Re: [PATCH v3 12/15] media: rcar-csi2: Add more stream support to rcsi2_calc_mbps()

["Niklas Söderlund" <niklas.soderlund@ragnatech.se>]

Hi Tomi,

Thanks for your patch.

On 2025-05-30 16:50:41 +0300, Tomi Valkeinen wrote:
> In the case where link-freq is not available, make sure we fail if there
> are more than one stream configured, and also use the correct stream
> number for that single stream.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>

With Laurent's comments addressed,

Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

> ---
>  drivers/media/platform/renesas/rcar-csi2.c | 7 ++++++-
>  1 file changed, 6 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/media/platform/renesas/rcar-csi2.c b/drivers/media/platform/renesas/rcar-csi2.c
> index 65c7f3040696..b9f83aae725a 100644
> --- a/drivers/media/platform/renesas/rcar-csi2.c
> +++ b/drivers/media/platform/renesas/rcar-csi2.c
> @@ -1018,17 +1018,22 @@ static int rcsi2_calc_mbps(struct rcar_csi2 *priv,
>  	 */
>  	freq = v4l2_get_link_freq(remote_pad, 0, 0);
>  	if (freq < 0) {
> +		struct v4l2_subdev_route *route = &state->routing.routes[0];
>  		const struct rcar_csi2_format *format;
>  		struct v4l2_mbus_framefmt *fmt;
>  		unsigned int lanes;
>  		unsigned int bpp;
>  		int ret;
>  
> +		if (state->routing.num_routes > 1)
> +			return -EINVAL;
> +
>  		ret = rcsi2_get_active_lanes(priv, &lanes);
>  		if (ret)
>  			return ret;
>  
> -		fmt = v4l2_subdev_state_get_format(state, RCAR_CSI2_SINK, 0);
> +		fmt = v4l2_subdev_state_get_format(state, route->sink_pad,
> +						   route->sink_stream);
>  		if (!fmt)
>  			return -EINVAL;
>  
> 
> -- 
> 2.43.0
> 

-- 
Kind Regards,
Niklas Söderlund