:50 ` [PATCH v3 13/15] media: rcar-csi2: Call get_frame_desc to find out VC & DT (Gen3) Tomi Valkeinen
2025-06-02 13:49 ` Laurent Pinchart
2025-12-16 12:58 ` Tomi Valkeinen
2025-05-30 13:50 ` [PATCH v3 14/15] media: rcar-csi2: Add full streams support Tomi Valkeinen
2025-06-02 13:54 ` Laurent Pinchart [this message]
2025-12-16 13:03 ` Tomi Valkeinen
2025-05-30 13:50 ` [PATCH v3 15/15] media: rcar-isp: " Tomi Valkeinen
2025-06-02 13:57 ` Laurent Pinchart
2025-12-16 13:11 ` Tomi Valkeinen
2025-06-06 12:32 ` [PATCH v3 00/15] media: rcar: Streams support Niklas Söderlund
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20250602135453.GC23515@pendragon.ideasonboard.com \
--to=laurent.pinchart@ideasonboard.com \
--cc=jacopo.mondi@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=mchehab+huawei@kernel.org \
--cc=mchehab@kernel.org \
--cc=niklas.soderlund+renesas@ragnatech.se \
--cc=niklas.soderlund@ragnatech.se \
--cc=sakari.ailus@linux.intel.com \
--cc=tomi.valkeinen+renesas@ideasonboard.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.