[PATCH v3 3/5] riscv: dts: starfive: Add common board dtsi for VisionFive 2 Lite variants

[Hal Feng <hal.feng@starfivetech.com>]

Add common board dtsi for use by VisionFive 2 Lite variants.

Signed-off-by: Hal Feng <hal.feng@starfivetech.com>
---
 .../jh7110s-starfive-visionfive-2-lite.dtsi   | 691 ++++++++++++++++++
 1 file changed, 691 insertions(+)
 create mode 100644 arch/riscv/boot/dts/starfive/jh7110s-starfive-visionfive-2-lite.dtsi

diff --git a/arch/riscv/boot/dts/starfive/jh7110s-starfive-visionfive-2-lite.dtsi b/arch/riscv/boot/dts/starfive/jh7110s-starfive-visionfive-2-lite.dtsi
new file mode 100644
index 000000000000..aa375c4a3fa3
--- /dev/null
+++ b/arch/riscv/boot/dts/starfive/jh7110s-starfive-visionfive-2-lite.dtsi
@@ -0,0 +1,691 @@
+// SPDX-License-Identifier: GPL-2.0 OR MIT
+/*
+ * Copyright (C) 2025 StarFive Technology Co., Ltd.
+ * Copyright (C) 2025 Hal Feng <hal.feng@starfivetech.com>
+ */
+
+/dts-v1/;
+#include "jh7110.dtsi"
+#include "jh7110-pinfunc.h"
+#include <dt-bindings/gpio/gpio.h>
+#include <dt-bindings/leds/common.h>
+#include <dt-bindings/pinctrl/starfive,jh7110-pinctrl.h>
+
+/ {
+	aliases {
+		ethernet0 = &gmac0;
+		i2c0 = &i2c0;
+		i2c2 = &i2c2;
+		i2c5 = &i2c5;
+		i2c6 = &i2c6;
+		mmc0 = &mmc0;
+		mmc1 = &mmc1;
+		serial0 = &uart0;
+	};
+
+	chosen {
+		stdout-path = "serial0:115200n8";
+	};
+
+	memory@40000000 {
+		device_type = "memory";
+		reg = <0x0 0x40000000 0x1 0x0>;
+		bootph-pre-ram;
+	};
+
+	gpio-restart {
+		compatible = "gpio-restart";
+		gpios = <&sysgpio 35 GPIO_ACTIVE_HIGH>;
+		priority = <224>;
+	};
+
+	leds {
+		compatible = "gpio-leds";
+
+		led_status_power: led-0 {
+			gpios = <&aongpio 3 GPIO_ACTIVE_HIGH>;
+		};
+	};
+};
+
+&cpu_opp {
+	/delete-node/ opp-375000000;
+	/delete-node/ opp-500000000;
+	/delete-node/ opp-750000000;
+	/delete-node/ opp-1500000000;
+
+	opp-312500000 {
+		opp-hz = /bits/ 64 <312500000>;
+		opp-microvolt = <800000>;
+	};
+	opp-417000000 {
+		opp-hz = /bits/ 64 <417000000>;
+		opp-microvolt = <800000>;
+	};
+	opp-625000000 {
+		opp-hz = /bits/ 64 <625000000>;
+		opp-microvolt = <800000>;
+	};
+	opp-1250000000 {
+		opp-hz = /bits/ 64 <1250000000>;
+		opp-microvolt = <1000000>;
+	};
+};
+
+&cpus {
+	timebase-frequency = <4000000>;
+};
+
+&dvp_clk {
+	clock-frequency = <74250000>;
+};
+
+&gmac0_rgmii_rxin {
+	clock-frequency = <125000000>;
+};
+
+&gmac0_rmii_refin {
+	clock-frequency = <50000000>;
+};
+
+&gmac1_rgmii_rxin {
+	clock-frequency = <125000000>;
+};
+
+&gmac1_rmii_refin {
+	clock-frequency = <50000000>;
+};
+
+&hdmitx0_pixelclk {
+	clock-frequency = <297000000>;
+};
+
+&i2srx_bclk_ext {
+	clock-frequency = <12288000>;
+};
+
+&i2srx_lrck_ext {
+	clock-frequency = <192000>;
+};
+
+&i2stx_bclk_ext {
+	clock-frequency = <12288000>;
+};
+
+&i2stx_lrck_ext {
+	clock-frequency = <192000>;
+};
+
+&mclk_ext {
+	clock-frequency = <12288000>;
+};
+
+&osc {
+	clock-frequency = <24000000>;
+};
+
+&rtc_osc {
+	clock-frequency = <32768>;
+};
+
+&tdm_ext {
