All of lore.kernel.org
 help / color / mirror / Atom feed
From: "Niklas Söderlund" <niklas.soderlund@ragnatech.se>
To: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>
Cc: Mauro Carvalho Chehab <mchehab@kernel.org>,
	Sakari Ailus <sakari.ailus@linux.intel.com>,
	linux-media@vger.kernel.org, linux-renesas-soc@vger.kernel.org,
	linux-kernel@vger.kernel.org,
	Mauro Carvalho Chehab <mchehab+huawei@kernel.org>,
	Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
	Jacopo Mondi <jacopo.mondi@ideasonboard.com>
Subject: Re: [PATCH v3 09/15] media: rcar-isp: Switch to Streams API
Date: Fri, 6 Jun 2025 14:10:45 +0200	[thread overview]
Message-ID: <20250606121045.GF2770609@ragnatech.se> (raw)
In-Reply-To: <20250530-rcar-streams-v3-9-026655df7138@ideasonboard.com>

Hi Tomi,

Thanks for your work.

On 2025-05-30 16:50:38 +0300, Tomi Valkeinen wrote:
> Switch to Streams API with a single hardcoded route. This breaks any
> existing userspace which depended on the custom rcar streams
> implementation, but a single camera use case should continue to work.
> 
> Signed-off-by: Tomi Valkeinen <tomi.valkeinen+renesas@ideasonboard.com>

