[PATCH 0/7] arm64: allwinner: a523: add USB3.0 support

[iuncuim <iuncuim@gmail.com>]

From: Mikhail Kalashnikov <iuncuim@gmail.com>

This series is a draft and does not include patches for dt-bindings.
The first series is necessary for testing on other devices and
initiating discussion.

This series of patches adds USB 3.0 functionality for the
A523/A527/H728/T527 processor.Most of the code is derived from the BSP,
 as the datasheet does not fully describe this feature.

I have verified functionality on two of my boards, walnutpi 2b (t527)
and x96qproplus (h728). When testing usb3.0 on x96qproplus, I get
reconnections of my nvme, it looks like the port does not provide enough
 current to work. I have encountered similar complaints from users of the
  device on Android. In the case of walnutpi, there is no such problem.

Based on 6.17-rc1

Mikhail Kalashnikov (7):
  clk: sunxi-ng: a523: add missing usb related clocks
  arm64: dts: allwinner: a523: add third usb2 phy
  phy: sun4i-usb: a523: add support for the USB2 PHY
  phy: allwinner: a523: add USB3/PCIe PHY driver
  arm64: dts: allwinner: a523: add USB3.0 phy node
  arm64: dts: allwinner: a523: add DWC3 USB3.0 node
  arm64: dts: allwinner: a523: activate USB3 for all boards

 .../arm64/boot/dts/allwinner/sun55i-a523.dtsi |  52 +++-
 .../dts/allwinner/sun55i-a527-cubie-a5e.dts   |   8 +
 .../dts/allwinner/sun55i-h728-x96qpro+.dts    |   8 +
 .../dts/allwinner/sun55i-t527-avaota-a1.dts   |   8 +
 drivers/clk/sunxi-ng/ccu-sun55i-a523.c        |  32 +++
 drivers/clk/sunxi-ng/ccu-sun55i-a523.h        |   2 +-
 drivers/phy/allwinner/Kconfig                 |   9 +
 drivers/phy/allwinner/Makefile                |   1 +
 drivers/phy/allwinner/phy-sun4i-usb.c         |  10 +
 drivers/phy/allwinner/phy-sun55i-usb3-pcie.c  | 267 ++++++++++++++++++
 include/dt-bindings/clock/sun55i-a523-ccu.h   |   4 +
 11 files changed, 392 insertions(+), 9 deletions(-)
 create mode 100644 drivers/phy/allwinner/phy-sun55i-usb3-pcie.c

-- 
2.50.1