+	clock-frequency = <49152000>;
+};
+
+&camss {
+	assigned-clocks = <&ispcrg JH7110_ISPCLK_DOM4_APB_FUNC>,
+			  <&ispcrg JH7110_ISPCLK_MIPI_RX0_PXL>;
+	assigned-clock-rates = <49500000>, <198000000>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+		};
+
+		port@1 {
+			reg = <1>;
+
+			camss_from_csi2rx: endpoint {
+				remote-endpoint = <&csi2rx_to_camss>;
+			};
+		};
+	};
+};
+
+&csi2rx {
+	assigned-clocks = <&ispcrg JH7110_ISPCLK_VIN_SYS>;
+	assigned-clock-rates = <297000000>;
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+
+			/* remote MIPI sensor endpoint */
+		};
+
+		port@1 {
+			reg = <1>;
+
+			csi2rx_to_camss: endpoint {
+				remote-endpoint = <&camss_from_csi2rx>;
+			};
+		};
+	};
+};
+
+&gmac0 {
+	phy-handle = <&phy0>;
+	phy-mode = "rgmii-id";
+	starfive,tx-use-rgmii-clk;
+	assigned-clocks = <&aoncrg JH7110_AONCLK_GMAC0_TX>;
+	assigned-clock-parents = <&aoncrg JH7110_AONCLK_GMAC0_RMII_RTX>;
+	status = "okay";
+
+	mdio {
+		#address-cells = <1>;
+		#size-cells = <0>;
+		compatible = "snps,dwmac-mdio";
+
+		phy0: ethernet-phy@0 {
+			reg = <0>;
+			motorcomm,tx-clk-adj-enabled;
+			motorcomm,tx-clk-100-inverted;
+			motorcomm,tx-clk-1000-inverted;
+			motorcomm,rx-clk-drv-microamp = <3970>;
+			motorcomm,rx-data-drv-microamp = <2910>;
+			rx-internal-delay-ps = <1500>;
+			tx-internal-delay-ps = <1500>;
+		};
+	};
+};
+
+&i2c0 {
+	clock-frequency = <100000>;
+	i2c-sda-hold-time-ns = <300>;
+	i2c-sda-falling-time-ns = <510>;
+	i2c-scl-falling-time-ns = <510>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c0_pins>;
+	status = "okay";
+};
+
+&i2c2 {
+	clock-frequency = <100000>;
+	i2c-sda-hold-time-ns = <300>;
+	i2c-sda-falling-time-ns = <510>;
+	i2c-scl-falling-time-ns = <510>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c2_pins>;
+	status = "okay";
+};
+
+&i2c5 {
+	clock-frequency = <100000>;
+	i2c-sda-hold-time-ns = <300>;
+	i2c-sda-falling-time-ns = <510>;
+	i2c-scl-falling-time-ns = <510>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c5_pins>;
+	status = "okay";
+
+	axp15060: pmic@36 {
+		compatible = "x-powers,axp15060";
+		reg = <0x36>;
+		interrupt-controller;
+		#interrupt-cells = <1>;
+
+		regulators {
+			vcc_3v3: dcdc1 {
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-min-microvolt = <3300000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "vcc_3v3";
+			};
+
+			vdd_cpu: dcdc2 {
+				regulator-always-on;
+				regulator-min-microvolt = <500000>;
+				regulator-max-microvolt = <1540000>;
+				regulator-name = "vdd_cpu";
+			};
+
+			emmc_vdd: aldo4 {
+				regulator-boot-on;
+				regulator-always-on;
+				regulator-min-microvolt = <1800000>;
+				regulator-max-microvolt = <3300000>;
+				regulator-name = "emmc_vdd";
+			};
+		};
+	};
+
+	eeprom@50 {
+		compatible = "atmel,24c04";
+		reg = <0x50>;
+		bootph-pre-ram;
+		pagesize = <16>;
+	};
+};
+
+&i2c6 {
+	clock-frequency = <100000>;
+	i2c-sda-hold-time-ns = <300>;
+	i2c-sda-falling-time-ns = <510>;