Reviewed-by: Niklas Söderlund <niklas.soderlund+renesas@ragnatech.se>

> ---
>  drivers/media/platform/renesas/rcar-isp/csisp.c | 62 ++++++++++++++++++++++---
>  1 file changed, 55 insertions(+), 7 deletions(-)
> 
> diff --git a/drivers/media/platform/renesas/rcar-isp/csisp.c b/drivers/media/platform/renesas/rcar-isp/csisp.c
> index 2337c5d44c40..a04cbf96b809 100644
> --- a/drivers/media/platform/renesas/rcar-isp/csisp.c
> +++ b/drivers/media/platform/renesas/rcar-isp/csisp.c
> @@ -124,6 +124,17 @@ static const struct rcar_isp_format rcar_isp_formats[] = {
>  	},
>  };
>  
> +static const struct v4l2_mbus_framefmt risp_default_fmt = {
> +	.width = 1920,
> +	.height = 1080,
> +	.code = MEDIA_BUS_FMT_RGB888_1X24,
> +	.colorspace = V4L2_COLORSPACE_SRGB,
> +	.field = V4L2_FIELD_NONE,
> +	.ycbcr_enc = V4L2_YCBCR_ENC_DEFAULT,
> +	.quantization = V4L2_QUANTIZATION_DEFAULT,
> +	.xfer_func = V4L2_XFER_FUNC_DEFAULT,
> +};
> +
>  static const struct rcar_isp_format *risp_code_to_fmt(unsigned int code)
>  {
>  	unsigned int i;
> @@ -222,7 +233,7 @@ static int risp_start(struct rcar_isp *isp, struct v4l2_subdev_state *state)
>  	u32 sel_csi = 0;
>  	int ret;
>  
> -	fmt = v4l2_subdev_state_get_format(state, RCAR_ISP_SINK);
> +	fmt = v4l2_subdev_state_get_format(state, RCAR_ISP_SINK, 0);
>  	if (!fmt)
>  		return -EINVAL;
>  
> @@ -336,7 +347,7 @@ static int risp_set_pad_format(struct v4l2_subdev *sd,
>  			       struct v4l2_subdev_state *state,
>  			       struct v4l2_subdev_format *format)
>  {
> -	struct v4l2_mbus_framefmt *framefmt;
> +	struct v4l2_mbus_framefmt *fmt;
>  
>  	if (format->pad > RCAR_ISP_SINK)
>  		return v4l2_subdev_get_fmt(sd, state, format);
> @@ -344,10 +355,20 @@ static int risp_set_pad_format(struct v4l2_subdev *sd,
>  	if (!risp_code_to_fmt(format->format.code))
>  		format->format.code = rcar_isp_formats[0].code;
>  
> -	for (unsigned int i = 0; i < RCAR_ISP_NUM_PADS; i++) {
> -		framefmt = v4l2_subdev_state_get_format(state, i);
> -		*framefmt = format->format;
> -	}
> +	/* Set sink format */
> +	fmt = v4l2_subdev_state_get_format(state, format->pad, format->stream);
> +	if (!fmt)
> +		return -EINVAL;
> +
> +	*fmt = format->format;
> +
> +	/* Propagate to source format */
> +	fmt = v4l2_subdev_state_get_opposite_stream_format(state, format->pad,
> +							   format->stream);
> +	if (!fmt)
> +		return -EINVAL;
> +
> +	*fmt = format->format;
>  
>  	return 0;
>  }
> @@ -364,6 +385,32 @@ static const struct v4l2_subdev_ops rcar_isp_subdev_ops = {
>  	.pad	= &risp_pad_ops,
>  };
>  
> +static int risp_init_state(struct v4l2_subdev *sd,
> +			   struct v4l2_subdev_state *state)
> +{
> +	static struct v4l2_subdev_route routes[] = {
> +		{
> +			.sink_pad = RCAR_ISP_SINK,
> +			.sink_stream = 0,
> +			.source_pad = RCAR_ISP_PORT0,
> +			.source_stream = 0,
> +			.flags = V4L2_SUBDEV_ROUTE_FL_ACTIVE,
> +		},
> +	};
> +
> +	static const struct v4l2_subdev_krouting routing = {
> +		.num_routes = ARRAY_SIZE(routes),
> +		.routes = routes,
> +	};
> +
> +	return v4l2_subdev_set_routing_with_fmt(sd, state, &routing,
> +						&risp_default_fmt);
> +}
> +
> +static const struct v4l2_subdev_internal_ops risp_internal_ops = {
> +	.init_state = risp_init_state,
> +};
> +
>  /* -----------------------------------------------------------------------------
>   * Async handling and registration of subdevices and links
>   */
> @@ -521,11 +568,12 @@ static int risp_probe(struct platform_device *pdev)
>  
>  	isp->subdev.owner = THIS_MODULE;
>  	isp->subdev.dev = &pdev->dev;
> +	isp->subdev.internal_ops = &risp_internal_ops;
>  	v4l2_subdev_init(&isp->subdev, &rcar_isp_subdev_ops);
>  	v4l2_set_subdevdata(&isp->subdev, &pdev->dev);
>  	snprintf(isp->subdev.name, sizeof(isp->subdev.name), "%s %s",
>  		 KBUILD_MODNAME, dev_name(&pdev->dev));
> -	isp->subdev.flags = V4L2_SUBDEV_FL_HAS_DEVNODE;
> +	isp->subdev.flags = V4L2_SUBDEV_FL_HAS_DEVNODE | V4L2_SUBDEV_FL_STREAMS;
>  
>  	isp->subdev.entity.function = MEDIA_ENT_F_VID_MUX;
>  	isp->subdev.entity.ops = &risp_entity_ops;
> 
> -- 
> 2.43.0
> 

-- 
Kind Regards,
Niklas Söderlund

  parent reply	other threads:[~2025-06-06 12:10 UTC|newest]