+	i2c-scl-falling-time-ns = <510>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&i2c6_pins>;
+	status = "okay";
+};
+
+&mmc0 {
+	max-frequency = <100000000>;
+	assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO0_SDCARD>;
+	assigned-clock-rates = <50000000>;
+	bus-width = <8>;
+	bootph-pre-ram;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc0_pins>;
+	status = "okay";
+};
+
+&mmc1 {
+	max-frequency = <50000000>;
+	assigned-clocks = <&syscrg JH7110_SYSCLK_SDIO1_SDCARD>;
+	assigned-clock-rates = <50000000>;
+	bus-width = <4>;
+	bootph-pre-ram;
+	cap-sd-highspeed;
+	keep-power-in-suspend;
+	non-removable;
+	pinctrl-names = "default";
+	pinctrl-0 = <&mmc1_pins>;
+	status = "okay";
+};
+
+&pcie1 {
+	enable-gpios = <&sysgpio 27 GPIO_ACTIVE_HIGH>;
+	perst-gpios = <&sysgpio 28 GPIO_ACTIVE_LOW>;
+	phys = <&pciephy1>;
+	pinctrl-names = "default";
+	pinctrl-0 = <&pcie1_pins>;
+	status = "okay";
+};
+
+&pwm {
+	pinctrl-names = "default";
+	pinctrl-0 = <&pwm_pins>;
+	status = "okay";
+};
+
+&qspi {
+	#address-cells = <1>;
+	#size-cells = <0>;
+	status = "okay";
+
+	nor_flash: flash@0 {
+		compatible = "jedec,spi-nor";
+		reg = <0>;
+		bootph-pre-ram;
+		cdns,read-delay = <2>;
+		spi-max-frequency = <100000000>;
+		cdns,tshsl-ns = <1>;
+		cdns,tsd2d-ns = <1>;
+		cdns,tchsh-ns = <1>;
+		cdns,tslch-ns = <1>;
+
+		partitions {
+			compatible = "fixed-partitions";
+			#address-cells = <1>;
+			#size-cells = <1>;
+
+			spl@0 {
+				reg = <0x0 0xf0000>;
+			};
+			uboot-env@f0000 {
+				reg = <0xf0000 0x10000>;
+			};
+			uboot@100000 {
+				reg = <0x100000 0xf00000>;
+			};
+		};
+	};
+};
+
+&spi0 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&spi0_pins>;
+	status = "okay";
+};
+
+&syscrg {
+	assigned-clocks = <&syscrg JH7110_SYSCLK_CPU_ROOT>,
+			  <&syscrg JH7110_SYSCLK_BUS_ROOT>,
+			  <&syscrg JH7110_SYSCLK_PERH_ROOT>,
+			  <&syscrg JH7110_SYSCLK_QSPI_REF>,
+			  <&syscrg JH7110_SYSCLK_CPU_CORE>,
+			  <&pllclk JH7110_PLLCLK_PLL0_OUT>;
+	assigned-clock-parents = <&pllclk JH7110_PLLCLK_PLL0_OUT>,
+				 <&pllclk JH7110_PLLCLK_PLL2_OUT>,
+				 <&pllclk JH7110_PLLCLK_PLL2_OUT>,
+				 <&syscrg JH7110_SYSCLK_QSPI_REF_SRC>;
+	assigned-clock-rates = <0>, <0>, <0>, <0>, <500000000>, <1250000000>;
+};
+
+&sysgpio {
+	i2c0_pins: i2c0-0 {
+		i2c-pins {
+			pinmux = <GPIOMUX(57, GPOUT_LOW,
+					      GPOEN_SYS_I2C0_CLK,
+					      GPI_SYS_I2C0_CLK)>,
+				 <GPIOMUX(58, GPOUT_LOW,
+					      GPOEN_SYS_I2C0_DATA,
+					      GPI_SYS_I2C0_DATA)>;
+			bias-disable; /* external pull-up */
+			input-enable;
+			input-schmitt-enable;
+		};
+	};
+
+	i2c2_pins: i2c2-0 {
+		i2c-pins {
+			pinmux = <GPIOMUX(3, GPOUT_LOW,
+					     GPOEN_SYS_I2C2_CLK,
+					     GPI_SYS_I2C2_CLK)>,
+				 <GPIOMUX(2, GPOUT_LOW,
+					     GPOEN_SYS_I2C2_DATA,
+					     GPI_SYS_I2C2_DATA)>;
+			bias-disable; /* external pull-up */
+			input-enable;
+			input-schmitt-enable;
+		};
+	};
+
+	i2c5_pins: i2c5-0 {
+		bootph-pre-ram;
+
+		i2c-pins {
+			pinmux = <GPIOMUX(19, GPOUT_LOW,
+					      GPOEN_SYS_I2C5_CLK,
+					      GPI_SYS_I2C5_CLK)>,
+				 <GPIOMUX(20, GPOUT_LOW,
+					      GPOEN_SYS_I2C5_DATA,
+					      GPI_SYS_I2C5_DATA)>;
+			bias-disable; /* external pull-up */
+			bootph-pre-ram;
+			input-enable;
+			input-schmitt-enable;
+		};
+	};
+
+	i2c6_pins: i2c6-0 {
+		i2c-pins {
+			pinmux = <GPIOMUX(16, GPOUT_LOW,
+					      GPOEN_SYS_I2C6_CLK,
+					      GPI_SYS_I2C6_CLK)>,
+				 <GPIOMUX(17, GPOUT_LOW,
+					      GPOEN_SYS_I2C6_DATA,
+					      GPI_SYS_I2C6_DATA)>;
+			bias-disable; /* external pull-up */
+			input-enable;
+			input-schmitt-enable;
+		};
+	};
+
+	mmc0_pins: mmc0-0 {
+		mmc-pins {
+			pinmux = <PINMUX(PAD_SD0_CLK, 0)>,
+				 <PINMUX(PAD_SD0_CMD, 0)>,
+				 <PINMUX(PAD_SD0_DATA0, 0)>,
+				 <PINMUX(PAD_SD0_DATA1, 0)>,
+				 <PINMUX(PAD_SD0_DATA2, 0)>,
+				 <PINMUX(PAD_SD0_DATA3, 0)>,
+				 <PINMUX(PAD_SD0_DATA4, 0)>,
+				 <PINMUX(PAD_SD0_DATA5, 0)>,
+				 <PINMUX(PAD_SD0_DATA6, 0)>,
+				 <PINMUX(PAD_SD0_DATA7, 0)>;
+			bias-pull-up;
+			drive-strength = <12>;
+			input-enable;
+		};
+	};
+
+	mmc1_pins: mmc1-0 {
+		clk-pins {
+			pinmux = <GPIOMUX(10, GPOUT_SYS_SDIO1_CLK,
+					      GPOEN_ENABLE,
+					      GPI_NONE)>;
+			bias-pull-up;
+			drive-strength = <12>;
+			input-disable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+
+		mmc-pins {
+			pinmux = <GPIOMUX(9, GPOUT_SYS_SDIO1_CMD,
+					     GPOEN_SYS_SDIO1_CMD,
+					     GPI_SYS_SDIO1_CMD)>,
+				 <GPIOMUX(11, GPOUT_SYS_SDIO1_DATA0,
+					      GPOEN_SYS_SDIO1_DATA0,
+					      GPI_SYS_SDIO1_DATA0)>,
+				 <GPIOMUX(12, GPOUT_SYS_SDIO1_DATA1,
+					      GPOEN_SYS_SDIO1_DATA1,
+					      GPI_SYS_SDIO1_DATA1)>,
+				 <GPIOMUX(7, GPOUT_SYS_SDIO1_DATA2,
+					     GPOEN_SYS_SDIO1_DATA2,
+					     GPI_SYS_SDIO1_DATA2)>,
+				 <GPIOMUX(8, GPOUT_SYS_SDIO1_DATA3,
+					     GPOEN_SYS_SDIO1_DATA3,
+					     GPI_SYS_SDIO1_DATA3)>;
+			bias-pull-up;
+			drive-strength = <12>;
+			input-enable;
+			input-schmitt-enable;
+			slew-rate = <0>;
+		};
+	};
+
+	pcie1_pins: pcie1-0 {
+		clkreq-pins {
+			pinmux = <GPIOMUX(29, GPOUT_LOW,
+					      GPOEN_DISABLE,
+					      GPI_NONE)>;
+			bias-pull-down;
+			drive-strength = <2>;
+			input-enable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+
+		wake-pins {
+			pinmux = <GPIOMUX(21, GPOUT_LOW,
+				      GPOEN_DISABLE,
+					      GPI_NONE)>;
+			bias-pull-up;
+			drive-strength = <2>;
+			input-enable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+	};
+
+	pwm_pins: pwm-0 {
+		pwm-pins {
+			pinmux = <GPIOMUX(46, GPOUT_SYS_PWM_CHANNEL0,
+					      GPOEN_SYS_PWM0_CHANNEL0,
+					      GPI_NONE)>,
+				 <GPIOMUX(59, GPOUT_SYS_PWM_CHANNEL1,
+					      GPOEN_SYS_PWM0_CHANNEL1,
+					      GPI_NONE)>;
+			bias-disable;
+			drive-strength = <12>;
+			input-disable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+	};
+
+	spi0_pins: spi0-0 {
+		mosi-pins {
+			pinmux = <GPIOMUX(52, GPOUT_SYS_SPI0_TXD,
+					      GPOEN_ENABLE,
+					      GPI_NONE)>;