Thread overview: 57+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2025-05-30 13:50 [PATCH v3 00/15] media: rcar: Streams support Tomi Valkeinen
2025-05-30 13:50 ` [PATCH v3 01/15] media: rcar-csi2: Use the pad version of v4l2_get_link_freq() Tomi Valkeinen
2025-06-02  9:43   ` Laurent Pinchart
2025-07-02 15:07     ` Niklas Söderlund
2025-07-02 20:51       ` Laurent Pinchart
2025-06-06 11:57   ` Niklas Söderlund
2025-05-30 13:50 ` [PATCH v3 02/15] media: rcar-isp: Improve ISPPROCMODE_DT_PROC_MODE_VC Tomi Valkeinen
2025-06-02  9:43   ` Laurent Pinchart
2025-06-06 11:58   ` Niklas Söderlund
2025-05-30 13:50 ` [PATCH v3 03/15] media: rcar-isp: Move {enable|disable}_streams() calls Tomi Valkeinen
2025-06-02  9:43   ` Laurent Pinchart
2025-09-26 11:22     ` Tomi Valkeinen
2025-09-27  6:17       ` Niklas Söderlund
2025-12-16 12:48     ` Tomi Valkeinen
2025-05-30 13:50 ` [PATCH v3 04/15] media: rcar-csi2: " Tomi Valkeinen
2025-06-02  9:43   ` Laurent Pinchart
2025-05-30 13:50 ` [PATCH v3 05/15] media: rcar-csi2: Move rcar2_calc_mbps() Tomi Valkeinen
2025-06-02 14:03   ` Laurent Pinchart
2025-06-06 12:03   ` Niklas Söderlund
2025-05-30 13:50 ` [PATCH v3 06/15] media: rcar-csi2: Simplify rcsi2_calc_mbps() Tomi Valkeinen
2025-06-02  9:43   ` Laurent Pinchart
2025-06-06 12:02   ` Niklas Söderlund
2025-05-30 13:50 ` [PATCH v3 07/15] media: rcar-csi2: Optimize rcsi2_calc_mbps() Tomi Valkeinen
2025-06-02  9:43   ` Laurent Pinchart
2025-06-06 12:07   ` Niklas Söderlund
2025-12-08 14:03     ` Tomi Valkeinen
2025-05-30 13:50 ` [PATCH v3 08/15] media: rcar-csi2: Switch to Streams API Tomi Valkeinen
2025-06-02 14:06   ` Laurent Pinchart
2025-12-16 13:15     ` Tomi Valkeinen
2025-06-06 12:09   ` Niklas Söderlund
2025-05-30 13:50 ` [PATCH v3 09/15] media: rcar-isp: " Tomi Valkeinen
2025-06-02 14:17   ` Laurent Pinchart
2025-06-06 12:10   ` Niklas Söderlund [this message]
2025-05-30 13:50 ` [PATCH v3 10/15] media: rcar-csi2: Add .get_frame_desc op Tomi Valkeinen
2025-06-02  9:44   ` Laurent Pinchart
2025-06-06 12:14   ` Niklas Söderlund
2025-12-16 13:18     ` Tomi Valkeinen
2025-12-16 13:22       ` Tomi Valkeinen
2025-05-30 13:50 ` [PATCH v3 11/15] media: rcar-isp: Call get_frame_desc to find out VC & DT Tomi Valkeinen
2025-06-02 13:22   ` Laurent Pinchart
2025-12-16 11:57     ` Tomi Valkeinen
2025-06-06 12:20   ` Niklas Söderlund
2025-12-16 13:35     ` Tomi Valkeinen
2025-05-30 13:50 ` [PATCH v3 12/15] media: rcar-csi2: Add more stream support to rcsi2_calc_mbps() Tomi Valkeinen
2025-06-02 13:28   ` Laurent Pinchart
2025-12-16 12:45     ` Tomi Valkeinen
2025-06-06 12:25   ` Niklas Söderlund
2025-05-30 13:50 ` [PATCH v3 13/15] media: rcar-csi2: Call get_frame_desc to find out VC & DT (Gen3) Tomi Valkeinen
2025-06-02 13:49   ` Laurent Pinchart
2025-12-16 12:58     ` Tomi Valkeinen
2025-05-30 13:50 ` [PATCH v3 14/15] media: rcar-csi2: Add full streams support Tomi Valkeinen
2025-06-02 13:54   ` Laurent Pinchart
2025-12-16 13:03     ` Tomi Valkeinen
2025-05-30 13:50 ` [PATCH v3 15/15] media: rcar-isp: " Tomi Valkeinen
2025-06-02 13:57   ` Laurent Pinchart
2025-12-16 13:11     ` Tomi Valkeinen
2025-06-06 12:32 ` [PATCH v3 00/15] media: rcar: Streams support Niklas Söderlund

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20250606121045.GF2770609@ragnatech.se \
    --to=niklas.soderlund@ragnatech.se \
    --cc=jacopo.mondi@ideasonboard.com \
    --cc=laurent.pinchart@ideasonboard.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-renesas-soc@vger.kernel.org \
    --cc=mchehab+huawei@kernel.org \
    --cc=mchehab@kernel.org \
    --cc=sakari.ailus@linux.intel.com \
    --cc=tomi.valkeinen+renesas@ideasonboard.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is an external index of several public inboxes,
see mirroring instructions on how to clone and mirror
all data and code used by this external index.