+			bias-disable;
+			input-disable;
+			input-schmitt-disable;
+		};
+
+		miso-pins {
+			pinmux = <GPIOMUX(53, GPOUT_LOW,
+					      GPOEN_DISABLE,
+					      GPI_SYS_SPI0_RXD)>;
+			bias-pull-up;
+			input-enable;
+			input-schmitt-enable;
+		};
+
+		sck-pins {
+			pinmux = <GPIOMUX(48, GPOUT_SYS_SPI0_CLK,
+					      GPOEN_ENABLE,
+					      GPI_SYS_SPI0_CLK)>;
+			bias-disable;
+			input-disable;
+			input-schmitt-disable;
+		};
+
+		ss-pins {
+			pinmux = <GPIOMUX(49, GPOUT_SYS_SPI0_FSS,
+					      GPOEN_ENABLE,
+					      GPI_SYS_SPI0_FSS)>;
+			bias-disable;
+			input-disable;
+			input-schmitt-disable;
+		};
+	};
+
+	uart0_pins: uart0-0 {
+		tx-pins {
+			pinmux = <GPIOMUX(5, GPOUT_SYS_UART0_TX,
+					     GPOEN_ENABLE,
+					     GPI_NONE)>;
+			bias-disable;
+			drive-strength = <12>;
+			input-disable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+
+		rx-pins {
+			pinmux = <GPIOMUX(6, GPOUT_LOW,
+					     GPOEN_DISABLE,
+					     GPI_SYS_UART0_RX)>;
+			bias-disable; /* external pull-up */
+			drive-strength = <2>;
+			input-enable;
+			input-schmitt-enable;
+			slew-rate = <0>;
+		};
+	};
+
+	uart1_pins: uart1-0 {
+		tx-pins {
+			pinmux = <GPIOMUX(22, GPOUT_SYS_UART1_TX,
+					      GPOEN_ENABLE,
+					      GPI_NONE)>;
+			bias-disable;
+			drive-strength = <12>;
+			input-disable;
+			input-schmitt-disable;
+			slew-rate = <0>;
+		};
+
+		rx-pins {
+			pinmux = <GPIOMUX(23, GPOUT_LOW,
+					      GPOEN_DISABLE,
+					      GPI_SYS_UART1_RX)>;
+			bias-pull-up;
+			drive-strength = <2>;
+			input-enable;
+			input-schmitt-enable;
+			slew-rate = <0>;
+		};
+
+		cts-pins {
+			pinmux = <GPIOMUX(24, GPOUT_LOW,
+					      GPOEN_DISABLE,
+					      GPI_SYS_UART1_CTS)>;
+			input-enable;
+		};
+
+		rts-pins {
+			pinmux = <GPIOMUX(25, GPOUT_SYS_UART1_RTS,
+					      GPOEN_ENABLE,
+					      GPI_NONE)>;
+			input-enable;
+		};
+	};
+
+	usb0_pins: usb0-0 {
+		power-pins {
+			pinmux = <GPIOMUX(26, GPOUT_HIGH,
+					      GPOEN_ENABLE,
+					      GPI_NONE)>;
+			input-disable;
+		};
+
+		switch-pins {
+			pinmux = <GPIOMUX(62, GPOUT_LOW,
+					      GPOEN_ENABLE,
+					      GPI_NONE)>;
+			input-disable;
+		};
+	};
+};
+
+&uart0 {
+	bootph-pre-ram;
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart0_pins>;
+	status = "okay";
+};
+
+&uart1 {
+	pinctrl-names = "default";
+	pinctrl-0 = <&uart1_pins>;
+	status = "okay";
+};
+
+&usb0 {
+	dr_mode = "host";
+	pinctrl-names = "default";
+	pinctrl-0 = <&usb0_pins>;
+	status = "okay";
+};
+
+&usb_cdns3 {
+	phys = <&usbphy0>, <&pciephy0>;
+	phy-names = "cdns3,usb2-phy", "cdns3,usb3-phy";
+};
+
+&U74_1 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&U74_2 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&U74_3 {
+	cpu-supply = <&vdd_cpu>;
+};
+
+&U74_4 {
+	cpu-supply = <&vdd_cpu>;
+};
-- 
2.43.2


_______________________________________________
linux-riscv mailing list
linux-riscv@lists.infradead.org
http://lists.infradead.org/mailman/listinfo/linux-riscv